mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 21:29:49 +07:00
0f74ab59ce
It is a hardware bug in RK3288, the only way to solve it is to reset the phy. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
522 lines
13 KiB
C
522 lines
13 KiB
C
/*
|
||
* Rockchip usb PHY driver
|
||
*
|
||
* Copyright (C) 2014 Yunzhi Li <lyz@rock-chips.com>
|
||
* Copyright (C) 2014 ROCKCHIP, Inc.
|
||
*
|
||
* This program is free software; you can redistribute it and/or modify
|
||
* it under the terms of the GNU General Public License as published by
|
||
* the Free Software Foundation; either version 2 of the License.
|
||
*
|
||
* This program is distributed in the hope that it will be useful,
|
||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
* GNU General Public License for more details.
|
||
*/
|
||
|
||
#include <linux/clk.h>
|
||
#include <linux/clk-provider.h>
|
||
#include <linux/io.h>
|
||
#include <linux/kernel.h>
|
||
#include <linux/module.h>
|
||
#include <linux/mutex.h>
|
||
#include <linux/of.h>
|
||
#include <linux/of_address.h>
|
||
#include <linux/of_platform.h>
|
||
#include <linux/phy/phy.h>
|
||
#include <linux/platform_device.h>
|
||
#include <linux/regulator/consumer.h>
|
||
#include <linux/reset.h>
|
||
#include <linux/regmap.h>
|
||
#include <linux/mfd/syscon.h>
|
||
#include <linux/delay.h>
|
||
|
||
static int enable_usb_uart;
|
||
|
||
#define HIWORD_UPDATE(val, mask) \
|
||
((val) | (mask) << 16)
|
||
|
||
#define UOC_CON0_SIDDQ BIT(13)
|
||
|
||
struct rockchip_usb_phys {
|
||
int reg;
|
||
const char *pll_name;
|
||
};
|
||
|
||
struct rockchip_usb_phy_base;
|
||
struct rockchip_usb_phy_pdata {
|
||
struct rockchip_usb_phys *phys;
|
||
int (*init_usb_uart)(struct regmap *grf);
|
||
int usb_uart_phy;
|
||
};
|
||
|
||
struct rockchip_usb_phy_base {
|
||
struct device *dev;
|
||
struct regmap *reg_base;
|
||
const struct rockchip_usb_phy_pdata *pdata;
|
||
};
|
||
|
||
struct rockchip_usb_phy {
|
||
struct rockchip_usb_phy_base *base;
|
||
struct device_node *np;
|
||
unsigned int reg_offset;
|
||
struct clk *clk;
|
||
struct clk *clk480m;
|
||
struct clk_hw clk480m_hw;
|
||
struct phy *phy;
|
||
bool uart_enabled;
|
||
struct reset_control *reset;
|
||
};
|
||
|
||
static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
|
||
bool siddq)
|
||
{
|
||
u32 val = HIWORD_UPDATE(siddq ? UOC_CON0_SIDDQ : 0, UOC_CON0_SIDDQ);
|
||
|
||
return regmap_write(phy->base->reg_base, phy->reg_offset, val);
|
||
}
|
||
|
||
static unsigned long rockchip_usb_phy480m_recalc_rate(struct clk_hw *hw,
|
||
unsigned long parent_rate)
|
||
{
|
||
return 480000000;
|
||
}
|
||
|
||
static void rockchip_usb_phy480m_disable(struct clk_hw *hw)
|
||
{
|
||
struct rockchip_usb_phy *phy = container_of(hw,
|
||
struct rockchip_usb_phy,
|
||
clk480m_hw);
|
||
|
||
/* Power down usb phy analog blocks by set siddq 1 */
|
||
rockchip_usb_phy_power(phy, 1);
|
||
}
|
||
|
||
static int rockchip_usb_phy480m_enable(struct clk_hw *hw)
|
||
{
|
||
struct rockchip_usb_phy *phy = container_of(hw,
|
||
struct rockchip_usb_phy,
|
||
clk480m_hw);
|
||
|
||
/* Power up usb phy analog blocks by set siddq 0 */
|
||
return rockchip_usb_phy_power(phy, 0);
|
||
}
|
||
|
||
static int rockchip_usb_phy480m_is_enabled(struct clk_hw *hw)
|
||
{
|
||
struct rockchip_usb_phy *phy = container_of(hw,
|
||
struct rockchip_usb_phy,
|
||
clk480m_hw);
|
||
int ret;
|
||
u32 val;
|
||
|
||
ret = regmap_read(phy->base->reg_base, phy->reg_offset, &val);
|
||
if (ret < 0)
|
||
return ret;
|
||
|
||
return (val & UOC_CON0_SIDDQ) ? 0 : 1;
|
||
}
|
||
|
||
static const struct clk_ops rockchip_usb_phy480m_ops = {
|
||
.enable = rockchip_usb_phy480m_enable,
|
||
.disable = rockchip_usb_phy480m_disable,
|
||
.is_enabled = rockchip_usb_phy480m_is_enabled,
|
||
.recalc_rate = rockchip_usb_phy480m_recalc_rate,
|
||
};
|
||
|
||
static int rockchip_usb_phy_power_off(struct phy *_phy)
|
||
{
|
||
struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
|
||
|
||
if (phy->uart_enabled)
|
||
return -EBUSY;
|
||
|
||
clk_disable_unprepare(phy->clk480m);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int rockchip_usb_phy_power_on(struct phy *_phy)
|
||
{
|
||
struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
|
||
|
||
if (phy->uart_enabled)
|
||
return -EBUSY;
|
||
|
||
return clk_prepare_enable(phy->clk480m);
|
||
}
|
||
|
||
static int rockchip_usb_phy_reset(struct phy *_phy)
|
||
{
|
||
struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
|
||
|
||
if (phy->reset) {
|
||
reset_control_assert(phy->reset);
|
||
udelay(10);
|
||
reset_control_deassert(phy->reset);
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static const struct phy_ops ops = {
|
||
.power_on = rockchip_usb_phy_power_on,
|
||
.power_off = rockchip_usb_phy_power_off,
|
||
.reset = rockchip_usb_phy_reset,
|
||
.owner = THIS_MODULE,
|
||
};
|
||
|
||
static void rockchip_usb_phy_action(void *data)
|
||
{
|
||
struct rockchip_usb_phy *rk_phy = data;
|
||
|
||
if (!rk_phy->uart_enabled) {
|
||
of_clk_del_provider(rk_phy->np);
|
||
clk_unregister(rk_phy->clk480m);
|
||
}
|
||
|
||
if (rk_phy->clk)
|
||
clk_put(rk_phy->clk);
|
||
}
|
||
|
||
static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
|
||
struct device_node *child)
|
||
{
|
||
struct rockchip_usb_phy *rk_phy;
|
||
unsigned int reg_offset;
|
||
const char *clk_name;
|
||
struct clk_init_data init;
|
||
int err, i;
|
||
|
||
rk_phy = devm_kzalloc(base->dev, sizeof(*rk_phy), GFP_KERNEL);
|
||
if (!rk_phy)
|
||
return -ENOMEM;
|
||
|
||
rk_phy->base = base;
|
||
rk_phy->np = child;
|
||
|
||
if (of_property_read_u32(child, "reg", ®_offset)) {
|
||
dev_err(base->dev, "missing reg property in node %s\n",
|
||
child->name);
|
||
return -EINVAL;
|
||
}
|
||
|
||
rk_phy->reset = of_reset_control_get(child, "phy-reset");
|
||
if (IS_ERR(rk_phy->reset))
|
||
rk_phy->reset = NULL;
|
||
|
||
rk_phy->reg_offset = reg_offset;
|
||
|
||
rk_phy->clk = of_clk_get_by_name(child, "phyclk");
|
||
if (IS_ERR(rk_phy->clk))
|
||
rk_phy->clk = NULL;
|
||
|
||
i = 0;
|
||
init.name = NULL;
|
||
while (base->pdata->phys[i].reg) {
|
||
if (base->pdata->phys[i].reg == reg_offset) {
|
||
init.name = base->pdata->phys[i].pll_name;
|
||
break;
|
||
}
|
||
i++;
|
||
}
|
||
|
||
if (!init.name) {
|
||
dev_err(base->dev, "phy data not found\n");
|
||
return -EINVAL;
|
||
}
|
||
|
||
if (enable_usb_uart && base->pdata->usb_uart_phy == i) {
|
||
dev_dbg(base->dev, "phy%d used as uart output\n", i);
|
||
rk_phy->uart_enabled = true;
|
||
} else {
|
||
if (rk_phy->clk) {
|
||
clk_name = __clk_get_name(rk_phy->clk);
|
||
init.flags = 0;
|
||
init.parent_names = &clk_name;
|
||
init.num_parents = 1;
|
||
} else {
|
||
init.flags = 0;
|
||
init.parent_names = NULL;
|
||
init.num_parents = 0;
|
||
}
|
||
|
||
init.ops = &rockchip_usb_phy480m_ops;
|
||
rk_phy->clk480m_hw.init = &init;
|
||
|
||
rk_phy->clk480m = clk_register(base->dev, &rk_phy->clk480m_hw);
|
||
if (IS_ERR(rk_phy->clk480m)) {
|
||
err = PTR_ERR(rk_phy->clk480m);
|
||
goto err_clk;
|
||
}
|
||
|
||
err = of_clk_add_provider(child, of_clk_src_simple_get,
|
||
rk_phy->clk480m);
|
||
if (err < 0)
|
||
goto err_clk_prov;
|
||
}
|
||
|
||
err = devm_add_action_or_reset(base->dev, rockchip_usb_phy_action,
|
||
rk_phy);
|
||
if (err)
|
||
return err;
|
||
|
||
rk_phy->phy = devm_phy_create(base->dev, child, &ops);
|
||
if (IS_ERR(rk_phy->phy)) {
|
||
dev_err(base->dev, "failed to create PHY\n");
|
||
return PTR_ERR(rk_phy->phy);
|
||
}
|
||
phy_set_drvdata(rk_phy->phy, rk_phy);
|
||
|
||
/*
|
||
* When acting as uart-pipe, just keep clock on otherwise
|
||
* only power up usb phy when it use, so disable it when init
|
||
*/
|
||
if (rk_phy->uart_enabled)
|
||
return clk_prepare_enable(rk_phy->clk);
|
||
else
|
||
return rockchip_usb_phy_power(rk_phy, 1);
|
||
|
||
err_clk_prov:
|
||
if (!rk_phy->uart_enabled)
|
||
clk_unregister(rk_phy->clk480m);
|
||
err_clk:
|
||
if (rk_phy->clk)
|
||
clk_put(rk_phy->clk);
|
||
return err;
|
||
}
|
||
|
||
static const struct rockchip_usb_phy_pdata rk3066a_pdata = {
|
||
.phys = (struct rockchip_usb_phys[]){
|
||
{ .reg = 0x17c, .pll_name = "sclk_otgphy0_480m" },
|
||
{ .reg = 0x188, .pll_name = "sclk_otgphy1_480m" },
|
||
{ /* sentinel */ }
|
||
},
|
||
};
|
||
|
||
static const struct rockchip_usb_phy_pdata rk3188_pdata = {
|
||
.phys = (struct rockchip_usb_phys[]){
|
||
{ .reg = 0x10c, .pll_name = "sclk_otgphy0_480m" },
|
||
{ .reg = 0x11c, .pll_name = "sclk_otgphy1_480m" },
|
||
{ /* sentinel */ }
|
||
},
|
||
};
|
||
|
||
#define RK3288_UOC0_CON0 0x320
|
||
#define RK3288_UOC0_CON0_COMMON_ON_N BIT(0)
|
||
#define RK3288_UOC0_CON0_DISABLE BIT(4)
|
||
|
||
#define RK3288_UOC0_CON2 0x328
|
||
#define RK3288_UOC0_CON2_SOFT_CON_SEL BIT(2)
|
||
|
||
#define RK3288_UOC0_CON3 0x32c
|
||
#define RK3288_UOC0_CON3_UTMI_SUSPENDN BIT(0)
|
||
#define RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING (1 << 1)
|
||
#define RK3288_UOC0_CON3_UTMI_OPMODE_MASK (3 << 1)
|
||
#define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC (1 << 3)
|
||
#define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK (3 << 3)
|
||
#define RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED BIT(5)
|
||
#define RK3288_UOC0_CON3_BYPASSDMEN BIT(6)
|
||
#define RK3288_UOC0_CON3_BYPASSSEL BIT(7)
|
||
|
||
/*
|
||
* Enable the bypass of uart2 data through the otg usb phy.
|
||
* Original description in the TRM.
|
||
* 1. Disable the OTG block by setting OTGDISABLE0 to 1’b1.
|
||
* 2. Disable the pull-up resistance on the D+ line by setting
|
||
* OPMODE0[1:0] to 2’b01.
|
||
* 3. To ensure that the XO, Bias, and PLL blocks are powered down in Suspend
|
||
* mode, set COMMONONN to 1’b1.
|
||
* 4. Place the USB PHY in Suspend mode by setting SUSPENDM0 to 1’b0.
|
||
* 5. Set BYPASSSEL0 to 1’b1.
|
||
* 6. To transmit data, controls BYPASSDMEN0, and BYPASSDMDATA0.
|
||
* To receive data, monitor FSVPLUS0.
|
||
*
|
||
* The actual code in the vendor kernel does some things differently.
|
||
*/
|
||
static int __init rk3288_init_usb_uart(struct regmap *grf)
|
||
{
|
||
u32 val;
|
||
int ret;
|
||
|
||
/*
|
||
* COMMON_ON and DISABLE settings are described in the TRM,
|
||
* but were not present in the original code.
|
||
* Also disable the analog phy components to save power.
|
||
*/
|
||
val = HIWORD_UPDATE(RK3288_UOC0_CON0_COMMON_ON_N
|
||
| RK3288_UOC0_CON0_DISABLE
|
||
| UOC_CON0_SIDDQ,
|
||
RK3288_UOC0_CON0_COMMON_ON_N
|
||
| RK3288_UOC0_CON0_DISABLE
|
||
| UOC_CON0_SIDDQ);
|
||
ret = regmap_write(grf, RK3288_UOC0_CON0, val);
|
||
if (ret)
|
||
return ret;
|
||
|
||
val = HIWORD_UPDATE(RK3288_UOC0_CON2_SOFT_CON_SEL,
|
||
RK3288_UOC0_CON2_SOFT_CON_SEL);
|
||
ret = regmap_write(grf, RK3288_UOC0_CON2, val);
|
||
if (ret)
|
||
return ret;
|
||
|
||
val = HIWORD_UPDATE(RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING
|
||
| RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC
|
||
| RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED,
|
||
RK3288_UOC0_CON3_UTMI_SUSPENDN
|
||
| RK3288_UOC0_CON3_UTMI_OPMODE_MASK
|
||
| RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK
|
||
| RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED);
|
||
ret = regmap_write(grf, RK3288_UOC0_CON3, val);
|
||
if (ret)
|
||
return ret;
|
||
|
||
val = HIWORD_UPDATE(RK3288_UOC0_CON3_BYPASSSEL
|
||
| RK3288_UOC0_CON3_BYPASSDMEN,
|
||
RK3288_UOC0_CON3_BYPASSSEL
|
||
| RK3288_UOC0_CON3_BYPASSDMEN);
|
||
ret = regmap_write(grf, RK3288_UOC0_CON3, val);
|
||
if (ret)
|
||
return ret;
|
||
|
||
return 0;
|
||
}
|
||
|
||
static const struct rockchip_usb_phy_pdata rk3288_pdata = {
|
||
.phys = (struct rockchip_usb_phys[]){
|
||
{ .reg = 0x320, .pll_name = "sclk_otgphy0_480m" },
|
||
{ .reg = 0x334, .pll_name = "sclk_otgphy1_480m" },
|
||
{ .reg = 0x348, .pll_name = "sclk_otgphy2_480m" },
|
||
{ /* sentinel */ }
|
||
},
|
||
.init_usb_uart = rk3288_init_usb_uart,
|
||
.usb_uart_phy = 0,
|
||
};
|
||
|
||
static int rockchip_usb_phy_probe(struct platform_device *pdev)
|
||
{
|
||
struct device *dev = &pdev->dev;
|
||
struct rockchip_usb_phy_base *phy_base;
|
||
struct phy_provider *phy_provider;
|
||
const struct of_device_id *match;
|
||
struct device_node *child;
|
||
int err;
|
||
|
||
phy_base = devm_kzalloc(dev, sizeof(*phy_base), GFP_KERNEL);
|
||
if (!phy_base)
|
||
return -ENOMEM;
|
||
|
||
match = of_match_device(dev->driver->of_match_table, dev);
|
||
if (!match || !match->data) {
|
||
dev_err(dev, "missing phy data\n");
|
||
return -EINVAL;
|
||
}
|
||
|
||
phy_base->pdata = match->data;
|
||
|
||
phy_base->dev = dev;
|
||
phy_base->reg_base = ERR_PTR(-ENODEV);
|
||
if (dev->parent && dev->parent->of_node)
|
||
phy_base->reg_base = syscon_node_to_regmap(
|
||
dev->parent->of_node);
|
||
if (IS_ERR(phy_base->reg_base))
|
||
phy_base->reg_base = syscon_regmap_lookup_by_phandle(
|
||
dev->of_node, "rockchip,grf");
|
||
if (IS_ERR(phy_base->reg_base)) {
|
||
dev_err(&pdev->dev, "Missing rockchip,grf property\n");
|
||
return PTR_ERR(phy_base->reg_base);
|
||
}
|
||
|
||
for_each_available_child_of_node(dev->of_node, child) {
|
||
err = rockchip_usb_phy_init(phy_base, child);
|
||
if (err) {
|
||
of_node_put(child);
|
||
return err;
|
||
}
|
||
}
|
||
|
||
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
||
return PTR_ERR_OR_ZERO(phy_provider);
|
||
}
|
||
|
||
static const struct of_device_id rockchip_usb_phy_dt_ids[] = {
|
||
{ .compatible = "rockchip,rk3066a-usb-phy", .data = &rk3066a_pdata },
|
||
{ .compatible = "rockchip,rk3188-usb-phy", .data = &rk3188_pdata },
|
||
{ .compatible = "rockchip,rk3288-usb-phy", .data = &rk3288_pdata },
|
||
{}
|
||
};
|
||
|
||
MODULE_DEVICE_TABLE(of, rockchip_usb_phy_dt_ids);
|
||
|
||
static struct platform_driver rockchip_usb_driver = {
|
||
.probe = rockchip_usb_phy_probe,
|
||
.driver = {
|
||
.name = "rockchip-usb-phy",
|
||
.of_match_table = rockchip_usb_phy_dt_ids,
|
||
},
|
||
};
|
||
|
||
module_platform_driver(rockchip_usb_driver);
|
||
|
||
#ifndef MODULE
|
||
static int __init rockchip_init_usb_uart(void)
|
||
{
|
||
const struct of_device_id *match;
|
||
const struct rockchip_usb_phy_pdata *data;
|
||
struct device_node *np;
|
||
struct regmap *grf;
|
||
int ret;
|
||
|
||
if (!enable_usb_uart)
|
||
return 0;
|
||
|
||
np = of_find_matching_node_and_match(NULL, rockchip_usb_phy_dt_ids,
|
||
&match);
|
||
if (!np) {
|
||
pr_err("%s: failed to find usbphy node\n", __func__);
|
||
return -ENOTSUPP;
|
||
}
|
||
|
||
pr_debug("%s: using settings for %s\n", __func__, match->compatible);
|
||
data = match->data;
|
||
|
||
if (!data->init_usb_uart) {
|
||
pr_err("%s: usb-uart not available on %s\n",
|
||
__func__, match->compatible);
|
||
return -ENOTSUPP;
|
||
}
|
||
|
||
grf = ERR_PTR(-ENODEV);
|
||
if (np->parent)
|
||
grf = syscon_node_to_regmap(np->parent);
|
||
if (IS_ERR(grf))
|
||
grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
|
||
if (IS_ERR(grf)) {
|
||
pr_err("%s: Missing rockchip,grf property, %lu\n",
|
||
__func__, PTR_ERR(grf));
|
||
return PTR_ERR(grf);
|
||
}
|
||
|
||
ret = data->init_usb_uart(grf);
|
||
if (ret) {
|
||
pr_err("%s: could not init usb_uart, %d\n", __func__, ret);
|
||
enable_usb_uart = 0;
|
||
return ret;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
early_initcall(rockchip_init_usb_uart);
|
||
|
||
static int __init rockchip_usb_uart(char *buf)
|
||
{
|
||
enable_usb_uart = true;
|
||
return 0;
|
||
}
|
||
early_param("rockchip.usb_uart", rockchip_usb_uart);
|
||
#endif
|
||
|
||
MODULE_AUTHOR("Yunzhi Li <lyz@rock-chips.com>");
|
||
MODULE_DESCRIPTION("Rockchip USB 2.0 PHY driver");
|
||
MODULE_LICENSE("GPL v2");
|