linux_dsm_epyc7002/Documentation/video4linux
Hans Verkuil cba63cf8f9 [media] vivid: default to single planar device instances
The default used to be that the first vivid device instance was
single planar, the second multi planar, the third single planar, etc.

However, that turned out to be unexpected and awkward. Change the
driver to always default to single planar.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 14:43:26 -02:00
..
bttv
cx88
cx2341x
4CCs.txt
API.html
cafe_ccic
CARDLIST.au0828 [media] Documentation: update V4L cardlists 2013-02-08 14:51:36 -02:00
CARDLIST.bttv Documentation: Update cardlists 2014-04-23 09:58:16 -03:00
CARDLIST.cx88
CARDLIST.cx23885 [media] update cx23885 and em28xx cardlists 2014-07-26 11:55:10 -03:00
CARDLIST.em28xx [media] update cx23885 and em28xx cardlists 2014-07-26 11:55:10 -03:00
CARDLIST.ivtv
CARDLIST.saa7134 [media] update saa7134 and tuner cardlists 2013-05-21 08:16:19 -03:00
CARDLIST.saa7164
CARDLIST.tm6000
CARDLIST.tuner [media] update saa7134 and tuner cardlists 2013-05-21 08:16:19 -03:00
CARDLIST.usbvision
cpia2_overview.txt
CQcam.txt
cx18.txt
extract_xc3028.pl [media] extract_xc3028.pl: fix permissions 2013-01-11 13:01:37 -02:00
fimc.txt [media] exynos4-is: Remove support for non-dt platforms 2014-05-23 18:52:54 -03:00
gspca.txt [media] media: gspca: sn9c20x: add ID for Genius Look 1320 V2 2014-02-28 14:37:43 -03:00
hauppauge-wintv-cx88-ir.txt
lifeview.txt
Makefile v4l2-pci-skeleton: Only build if PCI is available 2014-09-26 11:02:58 +02:00
meye.txt
not-in-cx2388x-datasheet.txt
omap3isp.txt
omap4_camera.txt [media] v4l: omap4iss: Add support for OMAP4 camera interface - Core 2013-12-03 17:21:04 -02:00
pxa_camera.txt
radiotrack.txt
README.cpia2
README.cx88
README.davinci-vpbe
README.ir
README.ivtv
README.pvrusb2
README.saa7134
README.tlg2300
sh_mobile_ceu_camera.txt
si470x.txt [media] radio-si470x doc: add info about v4l2-ctl and sox+alsa 2013-02-13 17:33:20 -02:00
si476x.txt [media] doc: no singing 2013-12-10 17:13:33 -02:00
si4713.txt
soc-camera.txt Documentation/video4linux/soc-camera.txt fix a typo 2013-06-05 16:24:57 +02:00
uvcvideo.txt
v4l2-controls.txt [media] v4l2-controls.txt: update to the new way of accessing controls 2014-07-17 11:57:24 -03:00
v4l2-framework.txt [media] media: Documentation: remove V4L2_FL_USE_FH_PRIO flag 2014-07-04 16:16:11 -03:00
v4l2-pci-skeleton.c [media] media: Documentation: remove V4L2_FL_USE_FH_PRIO flag 2014-07-04 16:16:11 -03:00
videobuf
vivid.txt [media] vivid: default to single planar device instances 2014-11-03 14:43:26 -02:00
w9966.txt
Zoran
zr364xx.txt

tlg2300 release notes
====================

This is a v4l2/dvb device driver for the tlg2300 chip.


current status
==============

video
	- support mmap and read().(no overlay)

audio
	- The driver will register a ALSA card for the audio input.

vbi
	- Works for almost TV norms.

dvb-t
	- works for DVB-T

FM
	- Works for radio.

---------------------------------------------------------------------------
TESTED APPLICATIONS:

-VLC1.0.4 test the video and dvb. The GUI is friendly to use.

-Mplayer test the video.

-Mplayer test the FM. The mplayer should be compiled with --enable-radio and
	 --enable-radio-capture.
	The command runs as this(The alsa audio registers to card 1):
	#mplayer radio://103.7/capture/ -radio adevice=hw=1,0:arate=48000 \
		-rawaudio rate=48000:channels=2

---------------------------------------------------------------------------
KNOWN PROBLEMS:
about preemphasis:
	You can set the preemphasis for radio by the following command:
	#v4l2-ctl -d /dev/radio0 --set-ctrl=pre_emphasis_settings=1

	"pre_emphasis_settings=1" means that you select the 50us. If you want
	to select the 75us, please use "pre_emphasis_settings=2"