mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-11 20:06:44 +07:00
330 lines
10 KiB
C
330 lines
10 KiB
C
/* sis900.h Definitions for SiS ethernet controllers including 7014/7016 and 900
|
|
* Copyright 1999 Silicon Integrated System Corporation
|
|
* References:
|
|
* SiS 7016 Fast Ethernet PCI Bus 10/100 Mbps LAN Controller with OnNow Support,
|
|
* preliminary Rev. 1.0 Jan. 14, 1998
|
|
* SiS 900 Fast Ethernet PCI Bus 10/100 Mbps LAN Single Chip with OnNow Support,
|
|
* preliminary Rev. 1.0 Nov. 10, 1998
|
|
* SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution,
|
|
* preliminary Rev. 1.0 Jan. 18, 1998
|
|
* http://www.sis.com.tw/support/databook.htm
|
|
*/
|
|
|
|
/*
|
|
* SiS 7016 and SiS 900 ethernet controller registers
|
|
*/
|
|
|
|
/* The I/O extent, SiS 900 needs 256 bytes of io address */
|
|
#define SIS900_TOTAL_SIZE 0x100
|
|
|
|
/* Symbolic offsets to registers. */
|
|
enum sis900_registers {
|
|
cr=0x0, //Command Register
|
|
cfg=0x4, //Configuration Register
|
|
mear=0x8, //EEPROM Access Register
|
|
ptscr=0xc, //PCI Test Control Register
|
|
isr=0x10, //Interrupt Status Register
|
|
imr=0x14, //Interrupt Mask Register
|
|
ier=0x18, //Interrupt Enable Register
|
|
epar=0x18, //Enhanced PHY Access Register
|
|
txdp=0x20, //Transmit Descriptor Pointer Register
|
|
txcfg=0x24, //Transmit Configuration Register
|
|
rxdp=0x30, //Receive Descriptor Pointer Register
|
|
rxcfg=0x34, //Receive Configuration Register
|
|
flctrl=0x38, //Flow Control Register
|
|
rxlen=0x3c, //Receive Packet Length Register
|
|
rfcr=0x48, //Receive Filter Control Register
|
|
rfdr=0x4C, //Receive Filter Data Register
|
|
pmctrl=0xB0, //Power Management Control Register
|
|
pmer=0xB4 //Power Management Wake-up Event Register
|
|
};
|
|
|
|
/* Symbolic names for bits in various registers */
|
|
enum sis900_command_register_bits {
|
|
RELOAD = 0x00000400, ACCESSMODE = 0x00000200,/* ET */
|
|
RESET = 0x00000100, SWI = 0x00000080, RxRESET = 0x00000020,
|
|
TxRESET = 0x00000010, RxDIS = 0x00000008, RxENA = 0x00000004,
|
|
TxDIS = 0x00000002, TxENA = 0x00000001
|
|
};
|
|
|
|
enum sis900_configuration_register_bits {
|
|
DESCRFMT = 0x00000100 /* 7016 specific */, REQALG = 0x00000080,
|
|
SB = 0x00000040, POW = 0x00000020, EXD = 0x00000010,
|
|
PESEL = 0x00000008, LPM = 0x00000004, BEM = 0x00000001,
|
|
/* 635 & 900B Specific */
|
|
RND_CNT = 0x00000400, FAIR_BACKOFF = 0x00000200,
|
|
EDB_MASTER_EN = 0x00002000
|
|
};
|
|
|
|
enum sis900_eeprom_access_reigster_bits {
|
|
MDC = 0x00000040, MDDIR = 0x00000020, MDIO = 0x00000010, /* 7016 specific */
|
|
EECS = 0x00000008, EECLK = 0x00000004, EEDO = 0x00000002,
|
|
EEDI = 0x00000001
|
|
};
|
|
|
|
enum sis900_interrupt_register_bits {
|
|
WKEVT = 0x10000000, TxPAUSEEND = 0x08000000, TxPAUSE = 0x04000000,
|
|
TxRCMP = 0x02000000, RxRCMP = 0x01000000, DPERR = 0x00800000,
|
|
SSERR = 0x00400000, RMABT = 0x00200000, RTABT = 0x00100000,
|
|
RxSOVR = 0x00010000, HIBERR = 0x00008000, SWINT = 0x00001000,
|
|
MIBINT = 0x00000800, TxURN = 0x00000400, TxIDLE = 0x00000200,
|
|
TxERR = 0x00000100, TxDESC = 0x00000080, TxOK = 0x00000040,
|
|
RxORN = 0x00000020, RxIDLE = 0x00000010, RxEARLY = 0x00000008,
|
|
RxERR = 0x00000004, RxDESC = 0x00000002, RxOK = 0x00000001
|
|
};
|
|
|
|
enum sis900_interrupt_enable_reigster_bits {
|
|
IE = 0x00000001
|
|
};
|
|
|
|
/* maximum dma burst for transmission and receive */
|
|
#define MAX_DMA_RANGE 7 /* actually 0 means MAXIMUM !! */
|
|
#define TxMXDMA_shift 20
|
|
#define RxMXDMA_shift 20
|
|
|
|
enum sis900_tx_rx_dma{
|
|
DMA_BURST_512 = 0, DMA_BURST_64 = 5
|
|
};
|
|
|
|
/* transmit FIFO thresholds */
|
|
#define TX_FILL_THRESH 16 /* 1/4 FIFO size */
|
|
#define TxFILLT_shift 8
|
|
#define TxDRNT_shift 0
|
|
#define TxDRNT_100 48 /* 3/4 FIFO size */
|
|
#define TxDRNT_10 16 /* 1/2 FIFO size */
|
|
|
|
enum sis900_transmit_config_register_bits {
|
|
TxCSI = 0x80000000, TxHBI = 0x40000000, TxMLB = 0x20000000,
|
|
TxATP = 0x10000000, TxIFG = 0x0C000000, TxFILLT = 0x00003F00,
|
|
TxDRNT = 0x0000003F
|
|
};
|
|
|
|
/* recevie FIFO thresholds */
|
|
#define RxDRNT_shift 1
|
|
#define RxDRNT_100 16 /* 1/2 FIFO size */
|
|
#define RxDRNT_10 24 /* 3/4 FIFO size */
|
|
|
|
enum sis900_reveive_config_register_bits {
|
|
RxAEP = 0x80000000, RxARP = 0x40000000, RxATX = 0x10000000,
|
|
RxAJAB = 0x08000000, RxDRNT = 0x0000007F
|
|
};
|
|
|
|
#define RFAA_shift 28
|
|
#define RFADDR_shift 16
|
|
|
|
enum sis900_receive_filter_control_register_bits {
|
|
RFEN = 0x80000000, RFAAB = 0x40000000, RFAAM = 0x20000000,
|
|
RFAAP = 0x10000000, RFPromiscuous = (RFAAB|RFAAM|RFAAP)
|
|
};
|
|
|
|
enum sis900_reveive_filter_data_mask {
|
|
RFDAT = 0x0000FFFF
|
|
};
|
|
|
|
/* EEPROM Addresses */
|
|
enum sis900_eeprom_address {
|
|
EEPROMSignature = 0x00, EEPROMVendorID = 0x02, EEPROMDeviceID = 0x03,
|
|
EEPROMMACAddr = 0x08, EEPROMChecksum = 0x0b
|
|
};
|
|
|
|
/* The EEPROM commands include the alway-set leading bit. Refer to NM93Cxx datasheet */
|
|
enum sis900_eeprom_command {
|
|
EEread = 0x0180, EEwrite = 0x0140, EEerase = 0x01C0,
|
|
EEwriteEnable = 0x0130, EEwriteDisable = 0x0100,
|
|
EEeraseAll = 0x0120, EEwriteAll = 0x0110,
|
|
EEaddrMask = 0x013F, EEcmdShift = 16
|
|
};
|
|
|
|
/* For SiS962 or SiS963, request the eeprom software access */
|
|
enum sis96x_eeprom_command {
|
|
EEREQ = 0x00000400, EEDONE = 0x00000200, EEGNT = 0x00000100
|
|
};
|
|
|
|
/* PCI Registers */
|
|
enum sis900_pci_registers {
|
|
CFGPMC = 0x40,
|
|
CFGPMCSR = 0x44
|
|
};
|
|
|
|
/* Power management capabilities bits */
|
|
enum sis900_cfgpmc_register_bits {
|
|
PMVER = 0x00070000,
|
|
DSI = 0x00100000,
|
|
PMESP = 0xf8000000
|
|
};
|
|
|
|
enum sis900_pmesp_bits {
|
|
PME_D0 = 0x1,
|
|
PME_D1 = 0x2,
|
|
PME_D2 = 0x4,
|
|
PME_D3H = 0x8,
|
|
PME_D3C = 0x10
|
|
};
|
|
|
|
/* Power management control/status bits */
|
|
enum sis900_cfgpmcsr_register_bits {
|
|
PMESTS = 0x00004000,
|
|
PME_EN = 0x00000100, // Power management enable
|
|
PWR_STA = 0x00000003 // Current power state
|
|
};
|
|
|
|
/* Wake-on-LAN support. */
|
|
enum sis900_power_management_control_register_bits {
|
|
LINKLOSS = 0x00000001,
|
|
LINKON = 0x00000002,
|
|
MAGICPKT = 0x00000400,
|
|
ALGORITHM = 0x00000800,
|
|
FRM1EN = 0x00100000,
|
|
FRM2EN = 0x00200000,
|
|
FRM3EN = 0x00400000,
|
|
FRM1ACS = 0x01000000,
|
|
FRM2ACS = 0x02000000,
|
|
FRM3ACS = 0x04000000,
|
|
WAKEALL = 0x40000000,
|
|
GATECLK = 0x80000000
|
|
};
|
|
|
|
/* Management Data I/O (mdio) frame */
|
|
#define MIIread 0x6000
|
|
#define MIIwrite 0x5002
|
|
#define MIIpmdShift 7
|
|
#define MIIregShift 2
|
|
#define MIIcmdLen 16
|
|
#define MIIcmdShift 16
|
|
|
|
/* Buffer Descriptor Status*/
|
|
enum sis900_buffer_status {
|
|
OWN = 0x80000000, MORE = 0x40000000, INTR = 0x20000000,
|
|
SUPCRC = 0x10000000, INCCRC = 0x10000000,
|
|
OK = 0x08000000, DSIZE = 0x00000FFF
|
|
};
|
|
/* Status for TX Buffers */
|
|
enum sis900_tx_buffer_status {
|
|
ABORT = 0x04000000, UNDERRUN = 0x02000000, NOCARRIER = 0x01000000,
|
|
DEFERD = 0x00800000, EXCDEFER = 0x00400000, OWCOLL = 0x00200000,
|
|
EXCCOLL = 0x00100000, COLCNT = 0x000F0000
|
|
};
|
|
|
|
enum sis900_rx_bufer_status {
|
|
OVERRUN = 0x02000000, DEST = 0x00800000, BCAST = 0x01800000,
|
|
MCAST = 0x01000000, UNIMATCH = 0x00800000, TOOLONG = 0x00400000,
|
|
RUNT = 0x00200000, RXISERR = 0x00100000, CRCERR = 0x00080000,
|
|
FAERR = 0x00040000, LOOPBK = 0x00020000, RXCOL = 0x00010000
|
|
};
|
|
|
|
/* MII register offsets */
|
|
enum mii_registers {
|
|
MII_CONTROL = 0x0000, MII_STATUS = 0x0001, MII_PHY_ID0 = 0x0002,
|
|
MII_PHY_ID1 = 0x0003, MII_ANADV = 0x0004, MII_ANLPAR = 0x0005,
|
|
MII_ANEXT = 0x0006
|
|
};
|
|
|
|
/* mii registers specific to SiS 900 */
|
|
enum sis_mii_registers {
|
|
MII_CONFIG1 = 0x0010, MII_CONFIG2 = 0x0011, MII_STSOUT = 0x0012,
|
|
MII_MASK = 0x0013, MII_RESV = 0x0014
|
|
};
|
|
|
|
/* mii registers specific to ICS 1893 */
|
|
enum ics_mii_registers {
|
|
MII_EXTCTRL = 0x0010, MII_QPDSTS = 0x0011, MII_10BTOP = 0x0012,
|
|
MII_EXTCTRL2 = 0x0013
|
|
};
|
|
|
|
/* mii registers specific to AMD 79C901 */
|
|
enum amd_mii_registers {
|
|
MII_STATUS_SUMMARY = 0x0018
|
|
};
|
|
|
|
/* MII Control register bit definitions. */
|
|
enum mii_control_register_bits {
|
|
MII_CNTL_FDX = 0x0100, MII_CNTL_RST_AUTO = 0x0200,
|
|
MII_CNTL_ISOLATE = 0x0400, MII_CNTL_PWRDWN = 0x0800,
|
|
MII_CNTL_AUTO = 0x1000, MII_CNTL_SPEED = 0x2000,
|
|
MII_CNTL_LPBK = 0x4000, MII_CNTL_RESET = 0x8000
|
|
};
|
|
|
|
/* MII Status register bit */
|
|
enum mii_status_register_bits {
|
|
MII_STAT_EXT = 0x0001, MII_STAT_JAB = 0x0002,
|
|
MII_STAT_LINK = 0x0004, MII_STAT_CAN_AUTO = 0x0008,
|
|
MII_STAT_FAULT = 0x0010, MII_STAT_AUTO_DONE = 0x0020,
|
|
MII_STAT_CAN_T = 0x0800, MII_STAT_CAN_T_FDX = 0x1000,
|
|
MII_STAT_CAN_TX = 0x2000, MII_STAT_CAN_TX_FDX = 0x4000,
|
|
MII_STAT_CAN_T4 = 0x8000
|
|
};
|
|
|
|
#define MII_ID1_OUI_LO 0xFC00 /* low bits of OUI mask */
|
|
#define MII_ID1_MODEL 0x03F0 /* model number */
|
|
#define MII_ID1_REV 0x000F /* model number */
|
|
|
|
/* MII NWAY Register Bits ...
|
|
valid for the ANAR (Auto-Negotiation Advertisement) and
|
|
ANLPAR (Auto-Negotiation Link Partner) registers */
|
|
enum mii_nway_register_bits {
|
|
MII_NWAY_NODE_SEL = 0x001f, MII_NWAY_CSMA_CD = 0x0001,
|
|
MII_NWAY_T = 0x0020, MII_NWAY_T_FDX = 0x0040,
|
|
MII_NWAY_TX = 0x0080, MII_NWAY_TX_FDX = 0x0100,
|
|
MII_NWAY_T4 = 0x0200, MII_NWAY_PAUSE = 0x0400,
|
|
MII_NWAY_RF = 0x2000, MII_NWAY_ACK = 0x4000,
|
|
MII_NWAY_NP = 0x8000
|
|
};
|
|
|
|
enum mii_stsout_register_bits {
|
|
MII_STSOUT_LINK_FAIL = 0x4000,
|
|
MII_STSOUT_SPD = 0x0080, MII_STSOUT_DPLX = 0x0040
|
|
};
|
|
|
|
enum mii_stsics_register_bits {
|
|
MII_STSICS_SPD = 0x8000, MII_STSICS_DPLX = 0x4000,
|
|
MII_STSICS_LINKSTS = 0x0001
|
|
};
|
|
|
|
enum mii_stssum_register_bits {
|
|
MII_STSSUM_LINK = 0x0008, MII_STSSUM_DPLX = 0x0004,
|
|
MII_STSSUM_AUTO = 0x0002, MII_STSSUM_SPD = 0x0001
|
|
};
|
|
|
|
enum sis900_revision_id {
|
|
SIS630A_900_REV = 0x80, SIS630E_900_REV = 0x81,
|
|
SIS630S_900_REV = 0x82, SIS630EA1_900_REV = 0x83,
|
|
SIS630ET_900_REV = 0x84, SIS635A_900_REV = 0x90,
|
|
SIS96x_900_REV = 0X91, SIS900B_900_REV = 0x03
|
|
};
|
|
|
|
enum sis630_revision_id {
|
|
SIS630A0 = 0x00, SIS630A1 = 0x01,
|
|
SIS630B0 = 0x10, SIS630B1 = 0x11
|
|
};
|
|
|
|
#define FDX_CAPABLE_DUPLEX_UNKNOWN 0
|
|
#define FDX_CAPABLE_HALF_SELECTED 1
|
|
#define FDX_CAPABLE_FULL_SELECTED 2
|
|
|
|
#define HW_SPEED_UNCONFIG 0
|
|
#define HW_SPEED_HOME 1
|
|
#define HW_SPEED_10_MBPS 10
|
|
#define HW_SPEED_100_MBPS 100
|
|
#define HW_SPEED_DEFAULT (HW_SPEED_100_MBPS)
|
|
|
|
#define CRC_SIZE 4
|
|
#define MAC_HEADER_SIZE 14
|
|
|
|
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
|
|
#define MAX_FRAME_SIZE (1518 + 4)
|
|
#else
|
|
#define MAX_FRAME_SIZE 1518
|
|
#endif /* CONFIG_VLAN_802_1Q */
|
|
|
|
#define TX_BUF_SIZE (MAX_FRAME_SIZE+18)
|
|
#define RX_BUF_SIZE (MAX_FRAME_SIZE+18)
|
|
|
|
#define NUM_TX_DESC 16 /* Number of Tx descriptor registers. */
|
|
#define NUM_RX_DESC 16 /* Number of Rx descriptor registers. */
|
|
#define TX_TOTAL_SIZE NUM_TX_DESC*sizeof(BufferDesc)
|
|
#define RX_TOTAL_SIZE NUM_RX_DESC*sizeof(BufferDesc)
|
|
|
|
/* PCI stuff, should be move to pci.h */
|
|
#define SIS630_VENDOR_ID 0x1039
|
|
#define SIS630_DEVICE_ID 0x0630
|