mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-12 16:36:48 +07:00
3603257553
Add i.MX6UL SNVS power key support. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
708 lines
19 KiB
Plaintext
708 lines
19 KiB
Plaintext
/*
|
|
* Copyright 2015 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/imx6ul-clock.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include "imx6ul-pinfunc.h"
|
|
#include "skeleton.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
ethernet0 = &fec1;
|
|
ethernet1 = &fec2;
|
|
gpio0 = &gpio1;
|
|
gpio1 = &gpio2;
|
|
gpio2 = &gpio3;
|
|
gpio3 = &gpio4;
|
|
gpio4 = &gpio5;
|
|
i2c0 = &i2c1;
|
|
i2c1 = &i2c2;
|
|
i2c2 = &i2c3;
|
|
i2c3 = &i2c4;
|
|
mmc0 = &usdhc1;
|
|
mmc1 = &usdhc2;
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
serial3 = &uart4;
|
|
serial4 = &uart5;
|
|
serial5 = &uart6;
|
|
serial6 = &uart7;
|
|
serial7 = &uart8;
|
|
spi0 = &ecspi1;
|
|
spi1 = &ecspi2;
|
|
spi2 = &ecspi3;
|
|
spi3 = &ecspi4;
|
|
usbphy0 = &usbphy1;
|
|
usbphy1 = &usbphy2;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
clock-latency = <61036>; /* two CLK32 periods */
|
|
operating-points = <
|
|
/* kHz uV */
|
|
528000 1250000
|
|
396000 1150000
|
|
198000 1150000
|
|
>;
|
|
fsl,soc-operating-points = <
|
|
/* KHz uV */
|
|
528000 1250000
|
|
396000 1150000
|
|
198000 1150000
|
|
>;
|
|
clocks = <&clks IMX6UL_CLK_ARM>,
|
|
<&clks IMX6UL_CLK_PLL2_BUS>,
|
|
<&clks IMX6UL_CLK_PLL2_PFD2>,
|
|
<&clks IMX6UL_CA7_SECONDARY_SEL>,
|
|
<&clks IMX6UL_CLK_STEP>,
|
|
<&clks IMX6UL_CLK_PLL1_SW>,
|
|
<&clks IMX6UL_CLK_PLL1_SYS>,
|
|
<&clks IMX6UL_PLL1_BYPASS>,
|
|
<&clks IMX6UL_CLK_PLL1>,
|
|
<&clks IMX6UL_PLL1_BYPASS_SRC>,
|
|
<&clks IMX6UL_CLK_OSC>;
|
|
clock-names = "arm", "pll2_bus", "pll2_pfd2_396m",
|
|
"secondary_sel", "step", "pll1_sw",
|
|
"pll1_sys", "pll1_bypass", "pll1",
|
|
"pll1_bypass_src", "osc";
|
|
arm-supply = <®_arm>;
|
|
soc-supply = <®_soc>;
|
|
};
|
|
};
|
|
|
|
intc: interrupt-controller@00a01000 {
|
|
compatible = "arm,cortex-a7-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x00a01000 0x1000>,
|
|
<0x00a02000 0x1000>,
|
|
<0x00a04000 0x2000>,
|
|
<0x00a06000 0x2000>;
|
|
};
|
|
|
|
ckil: clock-cli {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "ckil";
|
|
};
|
|
|
|
osc: clock-osc {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "osc";
|
|
};
|
|
|
|
ipp_di0: clock-di0 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <0>;
|
|
clock-output-names = "ipp_di0";
|
|
};
|
|
|
|
ipp_di1: clock-di1 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <0>;
|
|
clock-output-names = "ipp_di1";
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&gpc>;
|
|
ranges;
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a7-pmu";
|
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
aips1: aips-bus@02000000 {
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x02000000 0x100000>;
|
|
ranges;
|
|
|
|
spba-bus@02000000 {
|
|
compatible = "fsl,spba-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x02000000 0x40000>;
|
|
ranges;
|
|
|
|
ecspi1: ecspi@02008000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
|
|
reg = <0x02008000 0x4000>;
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_ECSPI1>,
|
|
<&clks IMX6UL_CLK_ECSPI1>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
ecspi2: ecspi@0200c000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
|
|
reg = <0x0200c000 0x4000>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_ECSPI2>,
|
|
<&clks IMX6UL_CLK_ECSPI2>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
ecspi3: ecspi@02010000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
|
|
reg = <0x02010000 0x4000>;
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_ECSPI3>,
|
|
<&clks IMX6UL_CLK_ECSPI3>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
ecspi4: ecspi@02014000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
|
|
reg = <0x02014000 0x4000>;
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_ECSPI4>,
|
|
<&clks IMX6UL_CLK_ECSPI4>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart7: serial@02018000 {
|
|
compatible = "fsl,imx6ul-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x02018000 0x4000>;
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_UART7_IPG>,
|
|
<&clks IMX6UL_CLK_UART7_SERIAL>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@02020000 {
|
|
compatible = "fsl,imx6ul-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x02020000 0x4000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_UART1_IPG>,
|
|
<&clks IMX6UL_CLK_UART1_SERIAL>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart8: serial@02024000 {
|
|
compatible = "fsl,imx6ul-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x02024000 0x4000>;
|
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_UART8_IPG>,
|
|
<&clks IMX6UL_CLK_UART8_SERIAL>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gpt1: gpt@02098000 {
|
|
compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
|
|
reg = <0x02098000 0x4000>;
|
|
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
|
|
<&clks IMX6UL_CLK_GPT1_SERIAL>;
|
|
clock-names = "ipg", "per";
|
|
};
|
|
|
|
gpio1: gpio@0209c000 {
|
|
compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
|
|
reg = <0x0209c000 0x4000>;
|
|
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio@020a0000 {
|
|
compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
|
|
reg = <0x020a0000 0x4000>;
|
|
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio3: gpio@020a4000 {
|
|
compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
|
|
reg = <0x020a4000 0x4000>;
|
|
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio4: gpio@020a8000 {
|
|
compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
|
|
reg = <0x020a8000 0x4000>;
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio5: gpio@020ac000 {
|
|
compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
|
|
reg = <0x020ac000 0x4000>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
fec2: ethernet@020b4000 {
|
|
compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
|
|
reg = <0x020b4000 0x4000>;
|
|
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_ENET>,
|
|
<&clks IMX6UL_CLK_ENET_AHB>,
|
|
<&clks IMX6UL_CLK_ENET_PTP>,
|
|
<&clks IMX6UL_CLK_ENET2_REF_125M>,
|
|
<&clks IMX6UL_CLK_ENET2_REF_125M>;
|
|
clock-names = "ipg", "ahb", "ptp",
|
|
"enet_clk_ref", "enet_out";
|
|
fsl,num-tx-queues=<1>;
|
|
fsl,num-rx-queues=<1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdog1: wdog@020bc000 {
|
|
compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
|
|
reg = <0x020bc000 0x4000>;
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_WDOG1>;
|
|
};
|
|
|
|
wdog2: wdog@020c0000 {
|
|
compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
|
|
reg = <0x020c0000 0x4000>;
|
|
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_WDOG2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
clks: ccm@020c4000 {
|
|
compatible = "fsl,imx6ul-ccm";
|
|
reg = <0x020c4000 0x4000>;
|
|
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
|
|
#clock-cells = <1>;
|
|
clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
|
|
clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
|
|
};
|
|
|
|
anatop: anatop@020c8000 {
|
|
compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
|
|
"syscon", "simple-bus";
|
|
reg = <0x020c8000 0x1000>;
|
|
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
reg_3p0: regulator-3p0@120 {
|
|
compatible = "fsl,anatop-regulator";
|
|
regulator-name = "vdd3p0";
|
|
regulator-min-microvolt = <2625000>;
|
|
regulator-max-microvolt = <3400000>;
|
|
anatop-reg-offset = <0x120>;
|
|
anatop-vol-bit-shift = <8>;
|
|
anatop-vol-bit-width = <5>;
|
|
anatop-min-bit-val = <0>;
|
|
anatop-min-voltage = <2625000>;
|
|
anatop-max-voltage = <3400000>;
|
|
anatop-enable-bit = <0>;
|
|
};
|
|
|
|
reg_arm: regulator-vddcore@140 {
|
|
compatible = "fsl,anatop-regulator";
|
|
regulator-name = "cpu";
|
|
regulator-min-microvolt = <725000>;
|
|
regulator-max-microvolt = <1450000>;
|
|
regulator-always-on;
|
|
anatop-reg-offset = <0x140>;
|
|
anatop-vol-bit-shift = <0>;
|
|
anatop-vol-bit-width = <5>;
|
|
anatop-delay-reg-offset = <0x170>;
|
|
anatop-delay-bit-shift = <24>;
|
|
anatop-delay-bit-width = <2>;
|
|
anatop-min-bit-val = <1>;
|
|
anatop-min-voltage = <725000>;
|
|
anatop-max-voltage = <1450000>;
|
|
};
|
|
|
|
reg_soc: regulator-vddsoc@140 {
|
|
compatible = "fsl,anatop-regulator";
|
|
regulator-name = "vddsoc";
|
|
regulator-min-microvolt = <725000>;
|
|
regulator-max-microvolt = <1450000>;
|
|
regulator-always-on;
|
|
anatop-reg-offset = <0x140>;
|
|
anatop-vol-bit-shift = <18>;
|
|
anatop-vol-bit-width = <5>;
|
|
anatop-delay-reg-offset = <0x170>;
|
|
anatop-delay-bit-shift = <28>;
|
|
anatop-delay-bit-width = <2>;
|
|
anatop-min-bit-val = <1>;
|
|
anatop-min-voltage = <725000>;
|
|
anatop-max-voltage = <1450000>;
|
|
};
|
|
};
|
|
|
|
usbphy1: usbphy@020c9000 {
|
|
compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
|
|
reg = <0x020c9000 0x1000>;
|
|
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_USBPHY1>;
|
|
phy-3p0-supply = <®_3p0>;
|
|
fsl,anatop = <&anatop>;
|
|
};
|
|
|
|
usbphy2: usbphy@020ca000 {
|
|
compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
|
|
reg = <0x020ca000 0x1000>;
|
|
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_USBPHY2>;
|
|
phy-3p0-supply = <®_3p0>;
|
|
fsl,anatop = <&anatop>;
|
|
};
|
|
|
|
snvs: snvs@020cc000 {
|
|
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
|
|
reg = <0x020cc000 0x4000>;
|
|
|
|
snvs_rtc: snvs-rtc-lp {
|
|
compatible = "fsl,sec-v4.0-mon-rtc-lp";
|
|
regmap = <&snvs>;
|
|
offset = <0x34>;
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
snvs_pwrkey: snvs-powerkey {
|
|
compatible = "fsl,sec-v4.0-pwrkey";
|
|
regmap = <&snvs>;
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
linux,keycode = <KEY_POWER>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
epit1: epit@020d0000 {
|
|
reg = <0x020d0000 0x4000>;
|
|
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
epit2: epit@020d4000 {
|
|
reg = <0x020d4000 0x4000>;
|
|
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
src: src@020d8000 {
|
|
compatible = "fsl,imx6ul-src", "fsl,imx51-src";
|
|
reg = <0x020d8000 0x4000>;
|
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
gpc: gpc@020dc000 {
|
|
compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
|
|
reg = <0x020dc000 0x4000>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-parent = <&intc>;
|
|
};
|
|
|
|
iomuxc: iomuxc@020e0000 {
|
|
compatible = "fsl,imx6ul-iomuxc";
|
|
reg = <0x020e0000 0x4000>;
|
|
};
|
|
|
|
gpr: iomuxc-gpr@020e4000 {
|
|
compatible = "fsl,imx6ul-iomuxc-gpr", "syscon";
|
|
reg = <0x020e4000 0x4000>;
|
|
};
|
|
|
|
gpt2: gpt@020e8000 {
|
|
compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
|
|
reg = <0x020e8000 0x4000>;
|
|
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_DUMMY>,
|
|
<&clks IMX6UL_CLK_DUMMY>;
|
|
clock-names = "ipg", "per";
|
|
};
|
|
|
|
pwm5: pwm@020f0000 {
|
|
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
|
|
reg = <0x020f0000 0x4000>;
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_DUMMY>,
|
|
<&clks IMX6UL_CLK_DUMMY>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <2>;
|
|
};
|
|
|
|
pwm6: pwm@020f4000 {
|
|
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
|
|
reg = <0x020f4000 0x4000>;
|
|
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_DUMMY>,
|
|
<&clks IMX6UL_CLK_DUMMY>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <2>;
|
|
};
|
|
|
|
pwm7: pwm@020f8000 {
|
|
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
|
|
reg = <0x020f8000 0x4000>;
|
|
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_DUMMY>,
|
|
<&clks IMX6UL_CLK_DUMMY>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <2>;
|
|
};
|
|
|
|
pwm8: pwm@020fc000 {
|
|
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
|
|
reg = <0x020fc000 0x4000>;
|
|
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_DUMMY>,
|
|
<&clks IMX6UL_CLK_DUMMY>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <2>;
|
|
};
|
|
};
|
|
|
|
aips2: aips-bus@02100000 {
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x02100000 0x100000>;
|
|
ranges;
|
|
|
|
usbotg1: usb@02184000 {
|
|
compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
|
|
reg = <0x02184000 0x200>;
|
|
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_USBOH3>;
|
|
fsl,usbphy = <&usbphy1>;
|
|
fsl,usbmisc = <&usbmisc 0>;
|
|
fsl,anatop = <&anatop>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbotg2: usb@02184200 {
|
|
compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
|
|
reg = <0x02184200 0x200>;
|
|
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_USBOH3>;
|
|
fsl,usbphy = <&usbphy2>;
|
|
fsl,usbmisc = <&usbmisc 1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbmisc: usbmisc@02184800 {
|
|
#index-cells = <1>;
|
|
compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
|
|
reg = <0x02184800 0x200>;
|
|
};
|
|
|
|
fec1: ethernet@02188000 {
|
|
compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
|
|
reg = <0x02188000 0x4000>;
|
|
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_ENET>,
|
|
<&clks IMX6UL_CLK_ENET_AHB>,
|
|
<&clks IMX6UL_CLK_ENET_PTP>,
|
|
<&clks IMX6UL_CLK_ENET_REF>,
|
|
<&clks IMX6UL_CLK_ENET_REF>;
|
|
clock-names = "ipg", "ahb", "ptp",
|
|
"enet_clk_ref", "enet_out";
|
|
fsl,num-tx-queues=<1>;
|
|
fsl,num-rx-queues=<1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usdhc1: usdhc@02190000 {
|
|
compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
|
|
reg = <0x02190000 0x4000>;
|
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_USDHC1>,
|
|
<&clks IMX6UL_CLK_USDHC1>,
|
|
<&clks IMX6UL_CLK_USDHC1>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usdhc2: usdhc@02194000 {
|
|
compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
|
|
reg = <0x02194000 0x4000>;
|
|
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_USDHC2>,
|
|
<&clks IMX6UL_CLK_USDHC2>,
|
|
<&clks IMX6UL_CLK_USDHC2>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@021a0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
|
|
reg = <0x021a0000 0x4000>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_I2C1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@021a4000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
|
|
reg = <0x021a4000 0x4000>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_I2C2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@021a8000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
|
|
reg = <0x021a8000 0x4000>;
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_I2C3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
qspi: qspi@021e0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
|
|
reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
|
|
reg-names = "QuadSPI", "QuadSPI-memory";
|
|
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_QSPI>,
|
|
<&clks IMX6UL_CLK_QSPI>;
|
|
clock-names = "qspi_en", "qspi";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@021e8000 {
|
|
compatible = "fsl,imx6ul-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x021e8000 0x4000>;
|
|
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_UART2_IPG>,
|
|
<&clks IMX6UL_CLK_UART2_SERIAL>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@021ec000 {
|
|
compatible = "fsl,imx6ul-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x021ec000 0x4000>;
|
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_UART3_IPG>,
|
|
<&clks IMX6UL_CLK_UART3_SERIAL>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@021f0000 {
|
|
compatible = "fsl,imx6ul-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x021f0000 0x4000>;
|
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_UART4_IPG>,
|
|
<&clks IMX6UL_CLK_UART4_SERIAL>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart5: serial@021f4000 {
|
|
compatible = "fsl,imx6ul-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x021f4000 0x4000>;
|
|
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_UART5_IPG>,
|
|
<&clks IMX6UL_CLK_UART5_SERIAL>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@021f8000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
|
|
reg = <0x021f8000 0x4000>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_I2C4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart6: serial@021fc000 {
|
|
compatible = "fsl,imx6ul-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x021fc000 0x4000>;
|
|
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6UL_CLK_UART6_IPG>,
|
|
<&clks IMX6UL_CLK_UART6_SERIAL>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
};
|