mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 16:30:52 +07:00
2e5a662de3
This augments the CBUS GPIO I2C driver to use GPIO descriptors for clock, sel and data. We drop the platform data that was only used for carrying GPIO numbers and use machine descriptor tables instead. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
284 lines
6.8 KiB
C
284 lines
6.8 KiB
C
/*
|
|
* CBUS I2C driver for Nokia Internet Tablets.
|
|
*
|
|
* Copyright (C) 2004-2010 Nokia Corporation
|
|
*
|
|
* Based on code written by Juha Yrjölä, David Weinehall, Mikko Ylinen and
|
|
* Felipe Balbi. Converted to I2C driver by Aaro Koskinen.
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General
|
|
* Public License. See the file "COPYING" in the main directory of this
|
|
* archive for more details.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
/*
|
|
* Bit counts are derived from Nokia implementation. These should be checked
|
|
* if other CBUS implementations appear.
|
|
*/
|
|
#define CBUS_ADDR_BITS 3
|
|
#define CBUS_REG_BITS 5
|
|
|
|
struct cbus_host {
|
|
spinlock_t lock; /* host lock */
|
|
struct device *dev;
|
|
struct gpio_desc *clk;
|
|
struct gpio_desc *dat;
|
|
struct gpio_desc *sel;
|
|
};
|
|
|
|
/**
|
|
* cbus_send_bit - sends one bit over the bus
|
|
* @host: the host we're using
|
|
* @bit: one bit of information to send
|
|
*/
|
|
static void cbus_send_bit(struct cbus_host *host, unsigned bit)
|
|
{
|
|
gpiod_set_value(host->dat, bit ? 1 : 0);
|
|
gpiod_set_value(host->clk, 1);
|
|
gpiod_set_value(host->clk, 0);
|
|
}
|
|
|
|
/**
|
|
* cbus_send_data - sends @len amount of data over the bus
|
|
* @host: the host we're using
|
|
* @data: the data to send
|
|
* @len: size of the transfer
|
|
*/
|
|
static void cbus_send_data(struct cbus_host *host, unsigned data, unsigned len)
|
|
{
|
|
int i;
|
|
|
|
for (i = len; i > 0; i--)
|
|
cbus_send_bit(host, data & (1 << (i - 1)));
|
|
}
|
|
|
|
/**
|
|
* cbus_receive_bit - receives one bit from the bus
|
|
* @host: the host we're using
|
|
*/
|
|
static int cbus_receive_bit(struct cbus_host *host)
|
|
{
|
|
int ret;
|
|
|
|
gpiod_set_value(host->clk, 1);
|
|
ret = gpiod_get_value(host->dat);
|
|
gpiod_set_value(host->clk, 0);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* cbus_receive_word - receives 16-bit word from the bus
|
|
* @host: the host we're using
|
|
*/
|
|
static int cbus_receive_word(struct cbus_host *host)
|
|
{
|
|
int ret = 0;
|
|
int i;
|
|
|
|
for (i = 16; i > 0; i--) {
|
|
int bit = cbus_receive_bit(host);
|
|
|
|
if (bit < 0)
|
|
return bit;
|
|
|
|
if (bit)
|
|
ret |= 1 << (i - 1);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* cbus_transfer - transfers data over the bus
|
|
* @host: the host we're using
|
|
* @rw: read/write flag
|
|
* @dev: device address
|
|
* @reg: register address
|
|
* @data: if @rw == I2C_SBUS_WRITE data to send otherwise 0
|
|
*/
|
|
static int cbus_transfer(struct cbus_host *host, char rw, unsigned dev,
|
|
unsigned reg, unsigned data)
|
|
{
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
/* We don't want interrupts disturbing our transfer */
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
/* Reset state and start of transfer, SEL stays down during transfer */
|
|
gpiod_set_value(host->sel, 0);
|
|
|
|
/* Set the DAT pin to output */
|
|
gpiod_direction_output(host->dat, 1);
|
|
|
|
/* Send the device address */
|
|
cbus_send_data(host, dev, CBUS_ADDR_BITS);
|
|
|
|
/* Send the rw flag */
|
|
cbus_send_bit(host, rw == I2C_SMBUS_READ);
|
|
|
|
/* Send the register address */
|
|
cbus_send_data(host, reg, CBUS_REG_BITS);
|
|
|
|
if (rw == I2C_SMBUS_WRITE) {
|
|
cbus_send_data(host, data, 16);
|
|
ret = 0;
|
|
} else {
|
|
ret = gpiod_direction_input(host->dat);
|
|
if (ret) {
|
|
dev_dbg(host->dev, "failed setting direction\n");
|
|
goto out;
|
|
}
|
|
gpiod_set_value(host->clk, 1);
|
|
|
|
ret = cbus_receive_word(host);
|
|
if (ret < 0) {
|
|
dev_dbg(host->dev, "failed receiving data\n");
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* Indicate end of transfer, SEL goes up until next transfer */
|
|
gpiod_set_value(host->sel, 1);
|
|
gpiod_set_value(host->clk, 1);
|
|
gpiod_set_value(host->clk, 0);
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int cbus_i2c_smbus_xfer(struct i2c_adapter *adapter,
|
|
u16 addr,
|
|
unsigned short flags,
|
|
char read_write,
|
|
u8 command,
|
|
int size,
|
|
union i2c_smbus_data *data)
|
|
{
|
|
struct cbus_host *chost = i2c_get_adapdata(adapter);
|
|
int ret;
|
|
|
|
if (size != I2C_SMBUS_WORD_DATA)
|
|
return -EINVAL;
|
|
|
|
ret = cbus_transfer(chost, read_write == I2C_SMBUS_READ, addr,
|
|
command, data->word);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (read_write == I2C_SMBUS_READ)
|
|
data->word = ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 cbus_i2c_func(struct i2c_adapter *adapter)
|
|
{
|
|
return I2C_FUNC_SMBUS_READ_WORD_DATA | I2C_FUNC_SMBUS_WRITE_WORD_DATA;
|
|
}
|
|
|
|
static const struct i2c_algorithm cbus_i2c_algo = {
|
|
.smbus_xfer = cbus_i2c_smbus_xfer,
|
|
.functionality = cbus_i2c_func,
|
|
};
|
|
|
|
static int cbus_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct i2c_adapter *adapter = platform_get_drvdata(pdev);
|
|
|
|
i2c_del_adapter(adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cbus_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct i2c_adapter *adapter;
|
|
struct cbus_host *chost;
|
|
|
|
adapter = devm_kzalloc(&pdev->dev, sizeof(struct i2c_adapter),
|
|
GFP_KERNEL);
|
|
if (!adapter)
|
|
return -ENOMEM;
|
|
|
|
chost = devm_kzalloc(&pdev->dev, sizeof(*chost), GFP_KERNEL);
|
|
if (!chost)
|
|
return -ENOMEM;
|
|
|
|
if (gpiod_count(&pdev->dev, NULL) != 3)
|
|
return -ENODEV;
|
|
chost->clk = devm_gpiod_get_index(&pdev->dev, NULL, 0, GPIOD_OUT_LOW);
|
|
if (IS_ERR(chost->clk))
|
|
return PTR_ERR(chost->clk);
|
|
chost->dat = devm_gpiod_get_index(&pdev->dev, NULL, 1, GPIOD_IN);
|
|
if (IS_ERR(chost->dat))
|
|
return PTR_ERR(chost->dat);
|
|
chost->sel = devm_gpiod_get_index(&pdev->dev, NULL, 2, GPIOD_OUT_HIGH);
|
|
if (IS_ERR(chost->sel))
|
|
return PTR_ERR(chost->sel);
|
|
gpiod_set_consumer_name(chost->clk, "CBUS clk");
|
|
gpiod_set_consumer_name(chost->dat, "CBUS dat");
|
|
gpiod_set_consumer_name(chost->sel, "CBUS sel");
|
|
|
|
adapter->owner = THIS_MODULE;
|
|
adapter->class = I2C_CLASS_HWMON;
|
|
adapter->dev.parent = &pdev->dev;
|
|
adapter->dev.of_node = pdev->dev.of_node;
|
|
adapter->nr = pdev->id;
|
|
adapter->timeout = HZ;
|
|
adapter->algo = &cbus_i2c_algo;
|
|
strlcpy(adapter->name, "CBUS I2C adapter", sizeof(adapter->name));
|
|
|
|
spin_lock_init(&chost->lock);
|
|
chost->dev = &pdev->dev;
|
|
|
|
i2c_set_adapdata(adapter, chost);
|
|
platform_set_drvdata(pdev, adapter);
|
|
|
|
return i2c_add_numbered_adapter(adapter);
|
|
}
|
|
|
|
#if defined(CONFIG_OF)
|
|
static const struct of_device_id i2c_cbus_dt_ids[] = {
|
|
{ .compatible = "i2c-cbus-gpio", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, i2c_cbus_dt_ids);
|
|
#endif
|
|
|
|
static struct platform_driver cbus_i2c_driver = {
|
|
.probe = cbus_i2c_probe,
|
|
.remove = cbus_i2c_remove,
|
|
.driver = {
|
|
.name = "i2c-cbus-gpio",
|
|
.of_match_table = of_match_ptr(i2c_cbus_dt_ids),
|
|
},
|
|
};
|
|
module_platform_driver(cbus_i2c_driver);
|
|
|
|
MODULE_ALIAS("platform:i2c-cbus-gpio");
|
|
MODULE_DESCRIPTION("CBUS I2C driver");
|
|
MODULE_AUTHOR("Juha Yrjölä");
|
|
MODULE_AUTHOR("David Weinehall");
|
|
MODULE_AUTHOR("Mikko Ylinen");
|
|
MODULE_AUTHOR("Felipe Balbi");
|
|
MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
|
|
MODULE_LICENSE("GPL");
|