mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
d6152e6ec9
The following crash can be seen for setting CONFIG_DEBUG_TEST_DRIVER_REMOVE=y for DT FW (which some people still use): Hisilicon MBIGEN-V2 60080000.interrupt-controller: Failed to create mbi-gen irqdomain Hisilicon MBIGEN-V2: probe of 60080000.interrupt-controller failed with error -12 [...] Unable to handle kernel paging request at virtual address 0000000000005008 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000041fb9990000 [0000000000005008] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc6-00002-g3fc42638a506-dirty #1622 Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018 pstate: 40000085 (nZcv daIf -PAN -UAO) pc : mbigen_set_type+0x38/0x60 lr : __irq_set_trigger+0x6c/0x188 sp : ffff800014b4b400 x29: ffff800014b4b400 x28: 0000000000000007 x27: 0000000000000000 x26: 0000000000000000 x25: ffff041fd83bd0d4 x24: ffff041fd83bd188 x23: 0000000000000000 x22: ffff80001193ce00 x21: 0000000000000004 x20: 0000000000000000 x19: ffff041fd83bd000 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000119098c8 x14: ffff041fb94ec91c x13: ffff041fb94ec1a1 x12: 0000000000000030 x11: 0101010101010101 x10: 0000000000000040 x9 : 0000000000000000 x8 : ffff041fb98c6680 x7 : ffff800014b4b380 x6 : ffff041fd81636c8 x5 : 0000000000000000 x4 : 000000000000025f x3 : 0000000000005000 x2 : 0000000000005008 x1 : 0000000000000004 x0 : 0000000080000000 Call trace: mbigen_set_type+0x38/0x60 __setup_irq+0x744/0x900 request_threaded_irq+0xe0/0x198 pcie_pme_probe+0x98/0x118 pcie_port_probe_service+0x38/0x78 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 __device_attach_driver+0x90/0xb0 bus_for_each_drv+0x64/0xc8 __device_attach+0xd8/0x138 device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 device_add+0x4c4/0x770 device_register+0x1c/0x28 pcie_port_device_register+0x1e4/0x4f0 pcie_portdrv_probe+0x34/0xd8 local_pci_probe+0x3c/0xa0 pci_device_probe+0x128/0x1c0 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 __device_attach_driver+0x90/0xb0 bus_for_each_drv+0x64/0xc8 __device_attach+0xd8/0x138 device_attach+0x10/0x18 pci_bus_add_device+0x4c/0xb8 pci_bus_add_devices+0x38/0x88 pci_host_probe+0x3c/0xc0 pci_host_common_probe+0xf0/0x208 hisi_pcie_almost_ecam_probe+0x24/0x30 platform_drv_probe+0x50/0xa0 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 device_driver_attach+0x6c/0x90 __driver_attach+0x84/0xc8 bus_for_each_dev+0x74/0xc8 driver_attach+0x20/0x28 bus_add_driver+0x148/0x1f0 driver_register+0x60/0x110 __platform_driver_register+0x40/0x48 hisi_pcie_almost_ecam_driver_init+0x1c/0x24 The specific problem here is that the mbigen driver real probe has failed as the mbigen_of_create_domain()->of_platform_device_create() call fails, the reason for that being that we never destroyed the platform device created during the remove test dry run and there is some conflict. Since we generally would never want to unbind this driver, and to save adding a driver tear down path for that, just set the driver .suppress_bind_attrs member to avoid this possibility. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/1579196323-180137-1-git-send-email-john.garry@huawei.com
388 lines
9.2 KiB
C
388 lines
9.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2015 Hisilicon Limited, All Rights Reserved.
|
|
* Author: Jun Ma <majun258@huawei.com>
|
|
* Author: Yun Wu <wuyun.wu@huawei.com>
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irqchip.h>
|
|
#include <linux/module.h>
|
|
#include <linux/msi.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Interrupt numbers per mbigen node supported */
|
|
#define IRQS_PER_MBIGEN_NODE 128
|
|
|
|
/* 64 irqs (Pin0-pin63) are reserved for each mbigen chip */
|
|
#define RESERVED_IRQ_PER_MBIGEN_CHIP 64
|
|
|
|
/* The maximum IRQ pin number of mbigen chip(start from 0) */
|
|
#define MAXIMUM_IRQ_PIN_NUM 1407
|
|
|
|
/**
|
|
* In mbigen vector register
|
|
* bit[21:12]: event id value
|
|
* bit[11:0]: device id
|
|
*/
|
|
#define IRQ_EVENT_ID_SHIFT 12
|
|
#define IRQ_EVENT_ID_MASK 0x3ff
|
|
|
|
/* register range of each mbigen node */
|
|
#define MBIGEN_NODE_OFFSET 0x1000
|
|
|
|
/* offset of vector register in mbigen node */
|
|
#define REG_MBIGEN_VEC_OFFSET 0x200
|
|
|
|
/**
|
|
* offset of clear register in mbigen node
|
|
* This register is used to clear the status
|
|
* of interrupt
|
|
*/
|
|
#define REG_MBIGEN_CLEAR_OFFSET 0xa000
|
|
|
|
/**
|
|
* offset of interrupt type register
|
|
* This register is used to configure interrupt
|
|
* trigger type
|
|
*/
|
|
#define REG_MBIGEN_TYPE_OFFSET 0x0
|
|
|
|
/**
|
|
* struct mbigen_device - holds the information of mbigen device.
|
|
*
|
|
* @pdev: pointer to the platform device structure of mbigen chip.
|
|
* @base: mapped address of this mbigen chip.
|
|
*/
|
|
struct mbigen_device {
|
|
struct platform_device *pdev;
|
|
void __iomem *base;
|
|
};
|
|
|
|
static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq)
|
|
{
|
|
unsigned int nid, pin;
|
|
|
|
hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP;
|
|
nid = hwirq / IRQS_PER_MBIGEN_NODE + 1;
|
|
pin = hwirq % IRQS_PER_MBIGEN_NODE;
|
|
|
|
return pin * 4 + nid * MBIGEN_NODE_OFFSET
|
|
+ REG_MBIGEN_VEC_OFFSET;
|
|
}
|
|
|
|
static inline void get_mbigen_type_reg(irq_hw_number_t hwirq,
|
|
u32 *mask, u32 *addr)
|
|
{
|
|
unsigned int nid, irq_ofst, ofst;
|
|
|
|
hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP;
|
|
nid = hwirq / IRQS_PER_MBIGEN_NODE + 1;
|
|
irq_ofst = hwirq % IRQS_PER_MBIGEN_NODE;
|
|
|
|
*mask = 1 << (irq_ofst % 32);
|
|
ofst = irq_ofst / 32 * 4;
|
|
|
|
*addr = ofst + nid * MBIGEN_NODE_OFFSET
|
|
+ REG_MBIGEN_TYPE_OFFSET;
|
|
}
|
|
|
|
static inline void get_mbigen_clear_reg(irq_hw_number_t hwirq,
|
|
u32 *mask, u32 *addr)
|
|
{
|
|
unsigned int ofst = (hwirq / 32) * 4;
|
|
|
|
*mask = 1 << (hwirq % 32);
|
|
*addr = ofst + REG_MBIGEN_CLEAR_OFFSET;
|
|
}
|
|
|
|
static void mbigen_eoi_irq(struct irq_data *data)
|
|
{
|
|
void __iomem *base = data->chip_data;
|
|
u32 mask, addr;
|
|
|
|
get_mbigen_clear_reg(data->hwirq, &mask, &addr);
|
|
|
|
writel_relaxed(mask, base + addr);
|
|
|
|
irq_chip_eoi_parent(data);
|
|
}
|
|
|
|
static int mbigen_set_type(struct irq_data *data, unsigned int type)
|
|
{
|
|
void __iomem *base = data->chip_data;
|
|
u32 mask, addr, val;
|
|
|
|
if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
|
|
return -EINVAL;
|
|
|
|
get_mbigen_type_reg(data->hwirq, &mask, &addr);
|
|
|
|
val = readl_relaxed(base + addr);
|
|
|
|
if (type == IRQ_TYPE_LEVEL_HIGH)
|
|
val |= mask;
|
|
else
|
|
val &= ~mask;
|
|
|
|
writel_relaxed(val, base + addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip mbigen_irq_chip = {
|
|
.name = "mbigen-v2",
|
|
.irq_mask = irq_chip_mask_parent,
|
|
.irq_unmask = irq_chip_unmask_parent,
|
|
.irq_eoi = mbigen_eoi_irq,
|
|
.irq_set_type = mbigen_set_type,
|
|
.irq_set_affinity = irq_chip_set_affinity_parent,
|
|
};
|
|
|
|
static void mbigen_write_msg(struct msi_desc *desc, struct msi_msg *msg)
|
|
{
|
|
struct irq_data *d = irq_get_irq_data(desc->irq);
|
|
void __iomem *base = d->chip_data;
|
|
u32 val;
|
|
|
|
if (!msg->address_lo && !msg->address_hi)
|
|
return;
|
|
|
|
base += get_mbigen_vec_reg(d->hwirq);
|
|
val = readl_relaxed(base);
|
|
|
|
val &= ~(IRQ_EVENT_ID_MASK << IRQ_EVENT_ID_SHIFT);
|
|
val |= (msg->data << IRQ_EVENT_ID_SHIFT);
|
|
|
|
/* The address of doorbell is encoded in mbigen register by default
|
|
* So,we don't need to program the doorbell address at here
|
|
*/
|
|
writel_relaxed(val, base);
|
|
}
|
|
|
|
static int mbigen_domain_translate(struct irq_domain *d,
|
|
struct irq_fwspec *fwspec,
|
|
unsigned long *hwirq,
|
|
unsigned int *type)
|
|
{
|
|
if (is_of_node(fwspec->fwnode) || is_acpi_device_node(fwspec->fwnode)) {
|
|
if (fwspec->param_count != 2)
|
|
return -EINVAL;
|
|
|
|
if ((fwspec->param[0] > MAXIMUM_IRQ_PIN_NUM) ||
|
|
(fwspec->param[0] < RESERVED_IRQ_PER_MBIGEN_CHIP))
|
|
return -EINVAL;
|
|
else
|
|
*hwirq = fwspec->param[0];
|
|
|
|
/* If there is no valid irq type, just use the default type */
|
|
if ((fwspec->param[1] == IRQ_TYPE_EDGE_RISING) ||
|
|
(fwspec->param[1] == IRQ_TYPE_LEVEL_HIGH))
|
|
*type = fwspec->param[1];
|
|
else
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int mbigen_irq_domain_alloc(struct irq_domain *domain,
|
|
unsigned int virq,
|
|
unsigned int nr_irqs,
|
|
void *args)
|
|
{
|
|
struct irq_fwspec *fwspec = args;
|
|
irq_hw_number_t hwirq;
|
|
unsigned int type;
|
|
struct mbigen_device *mgn_chip;
|
|
int i, err;
|
|
|
|
err = mbigen_domain_translate(domain, fwspec, &hwirq, &type);
|
|
if (err)
|
|
return err;
|
|
|
|
err = platform_msi_domain_alloc(domain, virq, nr_irqs);
|
|
if (err)
|
|
return err;
|
|
|
|
mgn_chip = platform_msi_get_host_data(domain);
|
|
|
|
for (i = 0; i < nr_irqs; i++)
|
|
irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
|
|
&mbigen_irq_chip, mgn_chip->base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_domain_ops mbigen_domain_ops = {
|
|
.translate = mbigen_domain_translate,
|
|
.alloc = mbigen_irq_domain_alloc,
|
|
.free = irq_domain_free_irqs_common,
|
|
};
|
|
|
|
static int mbigen_of_create_domain(struct platform_device *pdev,
|
|
struct mbigen_device *mgn_chip)
|
|
{
|
|
struct device *parent;
|
|
struct platform_device *child;
|
|
struct irq_domain *domain;
|
|
struct device_node *np;
|
|
u32 num_pins;
|
|
|
|
for_each_child_of_node(pdev->dev.of_node, np) {
|
|
if (!of_property_read_bool(np, "interrupt-controller"))
|
|
continue;
|
|
|
|
parent = platform_bus_type.dev_root;
|
|
child = of_platform_device_create(np, NULL, parent);
|
|
if (!child) {
|
|
of_node_put(np);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (of_property_read_u32(child->dev.of_node, "num-pins",
|
|
&num_pins) < 0) {
|
|
dev_err(&pdev->dev, "No num-pins property\n");
|
|
of_node_put(np);
|
|
return -EINVAL;
|
|
}
|
|
|
|
domain = platform_msi_create_device_domain(&child->dev, num_pins,
|
|
mbigen_write_msg,
|
|
&mbigen_domain_ops,
|
|
mgn_chip);
|
|
if (!domain) {
|
|
of_node_put(np);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static int mbigen_acpi_create_domain(struct platform_device *pdev,
|
|
struct mbigen_device *mgn_chip)
|
|
{
|
|
struct irq_domain *domain;
|
|
u32 num_pins = 0;
|
|
int ret;
|
|
|
|
/*
|
|
* "num-pins" is the total number of interrupt pins implemented in
|
|
* this mbigen instance, and mbigen is an interrupt controller
|
|
* connected to ITS converting wired interrupts into MSI, so we
|
|
* use "num-pins" to alloc MSI vectors which are needed by client
|
|
* devices connected to it.
|
|
*
|
|
* Here is the DSDT device node used for mbigen in firmware:
|
|
* Device(MBI0) {
|
|
* Name(_HID, "HISI0152")
|
|
* Name(_UID, Zero)
|
|
* Name(_CRS, ResourceTemplate() {
|
|
* Memory32Fixed(ReadWrite, 0xa0080000, 0x10000)
|
|
* })
|
|
*
|
|
* Name(_DSD, Package () {
|
|
* ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
|
|
* Package () {
|
|
* Package () {"num-pins", 378}
|
|
* }
|
|
* })
|
|
* }
|
|
*/
|
|
ret = device_property_read_u32(&pdev->dev, "num-pins", &num_pins);
|
|
if (ret || num_pins == 0)
|
|
return -EINVAL;
|
|
|
|
domain = platform_msi_create_device_domain(&pdev->dev, num_pins,
|
|
mbigen_write_msg,
|
|
&mbigen_domain_ops,
|
|
mgn_chip);
|
|
if (!domain)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline int mbigen_acpi_create_domain(struct platform_device *pdev,
|
|
struct mbigen_device *mgn_chip)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif
|
|
|
|
static int mbigen_device_probe(struct platform_device *pdev)
|
|
{
|
|
struct mbigen_device *mgn_chip;
|
|
struct resource *res;
|
|
int err;
|
|
|
|
mgn_chip = devm_kzalloc(&pdev->dev, sizeof(*mgn_chip), GFP_KERNEL);
|
|
if (!mgn_chip)
|
|
return -ENOMEM;
|
|
|
|
mgn_chip->pdev = pdev;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -EINVAL;
|
|
|
|
mgn_chip->base = devm_ioremap(&pdev->dev, res->start,
|
|
resource_size(res));
|
|
if (!mgn_chip->base) {
|
|
dev_err(&pdev->dev, "failed to ioremap %pR\n", res);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node)
|
|
err = mbigen_of_create_domain(pdev, mgn_chip);
|
|
else if (ACPI_COMPANION(&pdev->dev))
|
|
err = mbigen_acpi_create_domain(pdev, mgn_chip);
|
|
else
|
|
err = -EINVAL;
|
|
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Failed to create mbi-gen irqdomain\n");
|
|
return err;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, mgn_chip);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id mbigen_of_match[] = {
|
|
{ .compatible = "hisilicon,mbigen-v2" },
|
|
{ /* END */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mbigen_of_match);
|
|
|
|
static const struct acpi_device_id mbigen_acpi_match[] = {
|
|
{ "HISI0152", 0 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, mbigen_acpi_match);
|
|
|
|
static struct platform_driver mbigen_platform_driver = {
|
|
.driver = {
|
|
.name = "Hisilicon MBIGEN-V2",
|
|
.of_match_table = mbigen_of_match,
|
|
.acpi_match_table = ACPI_PTR(mbigen_acpi_match),
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
.probe = mbigen_device_probe,
|
|
};
|
|
|
|
module_platform_driver(mbigen_platform_driver);
|
|
|
|
MODULE_AUTHOR("Jun Ma <majun258@huawei.com>");
|
|
MODULE_AUTHOR("Yun Wu <wuyun.wu@huawei.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Hisilicon MBI Generator driver");
|