mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 06:30:54 +07:00
f713c6bf32
The PLL loop filter/gain can be located in a separate register on some SoCs. Split these off into a separate variable, so that an offset can be added if necessary. Also, make the necessary modifications to the Cygnus and NSP drivers for this change. Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
271 lines
8.5 KiB
C
271 lines
8.5 KiB
C
/*
|
|
* Copyright (C) 2014 Broadcom Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <dt-bindings/clock/bcm-cygnus.h>
|
|
#include "clk-iproc.h"
|
|
|
|
#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
|
|
|
|
#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
|
|
.pwr_shift = ps, .iso_shift = is }
|
|
|
|
#define SW_CTRL_VAL(o, s) { .offset = o, .shift = s, }
|
|
|
|
#define ASIU_DIV_VAL(o, es, hs, hw, ls, lw) \
|
|
{ .offset = o, .en_shift = es, .high_shift = hs, \
|
|
.high_width = hw, .low_shift = ls, .low_width = lw }
|
|
|
|
#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
|
|
.p_reset_shift = prs }
|
|
|
|
#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
|
|
.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
|
|
.ka_width = kaw }
|
|
|
|
#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
|
|
|
|
#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
|
|
.hold_shift = hs, .bypass_shift = bs }
|
|
|
|
#define ASIU_GATE_VAL(o, es) { .offset = o, .en_shift = es }
|
|
|
|
static void __init cygnus_armpll_init(struct device_node *node)
|
|
{
|
|
iproc_armpll_setup(node);
|
|
}
|
|
CLK_OF_DECLARE(cygnus_armpll, "brcm,cygnus-armpll", cygnus_armpll_init);
|
|
|
|
static const struct iproc_pll_ctrl genpll = {
|
|
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
|
|
IPROC_CLK_PLL_NEEDS_SW_CFG,
|
|
.aon = AON_VAL(0x0, 2, 1, 0),
|
|
.reset = RESET_VAL(0x0, 11, 10),
|
|
.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
|
|
.sw_ctrl = SW_CTRL_VAL(0x10, 31),
|
|
.ndiv_int = REG_VAL(0x10, 20, 10),
|
|
.ndiv_frac = REG_VAL(0x10, 0, 20),
|
|
.pdiv = REG_VAL(0x14, 0, 4),
|
|
.vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
|
|
.status = REG_VAL(0x28, 12, 1),
|
|
};
|
|
|
|
static const struct iproc_clk_ctrl genpll_clk[] = {
|
|
[BCM_CYGNUS_GENPLL_AXI21_CLK] = {
|
|
.channel = BCM_CYGNUS_GENPLL_AXI21_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x4, 6, 0, 12),
|
|
.mdiv = REG_VAL(0x20, 0, 8),
|
|
},
|
|
[BCM_CYGNUS_GENPLL_250MHZ_CLK] = {
|
|
.channel = BCM_CYGNUS_GENPLL_250MHZ_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x4, 7, 1, 13),
|
|
.mdiv = REG_VAL(0x20, 10, 8),
|
|
},
|
|
[BCM_CYGNUS_GENPLL_IHOST_SYS_CLK] = {
|
|
.channel = BCM_CYGNUS_GENPLL_IHOST_SYS_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x4, 8, 2, 14),
|
|
.mdiv = REG_VAL(0x20, 20, 8),
|
|
},
|
|
[BCM_CYGNUS_GENPLL_ENET_SW_CLK] = {
|
|
.channel = BCM_CYGNUS_GENPLL_ENET_SW_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x4, 9, 3, 15),
|
|
.mdiv = REG_VAL(0x24, 0, 8),
|
|
},
|
|
[BCM_CYGNUS_GENPLL_AUDIO_125_CLK] = {
|
|
.channel = BCM_CYGNUS_GENPLL_AUDIO_125_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x4, 10, 4, 16),
|
|
.mdiv = REG_VAL(0x24, 10, 8),
|
|
},
|
|
[BCM_CYGNUS_GENPLL_CAN_CLK] = {
|
|
.channel = BCM_CYGNUS_GENPLL_CAN_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x4, 11, 5, 17),
|
|
.mdiv = REG_VAL(0x24, 20, 8),
|
|
},
|
|
};
|
|
|
|
static void __init cygnus_genpll_clk_init(struct device_node *node)
|
|
{
|
|
iproc_pll_clk_setup(node, &genpll, NULL, 0, genpll_clk,
|
|
ARRAY_SIZE(genpll_clk));
|
|
}
|
|
CLK_OF_DECLARE(cygnus_genpll, "brcm,cygnus-genpll", cygnus_genpll_clk_init);
|
|
|
|
static const struct iproc_pll_ctrl lcpll0 = {
|
|
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
|
|
.aon = AON_VAL(0x0, 2, 5, 4),
|
|
.reset = RESET_VAL(0x0, 31, 30),
|
|
.dig_filter = DF_VAL(0x0, 27, 3, 23, 4, 19, 4),
|
|
.sw_ctrl = SW_CTRL_VAL(0x4, 31),
|
|
.ndiv_int = REG_VAL(0x4, 16, 10),
|
|
.pdiv = REG_VAL(0x4, 26, 4),
|
|
.vco_ctrl = VCO_CTRL_VAL(0x10, 0x14),
|
|
.status = REG_VAL(0x18, 12, 1),
|
|
};
|
|
|
|
static const struct iproc_clk_ctrl lcpll0_clk[] = {
|
|
[BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK] = {
|
|
.channel = BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x0, 7, 1, 13),
|
|
.mdiv = REG_VAL(0x8, 0, 8),
|
|
},
|
|
[BCM_CYGNUS_LCPLL0_DDR_PHY_CLK] = {
|
|
.channel = BCM_CYGNUS_LCPLL0_DDR_PHY_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x0, 8, 2, 14),
|
|
.mdiv = REG_VAL(0x8, 10, 8),
|
|
},
|
|
[BCM_CYGNUS_LCPLL0_SDIO_CLK] = {
|
|
.channel = BCM_CYGNUS_LCPLL0_SDIO_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x0, 9, 3, 15),
|
|
.mdiv = REG_VAL(0x8, 20, 8),
|
|
},
|
|
[BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK] = {
|
|
.channel = BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x0, 10, 4, 16),
|
|
.mdiv = REG_VAL(0xc, 0, 8),
|
|
},
|
|
[BCM_CYGNUS_LCPLL0_SMART_CARD_CLK] = {
|
|
.channel = BCM_CYGNUS_LCPLL0_SMART_CARD_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x0, 11, 5, 17),
|
|
.mdiv = REG_VAL(0xc, 10, 8),
|
|
},
|
|
[BCM_CYGNUS_LCPLL0_CH5_UNUSED] = {
|
|
.channel = BCM_CYGNUS_LCPLL0_CH5_UNUSED,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x0, 12, 6, 18),
|
|
.mdiv = REG_VAL(0xc, 20, 8),
|
|
},
|
|
};
|
|
|
|
static void __init cygnus_lcpll0_clk_init(struct device_node *node)
|
|
{
|
|
iproc_pll_clk_setup(node, &lcpll0, NULL, 0, lcpll0_clk,
|
|
ARRAY_SIZE(lcpll0_clk));
|
|
}
|
|
CLK_OF_DECLARE(cygnus_lcpll0, "brcm,cygnus-lcpll0", cygnus_lcpll0_clk_init);
|
|
|
|
/*
|
|
* MIPI PLL VCO frequency parameter table
|
|
*/
|
|
static const struct iproc_pll_vco_param mipipll_vco_params[] = {
|
|
/* rate (Hz) ndiv_int ndiv_frac pdiv */
|
|
{ 750000000UL, 30, 0, 1 },
|
|
{ 1000000000UL, 40, 0, 1 },
|
|
{ 1350000000ul, 54, 0, 1 },
|
|
{ 2000000000UL, 80, 0, 1 },
|
|
{ 2100000000UL, 84, 0, 1 },
|
|
{ 2250000000UL, 90, 0, 1 },
|
|
{ 2500000000UL, 100, 0, 1 },
|
|
{ 2700000000UL, 54, 0, 0 },
|
|
{ 2975000000UL, 119, 0, 1 },
|
|
{ 3100000000UL, 124, 0, 1 },
|
|
{ 3150000000UL, 126, 0, 1 },
|
|
};
|
|
|
|
static const struct iproc_pll_ctrl mipipll = {
|
|
.flags = IPROC_CLK_PLL_ASIU | IPROC_CLK_PLL_HAS_NDIV_FRAC |
|
|
IPROC_CLK_NEEDS_READ_BACK,
|
|
.aon = AON_VAL(0x0, 4, 17, 16),
|
|
.asiu = ASIU_GATE_VAL(0x0, 3),
|
|
.reset = RESET_VAL(0x0, 11, 10),
|
|
.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 4),
|
|
.ndiv_int = REG_VAL(0x10, 20, 10),
|
|
.ndiv_frac = REG_VAL(0x10, 0, 20),
|
|
.pdiv = REG_VAL(0x14, 0, 4),
|
|
.vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
|
|
.status = REG_VAL(0x28, 12, 1),
|
|
};
|
|
|
|
static const struct iproc_clk_ctrl mipipll_clk[] = {
|
|
[BCM_CYGNUS_MIPIPLL_CH0_UNUSED] = {
|
|
.channel = BCM_CYGNUS_MIPIPLL_CH0_UNUSED,
|
|
.flags = IPROC_CLK_NEEDS_READ_BACK,
|
|
.enable = ENABLE_VAL(0x4, 12, 6, 18),
|
|
.mdiv = REG_VAL(0x20, 0, 8),
|
|
},
|
|
[BCM_CYGNUS_MIPIPLL_CH1_LCD] = {
|
|
.channel = BCM_CYGNUS_MIPIPLL_CH1_LCD,
|
|
.flags = IPROC_CLK_NEEDS_READ_BACK,
|
|
.enable = ENABLE_VAL(0x4, 13, 7, 19),
|
|
.mdiv = REG_VAL(0x20, 10, 8),
|
|
},
|
|
[BCM_CYGNUS_MIPIPLL_CH2_V3D] = {
|
|
.channel = BCM_CYGNUS_MIPIPLL_CH2_V3D,
|
|
.flags = IPROC_CLK_NEEDS_READ_BACK,
|
|
.enable = ENABLE_VAL(0x4, 14, 8, 20),
|
|
.mdiv = REG_VAL(0x20, 20, 8),
|
|
},
|
|
[BCM_CYGNUS_MIPIPLL_CH3_UNUSED] = {
|
|
.channel = BCM_CYGNUS_MIPIPLL_CH3_UNUSED,
|
|
.flags = IPROC_CLK_NEEDS_READ_BACK,
|
|
.enable = ENABLE_VAL(0x4, 15, 9, 21),
|
|
.mdiv = REG_VAL(0x24, 0, 8),
|
|
},
|
|
[BCM_CYGNUS_MIPIPLL_CH4_UNUSED] = {
|
|
.channel = BCM_CYGNUS_MIPIPLL_CH4_UNUSED,
|
|
.flags = IPROC_CLK_NEEDS_READ_BACK,
|
|
.enable = ENABLE_VAL(0x4, 16, 10, 22),
|
|
.mdiv = REG_VAL(0x24, 10, 8),
|
|
},
|
|
[BCM_CYGNUS_MIPIPLL_CH5_UNUSED] = {
|
|
.channel = BCM_CYGNUS_MIPIPLL_CH5_UNUSED,
|
|
.flags = IPROC_CLK_NEEDS_READ_BACK,
|
|
.enable = ENABLE_VAL(0x4, 17, 11, 23),
|
|
.mdiv = REG_VAL(0x24, 20, 8),
|
|
},
|
|
};
|
|
|
|
static void __init cygnus_mipipll_clk_init(struct device_node *node)
|
|
{
|
|
iproc_pll_clk_setup(node, &mipipll, mipipll_vco_params,
|
|
ARRAY_SIZE(mipipll_vco_params), mipipll_clk,
|
|
ARRAY_SIZE(mipipll_clk));
|
|
}
|
|
CLK_OF_DECLARE(cygnus_mipipll, "brcm,cygnus-mipipll", cygnus_mipipll_clk_init);
|
|
|
|
static const struct iproc_asiu_div asiu_div[] = {
|
|
[BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_DIV_VAL(0x0, 31, 16, 10, 0, 10),
|
|
[BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_DIV_VAL(0x4, 31, 16, 10, 0, 10),
|
|
[BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_DIV_VAL(0x8, 31, 16, 10, 0, 10),
|
|
};
|
|
|
|
static const struct iproc_asiu_gate asiu_gate[] = {
|
|
[BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_GATE_VAL(0x0, 7),
|
|
[BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_GATE_VAL(0x0, 9),
|
|
[BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_GATE_VAL(IPROC_CLK_INVALID_OFFSET, 0),
|
|
};
|
|
|
|
static void __init cygnus_asiu_init(struct device_node *node)
|
|
{
|
|
iproc_asiu_setup(node, asiu_div, asiu_gate, ARRAY_SIZE(asiu_div));
|
|
}
|
|
CLK_OF_DECLARE(cygnus_asiu_clk, "brcm,cygnus-asiu-clk", cygnus_asiu_init);
|