AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-27 18:25:04 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
53c580c1bd
linux_dsm_epyc7002/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
Linus Torvalds 537433b624 ARM: SoC device tree updates for 4.16 
We get a moderate number of new machines this time, and only one
 new SoC variant (Actions S700):
 
 Actions:
   S700 Soc and CubieBoard7 development board
   Allo.com Sparky Single-board-computer
 
 Allwinner:
   Orange Pi R1 development board
   Libre Computer Board ALL-H3-CC H3 single-board computer
 
 ASpeed ast2x00:
    Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500
    Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500
    Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400
 
 AT91:
   Axentia Nattis/Natte digital signage
   sama5d2 PTC-ek Evaluation board
 
 Freescale/NXP i.MX:
    SolidRun Humminboard2 development board
    Variscite DART-MX6 SoM and Carrier-board
    Technologic TS-4600 and TS-7970 development board
    Toradex Colibri iMX7D SoM board
    v1.5 variant of Solidrun Cubox-i and Hummingboard
 
 Freescale/NXP Layerscape:
    Moxa UC-8410A Series industrial computer
 
 Gemini:
   D-Link DNS-313 NAS enclosure
 
 OMAP:
   LogicPD OMAP35xx SOM-LV devkit
   LogicPD OMAP35xx Torpedo devkit
 
 Renesas:
   r8a77970 (V3M) Starter Kit board
   r8a7795 (M3-W) Salvator-XS board
 
 We finally managed to get the dtc warnings under control, with no more
 build-time warnings for bad device tree files. This includes fixes for
 the majority of platforms, including nomadik, samsung, lpc32xx, STi,
 spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood,
 renesas, hisilicon, and broadcom.
 
 Files get rearranged on a few platforms, in particular the Marvell
 Armada 7K/8K device tree files are changed in preparation for future
 SoC support, based on more than two of the same chips in one package,
 and some boards get renamed for oxnas for consistency.
 
 Finally, many existing SoCs gain descriptions for additional on-chip
 devices that we can now support with kernel drivers:
 
   Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG)
   Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi)
   Aspeed clk controller support
   Freescale LS1088A, LS1021A device support
   Gemini Ethernet, PCI, TVE, panel
   Keystone gpio, qspi, more uarts
   Mediatek cpufreq, regulator, clock, reset
   Marvell thermal, cpufreq, nand
   Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu
   Rockchip Mipi, GPU, display
   Samsung Exynos5433 PMU, power domain, nfc
   Spreadtrum: sc9860 clocks
   Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ...
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJac0fiAAoJEGCrR//JCVInGUYP/ikTcjrmtQxmMINdsy88gmN3
 lPk3jGoViyRzc9Y6hGUUXn1YNdK8+IqRkqLnhtVX3cOLS5pP2HwsvSgPmSSB3eQe
 NOhXUNRQaTbeS/eBGZxJbxEKSowQHU+43M2kRNQOht7UQzS8NnBj/1RGaxcFyNSw
 gIixWDZLgVTNCSloPaSrZmiwSa7rSM2q0ncBzzeafAZiTRNeOb6IUpnqu/n0Qnot
 er6VoEyxp6ThFqRB7O8bCAIwgqlyB9xSGBPNR/JI0e0xXo3KVE/2AjHYDHVP/Ttx
 X8vtb3m+RED7tX4oCmlrHb1SAAKpNi1Vzdg4PxmKCa7yb5xPog7OEr3rnpijzCL0
 y8IJLlVSPyx31yB7mIIzCjrcISrT7tOXp0ha88/NgNsGXw5Ln0GVEqTkmSrz/JWo
 z1G2tNwnstS64KK+chHOZfUto4Rzbrpmr9L1ziKIpSQtiNyOmiSu1c3EjHim7x4I
 Mfiv6+8J71faUYuKVK1oaX0gi43oSZHu4NuniQy8dg/OIpgPpHHpG1qCyAzgC6Pa
 r1Am2w33CXrJI78b4zG2pIDx0HghIjFUtjX9tijoFiMs1EZgbV6cJ2meep6Sy+XV
 RBxHXPU8obdcuBfhgjEygwLI0HSe0R78B15qPP/SNxAFeAvE950xfPrGAoZg7qo/
 o6B2iQSfsYQJbD8rUHaA
 =qN1F
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates from Arnd Bergmann:
 "We get a moderate number of new machines this time, and only one new
  SoC variant (Actions S700):

  Actions:
   - S700 Soc and CubieBoard7 development board
   - Allo.com Sparky Single-board-computer

  Allwinner:
   - Orange Pi R1 development board
   - Libre Computer Board ALL-H3-CC H3 single-board computer

  ASpeed ast2x00:
   - Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500
   - Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500
   - Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400

  AT91:
   - Axentia Nattis/Natte digital signage
   - sama5d2 PTC-ek Evaluation board

  Freescale/NXP i.MX:
   - SolidRun Humminboard2 development board
   - Variscite DART-MX6 SoM and Carrier-board
   - Technologic TS-4600 and TS-7970 development board
   - Toradex Colibri iMX7D SoM board
   - v1.5 variant of Solidrun Cubox-i and Hummingboard

  Freescale/NXP Layerscape:
   - Moxa UC-8410A Series industrial computer

  Gemini:
   - D-Link DNS-313 NAS enclosure

  OMAP:
   - LogicPD OMAP35xx SOM-LV devkit
   - LogicPD OMAP35xx Torpedo devkit

  Renesas:
   - r8a77970 (V3M) Starter Kit board
   - r8a7795 (M3-W) Salvator-XS board

  We finally managed to get the dtc warnings under control, with no more
  build-time warnings for bad device tree files. This includes fixes for
  the majority of platforms, including nomadik, samsung, lpc32xx, STi,
  spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood,
  renesas, hisilicon, and broadcom.

  Files get rearranged on a few platforms, in particular the Marvell
  Armada 7K/8K device tree files are changed in preparation for future
  SoC support, based on more than two of the same chips in one package,
  and some boards get renamed for oxnas for consistency.

  Finally, many existing SoCs gain descriptions for additional on-chip
  devices that we can now support with kernel drivers:

   - Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG)
   - Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi)
   - Aspeed clk controller support
   - Freescale LS1088A, LS1021A device support
   - Gemini Ethernet, PCI, TVE, panel
   - Keystone gpio, qspi, more uarts
   - Mediatek cpufreq, regulator, clock, reset
   - Marvell thermal, cpufreq, nand
   - Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu
   - Rockchip Mipi, GPU, display
   - Samsung Exynos5433 PMU, power domain, nfc
   - Spreadtrum: sc9860 clocks
   - Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..."

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits)
  arm64: dts: stratix10: fix SPI settings
  ARM: dts: socfpga: add i2c reset signals
  arm64: dts: stratix10: add USB ECC reset bit
  arm64: dts: stratix10: enable USB on the devkit
  ARM: dts: socfpga: disable over-current for Arria10 USB devkit
  ARM: dts: Nokia N9: add support for up/down keys in the dts
  ARM: dts: nomadik: add interrupt-parent for clcd
  ARM: dts: Add ethernet to a bunch of platforms
  ARM: dts: Add ethernet to the Gemini SoC
  ARM: dts: rename oxnas dts files
  ARM: dts: s5pv210: add interrupt-parent for ohci
  ARM: lpc3250: fix uda1380 gpio numbers
  ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property
  ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones
  ARM: dts: n900: Add aliases for lcd and tvout displays
  ARM: dts: Update ti-sysc data for existing users
  ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance
  arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string
  arm: spear13xx: Fix spics gpio controller's warning
  arm: spear13xx: Fix dmas cells
  ...
2018-02-01 16:07:54 -08:00

543 lines
13 KiB
Plaintext
Raw Blame History

/*
* Copyright (c) 2014 MediaTek Inc.
* Author: Eddie Huang <eddie.huang@mediatek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "mt8173.dtsi"
/ {
model = "MediaTek MT8173 evaluation board";
compatible = "mediatek,mt8173-evb", "mediatek,mt8173";
aliases {
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
};
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0x80000000>;
};
chosen { };
connector {
compatible = "hdmi-connector";
label = "hdmi";
type = "d";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&hdmi0_out>;
};
};
};
extcon_usb: extcon_iddig {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
};
usb_p1_vbus: regulator@0 {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
usb_p0_vbus: regulator@1 {
compatible = "regulator-fixed";
regulator-name = "vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&pio 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&cec {
status = "okay";
};
&cpu0 {
proc-supply = <&mt6397_vpca15_reg>;
};
&cpu1 {
proc-supply = <&mt6397_vpca15_reg>;
};
&cpu2 {
proc-supply = <&da9211_vcpu_reg>;
sram-supply = <&mt6397_vsramca7_reg>;
};
&cpu3 {
proc-supply = <&da9211_vcpu_reg>;
sram-supply = <&mt6397_vsramca7_reg>;
};
&dpi0 {
status = "okay";
};
&hdmi_phy {
status = "okay";
};
&hdmi0 {
status = "okay";
ports {
port@1 {
reg = <1>;
hdmi0_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
&i2c1 {
status = "okay";
buck: da9211@68 {
compatible = "dlg,da9211";
reg = <0x68>;
regulators {
da9211_vcpu_reg: BUCKA {
regulator-name = "VBUCKA";
regulator-min-microvolt = < 700000>;
regulator-max-microvolt = <1310000>;
regulator-min-microamp = <2000000>;
regulator-max-microamp = <4400000>;
regulator-ramp-delay = <10000>;
regulator-always-on;
};
da9211_vgpu_reg: BUCKB {
regulator-name = "VBUCKB";
regulator-min-microvolt = < 700000>;
regulator-max-microvolt = <1310000>;
regulator-min-microamp = <2000000>;
regulator-max-microamp = <3000000>;
regulator-ramp-delay = <10000>;
};
};
};
};
&mmc0 {
status = "okay";
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_pins_default>;
pinctrl-1 = <&mmc0_pins_uhs>;
bus-width = <8>;
max-frequency = <50000000>;
cap-mmc-highspeed;
mediatek,hs200-cmd-int-delay=<26>;
mediatek,hs400-cmd-int-delay=<14>;
mediatek,hs400-cmd-resp-sel-rising;
vmmc-supply = <&mt6397_vemc_3v3_reg>;
vqmmc-supply = <&mt6397_vio18_reg>;
non-removable;
};
&mmc1 {
status = "okay";
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc1_pins_default>;
pinctrl-1 = <&mmc1_pins_uhs>;
bus-width = <4>;
max-frequency = <50000000>;
cap-sd-highspeed;
sd-uhs-sdr25;
cd-gpios = <&pio 132 0>;
vmmc-supply = <&mt6397_vmch_reg>;
vqmmc-supply = <&mt6397_vmc_reg>;
};
&pio {
disp_pwm0_pins: disp_pwm0_pins {
pins1 {
pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>;
output-low;
};
};
mmc0_pins_default: mmc0default {
pins_cmd_dat {
pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
<MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
<MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
<MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
<MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
<MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
<MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
<MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
<MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
input-enable;
bias-pull-up;
};
pins_clk {
pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
bias-pull-down;
};
pins_rst {
pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>;
bias-pull-up;
};
};
mmc1_pins_default: mmc1default {
pins_cmd_dat {
pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
<MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
<MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
<MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
<MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
input-enable;
drive-strength = <MTK_DRIVE_4mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
};
pins_clk {
pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
bias-pull-down;
drive-strength = <MTK_DRIVE_4mA>;
};
pins_insert {
pinmux = <MT8173_PIN_132_I2S0_DATA1__FUNC_GPIO132>;
bias-pull-up;
};
};
mmc0_pins_uhs: mmc0 {
pins_cmd_dat {
pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
<MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
<MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
<MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
<MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
<MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
<MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
<MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
<MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
input-enable;
drive-strength = <MTK_DRIVE_2mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins_clk {
pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
drive-strength = <MTK_DRIVE_2mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
};
pins_rst {
pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>;
bias-pull-up;
};
};
mmc1_pins_uhs: mmc1 {
pins_cmd_dat {
pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
<MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
<MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
<MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
<MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
input-enable;
drive-strength = <MTK_DRIVE_4mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
};
pins_clk {
pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
drive-strength = <MTK_DRIVE_4mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
};
usb_id_pins_float: usb_iddig_pull_up {
pins_iddig {
pinmux = <MT8173_PIN_16_IDDIG__FUNC_IDDIG>;
bias-pull-up;
};
};
usb_id_pins_ground: usb_iddig_pull_down {
pins_iddig {
pinmux = <MT8173_PIN_16_IDDIG__FUNC_IDDIG>;
bias-pull-down;
};
};
};
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&disp_pwm0_pins>;
status = "okay";
};
&pwrap {
/* Only MT8173 E1 needs USB power domain */
power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
pmic: mt6397 {
compatible = "mediatek,mt6397";
interrupt-parent = <&pio>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
mt6397regulator: mt6397regulator {
compatible = "mediatek,mt6397-regulator";
mt6397_vpca15_reg: buck_vpca15 {
regulator-compatible = "buck_vpca15";
regulator-name = "vpca15";
regulator-min-microvolt = < 700000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <12500>;
regulator-always-on;
};
mt6397_vpca7_reg: buck_vpca7 {
regulator-compatible = "buck_vpca7";
regulator-name = "vpca7";
regulator-min-microvolt = < 700000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <12500>;
regulator-enable-ramp-delay = <115>;
};
mt6397_vsramca15_reg: buck_vsramca15 {
regulator-compatible = "buck_vsramca15";
regulator-name = "vsramca15";
regulator-min-microvolt = < 700000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <12500>;
regulator-always-on;
};
mt6397_vsramca7_reg: buck_vsramca7 {
regulator-compatible = "buck_vsramca7";
regulator-name = "vsramca7";
regulator-min-microvolt = < 700000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <12500>;
regulator-always-on;
};
mt6397_vcore_reg: buck_vcore {
regulator-compatible = "buck_vcore";
regulator-name = "vcore";
regulator-min-microvolt = < 700000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <12500>;
regulator-always-on;
};
mt6397_vgpu_reg: buck_vgpu {
regulator-compatible = "buck_vgpu";
regulator-name = "vgpu";
regulator-min-microvolt = < 700000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <12500>;
regulator-enable-ramp-delay = <115>;
};
mt6397_vdrm_reg: buck_vdrm {
regulator-compatible = "buck_vdrm";
regulator-name = "vdrm";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1400000>;
regulator-ramp-delay = <12500>;
regulator-always-on;
};
mt6397_vio18_reg: buck_vio18 {
regulator-compatible = "buck_vio18";
regulator-name = "vio18";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <1980000>;
regulator-ramp-delay = <12500>;
regulator-always-on;
};
mt6397_vtcxo_reg: ldo_vtcxo {
regulator-compatible = "ldo_vtcxo";
regulator-name = "vtcxo";
regulator-always-on;
};
mt6397_va28_reg: ldo_va28 {
regulator-compatible = "ldo_va28";
regulator-name = "va28";
regulator-always-on;
};
mt6397_vcama_reg: ldo_vcama {
regulator-compatible = "ldo_vcama";
regulator-name = "vcama";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <2800000>;
regulator-enable-ramp-delay = <218>;
};
mt6397_vio28_reg: ldo_vio28 {
regulator-compatible = "ldo_vio28";
regulator-name = "vio28";
regulator-always-on;
};
mt6397_vusb_reg: ldo_vusb {
regulator-compatible = "ldo_vusb";
regulator-name = "vusb";
};
mt6397_vmc_reg: ldo_vmc {
regulator-compatible = "ldo_vmc";
regulator-name = "vmc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <218>;
};
mt6397_vmch_reg: ldo_vmch {
regulator-compatible = "ldo_vmch";
regulator-name = "vmch";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <218>;
};
mt6397_vemc_3v3_reg: ldo_vemc3v3 {
regulator-compatible = "ldo_vemc3v3";
regulator-name = "vemc_3v3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <218>;
};
mt6397_vgp1_reg: ldo_vgp1 {
regulator-compatible = "ldo_vgp1";
regulator-name = "vcamd";
regulator-min-microvolt = <1220000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <240>;
};
mt6397_vgp2_reg: ldo_vgp2 {
regulator-compatible = "ldo_vgp2";
regulator-name = "vcamio";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <218>;
};
mt6397_vgp3_reg: ldo_vgp3 {
regulator-compatible = "ldo_vgp3";
regulator-name = "vcamaf";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <218>;
};
mt6397_vgp4_reg: ldo_vgp4 {
regulator-compatible = "ldo_vgp4";
regulator-name = "vgp4";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <218>;
};
mt6397_vgp5_reg: ldo_vgp5 {
regulator-compatible = "ldo_vgp5";
regulator-name = "vgp5";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3000000>;
regulator-enable-ramp-delay = <218>;
};
mt6397_vgp6_reg: ldo_vgp6 {
regulator-compatible = "ldo_vgp6";
regulator-name = "vgp6";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <218>;
};
mt6397_vibr_reg: ldo_vibr {
regulator-compatible = "ldo_vibr";
regulator-name = "vibr";
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <218>;
};
};
};
};
&pio {
spi_pins_a: spi0 {
pins_spi {
pinmux = <MT8173_PIN_69_SPI_CK__FUNC_SPI_CK_0_>,
<MT8173_PIN_70_SPI_MI__FUNC_SPI_MI_0_>,
<MT8173_PIN_71_SPI_MO__FUNC_SPI_MO_0_>,
<MT8173_PIN_72_SPI_CS__FUNC_SPI_CS_0_>;
};
};
};
&spi {
pinctrl-names = "default";
pinctrl-0 = <&spi_pins_a>;
mediatek,pad-select = <0>;
status = "okay";
};
&ssusb {
vusb33-supply = <&mt6397_vusb_reg>;
vbus-supply = <&usb_p0_vbus>;
extcon = <&extcon_usb>;
dr_mode = "otg";
wakeup-source;
pinctrl-names = "default", "id_float", "id_ground";
pinctrl-0 = <&usb_id_pins_float>;
pinctrl-1 = <&usb_id_pins_float>;
pinctrl-2 = <&usb_id_pins_ground>;
status = "okay";
};
&uart0 {
status = "okay";
};
&usb_host {
vusb33-supply = <&mt6397_vusb_reg>;
vbus-supply = <&usb_p1_vbus>;
status = "okay";
};
Reference in New Issue View Git Blame Copy Permalink