linux_dsm_epyc7002/drivers/video/intelfb/intelfbhw.h
Krzysztof Helt cfbd646fe0 intelfb: fix setting of active pipe with LVDS displays
The intelfb driver sets color map depending on currently active pipe.
However, if an LVDS display is attached (like in laptop) the active pipe
variable is never set.  The default value is PIPE_A and can be wrong.  Set
up the pipe variable during driver initialization after hardware state was
read.

Also, the detection of the active display (and hence the pipe) is wrong.
The pipes are assigned to so called planes.  Both pipes are always enabled
on my laptop but only one plane is enabled (the plane A for the CRT or the
plane B for the LVDS).  Change active pipe detection code to take into
account a status of the plane assigned to each pipe.

The problem is visible in the 8 bpp mode if colors above 15 are used.  The
first 16 color entries are displayed correctly.

The graphics chip description is here (G45 vol. 3):
http://intellinuxgraphics.org/documentation.html

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13285

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Michal Suchanek <hramrach@centrum.cz>
Cc: Dean Menezes <samanddeanus@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 07:20:05 -08:00

610 lines
19 KiB
C

#ifndef _INTELFBHW_H
#define _INTELFBHW_H
/* $DHD: intelfb/intelfbhw.h,v 1.5 2003/06/27 15:06:25 dawes Exp $ */
/*** HW-specific data ***/
/* Information about the 852GM/855GM variants */
#define INTEL_85X_CAPID 0x44
#define INTEL_85X_VARIANT_MASK 0x7
#define INTEL_85X_VARIANT_SHIFT 5
#define INTEL_VAR_855GME 0x0
#define INTEL_VAR_855GM 0x4
#define INTEL_VAR_852GME 0x2
#define INTEL_VAR_852GM 0x5
/* Information about DVO/LVDS Ports */
#define DVOA_PORT 0x1
#define DVOB_PORT 0x2
#define DVOC_PORT 0x4
#define LVDS_PORT 0x8
/*
* The Bridge device's PCI config space has information about the
* fb aperture size and the amount of pre-reserved memory.
*/
#define INTEL_GMCH_CTRL 0x52
#define INTEL_GMCH_ENABLED 0x4
#define INTEL_GMCH_MEM_MASK 0x1
#define INTEL_GMCH_MEM_64M 0x1
#define INTEL_GMCH_MEM_128M 0
#define INTEL_830_GMCH_GMS_MASK (0x7 << 4)
#define INTEL_830_GMCH_GMS_DISABLED (0x0 << 4)
#define INTEL_830_GMCH_GMS_LOCAL (0x1 << 4)
#define INTEL_830_GMCH_GMS_STOLEN_512 (0x2 << 4)
#define INTEL_830_GMCH_GMS_STOLEN_1024 (0x3 << 4)
#define INTEL_830_GMCH_GMS_STOLEN_8192 (0x4 << 4)
#define INTEL_855_GMCH_GMS_MASK (0x7 << 4)
#define INTEL_855_GMCH_GMS_DISABLED (0x0 << 4)
#define INTEL_855_GMCH_GMS_STOLEN_1M (0x1 << 4)
#define INTEL_855_GMCH_GMS_STOLEN_4M (0x2 << 4)
#define INTEL_855_GMCH_GMS_STOLEN_8M (0x3 << 4)
#define INTEL_855_GMCH_GMS_STOLEN_16M (0x4 << 4)
#define INTEL_855_GMCH_GMS_STOLEN_32M (0x5 << 4)
#define INTEL_915G_GMCH_GMS_STOLEN_48M (0x6 << 4)
#define INTEL_915G_GMCH_GMS_STOLEN_64M (0x7 << 4)
/* HW registers */
/* Fence registers */
#define FENCE 0x2000
#define FENCE_NUM 8
/* Primary ring buffer */
#define PRI_RING_TAIL 0x2030
#define RING_TAIL_MASK 0x001ffff8
#define RING_INUSE 0x1
#define PRI_RING_HEAD 0x2034
#define RING_HEAD_WRAP_MASK 0x7ff
#define RING_HEAD_WRAP_SHIFT 21
#define RING_HEAD_MASK 0x001ffffc
#define PRI_RING_START 0x2038
#define RING_START_MASK 0xfffff000
#define PRI_RING_LENGTH 0x203c
#define RING_LENGTH_MASK 0x001ff000
#define RING_REPORT_MASK (0x3 << 1)
#define RING_NO_REPORT (0x0 << 1)
#define RING_REPORT_64K (0x1 << 1)
#define RING_REPORT_4K (0x2 << 1)
#define RING_REPORT_128K (0x3 << 1)
#define RING_ENABLE 0x1
/*
* Tail can't wrap to any closer than RING_MIN_FREE bytes of the head,
* and the last RING_MIN_FREE bytes need to be padded with MI_NOOP
*/
#define RING_MIN_FREE 64
#define IPEHR 0x2088
#define INSTDONE 0x2090
#define PRI_RING_EMPTY 1
#define HWSTAM 0x2098
#define IER 0x20A0
#define IIR 0x20A4
#define IMR 0x20A8
#define VSYNC_PIPE_A_INTERRUPT (1 << 7)
#define PIPE_A_EVENT_INTERRUPT (1 << 6)
#define VSYNC_PIPE_B_INTERRUPT (1 << 5)
#define PIPE_B_EVENT_INTERRUPT (1 << 4)
#define HOST_PORT_EVENT_INTERRUPT (1 << 3)
#define CAPTURE_EVENT_INTERRUPT (1 << 2)
#define USER_DEFINED_INTERRUPT (1 << 1)
#define BREAKPOINT_INTERRUPT 1
#define INSTPM 0x20c0
#define SYNC_FLUSH_ENABLE (1 << 5)
#define INSTPS 0x20c4
#define MEM_MODE 0x20cc
#define MASK_SHIFT 16
#define FW_BLC_0 0x20d8
#define FW_DISPA_WM_SHIFT 0
#define FW_DISPA_WM_MASK 0x3f
#define FW_DISPA_BL_SHIFT 8
#define FW_DISPA_BL_MASK 0xf
#define FW_DISPB_WM_SHIFT 16
#define FW_DISPB_WM_MASK 0x1f
#define FW_DISPB_BL_SHIFT 24
#define FW_DISPB_BL_MASK 0x7
#define FW_BLC_1 0x20dc
#define FW_DISPC_WM_SHIFT 0
#define FW_DISPC_WM_MASK 0x1f
#define FW_DISPC_BL_SHIFT 8
#define FW_DISPC_BL_MASK 0x7
#define GPIOA 0x5010
#define GPIOB 0x5014
#define GPIOC 0x5018 /* this may be external DDC on i830 */
#define GPIOD 0x501C /* this is DVO DDC */
#define GPIOE 0x5020 /* this is DVO i2C */
#define GPIOF 0x5024
/* PLL registers */
#define VGA0_DIVISOR 0x06000
#define VGA1_DIVISOR 0x06004
#define VGAPD 0x06010
#define VGAPD_0_P1_SHIFT 0
#define VGAPD_0_P1_FORCE_DIV2 (1 << 5)
#define VGAPD_0_P2_SHIFT 7
#define VGAPD_1_P1_SHIFT 8
#define VGAPD_1_P1_FORCE_DIV2 (1 << 13)
#define VGAPD_1_P2_SHIFT 15
#define DPLL_A 0x06014
#define DPLL_B 0x06018
#define DPLL_VCO_ENABLE (1 << 31)
#define DPLL_2X_CLOCK_ENABLE (1 << 30)
#define DPLL_SYNCLOCK_ENABLE (1 << 29)
#define DPLL_VGA_MODE_DISABLE (1 << 28)
#define DPLL_P2_MASK 1
#define DPLL_P2_SHIFT 23
#define DPLL_I9XX_P2_SHIFT 24
#define DPLL_P1_FORCE_DIV2 (1 << 21)
#define DPLL_P1_MASK 0x1f
#define DPLL_P1_SHIFT 16
#define DPLL_REFERENCE_SELECT_MASK (0x3 << 13)
#define DPLL_REFERENCE_DEFAULT (0x0 << 13)
#define DPLL_REFERENCE_TVCLK (0x2 << 13)
#define DPLL_RATE_SELECT_MASK (1 << 8)
#define DPLL_RATE_SELECT_FP0 (0 << 8)
#define DPLL_RATE_SELECT_FP1 (1 << 8)
#define FPA0 0x06040
#define FPA1 0x06044
#define FPB0 0x06048
#define FPB1 0x0604c
#define FP_DIVISOR_MASK 0x3f
#define FP_N_DIVISOR_SHIFT 16
#define FP_M1_DIVISOR_SHIFT 8
#define FP_M2_DIVISOR_SHIFT 0
/* PLL parameters (these are for 852GM/855GM/865G, check earlier chips). */
/* Clock values are in units of kHz */
#define PLL_REFCLK 48000
#define MIN_CLOCK 25000
#define MAX_CLOCK 350000
/* Two pipes */
#define PIPE_A 0
#define PIPE_B 1
#define PIPE_MASK 1
/* palette registers */
#define PALETTE_A 0x0a000
#define PALETTE_B 0x0a800
#ifndef PALETTE_8_ENTRIES
#define PALETTE_8_ENTRIES 256
#endif
#define PALETTE_8_SIZE (PALETTE_8_ENTRIES * 4)
#define PALETTE_10_ENTRIES 128
#define PALETTE_10_SIZE (PALETTE_10_ENTRIES * 8)
#define PALETTE_8_MASK 0xff
#define PALETTE_8_RED_SHIFT 16
#define PALETTE_8_GREEN_SHIFT 8
#define PALETTE_8_BLUE_SHIFT 0
/* CRTC registers */
#define HTOTAL_A 0x60000
#define HBLANK_A 0x60004
#define HSYNC_A 0x60008
#define VTOTAL_A 0x6000c
#define VBLANK_A 0x60010
#define VSYNC_A 0x60014
#define SRC_SIZE_A 0x6001c
#define BCLRPAT_A 0x60020
#define HTOTAL_B 0x61000
#define HBLANK_B 0x61004
#define HSYNC_B 0x61008
#define VTOTAL_B 0x6100c
#define VBLANK_B 0x61010
#define VSYNC_B 0x61014
#define SRC_SIZE_B 0x6101c
#define BCLRPAT_B 0x61020
#define HTOTAL_MASK 0xfff
#define HTOTAL_SHIFT 16
#define HACTIVE_MASK 0x7ff
#define HACTIVE_SHIFT 0
#define HBLANKEND_MASK 0xfff
#define HBLANKEND_SHIFT 16
#define HBLANKSTART_MASK 0xfff
#define HBLANKSTART_SHIFT 0
#define HSYNCEND_MASK 0xfff
#define HSYNCEND_SHIFT 16
#define HSYNCSTART_MASK 0xfff
#define HSYNCSTART_SHIFT 0
#define VTOTAL_MASK 0xfff
#define VTOTAL_SHIFT 16
#define VACTIVE_MASK 0x7ff
#define VACTIVE_SHIFT 0
#define VBLANKEND_MASK 0xfff
#define VBLANKEND_SHIFT 16
#define VBLANKSTART_MASK 0xfff
#define VBLANKSTART_SHIFT 0
#define VSYNCEND_MASK 0xfff
#define VSYNCEND_SHIFT 16
#define VSYNCSTART_MASK 0xfff
#define VSYNCSTART_SHIFT 0
#define SRC_SIZE_HORIZ_MASK 0x7ff
#define SRC_SIZE_HORIZ_SHIFT 16
#define SRC_SIZE_VERT_MASK 0x7ff
#define SRC_SIZE_VERT_SHIFT 0
#define ADPA 0x61100
#define ADPA_DAC_ENABLE (1 << 31)
#define ADPA_DAC_DISABLE 0
#define ADPA_PIPE_SELECT_SHIFT 30
#define ADPA_USE_VGA_HVPOLARITY (1 << 15)
#define ADPA_SETS_HVPOLARITY 0
#define ADPA_DPMS_CONTROL_MASK (0x3 << 10)
#define ADPA_DPMS_D0 (0x0 << 10)
#define ADPA_DPMS_D2 (0x1 << 10)
#define ADPA_DPMS_D1 (0x2 << 10)
#define ADPA_DPMS_D3 (0x3 << 10)
#define ADPA_VSYNC_ACTIVE_SHIFT 4
#define ADPA_HSYNC_ACTIVE_SHIFT 3
#define ADPA_SYNC_ACTIVE_MASK 1
#define ADPA_SYNC_ACTIVE_HIGH 1
#define ADPA_SYNC_ACTIVE_LOW 0
#define DVOA 0x61120
#define DVOB 0x61140
#define DVOC 0x61160
#define LVDS 0x61180
#define PORT_ENABLE (1 << 31)
#define PORT_PIPE_SELECT_SHIFT 30
#define PORT_TV_FLAGS_MASK 0xFF
#define PORT_TV_FLAGS 0xC4 /* ripped from my BIOS
to understand and correct */
#define DVOA_SRCDIM 0x61124
#define DVOB_SRCDIM 0x61144
#define DVOC_SRCDIM 0x61164
#define PIPEA_DSL 0x70000
#define PIPEB_DSL 0x71000
#define PIPEACONF 0x70008
#define PIPEBCONF 0x71008
#define PIPEASTAT 0x70024 /* bits 0-15 are "write 1 to clear" */
#define PIPEBSTAT 0x71024
#define PIPECONF_ENABLE (1 << 31)
#define PIPECONF_DISABLE 0
#define PIPECONF_DOUBLE_WIDE (1 << 30)
#define PIPECONF_SINGLE_WIDE 0
#define PIPECONF_LOCKED (1 << 25)
#define PIPECONF_UNLOCKED 0
#define PIPECONF_GAMMA (1 << 24)
#define PIPECONF_PALETTE 0
#define PIPECONF_PROGRESSIVE (0 << 21)
#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21)
#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21)
#define PIPECONF_INTERLACE_MASK (7 << 21)
/* enable bits, write 1 to enable */
#define PIPESTAT_FIFO_UNDERRUN (1 << 31)
#define PIPESTAT_CRC_ERROR_EN (1 << 29)
#define PIPESTAT_CRC_DONE_EN (1 << 28)
#define PIPESTAT_HOTPLUG_EN (1 << 26)
#define PIPESTAT_VERTICAL_SYNC_EN (1 << 25)
#define PIPESTAT_DISPLINE_COMP_EN (1 << 24)
#define PIPESTAT_FLD_EVT_ODD_EN (1 << 21)
#define PIPESTAT_FLD_EVT_EVEN_EN (1 << 20)
#define PIPESTAT_TV_HOTPLUG_EN (1 << 18)
#define PIPESTAT_VBLANK_EN (1 << 17)
#define PIPESTAT_OVL_UPDATE_EN (1 << 16)
/* status bits, write 1 to clear */
#define PIPESTAT_HOTPLUG_STATE (1 << 15)
#define PIPESTAT_CRC_ERROR (1 << 13)
#define PIPESTAT_CRC_DONE (1 << 12)
#define PIPESTAT_HOTPLUG (1 << 10)
#define PIPESTAT_VSYNC (1 << 9)
#define PIPESTAT_DISPLINE_COMP (1 << 8)
#define PIPESTAT_FLD_EVT_ODD (1 << 5)
#define PIPESTAT_FLD_EVT_EVEN (1 << 4)
#define PIPESTAT_TV_HOTPLUG (1 << 2)
#define PIPESTAT_VBLANK (1 << 1)
#define PIPESTAT_OVL_UPDATE (1 << 0)
#define DISPARB 0x70030
#define DISPARB_AEND_MASK 0x1ff
#define DISPARB_AEND_SHIFT 0
#define DISPARB_BEND_MASK 0x3ff
#define DISPARB_BEND_SHIFT 9
/* Desktop HW cursor */
#define CURSOR_CONTROL 0x70080
#define CURSOR_ENABLE (1 << 31)
#define CURSOR_GAMMA_ENABLE (1 << 30)
#define CURSOR_STRIDE_MASK (0x3 << 28)
#define CURSOR_STRIDE_256 (0x0 << 28)
#define CURSOR_STRIDE_512 (0x1 << 28)
#define CURSOR_STRIDE_1K (0x2 << 28)
#define CURSOR_STRIDE_2K (0x3 << 28)
#define CURSOR_FORMAT_MASK (0x7 << 24)
#define CURSOR_FORMAT_2C (0x0 << 24)
#define CURSOR_FORMAT_3C (0x1 << 24)
#define CURSOR_FORMAT_4C (0x2 << 24)
#define CURSOR_FORMAT_ARGB (0x4 << 24)
#define CURSOR_FORMAT_XRGB (0x5 << 24)
/* Mobile HW cursor (and i810) */
#define CURSOR_A_CONTROL CURSOR_CONTROL
#define CURSOR_B_CONTROL 0x700c0
#define CURSOR_MODE_MASK 0x27
#define CURSOR_MODE_DISABLE 0
#define CURSOR_MODE_64_3C 0x04
#define CURSOR_MODE_64_4C_AX 0x05
#define CURSOR_MODE_64_4C 0x06
#define CURSOR_MODE_64_32B_AX 0x07
#define CURSOR_MODE_64_ARGB_AX 0x27
#define CURSOR_PIPE_SELECT_SHIFT 28
#define CURSOR_MOBILE_GAMMA_ENABLE (1 << 26)
#define CURSOR_MEM_TYPE_LOCAL (1 << 25)
/* All platforms (desktop has no pipe B) */
#define CURSOR_A_BASEADDR 0x70084
#define CURSOR_B_BASEADDR 0x700c4
#define CURSOR_BASE_MASK 0xffffff00
#define CURSOR_A_POSITION 0x70088
#define CURSOR_B_POSITION 0x700c8
#define CURSOR_POS_SIGN (1 << 15)
#define CURSOR_POS_MASK 0x7ff
#define CURSOR_X_SHIFT 0
#define CURSOR_Y_SHIFT 16
#define CURSOR_A_PALETTE0 0x70090
#define CURSOR_A_PALETTE1 0x70094
#define CURSOR_A_PALETTE2 0x70098
#define CURSOR_A_PALETTE3 0x7009c
#define CURSOR_B_PALETTE0 0x700d0
#define CURSOR_B_PALETTE1 0x700d4
#define CURSOR_B_PALETTE2 0x700d8
#define CURSOR_B_PALETTE3 0x700dc
#define CURSOR_COLOR_MASK 0xff
#define CURSOR_RED_SHIFT 16
#define CURSOR_GREEN_SHIFT 8
#define CURSOR_BLUE_SHIFT 0
#define CURSOR_PALETTE_MASK 0xffffff
/* Desktop only */
#define CURSOR_SIZE 0x700a0
#define CURSOR_SIZE_MASK 0x3ff
#define CURSOR_SIZE_H_SHIFT 0
#define CURSOR_SIZE_V_SHIFT 12
#define DSPACNTR 0x70180
#define DSPBCNTR 0x71180
#define DISPPLANE_PLANE_ENABLE (1 << 31)
#define DISPPLANE_PLANE_DISABLE 0
#define DISPPLANE_GAMMA_ENABLE (1<<30)
#define DISPPLANE_GAMMA_DISABLE 0
#define DISPPLANE_PIXFORMAT_MASK (0xf<<26)
#define DISPPLANE_8BPP (0x2<<26)
#define DISPPLANE_15_16BPP (0x4<<26)
#define DISPPLANE_16BPP (0x5<<26)
#define DISPPLANE_32BPP_NO_ALPHA (0x6<<26)
#define DISPPLANE_32BPP (0x7<<26)
#define DISPPLANE_STEREO_ENABLE (1<<25)
#define DISPPLANE_STEREO_DISABLE 0
#define DISPPLANE_SEL_PIPE_SHIFT 24
#define DISPPLANE_SRC_KEY_ENABLE (1<<22)
#define DISPPLANE_SRC_KEY_DISABLE 0
#define DISPPLANE_LINE_DOUBLE (1<<20)
#define DISPPLANE_NO_LINE_DOUBLE 0
#define DISPPLANE_STEREO_POLARITY_FIRST 0
#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18)
/* plane B only */
#define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15)
#define DISPPLANE_ALPHA_TRANS_DISABLE 0
#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0
#define DISPPLANE_SPRITE_ABOVE_OVERLAY 1
#define DSPABASE 0x70184
#define DSPASTRIDE 0x70188
#define DSPBBASE 0x71184
#define DSPBSTRIDE 0x71188
#define VGACNTRL 0x71400
#define VGA_DISABLE (1 << 31)
#define VGA_ENABLE 0
#define VGA_PIPE_SELECT_SHIFT 29
#define VGA_PALETTE_READ_SELECT 23
#define VGA_PALETTE_A_WRITE_DISABLE (1 << 22)
#define VGA_PALETTE_B_WRITE_DISABLE (1 << 21)
#define VGA_LEGACY_PALETTE (1 << 20)
#define VGA_6BIT_DAC 0
#define VGA_8BIT_DAC (1 << 20)
#define ADD_ID 0x71408
#define ADD_ID_MASK 0xff
/* BIOS scratch area registers (830M and 845G). */
#define SWF0 0x71410
#define SWF1 0x71414
#define SWF2 0x71418
#define SWF3 0x7141c
#define SWF4 0x71420
#define SWF5 0x71424
#define SWF6 0x71428
/* BIOS scratch area registers (852GM, 855GM, 865G). */
#define SWF00 0x70410
#define SWF01 0x70414
#define SWF02 0x70418
#define SWF03 0x7041c
#define SWF04 0x70420
#define SWF05 0x70424
#define SWF06 0x70428
#define SWF10 SWF0
#define SWF11 SWF1
#define SWF12 SWF2
#define SWF13 SWF3
#define SWF14 SWF4
#define SWF15 SWF5
#define SWF16 SWF6
#define SWF30 0x72414
#define SWF31 0x72418
#define SWF32 0x7241c
/* Memory Commands */
#define MI_NOOP (0x00 << 23)
#define MI_NOOP_WRITE_ID (1 << 22)
#define MI_NOOP_ID_MASK ((1 << 22) - 1)
#define MI_FLUSH (0x04 << 23)
#define MI_WRITE_DIRTY_STATE (1 << 4)
#define MI_END_SCENE (1 << 3)
#define MI_INHIBIT_RENDER_CACHE_FLUSH (1 << 2)
#define MI_INVALIDATE_MAP_CACHE (1 << 0)
#define MI_STORE_DWORD_IMM ((0x20 << 23) | 1)
/* 2D Commands */
#define COLOR_BLT_CMD ((2 << 29) | (0x40 << 22) | 3)
#define XY_COLOR_BLT_CMD ((2 << 29) | (0x50 << 22) | 4)
#define XY_SETUP_CLIP_BLT_CMD ((2 << 29) | (0x03 << 22) | 1)
#define XY_SRC_COPY_BLT_CMD ((2 << 29) | (0x53 << 22) | 6)
#define SRC_COPY_BLT_CMD ((2 << 29) | (0x43 << 22) | 4)
#define XY_MONO_PAT_BLT_CMD ((2 << 29) | (0x52 << 22) | 7)
#define XY_MONO_SRC_BLT_CMD ((2 << 29) | (0x54 << 22) | 6)
#define XY_MONO_SRC_IMM_BLT_CMD ((2 << 29) | (0x71 << 22) | 5)
#define TXT_IMM_BLT_CMD ((2 << 29) | (0x30 << 22) | 2)
#define SETUP_BLT_CMD ((2 << 29) | (0x00 << 22) | 6)
#define DW_LENGTH_MASK 0xff
#define WRITE_ALPHA (1 << 21)
#define WRITE_RGB (1 << 20)
#define VERT_SEED (3 << 8)
#define HORIZ_SEED (3 << 12)
#define COLOR_DEPTH_8 (0 << 24)
#define COLOR_DEPTH_16 (1 << 24)
#define COLOR_DEPTH_32 (3 << 24)
#define SRC_ROP_GXCOPY 0xcc
#define SRC_ROP_GXXOR 0x66
#define PAT_ROP_GXCOPY 0xf0
#define PAT_ROP_GXXOR 0x5a
#define PITCH_SHIFT 0
#define ROP_SHIFT 16
#define WIDTH_SHIFT 0
#define HEIGHT_SHIFT 16
/* in bytes */
#define MAX_MONO_IMM_SIZE 128
/*** Macros ***/
/* I/O macros */
#define INREG8(addr) readb((u8 __iomem *)(dinfo->mmio_base + (addr)))
#define INREG16(addr) readw((u16 __iomem *)(dinfo->mmio_base + (addr)))
#define INREG(addr) readl((u32 __iomem *)(dinfo->mmio_base + (addr)))
#define OUTREG8(addr, val) writeb((val),(u8 __iomem *)(dinfo->mmio_base + \
(addr)))
#define OUTREG16(addr, val) writew((val),(u16 __iomem *)(dinfo->mmio_base + \
(addr)))
#define OUTREG(addr, val) writel((val),(u32 __iomem *)(dinfo->mmio_base + \
(addr)))
/* Ring buffer macros */
#define OUT_RING(n) do { \
writel((n), (u32 __iomem *)(dinfo->ring.virtual + dinfo->ring_tail));\
dinfo->ring_tail += 4; \
dinfo->ring_tail &= dinfo->ring_tail_mask; \
} while (0)
#define START_RING(n) do { \
if (dinfo->ring_space < (n) * 4) \
wait_ring(dinfo,(n) * 4); \
dinfo->ring_space -= (n) * 4; \
} while (0)
#define ADVANCE_RING() do { \
OUTREG(PRI_RING_TAIL, dinfo->ring_tail); \
} while (0)
#define DO_RING_IDLE() do { \
u32 head, tail; \
do { \
head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK; \
tail = INREG(PRI_RING_TAIL) & RING_TAIL_MASK; \
udelay(10); \
} while (head != tail); \
} while (0)
/* function protoypes */
extern int intelfbhw_get_chipset(struct pci_dev *pdev, struct intelfb_info *dinfo);
extern int intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size,
int *stolen_size);
extern int intelfbhw_check_non_crt(struct intelfb_info *dinfo);
extern const char *intelfbhw_dvo_to_string(int dvo);
extern int intelfbhw_validate_mode(struct intelfb_info *dinfo,
struct fb_var_screeninfo *var);
extern int intelfbhw_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info);
extern void intelfbhw_do_blank(int blank, struct fb_info *info);
extern void intelfbhw_setcolreg(struct intelfb_info *dinfo, unsigned regno,
unsigned red, unsigned green, unsigned blue,
unsigned transp);
extern int intelfbhw_read_hw_state(struct intelfb_info *dinfo,
struct intelfb_hwstate *hw, int flag);
extern void intelfbhw_print_hw_state(struct intelfb_info *dinfo,
struct intelfb_hwstate *hw);
extern int intelfbhw_mode_to_hw(struct intelfb_info *dinfo,
struct intelfb_hwstate *hw,
struct fb_var_screeninfo *var);
extern int intelfbhw_program_mode(struct intelfb_info *dinfo,
const struct intelfb_hwstate *hw, int blank);
extern void intelfbhw_do_sync(struct intelfb_info *dinfo);
extern void intelfbhw_2d_stop(struct intelfb_info *dinfo);
extern void intelfbhw_2d_start(struct intelfb_info *dinfo);
extern void intelfbhw_do_fillrect(struct intelfb_info *dinfo, u32 x, u32 y,
u32 w, u32 h, u32 color, u32 pitch, u32 bpp,
u32 rop);
extern void intelfbhw_do_bitblt(struct intelfb_info *dinfo, u32 curx, u32 cury,
u32 dstx, u32 dsty, u32 w, u32 h, u32 pitch,
u32 bpp);
extern int intelfbhw_do_drawglyph(struct intelfb_info *dinfo, u32 fg, u32 bg,
u32 w, u32 h, const u8* cdat, u32 x, u32 y,
u32 pitch, u32 bpp);
extern void intelfbhw_cursor_init(struct intelfb_info *dinfo);
extern void intelfbhw_cursor_hide(struct intelfb_info *dinfo);
extern void intelfbhw_cursor_show(struct intelfb_info *dinfo);
extern void intelfbhw_cursor_setpos(struct intelfb_info *dinfo, int x, int y);
extern void intelfbhw_cursor_setcolor(struct intelfb_info *dinfo, u32 bg,
u32 fg);
extern void intelfbhw_cursor_load(struct intelfb_info *dinfo, int width,
int height, u8 *data);
extern void intelfbhw_cursor_reset(struct intelfb_info *dinfo);
extern int intelfbhw_enable_irq(struct intelfb_info *dinfo);
extern void intelfbhw_disable_irq(struct intelfb_info *dinfo);
extern int intelfbhw_wait_for_vsync(struct intelfb_info *dinfo, u32 pipe);
extern int intelfbhw_active_pipe(const struct intelfb_hwstate *hw);
#endif /* _INTELFBHW_H */