linux_dsm_epyc7002/drivers/gpu/drm/sun4i
Chen-Yu Tsai 6664e9dc53
drm/sun4i: Add support for A80 TCONs
The Allwinner A80 SoC has 2 documented TCONs. The display pipeline
diagram from the user manual shows a third TCON, but it's missing
an interrupt line, and its registers are not explained either.
It's also not used in Allwinner's vendor BSP.

The first TCON only has channel 0, for LCD panel output. The TCON
hardware setup is peculiar in that the eDP reset must also be
deasserted to allow access to the TCON. How the eDP module is wired
in the SoC itself is never explained.

The second TCON only has channel 1, and its output is connected to
the HDMI encoder block.

This patch adds a "needs_edp_reset" field to the tcon quirks structure,
and adds quirks and compatible strings for the 2 documented TCONs.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180315114136.24747-4-wens@csie.org
2018-03-19 15:37:21 +01:00
..
Kconfig drm/sun4i: Allow building on arm64 2018-03-02 08:46:14 +01:00
Makefile drm/sun4i: Add support for H3 HDMI PHY variant 2018-03-02 08:45:49 +01:00
sun4i_backend.c drm/sun4i: backend: Remove ARGB spoofing 2018-02-22 16:20:59 +01:00
sun4i_backend.h drm/sun4i: backend: Check for the number of alpha planes 2018-01-29 14:02:42 +01:00
sun4i_crtc.c drm/sun4i: backend: Wire in the frontend 2018-01-22 15:17:04 +01:00
sun4i_crtc.h drm/sun4i: abstract a engine type 2017-06-01 09:47:23 +02:00
sun4i_dotclock.c drm/sun4i: Create minimal multipliers and dividers 2018-01-04 20:08:42 +01:00
sun4i_dotclock.h
sun4i_drv.c drm/sun4i: Add support for H3 display engine 2018-03-02 08:45:05 +01:00
sun4i_drv.h drm/sun4i: Add a driver for the display frontend 2018-01-22 15:15:38 +01:00
sun4i_framebuffer.c drm/sun4i: backend: Add support for zpos 2018-01-29 14:02:40 +01:00
sun4i_framebuffer.h drm/sun4i: Use drm_fb_cma_fbdev_init/fini() 2017-12-08 14:47:42 +01:00
sun4i_frontend.c drm/sun4i: Add a driver for the display frontend 2018-01-22 15:15:38 +01:00
sun4i_frontend.h drm/sun4i: Add a driver for the display frontend 2018-01-22 15:15:38 +01:00
sun4i_hdmi_ddc_clk.c drm/sun4i: tcon: Don't rely on encoders to set the TCON mode 2017-10-17 19:49:13 +02:00
sun4i_hdmi_enc.c drm/sun4i: hdmi: Move the mode_valid callback to the encoder 2017-12-20 12:59:46 +01:00
sun4i_hdmi_i2c.c drm/sun4i: hdmi: Add support for controller hardware variants 2017-10-11 09:53:33 +02:00
sun4i_hdmi_tmds_clk.c drm/sun4i: hdmi: Add missing rate halving check in sun4i_tmds_determine_rate 2018-01-11 13:25:43 +01:00
sun4i_hdmi.h drm/sun4i: hdmi: Document PAD_CTRL1 output invert bits 2017-10-16 09:54:21 +02:00
sun4i_layer.c drm/sun4i: backend: Make zpos configurable 2018-02-22 16:20:16 +01:00
sun4i_layer.h drm/sun4i: backend: Assign the pipes automatically 2018-02-22 16:19:52 +01:00
sun4i_lvds.c drm/sun4i: add lvds mode_valid function 2018-03-14 09:14:57 +01:00
sun4i_lvds.h drm/sun4i: Add LVDS support 2018-01-04 20:37:17 +01:00
sun4i_rgb.c drm/sun4i: move rgb mode_valid from connector to encoder 2018-03-14 09:07:13 +01:00
sun4i_rgb.h drm/sun4i: rgb: Pass tcon pointer when initializing RGB encoder 2017-03-07 22:18:24 +01:00
sun4i_tcon.c drm/sun4i: Add support for A80 TCONs 2018-03-19 15:37:21 +01:00
sun4i_tcon.h drm/sun4i: Add support for A80 TCONs 2018-03-19 15:37:21 +01:00
sun4i_tv.c drm/sun4i: tcon: Don't rely on encoders to set the TCON mode 2017-10-17 19:49:13 +02:00
sun6i_drc.c Merge tag 'drm-misc-next-2016-11-16' of git://anongit.freedesktop.org/git/drm-misc into drm-next 2016-11-17 08:02:46 +10:00
sun8i_csc.c drm/sun4i: Add DE2 CSC library 2017-12-05 13:22:44 +01:00
sun8i_csc.h drm/sun4i: Add DE2 CSC library 2017-12-05 13:22:44 +01:00
sun8i_dw_hdmi.c drm/sun4i: Implement A83T HDMI driver 2018-02-16 09:38:30 +01:00
sun8i_dw_hdmi.h drm/sun4i: Add support for H3 HDMI PHY variant 2018-03-02 08:45:49 +01:00
sun8i_hdmi_phy_clk.c drm/sun4i: Add support for H3 HDMI PHY variant 2018-03-02 08:45:49 +01:00
sun8i_hdmi_phy.c drm/sun4i: Add support for H3 HDMI PHY variant 2018-03-02 08:45:49 +01:00
sun8i_mixer.c drm/sun4i: Add support for H3 mixer 0 2018-03-02 08:45:14 +01:00
sun8i_mixer.h drm/sun4i: Force the mixer rate at 150MHz 2018-01-04 20:04:32 +01:00
sun8i_ui_layer.c drm: Don't pass clip to drm_atomic_helper_check_plane_state() 2018-03-05 20:48:25 +02:00
sun8i_ui_layer.h drm/sun4i: Reorganize UI layer code in DE2 2017-12-05 13:22:43 +01:00
sun8i_ui_scaler.c drm/sun4i: Add support for HW scaling to DE2 2017-12-05 13:22:44 +01:00
sun8i_ui_scaler.h drm/sun4i: Add support for HW scaling to DE2 2017-12-05 13:22:44 +01:00
sun8i_vi_layer.c drm: Don't pass clip to drm_atomic_helper_check_plane_state() 2018-03-05 20:48:25 +02:00
sun8i_vi_layer.h drm/sun4i: Add support for DE2 VI planes 2017-12-05 13:22:43 +01:00
sun8i_vi_scaler.c drm/sun4i: Expand DE2 scaler lib with YUV support 2017-12-05 13:22:44 +01:00
sun8i_vi_scaler.h drm/sun4i: Expand DE2 scaler lib with YUV support 2017-12-05 13:22:44 +01:00
sunxi_engine.h drm/sun4i: Fix build warnings in sunxi_engine.h 2018-01-23 10:45:01 +01:00