mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
ba714a9c1d
The AMD pinctrl driver uses a chained interrupt to demultiplex the GPIO interrupts. Kevin Vandeventer reported, that his new AMD Ryzen locks up hard on boot when the AMD pinctrl driver is initialized. The reason is an interrupt storm. It's not clear whether that's caused by hardware or firmware or both. Using chained interrupts on X86 is a dangerous endavour. If a system is misconfigured or the hardware buggy there is no safety net to catch an interrupt storm. Convert the driver to use a regular interrupt for the demultiplex handler. This allows the interrupt storm detector to catch the malfunction and lets the system boot up. This should be backported to stable because it's likely that more users run into this problem as the AMD Ryzen machines are spreading. Reported-by: Kevin Vandeventer Link: https://bugzilla.suse.com/show_bug.cgi?id=1034261 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
862 lines
22 KiB
C
862 lines
22 KiB
C
/*
|
|
* GPIO driver for AMD
|
|
*
|
|
* Copyright (c) 2014,2015 AMD Corporation.
|
|
* Authors: Ken Xue <Ken.Xue@amd.com>
|
|
* Wu, Jeff <Jeff.Wu@amd.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/list.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
|
|
#include "pinctrl-utils.h"
|
|
#include "pinctrl-amd.h"
|
|
|
|
static int amd_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
unsigned long flags;
|
|
u32 pin_reg;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + offset * 4);
|
|
pin_reg &= ~BIT(OUTPUT_ENABLE_OFF);
|
|
writel(pin_reg, gpio_dev->base + offset * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amd_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
|
|
int value)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + offset * 4);
|
|
pin_reg |= BIT(OUTPUT_ENABLE_OFF);
|
|
if (value)
|
|
pin_reg |= BIT(OUTPUT_VALUE_OFF);
|
|
else
|
|
pin_reg &= ~BIT(OUTPUT_VALUE_OFF);
|
|
writel(pin_reg, gpio_dev->base + offset * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amd_gpio_get_value(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + offset * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return !!(pin_reg & BIT(PIN_STS_OFF));
|
|
}
|
|
|
|
static void amd_gpio_set_value(struct gpio_chip *gc, unsigned offset, int value)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + offset * 4);
|
|
if (value)
|
|
pin_reg |= BIT(OUTPUT_VALUE_OFF);
|
|
else
|
|
pin_reg &= ~BIT(OUTPUT_VALUE_OFF);
|
|
writel(pin_reg, gpio_dev->base + offset * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
}
|
|
|
|
static int amd_gpio_set_debounce(struct gpio_chip *gc, unsigned offset,
|
|
unsigned debounce)
|
|
{
|
|
u32 time;
|
|
u32 pin_reg;
|
|
int ret = 0;
|
|
unsigned long flags;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + offset * 4);
|
|
|
|
if (debounce) {
|
|
pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
|
|
pin_reg &= ~DB_TMR_OUT_MASK;
|
|
/*
|
|
Debounce Debounce Timer Max
|
|
TmrLarge TmrOutUnit Unit Debounce
|
|
Time
|
|
0 0 61 usec (2 RtcClk) 976 usec
|
|
0 1 244 usec (8 RtcClk) 3.9 msec
|
|
1 0 15.6 msec (512 RtcClk) 250 msec
|
|
1 1 62.5 msec (2048 RtcClk) 1 sec
|
|
*/
|
|
|
|
if (debounce < 61) {
|
|
pin_reg |= 1;
|
|
pin_reg &= ~BIT(DB_TMR_OUT_UNIT_OFF);
|
|
pin_reg &= ~BIT(DB_TMR_LARGE_OFF);
|
|
} else if (debounce < 976) {
|
|
time = debounce / 61;
|
|
pin_reg |= time & DB_TMR_OUT_MASK;
|
|
pin_reg &= ~BIT(DB_TMR_OUT_UNIT_OFF);
|
|
pin_reg &= ~BIT(DB_TMR_LARGE_OFF);
|
|
} else if (debounce < 3900) {
|
|
time = debounce / 244;
|
|
pin_reg |= time & DB_TMR_OUT_MASK;
|
|
pin_reg |= BIT(DB_TMR_OUT_UNIT_OFF);
|
|
pin_reg &= ~BIT(DB_TMR_LARGE_OFF);
|
|
} else if (debounce < 250000) {
|
|
time = debounce / 15600;
|
|
pin_reg |= time & DB_TMR_OUT_MASK;
|
|
pin_reg &= ~BIT(DB_TMR_OUT_UNIT_OFF);
|
|
pin_reg |= BIT(DB_TMR_LARGE_OFF);
|
|
} else if (debounce < 1000000) {
|
|
time = debounce / 62500;
|
|
pin_reg |= time & DB_TMR_OUT_MASK;
|
|
pin_reg |= BIT(DB_TMR_OUT_UNIT_OFF);
|
|
pin_reg |= BIT(DB_TMR_LARGE_OFF);
|
|
} else {
|
|
pin_reg &= ~DB_CNTRl_MASK;
|
|
ret = -EINVAL;
|
|
}
|
|
} else {
|
|
pin_reg &= ~BIT(DB_TMR_OUT_UNIT_OFF);
|
|
pin_reg &= ~BIT(DB_TMR_LARGE_OFF);
|
|
pin_reg &= ~DB_TMR_OUT_MASK;
|
|
pin_reg &= ~DB_CNTRl_MASK;
|
|
}
|
|
writel(pin_reg, gpio_dev->base + offset * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int amd_gpio_set_config(struct gpio_chip *gc, unsigned offset,
|
|
unsigned long config)
|
|
{
|
|
u32 debounce;
|
|
|
|
if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
|
|
return -ENOTSUPP;
|
|
|
|
debounce = pinconf_to_config_argument(config);
|
|
return amd_gpio_set_debounce(gc, offset, debounce);
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
unsigned int bank, i, pin_num;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
char *level_trig;
|
|
char *active_level;
|
|
char *interrupt_enable;
|
|
char *interrupt_mask;
|
|
char *wake_cntrl0;
|
|
char *wake_cntrl1;
|
|
char *wake_cntrl2;
|
|
char *pin_sts;
|
|
char *pull_up_sel;
|
|
char *pull_up_enable;
|
|
char *pull_down_enable;
|
|
char *output_value;
|
|
char *output_enable;
|
|
|
|
for (bank = 0; bank < gpio_dev->hwbank_num; bank++) {
|
|
seq_printf(s, "GPIO bank%d\t", bank);
|
|
|
|
switch (bank) {
|
|
case 0:
|
|
i = 0;
|
|
pin_num = AMD_GPIO_PINS_BANK0;
|
|
break;
|
|
case 1:
|
|
i = 64;
|
|
pin_num = AMD_GPIO_PINS_BANK1 + i;
|
|
break;
|
|
case 2:
|
|
i = 128;
|
|
pin_num = AMD_GPIO_PINS_BANK2 + i;
|
|
break;
|
|
case 3:
|
|
i = 192;
|
|
pin_num = AMD_GPIO_PINS_BANK3 + i;
|
|
break;
|
|
default:
|
|
/* Illegal bank number, ignore */
|
|
continue;
|
|
}
|
|
for (; i < pin_num; i++) {
|
|
seq_printf(s, "pin%d\t", i);
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + i * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
if (pin_reg & BIT(INTERRUPT_ENABLE_OFF)) {
|
|
interrupt_enable = "interrupt is enabled|";
|
|
|
|
if (!(pin_reg & BIT(ACTIVE_LEVEL_OFF)) &&
|
|
!(pin_reg & BIT(ACTIVE_LEVEL_OFF + 1)))
|
|
active_level = "Active low|";
|
|
else if (pin_reg & BIT(ACTIVE_LEVEL_OFF) &&
|
|
!(pin_reg & BIT(ACTIVE_LEVEL_OFF + 1)))
|
|
active_level = "Active high|";
|
|
else if (!(pin_reg & BIT(ACTIVE_LEVEL_OFF)) &&
|
|
pin_reg & BIT(ACTIVE_LEVEL_OFF + 1))
|
|
active_level = "Active on both|";
|
|
else
|
|
active_level = "Unknown Active level|";
|
|
|
|
if (pin_reg & BIT(LEVEL_TRIG_OFF))
|
|
level_trig = "Level trigger|";
|
|
else
|
|
level_trig = "Edge trigger|";
|
|
|
|
} else {
|
|
interrupt_enable =
|
|
"interrupt is disabled|";
|
|
active_level = " ";
|
|
level_trig = " ";
|
|
}
|
|
|
|
if (pin_reg & BIT(INTERRUPT_MASK_OFF))
|
|
interrupt_mask =
|
|
"interrupt is unmasked|";
|
|
else
|
|
interrupt_mask =
|
|
"interrupt is masked|";
|
|
|
|
if (pin_reg & BIT(WAKE_CNTRL_OFF_S0I3))
|
|
wake_cntrl0 = "enable wakeup in S0i3 state|";
|
|
else
|
|
wake_cntrl0 = "disable wakeup in S0i3 state|";
|
|
|
|
if (pin_reg & BIT(WAKE_CNTRL_OFF_S3))
|
|
wake_cntrl1 = "enable wakeup in S3 state|";
|
|
else
|
|
wake_cntrl1 = "disable wakeup in S3 state|";
|
|
|
|
if (pin_reg & BIT(WAKE_CNTRL_OFF_S4))
|
|
wake_cntrl2 = "enable wakeup in S4/S5 state|";
|
|
else
|
|
wake_cntrl2 = "disable wakeup in S4/S5 state|";
|
|
|
|
if (pin_reg & BIT(PULL_UP_ENABLE_OFF)) {
|
|
pull_up_enable = "pull-up is enabled|";
|
|
if (pin_reg & BIT(PULL_UP_SEL_OFF))
|
|
pull_up_sel = "8k pull-up|";
|
|
else
|
|
pull_up_sel = "4k pull-up|";
|
|
} else {
|
|
pull_up_enable = "pull-up is disabled|";
|
|
pull_up_sel = " ";
|
|
}
|
|
|
|
if (pin_reg & BIT(PULL_DOWN_ENABLE_OFF))
|
|
pull_down_enable = "pull-down is enabled|";
|
|
else
|
|
pull_down_enable = "Pull-down is disabled|";
|
|
|
|
if (pin_reg & BIT(OUTPUT_ENABLE_OFF)) {
|
|
pin_sts = " ";
|
|
output_enable = "output is enabled|";
|
|
if (pin_reg & BIT(OUTPUT_VALUE_OFF))
|
|
output_value = "output is high|";
|
|
else
|
|
output_value = "output is low|";
|
|
} else {
|
|
output_enable = "output is disabled|";
|
|
output_value = " ";
|
|
|
|
if (pin_reg & BIT(PIN_STS_OFF))
|
|
pin_sts = "input is high|";
|
|
else
|
|
pin_sts = "input is low|";
|
|
}
|
|
|
|
seq_printf(s, "%s %s %s %s %s %s\n"
|
|
" %s %s %s %s %s %s %s 0x%x\n",
|
|
level_trig, active_level, interrupt_enable,
|
|
interrupt_mask, wake_cntrl0, wake_cntrl1,
|
|
wake_cntrl2, pin_sts, pull_up_sel,
|
|
pull_up_enable, pull_down_enable,
|
|
output_value, output_enable, pin_reg);
|
|
}
|
|
}
|
|
}
|
|
#else
|
|
#define amd_gpio_dbg_show NULL
|
|
#endif
|
|
|
|
static void amd_gpio_irq_enable(struct irq_data *d)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
|
|
pin_reg |= BIT(INTERRUPT_ENABLE_OFF);
|
|
pin_reg |= BIT(INTERRUPT_MASK_OFF);
|
|
writel(pin_reg, gpio_dev->base + (d->hwirq)*4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
}
|
|
|
|
static void amd_gpio_irq_disable(struct irq_data *d)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
|
|
pin_reg &= ~BIT(INTERRUPT_ENABLE_OFF);
|
|
pin_reg &= ~BIT(INTERRUPT_MASK_OFF);
|
|
writel(pin_reg, gpio_dev->base + (d->hwirq)*4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
}
|
|
|
|
static void amd_gpio_irq_mask(struct irq_data *d)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
|
|
pin_reg &= ~BIT(INTERRUPT_MASK_OFF);
|
|
writel(pin_reg, gpio_dev->base + (d->hwirq)*4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
}
|
|
|
|
static void amd_gpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
|
|
pin_reg |= BIT(INTERRUPT_MASK_OFF);
|
|
writel(pin_reg, gpio_dev->base + (d->hwirq)*4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
}
|
|
|
|
static void amd_gpio_irq_eoi(struct irq_data *d)
|
|
{
|
|
u32 reg;
|
|
unsigned long flags;
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
reg = readl(gpio_dev->base + WAKE_INT_MASTER_REG);
|
|
reg |= EOI_MASK;
|
|
writel(reg, gpio_dev->base + WAKE_INT_MASTER_REG);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
}
|
|
|
|
static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
int ret = 0;
|
|
u32 pin_reg;
|
|
unsigned long flags, irq_flags;
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
|
|
|
|
/* Ignore the settings coming from the client and
|
|
* read the values from the ACPI tables
|
|
* while setting the trigger type
|
|
*/
|
|
|
|
irq_flags = irq_get_trigger_type(d->irq);
|
|
if (irq_flags != IRQ_TYPE_NONE)
|
|
type = irq_flags;
|
|
|
|
switch (type & IRQ_TYPE_SENSE_MASK) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
pin_reg &= ~BIT(LEVEL_TRIG_OFF);
|
|
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
|
|
pin_reg |= ACTIVE_HIGH << ACTIVE_LEVEL_OFF;
|
|
pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
pin_reg &= ~BIT(LEVEL_TRIG_OFF);
|
|
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
|
|
pin_reg |= ACTIVE_LOW << ACTIVE_LEVEL_OFF;
|
|
pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
pin_reg &= ~BIT(LEVEL_TRIG_OFF);
|
|
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
|
|
pin_reg |= BOTH_EADGE << ACTIVE_LEVEL_OFF;
|
|
pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
pin_reg |= LEVEL_TRIGGER << LEVEL_TRIG_OFF;
|
|
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
|
|
pin_reg |= ACTIVE_HIGH << ACTIVE_LEVEL_OFF;
|
|
pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
|
|
pin_reg |= DB_TYPE_PRESERVE_LOW_GLITCH << DB_CNTRL_OFF;
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
pin_reg |= LEVEL_TRIGGER << LEVEL_TRIG_OFF;
|
|
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
|
|
pin_reg |= ACTIVE_LOW << ACTIVE_LEVEL_OFF;
|
|
pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
|
|
pin_reg |= DB_TYPE_PRESERVE_HIGH_GLITCH << DB_CNTRL_OFF;
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
break;
|
|
|
|
case IRQ_TYPE_NONE:
|
|
break;
|
|
|
|
default:
|
|
dev_err(&gpio_dev->pdev->dev, "Invalid type value\n");
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
pin_reg |= CLR_INTR_STAT << INTERRUPT_STS_OFF;
|
|
writel(pin_reg, gpio_dev->base + (d->hwirq)*4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void amd_irq_ack(struct irq_data *d)
|
|
{
|
|
/*
|
|
* based on HW design,there is no need to ack HW
|
|
* before handle current irq. But this routine is
|
|
* necessary for handle_edge_irq
|
|
*/
|
|
}
|
|
|
|
static struct irq_chip amd_gpio_irqchip = {
|
|
.name = "amd_gpio",
|
|
.irq_ack = amd_irq_ack,
|
|
.irq_enable = amd_gpio_irq_enable,
|
|
.irq_disable = amd_gpio_irq_disable,
|
|
.irq_mask = amd_gpio_irq_mask,
|
|
.irq_unmask = amd_gpio_irq_unmask,
|
|
.irq_eoi = amd_gpio_irq_eoi,
|
|
.irq_set_type = amd_gpio_irq_set_type,
|
|
.flags = IRQCHIP_SKIP_SET_WAKE,
|
|
};
|
|
|
|
#define PIN_IRQ_PENDING (BIT(INTERRUPT_STS_OFF) | BIT(WAKE_STS_OFF))
|
|
|
|
static irqreturn_t amd_gpio_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct amd_gpio *gpio_dev = dev_id;
|
|
struct gpio_chip *gc = &gpio_dev->gc;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
unsigned int i, irqnr;
|
|
unsigned long flags;
|
|
u32 *regs, regval;
|
|
u64 status, mask;
|
|
|
|
/* Read the wake status */
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
status = readl(gpio_dev->base + WAKE_INT_STATUS_REG1);
|
|
status <<= 32;
|
|
status |= readl(gpio_dev->base + WAKE_INT_STATUS_REG0);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
/* Bit 0-45 contain the relevant status bits */
|
|
status &= (1ULL << 46) - 1;
|
|
regs = gpio_dev->base;
|
|
for (mask = 1, irqnr = 0; status; mask <<= 1, regs += 4, irqnr += 4) {
|
|
if (!(status & mask))
|
|
continue;
|
|
status &= ~mask;
|
|
|
|
/* Each status bit covers four pins */
|
|
for (i = 0; i < 4; i++) {
|
|
regval = readl(regs + i);
|
|
if (!(regval & PIN_IRQ_PENDING))
|
|
continue;
|
|
irq = irq_find_mapping(gc->irqdomain, irqnr + i);
|
|
generic_handle_irq(irq);
|
|
/* Clear interrupt */
|
|
writel(regval, regs + i);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
/* Signal EOI to the GPIO unit */
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
regval = readl(gpio_dev->base + WAKE_INT_MASTER_REG);
|
|
regval |= EOI_MASK;
|
|
writel(regval, gpio_dev->base + WAKE_INT_MASTER_REG);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int amd_get_groups_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct amd_gpio *gpio_dev = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return gpio_dev->ngroups;
|
|
}
|
|
|
|
static const char *amd_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned group)
|
|
{
|
|
struct amd_gpio *gpio_dev = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return gpio_dev->groups[group].name;
|
|
}
|
|
|
|
static int amd_get_group_pins(struct pinctrl_dev *pctldev,
|
|
unsigned group,
|
|
const unsigned **pins,
|
|
unsigned *num_pins)
|
|
{
|
|
struct amd_gpio *gpio_dev = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*pins = gpio_dev->groups[group].pins;
|
|
*num_pins = gpio_dev->groups[group].npins;
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinctrl_ops amd_pinctrl_ops = {
|
|
.get_groups_count = amd_get_groups_count,
|
|
.get_group_name = amd_get_group_name,
|
|
.get_group_pins = amd_get_group_pins,
|
|
#ifdef CONFIG_OF
|
|
.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
|
|
.dt_free_map = pinctrl_utils_free_map,
|
|
#endif
|
|
};
|
|
|
|
static int amd_pinconf_get(struct pinctrl_dev *pctldev,
|
|
unsigned int pin,
|
|
unsigned long *config)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned arg;
|
|
unsigned long flags;
|
|
struct amd_gpio *gpio_dev = pinctrl_dev_get_drvdata(pctldev);
|
|
enum pin_config_param param = pinconf_to_config_param(*config);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + pin*4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
switch (param) {
|
|
case PIN_CONFIG_INPUT_DEBOUNCE:
|
|
arg = pin_reg & DB_TMR_OUT_MASK;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
arg = (pin_reg >> PULL_DOWN_ENABLE_OFF) & BIT(0);
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
arg = (pin_reg >> PULL_UP_SEL_OFF) & (BIT(0) | BIT(1));
|
|
break;
|
|
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
arg = (pin_reg >> DRV_STRENGTH_SEL_OFF) & DRV_STRENGTH_SEL_MASK;
|
|
break;
|
|
|
|
default:
|
|
dev_err(&gpio_dev->pdev->dev, "Invalid config param %04x\n",
|
|
param);
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
*config = pinconf_to_config_packed(param, arg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amd_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
|
|
unsigned long *configs, unsigned num_configs)
|
|
{
|
|
int i;
|
|
u32 arg;
|
|
int ret = 0;
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
enum pin_config_param param;
|
|
struct amd_gpio *gpio_dev = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
for (i = 0; i < num_configs; i++) {
|
|
param = pinconf_to_config_param(configs[i]);
|
|
arg = pinconf_to_config_argument(configs[i]);
|
|
pin_reg = readl(gpio_dev->base + pin*4);
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_INPUT_DEBOUNCE:
|
|
pin_reg &= ~DB_TMR_OUT_MASK;
|
|
pin_reg |= arg & DB_TMR_OUT_MASK;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
pin_reg &= ~BIT(PULL_DOWN_ENABLE_OFF);
|
|
pin_reg |= (arg & BIT(0)) << PULL_DOWN_ENABLE_OFF;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
pin_reg &= ~BIT(PULL_UP_SEL_OFF);
|
|
pin_reg |= (arg & BIT(0)) << PULL_UP_SEL_OFF;
|
|
pin_reg &= ~BIT(PULL_UP_ENABLE_OFF);
|
|
pin_reg |= ((arg>>1) & BIT(0)) << PULL_UP_ENABLE_OFF;
|
|
break;
|
|
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
pin_reg &= ~(DRV_STRENGTH_SEL_MASK
|
|
<< DRV_STRENGTH_SEL_OFF);
|
|
pin_reg |= (arg & DRV_STRENGTH_SEL_MASK)
|
|
<< DRV_STRENGTH_SEL_OFF;
|
|
break;
|
|
|
|
default:
|
|
dev_err(&gpio_dev->pdev->dev,
|
|
"Invalid config param %04x\n", param);
|
|
ret = -ENOTSUPP;
|
|
}
|
|
|
|
writel(pin_reg, gpio_dev->base + pin*4);
|
|
}
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int amd_pinconf_group_get(struct pinctrl_dev *pctldev,
|
|
unsigned int group,
|
|
unsigned long *config)
|
|
{
|
|
const unsigned *pins;
|
|
unsigned npins;
|
|
int ret;
|
|
|
|
ret = amd_get_group_pins(pctldev, group, &pins, &npins);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (amd_pinconf_get(pctldev, pins[0], config))
|
|
return -ENOTSUPP;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amd_pinconf_group_set(struct pinctrl_dev *pctldev,
|
|
unsigned group, unsigned long *configs,
|
|
unsigned num_configs)
|
|
{
|
|
const unsigned *pins;
|
|
unsigned npins;
|
|
int i, ret;
|
|
|
|
ret = amd_get_group_pins(pctldev, group, &pins, &npins);
|
|
if (ret)
|
|
return ret;
|
|
for (i = 0; i < npins; i++) {
|
|
if (amd_pinconf_set(pctldev, pins[i], configs, num_configs))
|
|
return -ENOTSUPP;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinconf_ops amd_pinconf_ops = {
|
|
.pin_config_get = amd_pinconf_get,
|
|
.pin_config_set = amd_pinconf_set,
|
|
.pin_config_group_get = amd_pinconf_group_get,
|
|
.pin_config_group_set = amd_pinconf_group_set,
|
|
};
|
|
|
|
static struct pinctrl_desc amd_pinctrl_desc = {
|
|
.pins = kerncz_pins,
|
|
.npins = ARRAY_SIZE(kerncz_pins),
|
|
.pctlops = &amd_pinctrl_ops,
|
|
.confops = &amd_pinconf_ops,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int amd_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
int ret = 0;
|
|
int irq_base;
|
|
struct resource *res;
|
|
struct amd_gpio *gpio_dev;
|
|
|
|
gpio_dev = devm_kzalloc(&pdev->dev,
|
|
sizeof(struct amd_gpio), GFP_KERNEL);
|
|
if (!gpio_dev)
|
|
return -ENOMEM;
|
|
|
|
raw_spin_lock_init(&gpio_dev->lock);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "Failed to get gpio io resource.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
gpio_dev->base = devm_ioremap_nocache(&pdev->dev, res->start,
|
|
resource_size(res));
|
|
if (!gpio_dev->base)
|
|
return -ENOMEM;
|
|
|
|
irq_base = platform_get_irq(pdev, 0);
|
|
if (irq_base < 0) {
|
|
dev_err(&pdev->dev, "Failed to get gpio IRQ.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
gpio_dev->pdev = pdev;
|
|
gpio_dev->gc.direction_input = amd_gpio_direction_input;
|
|
gpio_dev->gc.direction_output = amd_gpio_direction_output;
|
|
gpio_dev->gc.get = amd_gpio_get_value;
|
|
gpio_dev->gc.set = amd_gpio_set_value;
|
|
gpio_dev->gc.set_config = amd_gpio_set_config;
|
|
gpio_dev->gc.dbg_show = amd_gpio_dbg_show;
|
|
|
|
gpio_dev->gc.base = -1;
|
|
gpio_dev->gc.label = pdev->name;
|
|
gpio_dev->gc.owner = THIS_MODULE;
|
|
gpio_dev->gc.parent = &pdev->dev;
|
|
gpio_dev->gc.ngpio = resource_size(res) / 4;
|
|
#if defined(CONFIG_OF_GPIO)
|
|
gpio_dev->gc.of_node = pdev->dev.of_node;
|
|
#endif
|
|
|
|
gpio_dev->hwbank_num = gpio_dev->gc.ngpio / 64;
|
|
gpio_dev->groups = kerncz_groups;
|
|
gpio_dev->ngroups = ARRAY_SIZE(kerncz_groups);
|
|
|
|
amd_pinctrl_desc.name = dev_name(&pdev->dev);
|
|
gpio_dev->pctrl = devm_pinctrl_register(&pdev->dev, &amd_pinctrl_desc,
|
|
gpio_dev);
|
|
if (IS_ERR(gpio_dev->pctrl)) {
|
|
dev_err(&pdev->dev, "Couldn't register pinctrl driver\n");
|
|
return PTR_ERR(gpio_dev->pctrl);
|
|
}
|
|
|
|
ret = gpiochip_add_data(&gpio_dev->gc, gpio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = gpiochip_add_pin_range(&gpio_dev->gc, dev_name(&pdev->dev),
|
|
0, 0, gpio_dev->gc.ngpio);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to add pin range\n");
|
|
goto out2;
|
|
}
|
|
|
|
ret = gpiochip_irqchip_add(&gpio_dev->gc,
|
|
&amd_gpio_irqchip,
|
|
0,
|
|
handle_simple_irq,
|
|
IRQ_TYPE_NONE);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "could not add irqchip\n");
|
|
ret = -ENODEV;
|
|
goto out2;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq_base, amd_gpio_irq_handler, 0,
|
|
KBUILD_MODNAME, gpio_dev);
|
|
if (ret)
|
|
goto out2;
|
|
|
|
platform_set_drvdata(pdev, gpio_dev);
|
|
|
|
dev_dbg(&pdev->dev, "amd gpio driver loaded\n");
|
|
return ret;
|
|
|
|
out2:
|
|
gpiochip_remove(&gpio_dev->gc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int amd_gpio_remove(struct platform_device *pdev)
|
|
{
|
|
struct amd_gpio *gpio_dev;
|
|
|
|
gpio_dev = platform_get_drvdata(pdev);
|
|
|
|
gpiochip_remove(&gpio_dev->gc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct acpi_device_id amd_gpio_acpi_match[] = {
|
|
{ "AMD0030", 0 },
|
|
{ "AMDI0030", 0},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, amd_gpio_acpi_match);
|
|
|
|
static struct platform_driver amd_gpio_driver = {
|
|
.driver = {
|
|
.name = "amd_gpio",
|
|
.acpi_match_table = ACPI_PTR(amd_gpio_acpi_match),
|
|
},
|
|
.probe = amd_gpio_probe,
|
|
.remove = amd_gpio_remove,
|
|
};
|
|
|
|
module_platform_driver(amd_gpio_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Ken Xue <Ken.Xue@amd.com>, Jeff Wu <Jeff.Wu@amd.com>");
|
|
MODULE_DESCRIPTION("AMD GPIO pinctrl driver");
|