mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 15:05:03 +07:00
1737cac693
The mvebu-mbus driver reads the SDRAM window registers, and make the information about the DRAM CS configuration available to device drivers using the mv_mbus_dram_info() API. This information is used by the DMA-capable device drivers to program their address decoding windows. Until now, we were basically providing the SDRAM window register details as is. However, it turns out that the DMA capability of the CESA cryptographic engine consists in doing DMA being the DRAM and the crypto SRAM mapped as a MBus window. For this case, it is very important that the SDRAM CS information does not overlap with the MBus bridge window. Therefore, this commit improves the mvebu-mbus driver to make sure we adjust the SDRAM CS information so that it doesn't overlap with the MBus bridge window. This problem was reported by Boris Brezillon, while working on the mv_cesa driver for Armada 37x/38x/XP. We use the memblock memory information to know where the usable RAM is located, as this information is guaranteed to be correct on all SoC variants. We could have used the MBus bridge window registers on Armada 370/XP, but they are not really used on Armada 375/38x (Cortex-A9 based), since the PL310 L2 filtering is used instead to discriminate between RAM accesses and I/O accesses. Therefore, using the memblock information is more generic and works accross the different platforms. Reported-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> [Andrew Lunn <andrew@lunn.ch>: Fixed merge conflict] Signed-off-by: Andrew Lunn <andrew@lunn.ch>
1281 lines
34 KiB
C
1281 lines
34 KiB
C
/*
|
|
* Address map functions for Marvell EBU SoCs (Kirkwood, Armada
|
|
* 370/XP, Dove, Orion5x and MV78xx0)
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*
|
|
* The Marvell EBU SoCs have a configurable physical address space:
|
|
* the physical address at which certain devices (PCIe, NOR, NAND,
|
|
* etc.) sit can be configured. The configuration takes place through
|
|
* two sets of registers:
|
|
*
|
|
* - One to configure the access of the CPU to the devices. Depending
|
|
* on the families, there are between 8 and 20 configurable windows,
|
|
* each can be use to create a physical memory window that maps to a
|
|
* specific device. Devices are identified by a tuple (target,
|
|
* attribute).
|
|
*
|
|
* - One to configure the access to the CPU to the SDRAM. There are
|
|
* either 2 (for Dove) or 4 (for other families) windows to map the
|
|
* SDRAM into the physical address space.
|
|
*
|
|
* This driver:
|
|
*
|
|
* - Reads out the SDRAM address decoding windows at initialization
|
|
* time, and fills the mvebu_mbus_dram_info structure with these
|
|
* informations. The exported function mv_mbus_dram_info() allow
|
|
* device drivers to get those informations related to the SDRAM
|
|
* address decoding windows. This is because devices also have their
|
|
* own windows (configured through registers that are part of each
|
|
* device register space), and therefore the drivers for Marvell
|
|
* devices have to configure those device -> SDRAM windows to ensure
|
|
* that DMA works properly.
|
|
*
|
|
* - Provides an API for platform code or device drivers to
|
|
* dynamically add or remove address decoding windows for the CPU ->
|
|
* device accesses. This API is mvebu_mbus_add_window_by_id(),
|
|
* mvebu_mbus_add_window_remap_by_id() and
|
|
* mvebu_mbus_del_window().
|
|
*
|
|
* - Provides a debugfs interface in /sys/kernel/debug/mvebu-mbus/ to
|
|
* see the list of CPU -> SDRAM windows and their configuration
|
|
* (file 'sdram') and the list of CPU -> devices windows and their
|
|
* configuration (file 'devices').
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/mbus.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/syscore_ops.h>
|
|
#include <linux/memblock.h>
|
|
|
|
/*
|
|
* DDR target is the same on all platforms.
|
|
*/
|
|
#define TARGET_DDR 0
|
|
|
|
/*
|
|
* CPU Address Decode Windows registers
|
|
*/
|
|
#define WIN_CTRL_OFF 0x0000
|
|
#define WIN_CTRL_ENABLE BIT(0)
|
|
#define WIN_CTRL_SYNCBARRIER BIT(1)
|
|
#define WIN_CTRL_TGT_MASK 0xf0
|
|
#define WIN_CTRL_TGT_SHIFT 4
|
|
#define WIN_CTRL_ATTR_MASK 0xff00
|
|
#define WIN_CTRL_ATTR_SHIFT 8
|
|
#define WIN_CTRL_SIZE_MASK 0xffff0000
|
|
#define WIN_CTRL_SIZE_SHIFT 16
|
|
#define WIN_BASE_OFF 0x0004
|
|
#define WIN_BASE_LOW 0xffff0000
|
|
#define WIN_BASE_HIGH 0xf
|
|
#define WIN_REMAP_LO_OFF 0x0008
|
|
#define WIN_REMAP_LOW 0xffff0000
|
|
#define WIN_REMAP_HI_OFF 0x000c
|
|
|
|
#define UNIT_SYNC_BARRIER_OFF 0x84
|
|
#define UNIT_SYNC_BARRIER_ALL 0xFFFF
|
|
|
|
#define ATTR_HW_COHERENCY (0x1 << 4)
|
|
|
|
#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
|
|
#define DDR_BASE_CS_HIGH_MASK 0xf
|
|
#define DDR_BASE_CS_LOW_MASK 0xff000000
|
|
#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
|
|
#define DDR_SIZE_ENABLED BIT(0)
|
|
#define DDR_SIZE_CS_MASK 0x1c
|
|
#define DDR_SIZE_CS_SHIFT 2
|
|
#define DDR_SIZE_MASK 0xff000000
|
|
|
|
#define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4)
|
|
|
|
/* Relative to mbusbridge_base */
|
|
#define MBUS_BRIDGE_CTRL_OFF 0x0
|
|
#define MBUS_BRIDGE_SIZE_MASK 0xffff0000
|
|
#define MBUS_BRIDGE_BASE_OFF 0x4
|
|
#define MBUS_BRIDGE_BASE_MASK 0xffff0000
|
|
|
|
/* Maximum number of windows, for all known platforms */
|
|
#define MBUS_WINS_MAX 20
|
|
|
|
struct mvebu_mbus_state;
|
|
|
|
struct mvebu_mbus_soc_data {
|
|
unsigned int num_wins;
|
|
bool has_mbus_bridge;
|
|
unsigned int (*win_cfg_offset)(const int win);
|
|
unsigned int (*win_remap_offset)(const int win);
|
|
void (*setup_cpu_target)(struct mvebu_mbus_state *s);
|
|
int (*save_cpu_target)(struct mvebu_mbus_state *s,
|
|
u32 *store_addr);
|
|
int (*show_cpu_target)(struct mvebu_mbus_state *s,
|
|
struct seq_file *seq, void *v);
|
|
};
|
|
|
|
/*
|
|
* Used to store the state of one MBus window accross suspend/resume.
|
|
*/
|
|
struct mvebu_mbus_win_data {
|
|
u32 ctrl;
|
|
u32 base;
|
|
u32 remap_lo;
|
|
u32 remap_hi;
|
|
};
|
|
|
|
struct mvebu_mbus_state {
|
|
void __iomem *mbuswins_base;
|
|
void __iomem *sdramwins_base;
|
|
void __iomem *mbusbridge_base;
|
|
phys_addr_t sdramwins_phys_base;
|
|
struct dentry *debugfs_root;
|
|
struct dentry *debugfs_sdram;
|
|
struct dentry *debugfs_devs;
|
|
struct resource pcie_mem_aperture;
|
|
struct resource pcie_io_aperture;
|
|
const struct mvebu_mbus_soc_data *soc;
|
|
int hw_io_coherency;
|
|
|
|
/* Used during suspend/resume */
|
|
u32 mbus_bridge_ctrl;
|
|
u32 mbus_bridge_base;
|
|
struct mvebu_mbus_win_data wins[MBUS_WINS_MAX];
|
|
};
|
|
|
|
static struct mvebu_mbus_state mbus_state;
|
|
|
|
static struct mbus_dram_target_info mvebu_mbus_dram_info;
|
|
const struct mbus_dram_target_info *mv_mbus_dram_info(void)
|
|
{
|
|
return &mvebu_mbus_dram_info;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
|
|
|
|
/* Checks whether the given window has remap capability */
|
|
static bool mvebu_mbus_window_is_remappable(struct mvebu_mbus_state *mbus,
|
|
const int win)
|
|
{
|
|
return mbus->soc->win_remap_offset(win) != MVEBU_MBUS_NO_REMAP;
|
|
}
|
|
|
|
/*
|
|
* Functions to manipulate the address decoding windows
|
|
*/
|
|
|
|
static void mvebu_mbus_read_window(struct mvebu_mbus_state *mbus,
|
|
int win, int *enabled, u64 *base,
|
|
u32 *size, u8 *target, u8 *attr,
|
|
u64 *remap)
|
|
{
|
|
void __iomem *addr = mbus->mbuswins_base +
|
|
mbus->soc->win_cfg_offset(win);
|
|
u32 basereg = readl(addr + WIN_BASE_OFF);
|
|
u32 ctrlreg = readl(addr + WIN_CTRL_OFF);
|
|
|
|
if (!(ctrlreg & WIN_CTRL_ENABLE)) {
|
|
*enabled = 0;
|
|
return;
|
|
}
|
|
|
|
*enabled = 1;
|
|
*base = ((u64)basereg & WIN_BASE_HIGH) << 32;
|
|
*base |= (basereg & WIN_BASE_LOW);
|
|
*size = (ctrlreg | ~WIN_CTRL_SIZE_MASK) + 1;
|
|
|
|
if (target)
|
|
*target = (ctrlreg & WIN_CTRL_TGT_MASK) >> WIN_CTRL_TGT_SHIFT;
|
|
|
|
if (attr)
|
|
*attr = (ctrlreg & WIN_CTRL_ATTR_MASK) >> WIN_CTRL_ATTR_SHIFT;
|
|
|
|
if (remap) {
|
|
if (mvebu_mbus_window_is_remappable(mbus, win)) {
|
|
u32 remap_low, remap_hi;
|
|
void __iomem *addr_rmp = mbus->mbuswins_base +
|
|
mbus->soc->win_remap_offset(win);
|
|
remap_low = readl(addr_rmp + WIN_REMAP_LO_OFF);
|
|
remap_hi = readl(addr_rmp + WIN_REMAP_HI_OFF);
|
|
*remap = ((u64)remap_hi << 32) | remap_low;
|
|
} else
|
|
*remap = 0;
|
|
}
|
|
}
|
|
|
|
static void mvebu_mbus_disable_window(struct mvebu_mbus_state *mbus,
|
|
int win)
|
|
{
|
|
void __iomem *addr;
|
|
|
|
addr = mbus->mbuswins_base + mbus->soc->win_cfg_offset(win);
|
|
writel(0, addr + WIN_BASE_OFF);
|
|
writel(0, addr + WIN_CTRL_OFF);
|
|
|
|
if (mvebu_mbus_window_is_remappable(mbus, win)) {
|
|
addr = mbus->mbuswins_base + mbus->soc->win_remap_offset(win);
|
|
writel(0, addr + WIN_REMAP_LO_OFF);
|
|
writel(0, addr + WIN_REMAP_HI_OFF);
|
|
}
|
|
}
|
|
|
|
/* Checks whether the given window number is available */
|
|
|
|
static int mvebu_mbus_window_is_free(struct mvebu_mbus_state *mbus,
|
|
const int win)
|
|
{
|
|
void __iomem *addr = mbus->mbuswins_base +
|
|
mbus->soc->win_cfg_offset(win);
|
|
u32 ctrl = readl(addr + WIN_CTRL_OFF);
|
|
|
|
return !(ctrl & WIN_CTRL_ENABLE);
|
|
}
|
|
|
|
/*
|
|
* Checks whether the given (base, base+size) area doesn't overlap an
|
|
* existing region
|
|
*/
|
|
static int mvebu_mbus_window_conflicts(struct mvebu_mbus_state *mbus,
|
|
phys_addr_t base, size_t size,
|
|
u8 target, u8 attr)
|
|
{
|
|
u64 end = (u64)base + size;
|
|
int win;
|
|
|
|
for (win = 0; win < mbus->soc->num_wins; win++) {
|
|
u64 wbase, wend;
|
|
u32 wsize;
|
|
u8 wtarget, wattr;
|
|
int enabled;
|
|
|
|
mvebu_mbus_read_window(mbus, win,
|
|
&enabled, &wbase, &wsize,
|
|
&wtarget, &wattr, NULL);
|
|
|
|
if (!enabled)
|
|
continue;
|
|
|
|
wend = wbase + wsize;
|
|
|
|
/*
|
|
* Check if the current window overlaps with the
|
|
* proposed physical range
|
|
*/
|
|
if ((u64)base < wend && end > wbase)
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int mvebu_mbus_find_window(struct mvebu_mbus_state *mbus,
|
|
phys_addr_t base, size_t size)
|
|
{
|
|
int win;
|
|
|
|
for (win = 0; win < mbus->soc->num_wins; win++) {
|
|
u64 wbase;
|
|
u32 wsize;
|
|
int enabled;
|
|
|
|
mvebu_mbus_read_window(mbus, win,
|
|
&enabled, &wbase, &wsize,
|
|
NULL, NULL, NULL);
|
|
|
|
if (!enabled)
|
|
continue;
|
|
|
|
if (base == wbase && size == wsize)
|
|
return win;
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus,
|
|
int win, phys_addr_t base, size_t size,
|
|
phys_addr_t remap, u8 target,
|
|
u8 attr)
|
|
{
|
|
void __iomem *addr = mbus->mbuswins_base +
|
|
mbus->soc->win_cfg_offset(win);
|
|
u32 ctrl, remap_addr;
|
|
|
|
if (!is_power_of_2(size)) {
|
|
WARN(true, "Invalid MBus window size: 0x%zx\n", size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if ((base & (phys_addr_t)(size - 1)) != 0) {
|
|
WARN(true, "Invalid MBus base/size: %pa len 0x%zx\n", &base,
|
|
size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) |
|
|
(attr << WIN_CTRL_ATTR_SHIFT) |
|
|
(target << WIN_CTRL_TGT_SHIFT) |
|
|
WIN_CTRL_SYNCBARRIER |
|
|
WIN_CTRL_ENABLE;
|
|
|
|
writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF);
|
|
writel(ctrl, addr + WIN_CTRL_OFF);
|
|
|
|
if (mvebu_mbus_window_is_remappable(mbus, win)) {
|
|
void __iomem *addr_rmp = mbus->mbuswins_base +
|
|
mbus->soc->win_remap_offset(win);
|
|
|
|
if (remap == MVEBU_MBUS_NO_REMAP)
|
|
remap_addr = base;
|
|
else
|
|
remap_addr = remap;
|
|
writel(remap_addr & WIN_REMAP_LOW, addr_rmp + WIN_REMAP_LO_OFF);
|
|
writel(0, addr_rmp + WIN_REMAP_HI_OFF);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_mbus_alloc_window(struct mvebu_mbus_state *mbus,
|
|
phys_addr_t base, size_t size,
|
|
phys_addr_t remap, u8 target,
|
|
u8 attr)
|
|
{
|
|
int win;
|
|
|
|
if (remap == MVEBU_MBUS_NO_REMAP) {
|
|
for (win = 0; win < mbus->soc->num_wins; win++) {
|
|
if (mvebu_mbus_window_is_remappable(mbus, win))
|
|
continue;
|
|
|
|
if (mvebu_mbus_window_is_free(mbus, win))
|
|
return mvebu_mbus_setup_window(mbus, win, base,
|
|
size, remap,
|
|
target, attr);
|
|
}
|
|
}
|
|
|
|
for (win = 0; win < mbus->soc->num_wins; win++) {
|
|
/* Skip window if need remap but is not supported */
|
|
if ((remap != MVEBU_MBUS_NO_REMAP) &&
|
|
!mvebu_mbus_window_is_remappable(mbus, win))
|
|
continue;
|
|
|
|
if (mvebu_mbus_window_is_free(mbus, win))
|
|
return mvebu_mbus_setup_window(mbus, win, base, size,
|
|
remap, target, attr);
|
|
}
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* Debugfs debugging
|
|
*/
|
|
|
|
/* Common function used for Dove, Kirkwood, Armada 370/XP and Orion 5x */
|
|
static int mvebu_sdram_debug_show_orion(struct mvebu_mbus_state *mbus,
|
|
struct seq_file *seq, void *v)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
u32 basereg = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
|
|
u32 sizereg = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
|
|
u64 base;
|
|
u32 size;
|
|
|
|
if (!(sizereg & DDR_SIZE_ENABLED)) {
|
|
seq_printf(seq, "[%d] disabled\n", i);
|
|
continue;
|
|
}
|
|
|
|
base = ((u64)basereg & DDR_BASE_CS_HIGH_MASK) << 32;
|
|
base |= basereg & DDR_BASE_CS_LOW_MASK;
|
|
size = (sizereg | ~DDR_SIZE_MASK);
|
|
|
|
seq_printf(seq, "[%d] %016llx - %016llx : cs%d\n",
|
|
i, (unsigned long long)base,
|
|
(unsigned long long)base + size + 1,
|
|
(sizereg & DDR_SIZE_CS_MASK) >> DDR_SIZE_CS_SHIFT);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Special function for Dove */
|
|
static int mvebu_sdram_debug_show_dove(struct mvebu_mbus_state *mbus,
|
|
struct seq_file *seq, void *v)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
u32 map = readl(mbus->sdramwins_base + DOVE_DDR_BASE_CS_OFF(i));
|
|
u64 base;
|
|
u32 size;
|
|
|
|
if (!(map & 1)) {
|
|
seq_printf(seq, "[%d] disabled\n", i);
|
|
continue;
|
|
}
|
|
|
|
base = map & 0xff800000;
|
|
size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
|
|
|
|
seq_printf(seq, "[%d] %016llx - %016llx : cs%d\n",
|
|
i, (unsigned long long)base,
|
|
(unsigned long long)base + size, i);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_sdram_debug_show(struct seq_file *seq, void *v)
|
|
{
|
|
struct mvebu_mbus_state *mbus = &mbus_state;
|
|
return mbus->soc->show_cpu_target(mbus, seq, v);
|
|
}
|
|
|
|
static int mvebu_sdram_debug_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, mvebu_sdram_debug_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations mvebu_sdram_debug_fops = {
|
|
.open = mvebu_sdram_debug_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static int mvebu_devs_debug_show(struct seq_file *seq, void *v)
|
|
{
|
|
struct mvebu_mbus_state *mbus = &mbus_state;
|
|
int win;
|
|
|
|
for (win = 0; win < mbus->soc->num_wins; win++) {
|
|
u64 wbase, wremap;
|
|
u32 wsize;
|
|
u8 wtarget, wattr;
|
|
int enabled;
|
|
|
|
mvebu_mbus_read_window(mbus, win,
|
|
&enabled, &wbase, &wsize,
|
|
&wtarget, &wattr, &wremap);
|
|
|
|
if (!enabled) {
|
|
seq_printf(seq, "[%02d] disabled\n", win);
|
|
continue;
|
|
}
|
|
|
|
seq_printf(seq, "[%02d] %016llx - %016llx : %04x:%04x",
|
|
win, (unsigned long long)wbase,
|
|
(unsigned long long)(wbase + wsize), wtarget, wattr);
|
|
|
|
if (!is_power_of_2(wsize) ||
|
|
((wbase & (u64)(wsize - 1)) != 0))
|
|
seq_puts(seq, " (Invalid base/size!!)");
|
|
|
|
if (mvebu_mbus_window_is_remappable(mbus, win)) {
|
|
seq_printf(seq, " (remap %016llx)\n",
|
|
(unsigned long long)wremap);
|
|
} else
|
|
seq_printf(seq, "\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_devs_debug_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, mvebu_devs_debug_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations mvebu_devs_debug_fops = {
|
|
.open = mvebu_devs_debug_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
/*
|
|
* SoC-specific functions and definitions
|
|
*/
|
|
|
|
static unsigned int generic_mbus_win_cfg_offset(int win)
|
|
{
|
|
return win << 4;
|
|
}
|
|
|
|
static unsigned int armada_370_xp_mbus_win_cfg_offset(int win)
|
|
{
|
|
/* The register layout is a bit annoying and the below code
|
|
* tries to cope with it.
|
|
* - At offset 0x0, there are the registers for the first 8
|
|
* windows, with 4 registers of 32 bits per window (ctrl,
|
|
* base, remap low, remap high)
|
|
* - Then at offset 0x80, there is a hole of 0x10 bytes for
|
|
* the internal registers base address and internal units
|
|
* sync barrier register.
|
|
* - Then at offset 0x90, there the registers for 12
|
|
* windows, with only 2 registers of 32 bits per window
|
|
* (ctrl, base).
|
|
*/
|
|
if (win < 8)
|
|
return win << 4;
|
|
else
|
|
return 0x90 + ((win - 8) << 3);
|
|
}
|
|
|
|
static unsigned int mv78xx0_mbus_win_cfg_offset(int win)
|
|
{
|
|
if (win < 8)
|
|
return win << 4;
|
|
else
|
|
return 0x900 + ((win - 8) << 4);
|
|
}
|
|
|
|
static unsigned int generic_mbus_win_remap_2_offset(int win)
|
|
{
|
|
if (win < 2)
|
|
return generic_mbus_win_cfg_offset(win);
|
|
else
|
|
return MVEBU_MBUS_NO_REMAP;
|
|
}
|
|
|
|
static unsigned int generic_mbus_win_remap_4_offset(int win)
|
|
{
|
|
if (win < 4)
|
|
return generic_mbus_win_cfg_offset(win);
|
|
else
|
|
return MVEBU_MBUS_NO_REMAP;
|
|
}
|
|
|
|
static unsigned int generic_mbus_win_remap_8_offset(int win)
|
|
{
|
|
if (win < 8)
|
|
return generic_mbus_win_cfg_offset(win);
|
|
else
|
|
return MVEBU_MBUS_NO_REMAP;
|
|
}
|
|
|
|
static unsigned int armada_xp_mbus_win_remap_offset(int win)
|
|
{
|
|
if (win < 8)
|
|
return generic_mbus_win_cfg_offset(win);
|
|
else if (win == 13)
|
|
return 0xF0 - WIN_REMAP_LO_OFF;
|
|
else
|
|
return MVEBU_MBUS_NO_REMAP;
|
|
}
|
|
|
|
/*
|
|
* Use the memblock information to find the MBus bridge hole in the
|
|
* physical address space.
|
|
*/
|
|
static void __init
|
|
mvebu_mbus_find_bridge_hole(uint64_t *start, uint64_t *end)
|
|
{
|
|
struct memblock_region *r;
|
|
uint64_t s = 0;
|
|
|
|
for_each_memblock(memory, r) {
|
|
/*
|
|
* This part of the memory is above 4 GB, so we don't
|
|
* care for the MBus bridge hole.
|
|
*/
|
|
if (r->base >= 0x100000000)
|
|
continue;
|
|
|
|
/*
|
|
* The MBus bridge hole is at the end of the RAM under
|
|
* the 4 GB limit.
|
|
*/
|
|
if (r->base + r->size > s)
|
|
s = r->base + r->size;
|
|
}
|
|
|
|
*start = s;
|
|
*end = 0x100000000;
|
|
}
|
|
|
|
static void __init
|
|
mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
|
|
{
|
|
int i;
|
|
int cs;
|
|
uint64_t mbus_bridge_base, mbus_bridge_end;
|
|
|
|
mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
|
|
|
|
mvebu_mbus_find_bridge_hole(&mbus_bridge_base, &mbus_bridge_end);
|
|
|
|
for (i = 0, cs = 0; i < 4; i++) {
|
|
u64 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
|
|
u64 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
|
|
u64 end;
|
|
struct mbus_dram_window *w;
|
|
|
|
/* Ignore entries that are not enabled */
|
|
if (!(size & DDR_SIZE_ENABLED))
|
|
continue;
|
|
|
|
/*
|
|
* Ignore entries whose base address is above 2^32,
|
|
* since devices cannot DMA to such high addresses
|
|
*/
|
|
if (base & DDR_BASE_CS_HIGH_MASK)
|
|
continue;
|
|
|
|
base = base & DDR_BASE_CS_LOW_MASK;
|
|
size = (size | ~DDR_SIZE_MASK) + 1;
|
|
end = base + size;
|
|
|
|
/*
|
|
* Adjust base/size of the current CS to make sure it
|
|
* doesn't overlap with the MBus bridge hole. This is
|
|
* particularly important for devices that do DMA from
|
|
* DRAM to a SRAM mapped in a MBus window, such as the
|
|
* CESA cryptographic engine.
|
|
*/
|
|
|
|
/*
|
|
* The CS is fully enclosed inside the MBus bridge
|
|
* area, so ignore it.
|
|
*/
|
|
if (base >= mbus_bridge_base && end <= mbus_bridge_end)
|
|
continue;
|
|
|
|
/*
|
|
* Beginning of CS overlaps with end of MBus, raise CS
|
|
* base address, and shrink its size.
|
|
*/
|
|
if (base >= mbus_bridge_base && end > mbus_bridge_end) {
|
|
size -= mbus_bridge_end - base;
|
|
base = mbus_bridge_end;
|
|
}
|
|
|
|
/*
|
|
* End of CS overlaps with beginning of MBus, shrink
|
|
* CS size.
|
|
*/
|
|
if (base < mbus_bridge_base && end > mbus_bridge_base)
|
|
size -= end - mbus_bridge_base;
|
|
|
|
w = &mvebu_mbus_dram_info.cs[cs++];
|
|
w->cs_index = i;
|
|
w->mbus_attr = 0xf & ~(1 << i);
|
|
if (mbus->hw_io_coherency)
|
|
w->mbus_attr |= ATTR_HW_COHERENCY;
|
|
w->base = base;
|
|
w->size = size;
|
|
}
|
|
mvebu_mbus_dram_info.num_cs = cs;
|
|
}
|
|
|
|
static int
|
|
mvebu_mbus_default_save_cpu_target(struct mvebu_mbus_state *mbus,
|
|
u32 *store_addr)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
|
|
u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
|
|
|
|
writel(mbus->sdramwins_phys_base + DDR_BASE_CS_OFF(i),
|
|
store_addr++);
|
|
writel(base, store_addr++);
|
|
writel(mbus->sdramwins_phys_base + DDR_SIZE_CS_OFF(i),
|
|
store_addr++);
|
|
writel(size, store_addr++);
|
|
}
|
|
|
|
/* We've written 16 words to the store address */
|
|
return 16;
|
|
}
|
|
|
|
static void __init
|
|
mvebu_mbus_dove_setup_cpu_target(struct mvebu_mbus_state *mbus)
|
|
{
|
|
int i;
|
|
int cs;
|
|
|
|
mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
|
|
|
|
for (i = 0, cs = 0; i < 2; i++) {
|
|
u32 map = readl(mbus->sdramwins_base + DOVE_DDR_BASE_CS_OFF(i));
|
|
|
|
/*
|
|
* Chip select enabled?
|
|
*/
|
|
if (map & 1) {
|
|
struct mbus_dram_window *w;
|
|
|
|
w = &mvebu_mbus_dram_info.cs[cs++];
|
|
w->cs_index = i;
|
|
w->mbus_attr = 0; /* CS address decoding done inside */
|
|
/* the DDR controller, no need to */
|
|
/* provide attributes */
|
|
w->base = map & 0xff800000;
|
|
w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
|
|
}
|
|
}
|
|
|
|
mvebu_mbus_dram_info.num_cs = cs;
|
|
}
|
|
|
|
static int
|
|
mvebu_mbus_dove_save_cpu_target(struct mvebu_mbus_state *mbus,
|
|
u32 *store_addr)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
u32 map = readl(mbus->sdramwins_base + DOVE_DDR_BASE_CS_OFF(i));
|
|
|
|
writel(mbus->sdramwins_phys_base + DOVE_DDR_BASE_CS_OFF(i),
|
|
store_addr++);
|
|
writel(map, store_addr++);
|
|
}
|
|
|
|
/* We've written 4 words to the store address */
|
|
return 4;
|
|
}
|
|
|
|
int mvebu_mbus_save_cpu_target(u32 *store_addr)
|
|
{
|
|
return mbus_state.soc->save_cpu_target(&mbus_state, store_addr);
|
|
}
|
|
|
|
static const struct mvebu_mbus_soc_data armada_370_mbus_data = {
|
|
.num_wins = 20,
|
|
.has_mbus_bridge = true,
|
|
.win_cfg_offset = armada_370_xp_mbus_win_cfg_offset,
|
|
.win_remap_offset = generic_mbus_win_remap_8_offset,
|
|
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
|
|
.show_cpu_target = mvebu_sdram_debug_show_orion,
|
|
.save_cpu_target = mvebu_mbus_default_save_cpu_target,
|
|
};
|
|
|
|
static const struct mvebu_mbus_soc_data armada_xp_mbus_data = {
|
|
.num_wins = 20,
|
|
.has_mbus_bridge = true,
|
|
.win_cfg_offset = armada_370_xp_mbus_win_cfg_offset,
|
|
.win_remap_offset = armada_xp_mbus_win_remap_offset,
|
|
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
|
|
.show_cpu_target = mvebu_sdram_debug_show_orion,
|
|
.save_cpu_target = mvebu_mbus_default_save_cpu_target,
|
|
};
|
|
|
|
static const struct mvebu_mbus_soc_data kirkwood_mbus_data = {
|
|
.num_wins = 8,
|
|
.win_cfg_offset = generic_mbus_win_cfg_offset,
|
|
.save_cpu_target = mvebu_mbus_default_save_cpu_target,
|
|
.win_remap_offset = generic_mbus_win_remap_4_offset,
|
|
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
|
|
.show_cpu_target = mvebu_sdram_debug_show_orion,
|
|
};
|
|
|
|
static const struct mvebu_mbus_soc_data dove_mbus_data = {
|
|
.num_wins = 8,
|
|
.win_cfg_offset = generic_mbus_win_cfg_offset,
|
|
.save_cpu_target = mvebu_mbus_dove_save_cpu_target,
|
|
.win_remap_offset = generic_mbus_win_remap_4_offset,
|
|
.setup_cpu_target = mvebu_mbus_dove_setup_cpu_target,
|
|
.show_cpu_target = mvebu_sdram_debug_show_dove,
|
|
};
|
|
|
|
/*
|
|
* Some variants of Orion5x have 4 remappable windows, some other have
|
|
* only two of them.
|
|
*/
|
|
static const struct mvebu_mbus_soc_data orion5x_4win_mbus_data = {
|
|
.num_wins = 8,
|
|
.win_cfg_offset = generic_mbus_win_cfg_offset,
|
|
.save_cpu_target = mvebu_mbus_default_save_cpu_target,
|
|
.win_remap_offset = generic_mbus_win_remap_4_offset,
|
|
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
|
|
.show_cpu_target = mvebu_sdram_debug_show_orion,
|
|
};
|
|
|
|
static const struct mvebu_mbus_soc_data orion5x_2win_mbus_data = {
|
|
.num_wins = 8,
|
|
.win_cfg_offset = generic_mbus_win_cfg_offset,
|
|
.save_cpu_target = mvebu_mbus_default_save_cpu_target,
|
|
.win_remap_offset = generic_mbus_win_remap_2_offset,
|
|
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
|
|
.show_cpu_target = mvebu_sdram_debug_show_orion,
|
|
};
|
|
|
|
static const struct mvebu_mbus_soc_data mv78xx0_mbus_data = {
|
|
.num_wins = 14,
|
|
.win_cfg_offset = mv78xx0_mbus_win_cfg_offset,
|
|
.save_cpu_target = mvebu_mbus_default_save_cpu_target,
|
|
.win_remap_offset = generic_mbus_win_remap_8_offset,
|
|
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
|
|
.show_cpu_target = mvebu_sdram_debug_show_orion,
|
|
};
|
|
|
|
static const struct of_device_id of_mvebu_mbus_ids[] = {
|
|
{ .compatible = "marvell,armada370-mbus",
|
|
.data = &armada_370_mbus_data, },
|
|
{ .compatible = "marvell,armada375-mbus",
|
|
.data = &armada_xp_mbus_data, },
|
|
{ .compatible = "marvell,armada380-mbus",
|
|
.data = &armada_xp_mbus_data, },
|
|
{ .compatible = "marvell,armadaxp-mbus",
|
|
.data = &armada_xp_mbus_data, },
|
|
{ .compatible = "marvell,kirkwood-mbus",
|
|
.data = &kirkwood_mbus_data, },
|
|
{ .compatible = "marvell,dove-mbus",
|
|
.data = &dove_mbus_data, },
|
|
{ .compatible = "marvell,orion5x-88f5281-mbus",
|
|
.data = &orion5x_4win_mbus_data, },
|
|
{ .compatible = "marvell,orion5x-88f5182-mbus",
|
|
.data = &orion5x_2win_mbus_data, },
|
|
{ .compatible = "marvell,orion5x-88f5181-mbus",
|
|
.data = &orion5x_2win_mbus_data, },
|
|
{ .compatible = "marvell,orion5x-88f6183-mbus",
|
|
.data = &orion5x_4win_mbus_data, },
|
|
{ .compatible = "marvell,mv78xx0-mbus",
|
|
.data = &mv78xx0_mbus_data, },
|
|
{ },
|
|
};
|
|
|
|
/*
|
|
* Public API of the driver
|
|
*/
|
|
int mvebu_mbus_add_window_remap_by_id(unsigned int target,
|
|
unsigned int attribute,
|
|
phys_addr_t base, size_t size,
|
|
phys_addr_t remap)
|
|
{
|
|
struct mvebu_mbus_state *s = &mbus_state;
|
|
|
|
if (!mvebu_mbus_window_conflicts(s, base, size, target, attribute)) {
|
|
pr_err("cannot add window '%x:%x', conflicts with another window\n",
|
|
target, attribute);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute);
|
|
}
|
|
|
|
int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute,
|
|
phys_addr_t base, size_t size)
|
|
{
|
|
return mvebu_mbus_add_window_remap_by_id(target, attribute, base,
|
|
size, MVEBU_MBUS_NO_REMAP);
|
|
}
|
|
|
|
int mvebu_mbus_del_window(phys_addr_t base, size_t size)
|
|
{
|
|
int win;
|
|
|
|
win = mvebu_mbus_find_window(&mbus_state, base, size);
|
|
if (win < 0)
|
|
return win;
|
|
|
|
mvebu_mbus_disable_window(&mbus_state, win);
|
|
return 0;
|
|
}
|
|
|
|
void mvebu_mbus_get_pcie_mem_aperture(struct resource *res)
|
|
{
|
|
if (!res)
|
|
return;
|
|
*res = mbus_state.pcie_mem_aperture;
|
|
}
|
|
|
|
void mvebu_mbus_get_pcie_io_aperture(struct resource *res)
|
|
{
|
|
if (!res)
|
|
return;
|
|
*res = mbus_state.pcie_io_aperture;
|
|
}
|
|
|
|
static __init int mvebu_mbus_debugfs_init(void)
|
|
{
|
|
struct mvebu_mbus_state *s = &mbus_state;
|
|
|
|
/*
|
|
* If no base has been initialized, doesn't make sense to
|
|
* register the debugfs entries. We may be on a multiplatform
|
|
* kernel that isn't running a Marvell EBU SoC.
|
|
*/
|
|
if (!s->mbuswins_base)
|
|
return 0;
|
|
|
|
s->debugfs_root = debugfs_create_dir("mvebu-mbus", NULL);
|
|
if (s->debugfs_root) {
|
|
s->debugfs_sdram = debugfs_create_file("sdram", S_IRUGO,
|
|
s->debugfs_root, NULL,
|
|
&mvebu_sdram_debug_fops);
|
|
s->debugfs_devs = debugfs_create_file("devices", S_IRUGO,
|
|
s->debugfs_root, NULL,
|
|
&mvebu_devs_debug_fops);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
fs_initcall(mvebu_mbus_debugfs_init);
|
|
|
|
static int mvebu_mbus_suspend(void)
|
|
{
|
|
struct mvebu_mbus_state *s = &mbus_state;
|
|
int win;
|
|
|
|
if (!s->mbusbridge_base)
|
|
return -ENODEV;
|
|
|
|
for (win = 0; win < s->soc->num_wins; win++) {
|
|
void __iomem *addr = s->mbuswins_base +
|
|
s->soc->win_cfg_offset(win);
|
|
void __iomem *addr_rmp;
|
|
|
|
s->wins[win].base = readl(addr + WIN_BASE_OFF);
|
|
s->wins[win].ctrl = readl(addr + WIN_CTRL_OFF);
|
|
|
|
if (!mvebu_mbus_window_is_remappable(s, win))
|
|
continue;
|
|
|
|
addr_rmp = s->mbuswins_base +
|
|
s->soc->win_remap_offset(win);
|
|
|
|
s->wins[win].remap_lo = readl(addr_rmp + WIN_REMAP_LO_OFF);
|
|
s->wins[win].remap_hi = readl(addr_rmp + WIN_REMAP_HI_OFF);
|
|
}
|
|
|
|
s->mbus_bridge_ctrl = readl(s->mbusbridge_base +
|
|
MBUS_BRIDGE_CTRL_OFF);
|
|
s->mbus_bridge_base = readl(s->mbusbridge_base +
|
|
MBUS_BRIDGE_BASE_OFF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mvebu_mbus_resume(void)
|
|
{
|
|
struct mvebu_mbus_state *s = &mbus_state;
|
|
int win;
|
|
|
|
writel(s->mbus_bridge_ctrl,
|
|
s->mbusbridge_base + MBUS_BRIDGE_CTRL_OFF);
|
|
writel(s->mbus_bridge_base,
|
|
s->mbusbridge_base + MBUS_BRIDGE_BASE_OFF);
|
|
|
|
for (win = 0; win < s->soc->num_wins; win++) {
|
|
void __iomem *addr = s->mbuswins_base +
|
|
s->soc->win_cfg_offset(win);
|
|
void __iomem *addr_rmp;
|
|
|
|
writel(s->wins[win].base, addr + WIN_BASE_OFF);
|
|
writel(s->wins[win].ctrl, addr + WIN_CTRL_OFF);
|
|
|
|
if (!mvebu_mbus_window_is_remappable(s, win))
|
|
continue;
|
|
|
|
addr_rmp = s->mbuswins_base +
|
|
s->soc->win_remap_offset(win);
|
|
|
|
writel(s->wins[win].remap_lo, addr_rmp + WIN_REMAP_LO_OFF);
|
|
writel(s->wins[win].remap_hi, addr_rmp + WIN_REMAP_HI_OFF);
|
|
}
|
|
}
|
|
|
|
struct syscore_ops mvebu_mbus_syscore_ops = {
|
|
.suspend = mvebu_mbus_suspend,
|
|
.resume = mvebu_mbus_resume,
|
|
};
|
|
|
|
static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus,
|
|
phys_addr_t mbuswins_phys_base,
|
|
size_t mbuswins_size,
|
|
phys_addr_t sdramwins_phys_base,
|
|
size_t sdramwins_size,
|
|
phys_addr_t mbusbridge_phys_base,
|
|
size_t mbusbridge_size,
|
|
bool is_coherent)
|
|
{
|
|
int win;
|
|
|
|
mbus->mbuswins_base = ioremap(mbuswins_phys_base, mbuswins_size);
|
|
if (!mbus->mbuswins_base)
|
|
return -ENOMEM;
|
|
|
|
mbus->sdramwins_base = ioremap(sdramwins_phys_base, sdramwins_size);
|
|
if (!mbus->sdramwins_base) {
|
|
iounmap(mbus_state.mbuswins_base);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
mbus->sdramwins_phys_base = sdramwins_phys_base;
|
|
|
|
if (mbusbridge_phys_base) {
|
|
mbus->mbusbridge_base = ioremap(mbusbridge_phys_base,
|
|
mbusbridge_size);
|
|
if (!mbus->mbusbridge_base) {
|
|
iounmap(mbus->sdramwins_base);
|
|
iounmap(mbus->mbuswins_base);
|
|
return -ENOMEM;
|
|
}
|
|
} else
|
|
mbus->mbusbridge_base = NULL;
|
|
|
|
for (win = 0; win < mbus->soc->num_wins; win++)
|
|
mvebu_mbus_disable_window(mbus, win);
|
|
|
|
mbus->soc->setup_cpu_target(mbus);
|
|
|
|
if (is_coherent)
|
|
writel(UNIT_SYNC_BARRIER_ALL,
|
|
mbus->mbuswins_base + UNIT_SYNC_BARRIER_OFF);
|
|
|
|
register_syscore_ops(&mvebu_mbus_syscore_ops);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int __init mvebu_mbus_init(const char *soc, phys_addr_t mbuswins_phys_base,
|
|
size_t mbuswins_size,
|
|
phys_addr_t sdramwins_phys_base,
|
|
size_t sdramwins_size)
|
|
{
|
|
const struct of_device_id *of_id;
|
|
|
|
for (of_id = of_mvebu_mbus_ids; of_id->compatible[0]; of_id++)
|
|
if (!strcmp(of_id->compatible, soc))
|
|
break;
|
|
|
|
if (!of_id->compatible[0]) {
|
|
pr_err("could not find a matching SoC family\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
mbus_state.soc = of_id->data;
|
|
|
|
return mvebu_mbus_common_init(&mbus_state,
|
|
mbuswins_phys_base,
|
|
mbuswins_size,
|
|
sdramwins_phys_base,
|
|
sdramwins_size, 0, 0, false);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
/*
|
|
* The window IDs in the ranges DT property have the following format:
|
|
* - bits 28 to 31: MBus custom field
|
|
* - bits 24 to 27: window target ID
|
|
* - bits 16 to 23: window attribute ID
|
|
* - bits 0 to 15: unused
|
|
*/
|
|
#define CUSTOM(id) (((id) & 0xF0000000) >> 24)
|
|
#define TARGET(id) (((id) & 0x0F000000) >> 24)
|
|
#define ATTR(id) (((id) & 0x00FF0000) >> 16)
|
|
|
|
static int __init mbus_dt_setup_win(struct mvebu_mbus_state *mbus,
|
|
u32 base, u32 size,
|
|
u8 target, u8 attr)
|
|
{
|
|
if (!mvebu_mbus_window_conflicts(mbus, base, size, target, attr)) {
|
|
pr_err("cannot add window '%04x:%04x', conflicts with another window\n",
|
|
target, attr);
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (mvebu_mbus_alloc_window(mbus, base, size, MVEBU_MBUS_NO_REMAP,
|
|
target, attr)) {
|
|
pr_err("cannot add window '%04x:%04x', too many windows\n",
|
|
target, attr);
|
|
return -ENOMEM;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int __init
|
|
mbus_parse_ranges(struct device_node *node,
|
|
int *addr_cells, int *c_addr_cells, int *c_size_cells,
|
|
int *cell_count, const __be32 **ranges_start,
|
|
const __be32 **ranges_end)
|
|
{
|
|
const __be32 *prop;
|
|
int ranges_len, tuple_len;
|
|
|
|
/* Allow a node with no 'ranges' property */
|
|
*ranges_start = of_get_property(node, "ranges", &ranges_len);
|
|
if (*ranges_start == NULL) {
|
|
*addr_cells = *c_addr_cells = *c_size_cells = *cell_count = 0;
|
|
*ranges_start = *ranges_end = NULL;
|
|
return 0;
|
|
}
|
|
*ranges_end = *ranges_start + ranges_len / sizeof(__be32);
|
|
|
|
*addr_cells = of_n_addr_cells(node);
|
|
|
|
prop = of_get_property(node, "#address-cells", NULL);
|
|
*c_addr_cells = be32_to_cpup(prop);
|
|
|
|
prop = of_get_property(node, "#size-cells", NULL);
|
|
*c_size_cells = be32_to_cpup(prop);
|
|
|
|
*cell_count = *addr_cells + *c_addr_cells + *c_size_cells;
|
|
tuple_len = (*cell_count) * sizeof(__be32);
|
|
|
|
if (ranges_len % tuple_len) {
|
|
pr_warn("malformed ranges entry '%s'\n", node->name);
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int __init mbus_dt_setup(struct mvebu_mbus_state *mbus,
|
|
struct device_node *np)
|
|
{
|
|
int addr_cells, c_addr_cells, c_size_cells;
|
|
int i, ret, cell_count;
|
|
const __be32 *r, *ranges_start, *ranges_end;
|
|
|
|
ret = mbus_parse_ranges(np, &addr_cells, &c_addr_cells,
|
|
&c_size_cells, &cell_count,
|
|
&ranges_start, &ranges_end);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
for (i = 0, r = ranges_start; r < ranges_end; r += cell_count, i++) {
|
|
u32 windowid, base, size;
|
|
u8 target, attr;
|
|
|
|
/*
|
|
* An entry with a non-zero custom field do not
|
|
* correspond to a static window, so skip it.
|
|
*/
|
|
windowid = of_read_number(r, 1);
|
|
if (CUSTOM(windowid))
|
|
continue;
|
|
|
|
target = TARGET(windowid);
|
|
attr = ATTR(windowid);
|
|
|
|
base = of_read_number(r + c_addr_cells, addr_cells);
|
|
size = of_read_number(r + c_addr_cells + addr_cells,
|
|
c_size_cells);
|
|
ret = mbus_dt_setup_win(mbus, base, size, target, attr);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void __init mvebu_mbus_get_pcie_resources(struct device_node *np,
|
|
struct resource *mem,
|
|
struct resource *io)
|
|
{
|
|
u32 reg[2];
|
|
int ret;
|
|
|
|
/*
|
|
* These are optional, so we make sure that resource_size(x) will
|
|
* return 0.
|
|
*/
|
|
memset(mem, 0, sizeof(struct resource));
|
|
mem->end = -1;
|
|
memset(io, 0, sizeof(struct resource));
|
|
io->end = -1;
|
|
|
|
ret = of_property_read_u32_array(np, "pcie-mem-aperture", reg, ARRAY_SIZE(reg));
|
|
if (!ret) {
|
|
mem->start = reg[0];
|
|
mem->end = mem->start + reg[1] - 1;
|
|
mem->flags = IORESOURCE_MEM;
|
|
}
|
|
|
|
ret = of_property_read_u32_array(np, "pcie-io-aperture", reg, ARRAY_SIZE(reg));
|
|
if (!ret) {
|
|
io->start = reg[0];
|
|
io->end = io->start + reg[1] - 1;
|
|
io->flags = IORESOURCE_IO;
|
|
}
|
|
}
|
|
|
|
int __init mvebu_mbus_dt_init(bool is_coherent)
|
|
{
|
|
struct resource mbuswins_res, sdramwins_res, mbusbridge_res;
|
|
struct device_node *np, *controller;
|
|
const struct of_device_id *of_id;
|
|
const __be32 *prop;
|
|
int ret;
|
|
|
|
np = of_find_matching_node_and_match(NULL, of_mvebu_mbus_ids, &of_id);
|
|
if (!np) {
|
|
pr_err("could not find a matching SoC family\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
mbus_state.soc = of_id->data;
|
|
|
|
prop = of_get_property(np, "controller", NULL);
|
|
if (!prop) {
|
|
pr_err("required 'controller' property missing\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
controller = of_find_node_by_phandle(be32_to_cpup(prop));
|
|
if (!controller) {
|
|
pr_err("could not find an 'mbus-controller' node\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (of_address_to_resource(controller, 0, &mbuswins_res)) {
|
|
pr_err("cannot get MBUS register address\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (of_address_to_resource(controller, 1, &sdramwins_res)) {
|
|
pr_err("cannot get SDRAM register address\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Set the resource to 0 so that it can be left unmapped by
|
|
* mvebu_mbus_common_init() if the DT doesn't carry the
|
|
* necessary information. This is needed to preserve backward
|
|
* compatibility.
|
|
*/
|
|
memset(&mbusbridge_res, 0, sizeof(mbusbridge_res));
|
|
|
|
if (mbus_state.soc->has_mbus_bridge) {
|
|
if (of_address_to_resource(controller, 2, &mbusbridge_res))
|
|
pr_warn(FW_WARN "deprecated mbus-mvebu Device Tree, suspend/resume will not work\n");
|
|
}
|
|
|
|
mbus_state.hw_io_coherency = is_coherent;
|
|
|
|
/* Get optional pcie-{mem,io}-aperture properties */
|
|
mvebu_mbus_get_pcie_resources(np, &mbus_state.pcie_mem_aperture,
|
|
&mbus_state.pcie_io_aperture);
|
|
|
|
ret = mvebu_mbus_common_init(&mbus_state,
|
|
mbuswins_res.start,
|
|
resource_size(&mbuswins_res),
|
|
sdramwins_res.start,
|
|
resource_size(&sdramwins_res),
|
|
mbusbridge_res.start,
|
|
resource_size(&mbusbridge_res),
|
|
is_coherent);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Setup statically declared windows in the DT */
|
|
return mbus_dt_setup(&mbus_state, np);
|
|
}
|
|
#endif
|