mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-02 09:56:41 +07:00
93fff4ce19
When DT support for kirkwood was first introduced, there was no clock infrastructure. As a result, we had to manually pass the clock-frequency to the driver from the device node. Unfortunately, on kirkwood, with minimal config or all module configs, clock-frequency breaks booting because of_serial doesn't consume the gate_clk when clock-frequency is defined. The end result on kirkwood is that runit gets gated, and then the boot fails when the kernel tries to write to the serial port. Fix the issue by removing the clock-frequency parameter from all kirkwood dts files. Booted on dreamplug without earlyprintk and successfully logged in via ttyS0. Reported-by: Simon Baatz <gmbnomis@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
270 lines
5.0 KiB
Plaintext
270 lines
5.0 KiB
Plaintext
/dts-v1/;
|
|
|
|
/include/ "kirkwood.dtsi"
|
|
|
|
/ {
|
|
model = "ZyXEL NSA310";
|
|
compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x10000000>;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200";
|
|
};
|
|
|
|
ocp@f1000000 {
|
|
pinctrl: pinctrl@10000 {
|
|
pinctrl-0 = < &pmx_led_esata_green
|
|
&pmx_led_esata_red
|
|
&pmx_led_usb_green
|
|
&pmx_led_usb_red
|
|
&pmx_usb_power_off
|
|
&pmx_led_sys_green
|
|
&pmx_led_sys_red
|
|
&pmx_btn_reset
|
|
&pmx_btn_copy
|
|
&pmx_led_copy_green
|
|
&pmx_led_copy_red
|
|
&pmx_led_hdd_green
|
|
&pmx_led_hdd_red
|
|
&pmx_unknown
|
|
&pmx_btn_power
|
|
&pmx_pwr_off >;
|
|
pinctrl-names = "default";
|
|
|
|
pmx_led_esata_green: pmx-led-esata-green {
|
|
marvell,pins = "mpp12";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_esata_red: pmx-led-esata-red {
|
|
marvell,pins = "mpp13";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_usb_green: pmx-led-usb-green {
|
|
marvell,pins = "mpp15";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_usb_red: pmx-led-usb-red {
|
|
marvell,pins = "mpp16";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_usb_power_off: pmx-usb-power-off {
|
|
marvell,pins = "mpp21";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_sys_green: pmx-led-sys-green {
|
|
marvell,pins = "mpp28";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_sys_red: pmx-led-sys-red {
|
|
marvell,pins = "mpp29";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_btn_reset: pmx-btn-reset {
|
|
marvell,pins = "mpp36";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_btn_copy: pmx-btn-copy {
|
|
marvell,pins = "mpp37";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_copy_green: pmx-led-copy-green {
|
|
marvell,pins = "mpp39";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_copy_red: pmx-led-copy-red {
|
|
marvell,pins = "mpp40";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_hdd_green: pmx-led-hdd-green {
|
|
marvell,pins = "mpp41";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_hdd_red: pmx-led-hdd-red {
|
|
marvell,pins = "mpp42";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_unknown: pmx-unknown {
|
|
marvell,pins = "mpp44";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_btn_power: pmx-btn-power {
|
|
marvell,pins = "mpp46";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_pwr_off: pmx-pwr-off {
|
|
marvell,pins = "mpp48";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|
|
|
|
serial@12000 {
|
|
status = "ok";
|
|
};
|
|
|
|
sata@80000 {
|
|
status = "okay";
|
|
nr-ports = <2>;
|
|
};
|
|
|
|
i2c@11000 {
|
|
status = "okay";
|
|
|
|
adt7476: adt7476a@2e {
|
|
compatible = "adt7476";
|
|
reg = <0x2e>;
|
|
};
|
|
};
|
|
|
|
nand@3000000 {
|
|
status = "okay";
|
|
chip-delay = <35>;
|
|
|
|
partition@0 {
|
|
label = "uboot";
|
|
reg = <0x0000000 0x0100000>;
|
|
read-only;
|
|
};
|
|
partition@100000 {
|
|
label = "uboot_env";
|
|
reg = <0x0100000 0x0080000>;
|
|
};
|
|
partition@180000 {
|
|
label = "key_store";
|
|
reg = <0x0180000 0x0080000>;
|
|
};
|
|
partition@200000 {
|
|
label = "info";
|
|
reg = <0x0200000 0x0080000>;
|
|
};
|
|
partition@280000 {
|
|
label = "etc";
|
|
reg = <0x0280000 0x0a00000>;
|
|
};
|
|
partition@c80000 {
|
|
label = "kernel_1";
|
|
reg = <0x0c80000 0x0a00000>;
|
|
};
|
|
partition@1680000 {
|
|
label = "rootfs1";
|
|
reg = <0x1680000 0x2fc0000>;
|
|
};
|
|
partition@4640000 {
|
|
label = "kernel_2";
|
|
reg = <0x4640000 0x0a00000>;
|
|
};
|
|
partition@5040000 {
|
|
label = "rootfs2";
|
|
reg = <0x5040000 0x2fc0000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
button@1 {
|
|
label = "Power Button";
|
|
linux,code = <116>;
|
|
gpios = <&gpio1 14 0>;
|
|
};
|
|
button@2 {
|
|
label = "Copy Button";
|
|
linux,code = <133>;
|
|
gpios = <&gpio1 5 1>;
|
|
};
|
|
button@3 {
|
|
label = "Reset Button";
|
|
linux,code = <0x198>;
|
|
gpios = <&gpio1 4 1>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
|
|
green-sys {
|
|
label = "nsa310:green:sys";
|
|
gpios = <&gpio0 28 0>;
|
|
};
|
|
red-sys {
|
|
label = "nsa310:red:sys";
|
|
gpios = <&gpio0 29 0>;
|
|
};
|
|
green-hdd {
|
|
label = "nsa310:green:hdd";
|
|
gpios = <&gpio1 9 0>;
|
|
};
|
|
red-hdd {
|
|
label = "nsa310:red:hdd";
|
|
gpios = <&gpio1 10 0>;
|
|
};
|
|
green-esata {
|
|
label = "nsa310:green:esata";
|
|
gpios = <&gpio0 12 0>;
|
|
};
|
|
red-esata {
|
|
label = "nsa310:red:esata";
|
|
gpios = <&gpio0 13 0>;
|
|
};
|
|
green-usb {
|
|
label = "nsa310:green:usb";
|
|
gpios = <&gpio0 15 0>;
|
|
};
|
|
red-usb {
|
|
label = "nsa310:red:usb";
|
|
gpios = <&gpio0 16 0>;
|
|
};
|
|
green-copy {
|
|
label = "nsa310:green:copy";
|
|
gpios = <&gpio1 7 0>;
|
|
};
|
|
red-copy {
|
|
label = "nsa310:red:copy";
|
|
gpios = <&gpio1 8 0>;
|
|
};
|
|
};
|
|
|
|
gpio_poweroff {
|
|
compatible = "gpio-poweroff";
|
|
gpios = <&gpio1 16 0>;
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
usb0_power_off: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "USB Power Off";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio0 21 0>;
|
|
};
|
|
};
|
|
};
|