mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 14:38:02 +07:00
65880ab160
In order for am335x and am437x to properly enter deeper c-states in cpuidle they must always call into the sleep33/43xx suspend code and also sometimes invoke the wkup_m3_ipc driver. These are both controlled by the pm33xx module so we must provide a method for the platform code to call back into the module when it is available as the core cpuidle ops that are invoked by the cpuidle-arm driver must remain as built in. Extend the init platform op to take an idle function as an argument so that we can use this to call into the pm33xx module for c-states that need it. Also add a deinit op so we can unregister this idle function from the PM core when the pm33xx module gets unloaded. Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
429 lines
9.4 KiB
C
429 lines
9.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* AM33XX Arch Power Management Routines
|
|
*
|
|
* Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
|
|
* Dave Gerlach
|
|
*/
|
|
|
|
#include <linux/cpuidle.h>
|
|
#include <linux/platform_data/pm33xx.h>
|
|
#include <asm/cpuidle.h>
|
|
#include <asm/smp_scu.h>
|
|
#include <asm/suspend.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/platform_data/gpio-omap.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/wkup_m3_ipc.h>
|
|
#include <linux/of.h>
|
|
#include <linux/rtc.h>
|
|
|
|
#include "cm33xx.h"
|
|
#include "common.h"
|
|
#include "control.h"
|
|
#include "clockdomain.h"
|
|
#include "iomap.h"
|
|
#include "omap_hwmod.h"
|
|
#include "pm.h"
|
|
#include "powerdomain.h"
|
|
#include "prm33xx.h"
|
|
#include "soc.h"
|
|
#include "sram.h"
|
|
#include "omap-secure.h"
|
|
|
|
static struct powerdomain *cefuse_pwrdm, *gfx_pwrdm, *per_pwrdm, *mpu_pwrdm;
|
|
static struct clockdomain *gfx_l4ls_clkdm;
|
|
static void __iomem *scu_base;
|
|
static struct omap_hwmod *rtc_oh;
|
|
|
|
static int (*idle_fn)(u32 wfi_flags);
|
|
|
|
struct amx3_idle_state {
|
|
int wfi_flags;
|
|
};
|
|
|
|
static struct amx3_idle_state *idle_states;
|
|
|
|
static int am43xx_map_scu(void)
|
|
{
|
|
scu_base = ioremap(scu_a9_get_base(), SZ_256);
|
|
|
|
if (!scu_base)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int am33xx_check_off_mode_enable(void)
|
|
{
|
|
if (enable_off_mode)
|
|
pr_warn("WARNING: This platform does not support off-mode, entering DeepSleep suspend.\n");
|
|
|
|
/* off mode not supported on am335x so return 0 always */
|
|
return 0;
|
|
}
|
|
|
|
static int am43xx_check_off_mode_enable(void)
|
|
{
|
|
/*
|
|
* Check for am437x-gp-evm which has the right Hardware design to
|
|
* support this mode reliably.
|
|
*/
|
|
if (of_machine_is_compatible("ti,am437x-gp-evm") && enable_off_mode)
|
|
return enable_off_mode;
|
|
else if (enable_off_mode)
|
|
pr_warn("WARNING: This platform does not support off-mode, entering DeepSleep suspend.\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amx3_common_init(int (*idle)(u32 wfi_flags))
|
|
{
|
|
gfx_pwrdm = pwrdm_lookup("gfx_pwrdm");
|
|
per_pwrdm = pwrdm_lookup("per_pwrdm");
|
|
mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
|
|
|
|
if ((!gfx_pwrdm) || (!per_pwrdm) || (!mpu_pwrdm))
|
|
return -ENODEV;
|
|
|
|
(void)clkdm_for_each(omap_pm_clkdms_setup, NULL);
|
|
|
|
/* CEFUSE domain can be turned off post bootup */
|
|
cefuse_pwrdm = pwrdm_lookup("cefuse_pwrdm");
|
|
if (!cefuse_pwrdm)
|
|
pr_err("PM: Failed to get cefuse_pwrdm\n");
|
|
else if (omap_type() != OMAP2_DEVICE_TYPE_GP)
|
|
pr_info("PM: Leaving EFUSE power domain active\n");
|
|
else
|
|
omap_set_pwrdm_state(cefuse_pwrdm, PWRDM_POWER_OFF);
|
|
|
|
idle_fn = idle;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int am33xx_suspend_init(int (*idle)(u32 wfi_flags))
|
|
{
|
|
int ret;
|
|
|
|
gfx_l4ls_clkdm = clkdm_lookup("gfx_l4ls_gfx_clkdm");
|
|
|
|
if (!gfx_l4ls_clkdm) {
|
|
pr_err("PM: Cannot lookup gfx_l4ls_clkdm clockdomains\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = amx3_common_init(idle);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int am43xx_suspend_init(int (*idle)(u32 wfi_flags))
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = am43xx_map_scu();
|
|
if (ret) {
|
|
pr_err("PM: Could not ioremap SCU\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = amx3_common_init(idle);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int amx3_suspend_deinit(void)
|
|
{
|
|
idle_fn = NULL;
|
|
return 0;
|
|
}
|
|
|
|
static void amx3_pre_suspend_common(void)
|
|
{
|
|
omap_set_pwrdm_state(gfx_pwrdm, PWRDM_POWER_OFF);
|
|
}
|
|
|
|
static void amx3_post_suspend_common(void)
|
|
{
|
|
int status;
|
|
/*
|
|
* Because gfx_pwrdm is the only one under MPU control,
|
|
* comment on transition status
|
|
*/
|
|
status = pwrdm_read_pwrst(gfx_pwrdm);
|
|
if (status != PWRDM_POWER_OFF)
|
|
pr_err("PM: GFX domain did not transition: %x\n", status);
|
|
}
|
|
|
|
static int am33xx_suspend(unsigned int state, int (*fn)(unsigned long),
|
|
unsigned long args)
|
|
{
|
|
int ret = 0;
|
|
|
|
amx3_pre_suspend_common();
|
|
ret = cpu_suspend(args, fn);
|
|
amx3_post_suspend_common();
|
|
|
|
/*
|
|
* BUG: GFX_L4LS clock domain needs to be woken up to
|
|
* ensure thet L4LS clock domain does not get stuck in
|
|
* transition. If that happens L3 module does not get
|
|
* disabled, thereby leading to PER power domain
|
|
* transition failing
|
|
*/
|
|
|
|
clkdm_wakeup(gfx_l4ls_clkdm);
|
|
clkdm_sleep(gfx_l4ls_clkdm);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long),
|
|
unsigned long args)
|
|
{
|
|
int ret = 0;
|
|
|
|
/* Suspend secure side on HS devices */
|
|
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
|
|
if (optee_available)
|
|
omap_smccc_smc(AM43xx_PPA_SVC_PM_SUSPEND, 0);
|
|
else
|
|
omap_secure_dispatcher(AM43xx_PPA_SVC_PM_SUSPEND,
|
|
FLAG_START_CRITICAL,
|
|
0, 0, 0, 0, 0);
|
|
}
|
|
|
|
amx3_pre_suspend_common();
|
|
scu_power_mode(scu_base, SCU_PM_POWEROFF);
|
|
ret = cpu_suspend(args, fn);
|
|
scu_power_mode(scu_base, SCU_PM_NORMAL);
|
|
|
|
if (!am43xx_check_off_mode_enable())
|
|
amx3_post_suspend_common();
|
|
|
|
/*
|
|
* Resume secure side on HS devices.
|
|
*
|
|
* Note that even on systems with OP-TEE available this resume call is
|
|
* issued to the ROM. This is because upon waking from suspend the ROM
|
|
* is restored as the secure monitor. On systems with OP-TEE ROM will
|
|
* restore OP-TEE during this call.
|
|
*/
|
|
if (omap_type() != OMAP2_DEVICE_TYPE_GP)
|
|
omap_secure_dispatcher(AM43xx_PPA_SVC_PM_RESUME,
|
|
FLAG_START_CRITICAL,
|
|
0, 0, 0, 0, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int am33xx_cpu_suspend(int (*fn)(unsigned long), unsigned long args)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (omap_irq_pending() || need_resched())
|
|
return ret;
|
|
|
|
ret = cpu_suspend(args, fn);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int am43xx_cpu_suspend(int (*fn)(unsigned long), unsigned long args)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (!scu_base)
|
|
return 0;
|
|
|
|
scu_power_mode(scu_base, SCU_PM_DORMANT);
|
|
ret = cpu_suspend(args, fn);
|
|
scu_power_mode(scu_base, SCU_PM_NORMAL);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void amx3_begin_suspend(void)
|
|
{
|
|
cpu_idle_poll_ctrl(true);
|
|
}
|
|
|
|
static void amx3_finish_suspend(void)
|
|
{
|
|
cpu_idle_poll_ctrl(false);
|
|
}
|
|
|
|
|
|
static struct am33xx_pm_sram_addr *amx3_get_sram_addrs(void)
|
|
{
|
|
if (soc_is_am33xx())
|
|
return &am33xx_pm_sram;
|
|
else if (soc_is_am437x())
|
|
return &am43xx_pm_sram;
|
|
else
|
|
return NULL;
|
|
}
|
|
|
|
void __iomem *am43xx_get_rtc_base_addr(void)
|
|
{
|
|
rtc_oh = omap_hwmod_lookup("rtc");
|
|
|
|
return omap_hwmod_get_mpu_rt_va(rtc_oh);
|
|
}
|
|
|
|
static void am43xx_save_context(void)
|
|
{
|
|
}
|
|
|
|
static void am33xx_save_context(void)
|
|
{
|
|
omap_intc_save_context();
|
|
}
|
|
|
|
static void am33xx_restore_context(void)
|
|
{
|
|
omap_intc_restore_context();
|
|
}
|
|
|
|
static void am43xx_restore_context(void)
|
|
{
|
|
/*
|
|
* HACK: restore dpll_per_clkdcoldo register contents, to avoid
|
|
* breaking suspend-resume
|
|
*/
|
|
writel_relaxed(0x0, AM33XX_L4_WK_IO_ADDRESS(0x44df2e14));
|
|
}
|
|
|
|
static void am43xx_prepare_rtc_suspend(void)
|
|
{
|
|
omap_hwmod_enable(rtc_oh);
|
|
}
|
|
|
|
static void am43xx_prepare_rtc_resume(void)
|
|
{
|
|
omap_hwmod_idle(rtc_oh);
|
|
}
|
|
|
|
static struct am33xx_pm_platform_data am33xx_ops = {
|
|
.init = am33xx_suspend_init,
|
|
.deinit = amx3_suspend_deinit,
|
|
.soc_suspend = am33xx_suspend,
|
|
.cpu_suspend = am33xx_cpu_suspend,
|
|
.begin_suspend = amx3_begin_suspend,
|
|
.finish_suspend = amx3_finish_suspend,
|
|
.get_sram_addrs = amx3_get_sram_addrs,
|
|
.save_context = am33xx_save_context,
|
|
.restore_context = am33xx_restore_context,
|
|
.prepare_rtc_suspend = am43xx_prepare_rtc_suspend,
|
|
.prepare_rtc_resume = am43xx_prepare_rtc_resume,
|
|
.check_off_mode_enable = am33xx_check_off_mode_enable,
|
|
.get_rtc_base_addr = am43xx_get_rtc_base_addr,
|
|
};
|
|
|
|
static struct am33xx_pm_platform_data am43xx_ops = {
|
|
.init = am43xx_suspend_init,
|
|
.deinit = amx3_suspend_deinit,
|
|
.soc_suspend = am43xx_suspend,
|
|
.cpu_suspend = am43xx_cpu_suspend,
|
|
.begin_suspend = amx3_begin_suspend,
|
|
.finish_suspend = amx3_finish_suspend,
|
|
.get_sram_addrs = amx3_get_sram_addrs,
|
|
.save_context = am43xx_save_context,
|
|
.restore_context = am43xx_restore_context,
|
|
.prepare_rtc_suspend = am43xx_prepare_rtc_suspend,
|
|
.prepare_rtc_resume = am43xx_prepare_rtc_resume,
|
|
.check_off_mode_enable = am43xx_check_off_mode_enable,
|
|
.get_rtc_base_addr = am43xx_get_rtc_base_addr,
|
|
};
|
|
|
|
static struct am33xx_pm_platform_data *am33xx_pm_get_pdata(void)
|
|
{
|
|
if (soc_is_am33xx())
|
|
return &am33xx_ops;
|
|
else if (soc_is_am437x())
|
|
return &am43xx_ops;
|
|
else
|
|
return NULL;
|
|
}
|
|
|
|
int __init amx3_common_pm_init(void)
|
|
{
|
|
struct am33xx_pm_platform_data *pdata;
|
|
struct platform_device_info devinfo;
|
|
|
|
pdata = am33xx_pm_get_pdata();
|
|
|
|
memset(&devinfo, 0, sizeof(devinfo));
|
|
devinfo.name = "pm33xx";
|
|
devinfo.data = pdata;
|
|
devinfo.size_data = sizeof(*pdata);
|
|
devinfo.id = -1;
|
|
platform_device_register_full(&devinfo);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init amx3_idle_init(struct device_node *cpu_node, int cpu)
|
|
{
|
|
struct device_node *state_node;
|
|
struct amx3_idle_state states[CPUIDLE_STATE_MAX];
|
|
int i;
|
|
int state_count = 1;
|
|
|
|
for (i = 0; ; i++) {
|
|
state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
|
|
if (!state_node)
|
|
break;
|
|
|
|
if (!of_device_is_available(state_node))
|
|
continue;
|
|
|
|
if (i == CPUIDLE_STATE_MAX) {
|
|
pr_warn("%s: cpuidle states reached max possible\n",
|
|
__func__);
|
|
break;
|
|
}
|
|
|
|
states[state_count].wfi_flags = 0;
|
|
|
|
if (of_property_read_bool(state_node, "ti,idle-wkup-m3"))
|
|
states[state_count].wfi_flags |= WFI_FLAG_WAKE_M3 |
|
|
WFI_FLAG_FLUSH_CACHE;
|
|
|
|
state_count++;
|
|
}
|
|
|
|
idle_states = kcalloc(state_count, sizeof(*idle_states), GFP_KERNEL);
|
|
if (!idle_states)
|
|
return -ENOMEM;
|
|
|
|
for (i = 1; i < state_count; i++)
|
|
idle_states[i].wfi_flags = states[i].wfi_flags;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amx3_idle_enter(unsigned long index)
|
|
{
|
|
struct amx3_idle_state *idle_state = &idle_states[index];
|
|
|
|
if (!idle_state)
|
|
return -EINVAL;
|
|
|
|
if (idle_fn)
|
|
idle_fn(idle_state->wfi_flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct cpuidle_ops amx3_cpuidle_ops __initdata = {
|
|
.init = amx3_idle_init,
|
|
.suspend = amx3_idle_enter,
|
|
};
|
|
|
|
CPUIDLE_METHOD_OF_DECLARE(pm33xx_idle, "ti,am3352", &amx3_cpuidle_ops);
|
|
CPUIDLE_METHOD_OF_DECLARE(pm43xx_idle, "ti,am4372", &amx3_cpuidle_ops);
|