mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 13:32:50 +07:00
9671f09921
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Lucas Tavares <lucaskt@linux.vnet.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Tony Prisk <linux@prisktech.co.nz> Acked-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
937 lines
23 KiB
C
937 lines
23 KiB
C
/*
|
|
* Blackfin On-Chip Sport Emulated UART Driver
|
|
*
|
|
* Copyright 2006-2009 Analog Devices Inc.
|
|
*
|
|
* Enter bugs at http://blackfin.uclinux.org/
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
/*
|
|
* This driver and the hardware supported are in term of EE-191 of ADI.
|
|
* http://www.analog.com/static/imported-files/application_notes/EE191.pdf
|
|
* This application note describe how to implement a UART on a Sharc DSP,
|
|
* but this driver is implemented on Blackfin Processor.
|
|
* Transmit Frame Sync is not used by this driver to transfer data out.
|
|
*/
|
|
|
|
/* #define DEBUG */
|
|
|
|
#define DRV_NAME "bfin-sport-uart"
|
|
#define DEVICE_NAME "ttySS"
|
|
#define pr_fmt(fmt) DRV_NAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/io.h>
|
|
#include <linux/init.h>
|
|
#include <linux/console.h>
|
|
#include <linux/sysrq.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/serial_core.h>
|
|
|
|
#include <asm/bfin_sport.h>
|
|
#include <asm/delay.h>
|
|
#include <asm/portmux.h>
|
|
|
|
#include "bfin_sport_uart.h"
|
|
|
|
struct sport_uart_port {
|
|
struct uart_port port;
|
|
int err_irq;
|
|
unsigned short csize;
|
|
unsigned short rxmask;
|
|
unsigned short txmask1;
|
|
unsigned short txmask2;
|
|
unsigned char stopb;
|
|
/* unsigned char parib; */
|
|
#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
|
|
int cts_pin;
|
|
int rts_pin;
|
|
#endif
|
|
};
|
|
|
|
static int sport_uart_tx_chars(struct sport_uart_port *up);
|
|
static void sport_stop_tx(struct uart_port *port);
|
|
|
|
static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value)
|
|
{
|
|
pr_debug("%s value:%x, mask1=0x%x, mask2=0x%x\n", __func__, value,
|
|
up->txmask1, up->txmask2);
|
|
|
|
/* Place Start and Stop bits */
|
|
__asm__ __volatile__ (
|
|
"%[val] <<= 1;"
|
|
"%[val] = %[val] & %[mask1];"
|
|
"%[val] = %[val] | %[mask2];"
|
|
: [val]"+d"(value)
|
|
: [mask1]"d"(up->txmask1), [mask2]"d"(up->txmask2)
|
|
: "ASTAT"
|
|
);
|
|
pr_debug("%s value:%x\n", __func__, value);
|
|
|
|
SPORT_PUT_TX(up, value);
|
|
}
|
|
|
|
static inline unsigned char rx_one_byte(struct sport_uart_port *up)
|
|
{
|
|
unsigned int value;
|
|
unsigned char extract;
|
|
u32 tmp_mask1, tmp_mask2, tmp_shift, tmp;
|
|
|
|
if ((up->csize + up->stopb) > 7)
|
|
value = SPORT_GET_RX32(up);
|
|
else
|
|
value = SPORT_GET_RX(up);
|
|
|
|
pr_debug("%s value:%x, cs=%d, mask=0x%x\n", __func__, value,
|
|
up->csize, up->rxmask);
|
|
|
|
/* Extract data */
|
|
__asm__ __volatile__ (
|
|
"%[extr] = 0;"
|
|
"%[mask1] = %[rxmask];"
|
|
"%[mask2] = 0x0200(Z);"
|
|
"%[shift] = 0;"
|
|
"LSETUP(.Lloop_s, .Lloop_e) LC0 = %[lc];"
|
|
".Lloop_s:"
|
|
"%[tmp] = extract(%[val], %[mask1].L)(Z);"
|
|
"%[tmp] <<= %[shift];"
|
|
"%[extr] = %[extr] | %[tmp];"
|
|
"%[mask1] = %[mask1] - %[mask2];"
|
|
".Lloop_e:"
|
|
"%[shift] += 1;"
|
|
: [extr]"=&d"(extract), [shift]"=&d"(tmp_shift), [tmp]"=&d"(tmp),
|
|
[mask1]"=&d"(tmp_mask1), [mask2]"=&d"(tmp_mask2)
|
|
: [val]"d"(value), [rxmask]"d"(up->rxmask), [lc]"a"(up->csize)
|
|
: "ASTAT", "LB0", "LC0", "LT0"
|
|
);
|
|
|
|
pr_debug(" extract:%x\n", extract);
|
|
return extract;
|
|
}
|
|
|
|
static int sport_uart_setup(struct sport_uart_port *up, int size, int baud_rate)
|
|
{
|
|
int tclkdiv, rclkdiv;
|
|
unsigned int sclk = get_sclk();
|
|
|
|
/* Set TCR1 and TCR2, TFSR is not enabled for uart */
|
|
SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK));
|
|
SPORT_PUT_TCR2(up, size + 1);
|
|
pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up));
|
|
|
|
/* Set RCR1 and RCR2 */
|
|
SPORT_PUT_RCR1(up, (RCKFE | LARFS | LRFS | RFSR | IRCLK));
|
|
SPORT_PUT_RCR2(up, (size + 1) * 2 - 1);
|
|
pr_debug("%s RCR1:%x, RCR2:%x\n", __func__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up));
|
|
|
|
tclkdiv = sclk / (2 * baud_rate) - 1;
|
|
/* The actual uart baud rate of devices vary between +/-2%. The sport
|
|
* RX sample rate should be faster than the double of the worst case,
|
|
* otherwise, wrong data are received. So, set sport RX clock to be
|
|
* 3% faster.
|
|
*/
|
|
rclkdiv = sclk / (2 * baud_rate * 2 * 97 / 100) - 1;
|
|
SPORT_PUT_TCLKDIV(up, tclkdiv);
|
|
SPORT_PUT_RCLKDIV(up, rclkdiv);
|
|
SSYNC();
|
|
pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, rclkdiv:%d\n",
|
|
__func__, sclk, baud_rate, tclkdiv, rclkdiv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id)
|
|
{
|
|
struct sport_uart_port *up = dev_id;
|
|
struct tty_struct *tty = up->port.state->port.tty;
|
|
unsigned int ch;
|
|
|
|
spin_lock(&up->port.lock);
|
|
|
|
while (SPORT_GET_STAT(up) & RXNE) {
|
|
ch = rx_one_byte(up);
|
|
up->port.icount.rx++;
|
|
|
|
if (!uart_handle_sysrq_char(&up->port, ch))
|
|
tty_insert_flip_char(tty, ch, TTY_NORMAL);
|
|
}
|
|
tty_flip_buffer_push(tty);
|
|
|
|
spin_unlock(&up->port.lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t sport_uart_tx_irq(int irq, void *dev_id)
|
|
{
|
|
struct sport_uart_port *up = dev_id;
|
|
|
|
spin_lock(&up->port.lock);
|
|
sport_uart_tx_chars(up);
|
|
spin_unlock(&up->port.lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t sport_uart_err_irq(int irq, void *dev_id)
|
|
{
|
|
struct sport_uart_port *up = dev_id;
|
|
struct tty_struct *tty = up->port.state->port.tty;
|
|
unsigned int stat = SPORT_GET_STAT(up);
|
|
|
|
spin_lock(&up->port.lock);
|
|
|
|
/* Overflow in RX FIFO */
|
|
if (stat & ROVF) {
|
|
up->port.icount.overrun++;
|
|
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
|
|
SPORT_PUT_STAT(up, ROVF); /* Clear ROVF bit */
|
|
}
|
|
/* These should not happen */
|
|
if (stat & (TOVF | TUVF | RUVF)) {
|
|
pr_err("SPORT Error:%s %s %s\n",
|
|
(stat & TOVF) ? "TX overflow" : "",
|
|
(stat & TUVF) ? "TX underflow" : "",
|
|
(stat & RUVF) ? "RX underflow" : "");
|
|
SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN);
|
|
SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN);
|
|
}
|
|
SSYNC();
|
|
|
|
spin_unlock(&up->port.lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
|
|
static unsigned int sport_get_mctrl(struct uart_port *port)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
if (up->cts_pin < 0)
|
|
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
|
|
|
|
/* CTS PIN is negative assertive. */
|
|
if (SPORT_UART_GET_CTS(up))
|
|
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
|
|
else
|
|
return TIOCM_DSR | TIOCM_CAR;
|
|
}
|
|
|
|
static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
if (up->rts_pin < 0)
|
|
return;
|
|
|
|
/* RTS PIN is negative assertive. */
|
|
if (mctrl & TIOCM_RTS)
|
|
SPORT_UART_ENABLE_RTS(up);
|
|
else
|
|
SPORT_UART_DISABLE_RTS(up);
|
|
}
|
|
|
|
/*
|
|
* Handle any change of modem status signal.
|
|
*/
|
|
static irqreturn_t sport_mctrl_cts_int(int irq, void *dev_id)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)dev_id;
|
|
unsigned int status;
|
|
|
|
status = sport_get_mctrl(&up->port);
|
|
uart_handle_cts_change(&up->port, status & TIOCM_CTS);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
#else
|
|
static unsigned int sport_get_mctrl(struct uart_port *port)
|
|
{
|
|
pr_debug("%s enter\n", __func__);
|
|
return TIOCM_CTS | TIOCM_CD | TIOCM_DSR;
|
|
}
|
|
|
|
static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
pr_debug("%s enter\n", __func__);
|
|
}
|
|
#endif
|
|
|
|
/* Reqeust IRQ, Setup clock */
|
|
static int sport_startup(struct uart_port *port)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
int ret;
|
|
|
|
pr_debug("%s enter\n", __func__);
|
|
ret = request_irq(up->port.irq, sport_uart_rx_irq, 0,
|
|
"SPORT_UART_RX", up);
|
|
if (ret) {
|
|
dev_err(port->dev, "unable to request SPORT RX interrupt\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = request_irq(up->port.irq+1, sport_uart_tx_irq, 0,
|
|
"SPORT_UART_TX", up);
|
|
if (ret) {
|
|
dev_err(port->dev, "unable to request SPORT TX interrupt\n");
|
|
goto fail1;
|
|
}
|
|
|
|
ret = request_irq(up->err_irq, sport_uart_err_irq, 0,
|
|
"SPORT_UART_STATUS", up);
|
|
if (ret) {
|
|
dev_err(port->dev, "unable to request SPORT status interrupt\n");
|
|
goto fail2;
|
|
}
|
|
|
|
#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
|
|
if (up->cts_pin >= 0) {
|
|
if (request_irq(gpio_to_irq(up->cts_pin),
|
|
sport_mctrl_cts_int,
|
|
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
|
|
0, "BFIN_SPORT_UART_CTS", up)) {
|
|
up->cts_pin = -1;
|
|
dev_info(port->dev, "Unable to attach BlackFin UART over SPORT CTS interrupt. So, disable it.\n");
|
|
}
|
|
}
|
|
if (up->rts_pin >= 0) {
|
|
if (gpio_request(up->rts_pin, DRV_NAME)) {
|
|
dev_info(port->dev, "fail to request RTS PIN at GPIO_%d\n", up->rts_pin);
|
|
up->rts_pin = -1;
|
|
} else
|
|
gpio_direction_output(up->rts_pin, 0);
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
fail2:
|
|
free_irq(up->port.irq+1, up);
|
|
fail1:
|
|
free_irq(up->port.irq, up);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* sport_uart_tx_chars
|
|
*
|
|
* ret 1 means need to enable sport.
|
|
* ret 0 means do nothing.
|
|
*/
|
|
static int sport_uart_tx_chars(struct sport_uart_port *up)
|
|
{
|
|
struct circ_buf *xmit = &up->port.state->xmit;
|
|
|
|
if (SPORT_GET_STAT(up) & TXF)
|
|
return 0;
|
|
|
|
if (up->port.x_char) {
|
|
tx_one_byte(up, up->port.x_char);
|
|
up->port.icount.tx++;
|
|
up->port.x_char = 0;
|
|
return 1;
|
|
}
|
|
|
|
if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
|
|
/* The waiting loop to stop SPORT TX from TX interrupt is
|
|
* too long. This may block SPORT RX interrupts and cause
|
|
* RX FIFO overflow. So, do stop sport TX only after the last
|
|
* char in TX FIFO is moved into the shift register.
|
|
*/
|
|
if (SPORT_GET_STAT(up) & TXHRE)
|
|
sport_stop_tx(&up->port);
|
|
return 0;
|
|
}
|
|
|
|
while(!(SPORT_GET_STAT(up) & TXF) && !uart_circ_empty(xmit)) {
|
|
tx_one_byte(up, xmit->buf[xmit->tail]);
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1);
|
|
up->port.icount.tx++;
|
|
}
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(&up->port);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static unsigned int sport_tx_empty(struct uart_port *port)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
unsigned int stat;
|
|
|
|
stat = SPORT_GET_STAT(up);
|
|
pr_debug("%s stat:%04x\n", __func__, stat);
|
|
if (stat & TXHRE) {
|
|
return TIOCSER_TEMT;
|
|
} else
|
|
return 0;
|
|
}
|
|
|
|
static void sport_stop_tx(struct uart_port *port)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
|
|
pr_debug("%s enter\n", __func__);
|
|
|
|
if (!(SPORT_GET_TCR1(up) & TSPEN))
|
|
return;
|
|
|
|
/* Although the hold register is empty, last byte is still in shift
|
|
* register and not sent out yet. So, put a dummy data into TX FIFO.
|
|
* Then, sport tx stops when last byte is shift out and the dummy
|
|
* data is moved into the shift register.
|
|
*/
|
|
SPORT_PUT_TX(up, 0xffff);
|
|
while (!(SPORT_GET_STAT(up) & TXHRE))
|
|
cpu_relax();
|
|
|
|
SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN));
|
|
SSYNC();
|
|
|
|
return;
|
|
}
|
|
|
|
static void sport_start_tx(struct uart_port *port)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
|
|
pr_debug("%s enter\n", __func__);
|
|
|
|
/* Write data into SPORT FIFO before enable SPROT to transmit */
|
|
if (sport_uart_tx_chars(up)) {
|
|
/* Enable transmit, then an interrupt will generated */
|
|
SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN));
|
|
SSYNC();
|
|
}
|
|
|
|
pr_debug("%s exit\n", __func__);
|
|
}
|
|
|
|
static void sport_stop_rx(struct uart_port *port)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
|
|
pr_debug("%s enter\n", __func__);
|
|
/* Disable sport to stop rx */
|
|
SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN));
|
|
SSYNC();
|
|
}
|
|
|
|
static void sport_enable_ms(struct uart_port *port)
|
|
{
|
|
pr_debug("%s enter\n", __func__);
|
|
}
|
|
|
|
static void sport_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
pr_debug("%s enter\n", __func__);
|
|
}
|
|
|
|
static void sport_shutdown(struct uart_port *port)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
|
|
dev_dbg(port->dev, "%s enter\n", __func__);
|
|
|
|
/* Disable sport */
|
|
SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN));
|
|
SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN));
|
|
SSYNC();
|
|
|
|
free_irq(up->port.irq, up);
|
|
free_irq(up->port.irq+1, up);
|
|
free_irq(up->err_irq, up);
|
|
#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
|
|
if (up->cts_pin >= 0)
|
|
free_irq(gpio_to_irq(up->cts_pin), up);
|
|
if (up->rts_pin >= 0)
|
|
gpio_free(up->rts_pin);
|
|
#endif
|
|
}
|
|
|
|
static const char *sport_type(struct uart_port *port)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
|
|
pr_debug("%s enter\n", __func__);
|
|
return up->port.type == PORT_BFIN_SPORT ? "BFIN-SPORT-UART" : NULL;
|
|
}
|
|
|
|
static void sport_release_port(struct uart_port *port)
|
|
{
|
|
pr_debug("%s enter\n", __func__);
|
|
}
|
|
|
|
static int sport_request_port(struct uart_port *port)
|
|
{
|
|
pr_debug("%s enter\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
static void sport_config_port(struct uart_port *port, int flags)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
|
|
pr_debug("%s enter\n", __func__);
|
|
up->port.type = PORT_BFIN_SPORT;
|
|
}
|
|
|
|
static int sport_verify_port(struct uart_port *port, struct serial_struct *ser)
|
|
{
|
|
pr_debug("%s enter\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
static void sport_set_termios(struct uart_port *port,
|
|
struct ktermios *termios, struct ktermios *old)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag);
|
|
|
|
switch (termios->c_cflag & CSIZE) {
|
|
case CS8:
|
|
up->csize = 8;
|
|
break;
|
|
case CS7:
|
|
up->csize = 7;
|
|
break;
|
|
case CS6:
|
|
up->csize = 6;
|
|
break;
|
|
case CS5:
|
|
up->csize = 5;
|
|
break;
|
|
default:
|
|
pr_warning("requested word length not supported\n");
|
|
}
|
|
|
|
if (termios->c_cflag & CSTOPB) {
|
|
up->stopb = 1;
|
|
}
|
|
if (termios->c_cflag & PARENB) {
|
|
pr_warning("PAREN bits is not supported yet\n");
|
|
/* up->parib = 1; */
|
|
}
|
|
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
|
|
port->read_status_mask = 0;
|
|
|
|
/*
|
|
* Characters to ignore
|
|
*/
|
|
port->ignore_status_mask = 0;
|
|
|
|
/* RX extract mask */
|
|
up->rxmask = 0x01 | (((up->csize + up->stopb) * 2 - 1) << 0x8);
|
|
/* TX masks, 8 bit data and 1 bit stop for example:
|
|
* mask1 = b#0111111110
|
|
* mask2 = b#1000000000
|
|
*/
|
|
for (i = 0, up->txmask1 = 0; i < up->csize; i++)
|
|
up->txmask1 |= (1<<i);
|
|
up->txmask2 = (1<<i);
|
|
if (up->stopb) {
|
|
++i;
|
|
up->txmask2 |= (1<<i);
|
|
}
|
|
up->txmask1 <<= 1;
|
|
up->txmask2 <<= 1;
|
|
/* uart baud rate */
|
|
port->uartclk = uart_get_baud_rate(port, termios, old, 0, get_sclk()/16);
|
|
|
|
/* Disable UART */
|
|
SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN);
|
|
SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN);
|
|
|
|
sport_uart_setup(up, up->csize + up->stopb, port->uartclk);
|
|
|
|
/* driver TX line high after config, one dummy data is
|
|
* necessary to stop sport after shift one byte
|
|
*/
|
|
SPORT_PUT_TX(up, 0xffff);
|
|
SPORT_PUT_TX(up, 0xffff);
|
|
SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN));
|
|
SSYNC();
|
|
while (!(SPORT_GET_STAT(up) & TXHRE))
|
|
cpu_relax();
|
|
SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN);
|
|
SSYNC();
|
|
|
|
/* Port speed changed, update the per-port timeout. */
|
|
uart_update_timeout(port, termios->c_cflag, port->uartclk);
|
|
|
|
/* Enable sport rx */
|
|
SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) | RSPEN);
|
|
SSYNC();
|
|
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
}
|
|
|
|
struct uart_ops sport_uart_ops = {
|
|
.tx_empty = sport_tx_empty,
|
|
.set_mctrl = sport_set_mctrl,
|
|
.get_mctrl = sport_get_mctrl,
|
|
.stop_tx = sport_stop_tx,
|
|
.start_tx = sport_start_tx,
|
|
.stop_rx = sport_stop_rx,
|
|
.enable_ms = sport_enable_ms,
|
|
.break_ctl = sport_break_ctl,
|
|
.startup = sport_startup,
|
|
.shutdown = sport_shutdown,
|
|
.set_termios = sport_set_termios,
|
|
.type = sport_type,
|
|
.release_port = sport_release_port,
|
|
.request_port = sport_request_port,
|
|
.config_port = sport_config_port,
|
|
.verify_port = sport_verify_port,
|
|
};
|
|
|
|
#define BFIN_SPORT_UART_MAX_PORTS 4
|
|
|
|
static struct sport_uart_port *bfin_sport_uart_ports[BFIN_SPORT_UART_MAX_PORTS];
|
|
|
|
#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE
|
|
#define CLASS_BFIN_SPORT_CONSOLE "bfin-sport-console"
|
|
|
|
static int __init
|
|
sport_uart_console_setup(struct console *co, char *options)
|
|
{
|
|
struct sport_uart_port *up;
|
|
int baud = 57600;
|
|
int bits = 8;
|
|
int parity = 'n';
|
|
# ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
|
|
int flow = 'r';
|
|
# else
|
|
int flow = 'n';
|
|
# endif
|
|
|
|
/* Check whether an invalid uart number has been specified */
|
|
if (co->index < 0 || co->index >= BFIN_SPORT_UART_MAX_PORTS)
|
|
return -ENODEV;
|
|
|
|
up = bfin_sport_uart_ports[co->index];
|
|
if (!up)
|
|
return -ENODEV;
|
|
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
|
|
return uart_set_options(&up->port, co, baud, parity, bits, flow);
|
|
}
|
|
|
|
static void sport_uart_console_putchar(struct uart_port *port, int ch)
|
|
{
|
|
struct sport_uart_port *up = (struct sport_uart_port *)port;
|
|
|
|
while (SPORT_GET_STAT(up) & TXF)
|
|
barrier();
|
|
|
|
tx_one_byte(up, ch);
|
|
}
|
|
|
|
/*
|
|
* Interrupts are disabled on entering
|
|
*/
|
|
static void
|
|
sport_uart_console_write(struct console *co, const char *s, unsigned int count)
|
|
{
|
|
struct sport_uart_port *up = bfin_sport_uart_ports[co->index];
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
|
|
if (SPORT_GET_TCR1(up) & TSPEN)
|
|
uart_console_write(&up->port, s, count, sport_uart_console_putchar);
|
|
else {
|
|
/* dummy data to start sport */
|
|
while (SPORT_GET_STAT(up) & TXF)
|
|
barrier();
|
|
SPORT_PUT_TX(up, 0xffff);
|
|
/* Enable transmit, then an interrupt will generated */
|
|
SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN));
|
|
SSYNC();
|
|
|
|
uart_console_write(&up->port, s, count, sport_uart_console_putchar);
|
|
|
|
/* Although the hold register is empty, last byte is still in shift
|
|
* register and not sent out yet. So, put a dummy data into TX FIFO.
|
|
* Then, sport tx stops when last byte is shift out and the dummy
|
|
* data is moved into the shift register.
|
|
*/
|
|
while (SPORT_GET_STAT(up) & TXF)
|
|
barrier();
|
|
SPORT_PUT_TX(up, 0xffff);
|
|
while (!(SPORT_GET_STAT(up) & TXHRE))
|
|
barrier();
|
|
|
|
/* Stop sport tx transfer */
|
|
SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN));
|
|
SSYNC();
|
|
}
|
|
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
}
|
|
|
|
static struct uart_driver sport_uart_reg;
|
|
|
|
static struct console sport_uart_console = {
|
|
.name = DEVICE_NAME,
|
|
.write = sport_uart_console_write,
|
|
.device = uart_console_device,
|
|
.setup = sport_uart_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
.data = &sport_uart_reg,
|
|
};
|
|
|
|
#define SPORT_UART_CONSOLE (&sport_uart_console)
|
|
#else
|
|
#define SPORT_UART_CONSOLE NULL
|
|
#endif /* CONFIG_SERIAL_BFIN_SPORT_CONSOLE */
|
|
|
|
|
|
static struct uart_driver sport_uart_reg = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = DRV_NAME,
|
|
.dev_name = DEVICE_NAME,
|
|
.major = 204,
|
|
.minor = 84,
|
|
.nr = BFIN_SPORT_UART_MAX_PORTS,
|
|
.cons = SPORT_UART_CONSOLE,
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
static int sport_uart_suspend(struct device *dev)
|
|
{
|
|
struct sport_uart_port *sport = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(dev, "%s enter\n", __func__);
|
|
if (sport)
|
|
uart_suspend_port(&sport_uart_reg, &sport->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sport_uart_resume(struct device *dev)
|
|
{
|
|
struct sport_uart_port *sport = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(dev, "%s enter\n", __func__);
|
|
if (sport)
|
|
uart_resume_port(&sport_uart_reg, &sport->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct dev_pm_ops bfin_sport_uart_dev_pm_ops = {
|
|
.suspend = sport_uart_suspend,
|
|
.resume = sport_uart_resume,
|
|
};
|
|
#endif
|
|
|
|
static int sport_uart_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
struct sport_uart_port *sport;
|
|
int ret = 0;
|
|
|
|
dev_dbg(&pdev->dev, "%s enter\n", __func__);
|
|
|
|
if (pdev->id < 0 || pdev->id >= BFIN_SPORT_UART_MAX_PORTS) {
|
|
dev_err(&pdev->dev, "Wrong sport uart platform device id.\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
if (bfin_sport_uart_ports[pdev->id] == NULL) {
|
|
bfin_sport_uart_ports[pdev->id] =
|
|
kzalloc(sizeof(struct sport_uart_port), GFP_KERNEL);
|
|
sport = bfin_sport_uart_ports[pdev->id];
|
|
if (!sport) {
|
|
dev_err(&pdev->dev,
|
|
"Fail to malloc sport_uart_port\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ret = peripheral_request_list(
|
|
(unsigned short *)pdev->dev.platform_data, DRV_NAME);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"Fail to request SPORT peripherals\n");
|
|
goto out_error_free_mem;
|
|
}
|
|
|
|
spin_lock_init(&sport->port.lock);
|
|
sport->port.fifosize = SPORT_TX_FIFO_SIZE,
|
|
sport->port.ops = &sport_uart_ops;
|
|
sport->port.line = pdev->id;
|
|
sport->port.iotype = UPIO_MEM;
|
|
sport->port.flags = UPF_BOOT_AUTOCONF;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (res == NULL) {
|
|
dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
|
|
ret = -ENOENT;
|
|
goto out_error_free_peripherals;
|
|
}
|
|
|
|
sport->port.membase = ioremap(res->start, resource_size(res));
|
|
if (!sport->port.membase) {
|
|
dev_err(&pdev->dev, "Cannot map sport IO\n");
|
|
ret = -ENXIO;
|
|
goto out_error_free_peripherals;
|
|
}
|
|
sport->port.mapbase = res->start;
|
|
|
|
sport->port.irq = platform_get_irq(pdev, 0);
|
|
if ((int)sport->port.irq < 0) {
|
|
dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n");
|
|
ret = -ENOENT;
|
|
goto out_error_unmap;
|
|
}
|
|
|
|
sport->err_irq = platform_get_irq(pdev, 1);
|
|
if (sport->err_irq < 0) {
|
|
dev_err(&pdev->dev, "No sport status IRQ specified\n");
|
|
ret = -ENOENT;
|
|
goto out_error_unmap;
|
|
}
|
|
#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (res == NULL)
|
|
sport->cts_pin = -1;
|
|
else {
|
|
sport->cts_pin = res->start;
|
|
sport->port.flags |= ASYNC_CTS_FLOW;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 1);
|
|
if (res == NULL)
|
|
sport->rts_pin = -1;
|
|
else
|
|
sport->rts_pin = res->start;
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE
|
|
if (!is_early_platform_device(pdev)) {
|
|
#endif
|
|
sport = bfin_sport_uart_ports[pdev->id];
|
|
sport->port.dev = &pdev->dev;
|
|
dev_set_drvdata(&pdev->dev, sport);
|
|
ret = uart_add_one_port(&sport_uart_reg, &sport->port);
|
|
#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE
|
|
}
|
|
#endif
|
|
if (!ret)
|
|
return 0;
|
|
|
|
if (sport) {
|
|
out_error_unmap:
|
|
iounmap(sport->port.membase);
|
|
out_error_free_peripherals:
|
|
peripheral_free_list(
|
|
(unsigned short *)pdev->dev.platform_data);
|
|
out_error_free_mem:
|
|
kfree(sport);
|
|
bfin_sport_uart_ports[pdev->id] = NULL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit sport_uart_remove(struct platform_device *pdev)
|
|
{
|
|
struct sport_uart_port *sport = platform_get_drvdata(pdev);
|
|
|
|
dev_dbg(&pdev->dev, "%s enter\n", __func__);
|
|
dev_set_drvdata(&pdev->dev, NULL);
|
|
|
|
if (sport) {
|
|
uart_remove_one_port(&sport_uart_reg, &sport->port);
|
|
iounmap(sport->port.membase);
|
|
peripheral_free_list(
|
|
(unsigned short *)pdev->dev.platform_data);
|
|
kfree(sport);
|
|
bfin_sport_uart_ports[pdev->id] = NULL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sport_uart_driver = {
|
|
.probe = sport_uart_probe,
|
|
.remove = sport_uart_remove,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
#ifdef CONFIG_PM
|
|
.pm = &bfin_sport_uart_dev_pm_ops,
|
|
#endif
|
|
},
|
|
};
|
|
|
|
#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE
|
|
static __initdata struct early_platform_driver early_sport_uart_driver = {
|
|
.class_str = CLASS_BFIN_SPORT_CONSOLE,
|
|
.pdrv = &sport_uart_driver,
|
|
.requested_id = EARLY_PLATFORM_ID_UNSET,
|
|
};
|
|
|
|
static int __init sport_uart_rs_console_init(void)
|
|
{
|
|
early_platform_driver_register(&early_sport_uart_driver, DRV_NAME);
|
|
|
|
early_platform_driver_probe(CLASS_BFIN_SPORT_CONSOLE,
|
|
BFIN_SPORT_UART_MAX_PORTS, 0);
|
|
|
|
register_console(&sport_uart_console);
|
|
|
|
return 0;
|
|
}
|
|
console_initcall(sport_uart_rs_console_init);
|
|
#endif
|
|
|
|
static int __init sport_uart_init(void)
|
|
{
|
|
int ret;
|
|
|
|
pr_info("Blackfin uart over sport driver\n");
|
|
|
|
ret = uart_register_driver(&sport_uart_reg);
|
|
if (ret) {
|
|
pr_err("failed to register %s:%d\n",
|
|
sport_uart_reg.driver_name, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = platform_driver_register(&sport_uart_driver);
|
|
if (ret) {
|
|
pr_err("failed to register sport uart driver:%d\n", ret);
|
|
uart_unregister_driver(&sport_uart_reg);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
module_init(sport_uart_init);
|
|
|
|
static void __exit sport_uart_exit(void)
|
|
{
|
|
platform_driver_unregister(&sport_uart_driver);
|
|
uart_unregister_driver(&sport_uart_reg);
|
|
}
|
|
module_exit(sport_uart_exit);
|
|
|
|
MODULE_AUTHOR("Sonic Zhang, Roy Huang");
|
|
MODULE_DESCRIPTION("Blackfin serial over SPORT driver");
|
|
MODULE_LICENSE("GPL");
|