linux_dsm_epyc7002/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi
Harninder Rai 230dd6059a powerpc/fsl: Add PCI node in device tree of bsc9132qds
Signed-off-by: Harninder Rai <harninder.rai@freescale.com>
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-12-22 18:17:14 -06:00

214 lines
5.0 KiB
Plaintext

/*
* BSC9132 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&ifc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,ifc", "simple-bus";
/* FIXME: Test whether interrupts are split */
interrupts = <16 2 0 0 20 2 0 0>;
};
/* controller at 0xa000 */
&pci0 {
compatible = "fsl,bsc9132-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x2 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x1 0x2 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x2 0x2 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x3 0x2 0x0 0x0
>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,bsc9132-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,bsc9132-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <16 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,bsc9132-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <16 2 1 8>;
};
/include/ "pq3-i2c-0.dtsi"
i2c@3000 {
interrupts = <17 2 0 0>;
};
/include/ "pq3-i2c-1.dtsi"
i2c@3100 {
interrupts = <17 2 0 0>;
};
/include/ "pq3-duart-0.dtsi"
serial0: serial@4500 {
interrupts = <18 2 0 0>;
};
serial1: serial@4600 {
interrupts = <18 2 0 0 >;
};
/include/ "pq3-espi-0.dtsi"
spi0: spi@7000 {
fsl,espi-num-chipselects = <1>;
interrupts = <22 0x2 0 0>;
};
/include/ "pq3-gpio-0.dtsi"
gpio-controller@f000 {
interrupts = <19 0x2 0 0>;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,bsc9132-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2,256K
interrupts = <16 2 1 0>;
};
/include/ "pq3-dma-0.dtsi"
dma@21300 {
dma-channel@0 {
interrupts = <62 2 0 0>;
};
dma-channel@80 {
interrupts = <63 2 0 0>;
};
dma-channel@100 {
interrupts = <64 2 0 0>;
};
dma-channel@180 {
interrupts = <65 2 0 0>;
};
};
/include/ "pq3-usb2-dr-0.dtsi"
usb@22000 {
compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2";
interrupts = <40 0x2 0 0>;
};
/include/ "pq3-esdhc-0.dtsi"
sdhc@2e000 {
fsl,sdhci-auto-cmd12;
interrupts = <41 0x2 0 0>;
};
/include/ "pq3-sec4.4-0.dtsi"
crypto@30000 {
interrupts = <57 2 0 0>;
sec_jr0: jr@1000 {
interrupts = <58 2 0 0>;
};
sec_jr1: jr@2000 {
interrupts = <59 2 0 0>;
};
sec_jr2: jr@3000 {
interrupts = <60 2 0 0>;
};
sec_jr3: jr@4000 {
interrupts = <61 2 0 0>;
};
};
/include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi"
/include/ "pq3-etsec2-0.dtsi"
enet0: ethernet@b0000 {
queue-group@b0000 {
fsl,rx-bit-map = <0xff>;
fsl,tx-bit-map = <0xff>;
interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>;
};
};
/include/ "pq3-etsec2-1.dtsi"
enet1: ethernet@b1000 {
queue-group@b1000 {
fsl,rx-bit-map = <0xff>;
fsl,tx-bit-map = <0xff>;
interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>;
};
};
global-utilities@e0000 {
compatible = "fsl,bsc9132-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};