mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-18 19:26:54 +07:00
13283626c8
The license text has been mangled at some point then copy pasted across multiple files. Restore it to what it should be. Note that this is not intended as a license change. Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Afzal Mohammed <afzal.mohd.ma@gmail.com> Acked-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
396 lines
9.5 KiB
Plaintext
396 lines
9.5 KiB
Plaintext
/*
|
|
* Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "imx6q.dtsi"
|
|
#include "imx6qdl-microsom.dtsi"
|
|
#include "imx6qdl-microsom-ar8035.dtsi"
|
|
|
|
/ {
|
|
model = "Auvidea H100";
|
|
compatible = "auvidea,h100", "fsl,imx6q";
|
|
|
|
aliases {
|
|
rtc0 = &rtc;
|
|
rtc1 = &snvs_rtc;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &uart2;
|
|
};
|
|
|
|
hdmi_osc: hdmi-osc {
|
|
compatible = "fixed-clock";
|
|
clock-output-names = "hdmi-osc";
|
|
clock-frequency = <27000000>;
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_h100_leds>;
|
|
|
|
led0: power {
|
|
label = "power";
|
|
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
|
|
default-state = "on";
|
|
};
|
|
|
|
led1: stream {
|
|
label = "stream";
|
|
gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led2: rec {
|
|
label = "rec";
|
|
gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3P3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
reg_hdmi: regulator-hdmi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
|
|
regulator-name = "V_HDMI";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_nvcc_sd2: regulator-nvcc-sd2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_h100_reg_nvcc_sd2>;
|
|
compatible = "regulator-gpio";
|
|
regulator-name = "NVCC_SD2";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-type = "voltage";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
|
|
states = <1800000 0x1
|
|
3300000 0x0>;
|
|
};
|
|
|
|
reg_usbh1_vbus: regulator-usb-h1-vbus {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
|
|
regulator-name = "USB_H1_VBUS";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
reg_usbotg_vbus: regulator-usb-otg-vbus {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
|
|
regulator-name = "USB_OTG_VBUS";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
sound-sgtl5000 {
|
|
compatible = "fsl,imx-audio-sgtl5000";
|
|
model = "H100 on-board codec";
|
|
audio-codec = <&sgtl5000>;
|
|
audio-routing =
|
|
"MIC_IN", "Mic Jack",
|
|
"Mic Jack", "Mic Bias",
|
|
"Headphone Jack", "HP_OUT";
|
|
mux-ext-port = <5>;
|
|
mux-int-port = <1>;
|
|
ssi-controller = <&ssi1>;
|
|
};
|
|
};
|
|
|
|
&audmux {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_h100_hdmi>;
|
|
ddc-i2c-bus = <&i2c2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_h100_i2c1>;
|
|
status = "okay";
|
|
|
|
eeprom: 24c02@51 {
|
|
compatible = "microchip,24c02", "at24";
|
|
reg = <0x51>;
|
|
};
|
|
|
|
rtc: pcf8523@68 {
|
|
compatible = "nxp,pcf8523";
|
|
reg = <0x68>;
|
|
};
|
|
|
|
sgtl5000: sgtl5000@0a {
|
|
compatible = "fsl,sgtl5000";
|
|
reg = <0x0a>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_h100_sgtl5000>;
|
|
clocks = <&clks IMX6QDL_CLK_CKO>;
|
|
VDDA-supply = <®_3p3v>;
|
|
VDDIO-supply = <®_3p3v>;
|
|
};
|
|
|
|
tc358743: tc358743@0f {
|
|
compatible = "toshiba,tc358743";
|
|
reg = <0x0f>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_h100_tc358743>;
|
|
clocks = <&hdmi_osc>;
|
|
clock-names = "refclk";
|
|
reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
|
|
/* IRQ has a wrong pull resistor which renders it useless */
|
|
|
|
port@0 {
|
|
tc358743_out: endpoint {
|
|
remote-endpoint = <&mipi_csi2_in>;
|
|
data-lanes = <1 2 3 4>;
|
|
clock-lanes = <0>;
|
|
clock-noncontinuous;
|
|
link-frequencies = /bits/ 64 <297000000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_h100_i2c2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
h100 {
|
|
pinctrl_h100_hdmi: h100-hdmi {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_h100_i2c1: h100-i2c1 {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
|
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_h100_i2c2: h100-i2c2 {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
|
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_h100_leds: pinctrl-h100-leds {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b0
|
|
MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0
|
|
MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_h100_reg_hdmi: h100-reg-hdmi {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_h100_reg_nvcc_sd2: h100-reg-nvcc-sd2 {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_h100_sgtl5000: h100-sgtl5000 {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
|
|
MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
|
|
MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
|
|
MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
|
|
MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_h100_tc358743: h100-tc358743 {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_h100_uart2: h100-uart2 {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
|
|
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_h100_usbotg_id: hummingboard-usbotg-id {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
|
|
>;
|
|
};
|
|
|
|
pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_h100_usdhc2: h100-usdhc2 {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071
|
|
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
|
|
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
|
|
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
|
|
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
|
|
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
|
|
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
|
|
>;
|
|
};
|
|
|
|
pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071
|
|
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
|
|
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
|
|
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
|
|
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
|
|
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
|
|
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
|
|
>;
|
|
};
|
|
|
|
pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071
|
|
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
|
|
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
|
|
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
|
|
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
|
|
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
|
|
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&mipi_csi {
|
|
status = "okay";
|
|
|
|
port@0 {
|
|
mipi_csi2_in: endpoint {
|
|
remote-endpoint = <&tc358743_out>;
|
|
data-lanes = <1 2 3 4>;
|
|
clock-lanes = <0>;
|
|
clock-noncontinuous;
|
|
link-frequencies = /bits/ 64 <297000000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&ssi1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_h100_uart2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh1 {
|
|
disable-over-current;
|
|
vbus-supply = <®_usbh1_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg {
|
|
disable-over-current;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_h100_usbotg_id>;
|
|
vbus-supply = <®_usbotg_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc2 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_h100_usdhc2>;
|
|
pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>;
|
|
pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>;
|
|
vmmc-supply = <®_3p3v>;
|
|
vqmmc-supply = <®_nvcc_sd2>;
|
|
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|