mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 08:16:49 +07:00
c2bcbe65fc
This fixes the GPIO API to be usable. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
215 lines
7.2 KiB
C
215 lines
7.2 KiB
C
/*
|
|
* Hardware-specific External Interface I/O core definitions
|
|
* for the BCM47xx family of SiliconBackplane-based chips.
|
|
*
|
|
* The External Interface core supports a total of three external chip selects
|
|
* supporting external interfaces. One of the external chip selects is
|
|
* used for Flash, one is used for PCMCIA, and the other may be
|
|
* programmed to support either a synchronous interface or an
|
|
* asynchronous interface. The asynchronous interface can be used to
|
|
* support external devices such as UARTs and the BCM2019 Bluetooth
|
|
* baseband processor.
|
|
* The external interface core also contains 2 on-chip 16550 UARTs, clock
|
|
* frequency control, a watchdog interrupt timer, and a GPIO interface.
|
|
*
|
|
* Copyright 2005, Broadcom Corporation
|
|
* Copyright 2006, Michael Buesch
|
|
*
|
|
* Licensed under the GPL version 2. See COPYING for details.
|
|
*/
|
|
#ifndef LINUX_SSB_EXTIFCORE_H_
|
|
#define LINUX_SSB_EXTIFCORE_H_
|
|
|
|
/* external interface address space */
|
|
#define SSB_EXTIF_PCMCIA_MEMBASE(x) (x)
|
|
#define SSB_EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000)
|
|
#define SSB_EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000)
|
|
#define SSB_EXTIF_CFGIF_BASE(x) ((x) + 0x800000)
|
|
#define SSB_EXTIF_FLASH_BASE(x) ((x) + 0xc00000)
|
|
|
|
#define SSB_EXTIF_NR_GPIOOUT 5
|
|
/* GPIO NOTE:
|
|
* The multiple instances of output and output enable registers
|
|
* are present to allow driver software for multiple cores to control
|
|
* gpio outputs without needing to share a single register pair.
|
|
* Use the following helper macro to get a register offset value.
|
|
*/
|
|
#define SSB_EXTIF_GPIO_OUT(index) ({ \
|
|
BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT); \
|
|
SSB_EXTIF_GPIO_OUT_BASE + ((index) * 8); \
|
|
})
|
|
#define SSB_EXTIF_GPIO_OUTEN(index) ({ \
|
|
BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT); \
|
|
SSB_EXTIF_GPIO_OUTEN_BASE + ((index) * 8); \
|
|
})
|
|
|
|
/** EXTIF core registers **/
|
|
|
|
#define SSB_EXTIF_CTL 0x0000
|
|
#define SSB_EXTIF_CTL_UARTEN (1 << 0) /* UART enable */
|
|
#define SSB_EXTIF_EXTSTAT 0x0004
|
|
#define SSB_EXTIF_EXTSTAT_EMODE (1 << 0) /* Endian mode (ro) */
|
|
#define SSB_EXTIF_EXTSTAT_EIRQPIN (1 << 1) /* External interrupt pin (ro) */
|
|
#define SSB_EXTIF_EXTSTAT_GPIOIRQPIN (1 << 2) /* GPIO interrupt pin (ro) */
|
|
#define SSB_EXTIF_PCMCIA_CFG 0x0010
|
|
#define SSB_EXTIF_PCMCIA_MEMWAIT 0x0014
|
|
#define SSB_EXTIF_PCMCIA_ATTRWAIT 0x0018
|
|
#define SSB_EXTIF_PCMCIA_IOWAIT 0x001C
|
|
#define SSB_EXTIF_PROG_CFG 0x0020
|
|
#define SSB_EXTIF_PROG_WAITCNT 0x0024
|
|
#define SSB_EXTIF_FLASH_CFG 0x0028
|
|
#define SSB_EXTIF_FLASH_WAITCNT 0x002C
|
|
#define SSB_EXTIF_WATCHDOG 0x0040
|
|
#define SSB_EXTIF_CLOCK_N 0x0044
|
|
#define SSB_EXTIF_CLOCK_SB 0x0048
|
|
#define SSB_EXTIF_CLOCK_PCI 0x004C
|
|
#define SSB_EXTIF_CLOCK_MII 0x0050
|
|
#define SSB_EXTIF_GPIO_IN 0x0060
|
|
#define SSB_EXTIF_GPIO_OUT_BASE 0x0064
|
|
#define SSB_EXTIF_GPIO_OUTEN_BASE 0x0068
|
|
#define SSB_EXTIF_EJTAG_OUTEN 0x0090
|
|
#define SSB_EXTIF_GPIO_INTPOL 0x0094
|
|
#define SSB_EXTIF_GPIO_INTMASK 0x0098
|
|
#define SSB_EXTIF_UART_DATA 0x0300
|
|
#define SSB_EXTIF_UART_TIMER 0x0310
|
|
#define SSB_EXTIF_UART_FCR 0x0320
|
|
#define SSB_EXTIF_UART_LCR 0x0330
|
|
#define SSB_EXTIF_UART_MCR 0x0340
|
|
#define SSB_EXTIF_UART_LSR 0x0350
|
|
#define SSB_EXTIF_UART_MSR 0x0360
|
|
#define SSB_EXTIF_UART_SCRATCH 0x0370
|
|
|
|
|
|
|
|
|
|
/* pcmcia/prog/flash_config */
|
|
#define SSB_EXTCFG_EN (1 << 0) /* enable */
|
|
#define SSB_EXTCFG_MODE 0xE /* mode */
|
|
#define SSB_EXTCFG_MODE_SHIFT 1
|
|
#define SSB_EXTCFG_MODE_FLASH 0x0 /* flash/asynchronous mode */
|
|
#define SSB_EXTCFG_MODE_SYNC 0x2 /* synchronous mode */
|
|
#define SSB_EXTCFG_MODE_PCMCIA 0x4 /* pcmcia mode */
|
|
#define SSB_EXTCFG_DS16 (1 << 4) /* destsize: 0=8bit, 1=16bit */
|
|
#define SSB_EXTCFG_BSWAP (1 << 5) /* byteswap */
|
|
#define SSB_EXTCFG_CLKDIV 0xC0 /* clock divider */
|
|
#define SSB_EXTCFG_CLKDIV_SHIFT 6
|
|
#define SSB_EXTCFG_CLKDIV_2 0x0 /* backplane/2 */
|
|
#define SSB_EXTCFG_CLKDIV_3 0x40 /* backplane/3 */
|
|
#define SSB_EXTCFG_CLKDIV_4 0x80 /* backplane/4 */
|
|
#define SSB_EXTCFG_CLKEN (1 << 8) /* clock enable */
|
|
#define SSB_EXTCFG_STROBE (1 << 9) /* size/bytestrobe (synch only) */
|
|
|
|
/* pcmcia_memwait */
|
|
#define SSB_PCMCIA_MEMW_0 0x0000003F /* waitcount0 */
|
|
#define SSB_PCMCIA_MEMW_1 0x00001F00 /* waitcount1 */
|
|
#define SSB_PCMCIA_MEMW_1_SHIFT 8
|
|
#define SSB_PCMCIA_MEMW_2 0x001F0000 /* waitcount2 */
|
|
#define SSB_PCMCIA_MEMW_2_SHIFT 16
|
|
#define SSB_PCMCIA_MEMW_3 0x1F000000 /* waitcount3 */
|
|
#define SSB_PCMCIA_MEMW_3_SHIFT 24
|
|
|
|
/* pcmcia_attrwait */
|
|
#define SSB_PCMCIA_ATTW_0 0x0000003F /* waitcount0 */
|
|
#define SSB_PCMCIA_ATTW_1 0x00001F00 /* waitcount1 */
|
|
#define SSB_PCMCIA_ATTW_1_SHIFT 8
|
|
#define SSB_PCMCIA_ATTW_2 0x001F0000 /* waitcount2 */
|
|
#define SSB_PCMCIA_ATTW_2_SHIFT 16
|
|
#define SSB_PCMCIA_ATTW_3 0x1F000000 /* waitcount3 */
|
|
#define SSB_PCMCIA_ATTW_3_SHIFT 24
|
|
|
|
/* pcmcia_iowait */
|
|
#define SSB_PCMCIA_IOW_0 0x0000003F /* waitcount0 */
|
|
#define SSB_PCMCIA_IOW_1 0x00001F00 /* waitcount1 */
|
|
#define SSB_PCMCIA_IOW_1_SHIFT 8
|
|
#define SSB_PCMCIA_IOW_2 0x001F0000 /* waitcount2 */
|
|
#define SSB_PCMCIA_IOW_2_SHIFT 16
|
|
#define SSB_PCMCIA_IOW_3 0x1F000000 /* waitcount3 */
|
|
#define SSB_PCMCIA_IOW_3_SHIFT 24
|
|
|
|
/* prog_waitcount */
|
|
#define SSB_PROG_WCNT_0 0x0000001F /* waitcount0 */
|
|
#define SSB_PROG_WCNT_1 0x00001F00 /* waitcount1 */
|
|
#define SSB_PROG_WCNT_1_SHIFT 8
|
|
#define SSB_PROG_WCNT_2 0x001F0000 /* waitcount2 */
|
|
#define SSB_PROG_WCNT_2_SHIFT 16
|
|
#define SSB_PROG_WCNT_3 0x1F000000 /* waitcount3 */
|
|
#define SSB_PROG_WCNT_3_SHIFT 24
|
|
|
|
#define SSB_PROG_W0 0x0000000C
|
|
#define SSB_PROG_W1 0x00000A00
|
|
#define SSB_PROG_W2 0x00020000
|
|
#define SSB_PROG_W3 0x01000000
|
|
|
|
/* flash_waitcount */
|
|
#define SSB_FLASH_WCNT_0 0x0000001F /* waitcount0 */
|
|
#define SSB_FLASH_WCNT_1 0x00001F00 /* waitcount1 */
|
|
#define SSB_FLASH_WCNT_1_SHIFT 8
|
|
#define SSB_FLASH_WCNT_2 0x001F0000 /* waitcount2 */
|
|
#define SSB_FLASH_WCNT_2_SHIFT 16
|
|
#define SSB_FLASH_WCNT_3 0x1F000000 /* waitcount3 */
|
|
#define SSB_FLASH_WCNT_3_SHIFT 24
|
|
|
|
/* watchdog */
|
|
#define SSB_EXTIF_WATCHDOG_CLK 48000000 /* Hz */
|
|
|
|
|
|
|
|
#ifdef CONFIG_SSB_DRIVER_EXTIF
|
|
|
|
struct ssb_extif {
|
|
struct ssb_device *dev;
|
|
};
|
|
|
|
static inline bool ssb_extif_available(struct ssb_extif *extif)
|
|
{
|
|
return (extif->dev != NULL);
|
|
}
|
|
|
|
extern void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
|
|
u32 *plltype, u32 *n, u32 *m);
|
|
|
|
extern void ssb_extif_timing_init(struct ssb_extif *extif,
|
|
unsigned long ns);
|
|
|
|
extern void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
|
|
u32 ticks);
|
|
|
|
/* Extif GPIO pin access */
|
|
u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask);
|
|
u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value);
|
|
u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value);
|
|
u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value);
|
|
u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value);
|
|
|
|
#ifdef CONFIG_SSB_SERIAL
|
|
extern int ssb_extif_serial_init(struct ssb_extif *extif,
|
|
struct ssb_serial_port *ports);
|
|
#endif /* CONFIG_SSB_SERIAL */
|
|
|
|
|
|
#else /* CONFIG_SSB_DRIVER_EXTIF */
|
|
/* extif disabled */
|
|
|
|
struct ssb_extif {
|
|
};
|
|
|
|
static inline bool ssb_extif_available(struct ssb_extif *extif)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline
|
|
void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
|
|
u32 *plltype, u32 *n, u32 *m)
|
|
{
|
|
}
|
|
|
|
static inline
|
|
void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
|
|
u32 ticks)
|
|
{
|
|
}
|
|
|
|
#endif /* CONFIG_SSB_DRIVER_EXTIF */
|
|
#endif /* LINUX_SSB_EXTIFCORE_H_ */
|