mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-20 05:57:02 +07:00
9b6cf1a012
Field names were shortened: "pkg" is now "pk", "core" is now "cr" Signed-off-by: Arun Thomas <arun.thomas@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
173 lines
6.3 KiB
Groff
173 lines
6.3 KiB
Groff
.TH TURBOSTAT 8
|
|
.SH NAME
|
|
turbostat \- Report processor frequency and idle statistics
|
|
.SH SYNOPSIS
|
|
.ft B
|
|
.B turbostat
|
|
.RB [ "\-v" ]
|
|
.RB [ "\-M MSR#" ]
|
|
.RB command
|
|
.br
|
|
.B turbostat
|
|
.RB [ "\-v" ]
|
|
.RB [ "\-M MSR#" ]
|
|
.RB [ "\-i interval_sec" ]
|
|
.SH DESCRIPTION
|
|
\fBturbostat \fP reports processor topology, frequency
|
|
and idle power state statistics on modern X86 processors.
|
|
Either \fBcommand\fP is forked and statistics are printed
|
|
upon its completion, or statistics are printed periodically.
|
|
|
|
\fBturbostat \fP
|
|
requires that the processor
|
|
supports an "invariant" TSC, plus the APERF and MPERF MSRs.
|
|
\fBturbostat \fP will report idle cpu power state residency
|
|
on processors that additionally support C-state residency counters.
|
|
|
|
.SS Options
|
|
The \fB-v\fP option increases verbosity.
|
|
.PP
|
|
The \fB-M MSR#\fP option dumps the specified MSR,
|
|
in addition to the usual frequency and idle statistics.
|
|
.PP
|
|
The \fB-i interval_sec\fP option prints statistics every \fiinterval_sec\fP seconds.
|
|
The default is 5 seconds.
|
|
.PP
|
|
The \fBcommand\fP parameter forks \fBcommand\fP and upon its exit,
|
|
displays the statistics gathered since it was forked.
|
|
.PP
|
|
.SH FIELD DESCRIPTIONS
|
|
.nf
|
|
\fBpk\fP processor package number.
|
|
\fBcr\fP processor core number.
|
|
\fBCPU\fP Linux CPU (logical processor) number.
|
|
\fB%c0\fP percent of the interval that the CPU retired instructions.
|
|
\fBGHz\fP average clock rate while the CPU was in c0 state.
|
|
\fBTSC\fP average GHz that the TSC ran during the entire interval.
|
|
\fB%c1, %c3, %c6\fP show the percentage residency in hardware core idle states.
|
|
\fB%pc3, %pc6\fP percentage residency in hardware package idle states.
|
|
.fi
|
|
.PP
|
|
.SH EXAMPLE
|
|
Without any parameters, turbostat prints out counters ever 5 seconds.
|
|
(override interval with "-i sec" option, or specify a command
|
|
for turbostat to fork).
|
|
|
|
The first row of statistics reflect the average for the entire system.
|
|
Subsequent rows show per-CPU statistics.
|
|
|
|
.nf
|
|
[root@x980]# ./turbostat
|
|
cr CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
|
|
0.04 1.62 3.38 0.11 0.00 99.85 0.00 95.07
|
|
0 0 0.04 1.62 3.38 0.06 0.00 99.90 0.00 95.07
|
|
0 6 0.02 1.62 3.38 0.08 0.00 99.90 0.00 95.07
|
|
1 2 0.10 1.62 3.38 0.29 0.00 99.61 0.00 95.07
|
|
1 8 0.11 1.62 3.38 0.28 0.00 99.61 0.00 95.07
|
|
2 4 0.01 1.62 3.38 0.01 0.00 99.98 0.00 95.07
|
|
2 10 0.01 1.61 3.38 0.02 0.00 99.98 0.00 95.07
|
|
8 1 0.07 1.62 3.38 0.15 0.00 99.78 0.00 95.07
|
|
8 7 0.03 1.62 3.38 0.19 0.00 99.78 0.00 95.07
|
|
9 3 0.01 1.62 3.38 0.02 0.00 99.98 0.00 95.07
|
|
9 9 0.01 1.62 3.38 0.02 0.00 99.98 0.00 95.07
|
|
10 5 0.01 1.62 3.38 0.13 0.00 99.86 0.00 95.07
|
|
10 11 0.08 1.62 3.38 0.05 0.00 99.86 0.00 95.07
|
|
.fi
|
|
.SH VERBOSE EXAMPLE
|
|
The "-v" option adds verbosity to the output:
|
|
|
|
.nf
|
|
GenuineIntel 11 CPUID levels; family:model:stepping 0x6:2c:2 (6:44:2)
|
|
12 * 133 = 1600 MHz max efficiency
|
|
25 * 133 = 3333 MHz TSC frequency
|
|
26 * 133 = 3467 MHz max turbo 4 active cores
|
|
26 * 133 = 3467 MHz max turbo 3 active cores
|
|
27 * 133 = 3600 MHz max turbo 2 active cores
|
|
27 * 133 = 3600 MHz max turbo 1 active cores
|
|
|
|
.fi
|
|
The \fBmax efficiency\fP frequency, a.k.a. Low Frequency Mode, is the frequency
|
|
available at the minimum package voltage. The \fBTSC frequency\fP is the nominal
|
|
maximum frequency of the processor if turbo-mode were not available. This frequency
|
|
should be sustainable on all CPUs indefinitely, given nominal power and cooling.
|
|
The remaining rows show what maximum turbo frequency is possible
|
|
depending on the number of idle cores. Note that this information is
|
|
not available on all processors.
|
|
.SH FORK EXAMPLE
|
|
If turbostat is invoked with a command, it will fork that command
|
|
and output the statistics gathered when the command exits.
|
|
eg. Here a cycle soaker is run on 1 CPU (see %c0) for a few seconds
|
|
until ^C while the other CPUs are mostly idle:
|
|
|
|
.nf
|
|
[root@x980 lenb]# ./turbostat cat /dev/zero > /dev/null
|
|
|
|
^Ccr CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
|
|
8.49 3.63 3.38 16.23 0.66 74.63 0.00 0.00
|
|
0 0 1.22 3.62 3.38 32.18 0.00 66.60 0.00 0.00
|
|
0 6 0.40 3.61 3.38 33.00 0.00 66.60 0.00 0.00
|
|
1 2 0.11 3.14 3.38 0.19 3.95 95.75 0.00 0.00
|
|
1 8 0.05 2.88 3.38 0.25 3.95 95.75 0.00 0.00
|
|
2 4 0.00 3.13 3.38 0.02 0.00 99.98 0.00 0.00
|
|
2 10 0.00 3.09 3.38 0.02 0.00 99.98 0.00 0.00
|
|
8 1 0.04 3.50 3.38 14.43 0.00 85.54 0.00 0.00
|
|
8 7 0.03 2.98 3.38 14.43 0.00 85.54 0.00 0.00
|
|
9 3 0.00 3.16 3.38 100.00 0.00 0.00 0.00 0.00
|
|
9 9 99.93 3.63 3.38 0.06 0.00 0.00 0.00 0.00
|
|
10 5 0.01 2.82 3.38 0.08 0.00 99.91 0.00 0.00
|
|
10 11 0.02 3.36 3.38 0.06 0.00 99.91 0.00 0.00
|
|
6.950866 sec
|
|
|
|
.fi
|
|
Above the cycle soaker drives cpu9 up 3.6 Ghz turbo limit
|
|
while the other processors are generally in various states of idle.
|
|
|
|
Note that cpu3 is an HT sibling sharing core9
|
|
with cpu9, and thus it is unable to get to an idle state
|
|
deeper than c1 while cpu9 is busy.
|
|
|
|
Note that turbostat reports average GHz of 3.61, while
|
|
the arithmetic average of the GHz column above is 3.24.
|
|
This is a weighted average, where the weight is %c0. ie. it is the total number of
|
|
un-halted cycles elapsed per time divided by the number of CPUs.
|
|
.SH NOTES
|
|
|
|
.B "turbostat "
|
|
must be run as root.
|
|
|
|
.B "turbostat "
|
|
reads hardware counters, but doesn't write them.
|
|
So it will not interfere with the OS or other programs, including
|
|
multiple invocations of itself.
|
|
|
|
\fBturbostat \fP
|
|
may work poorly on Linux-2.6.20 through 2.6.29,
|
|
as \fBacpi-cpufreq \fPperiodically cleared the APERF and MPERF
|
|
in those kernels.
|
|
|
|
The APERF, MPERF MSRs are defined to count non-halted cycles.
|
|
Although it is not guaranteed by the architecture, turbostat assumes
|
|
that they count at TSC rate, which is true on all processors tested to date.
|
|
|
|
.SH REFERENCES
|
|
"Intel® Turbo Boost Technology
|
|
in Intel® Core™ Microarchitecture (Nehalem) Based Processors"
|
|
http://download.intel.com/design/processor/applnots/320354.pdf
|
|
|
|
"Intel® 64 and IA-32 Architectures Software Developer's Manual
|
|
Volume 3B: System Programming Guide"
|
|
http://www.intel.com/products/processor/manuals/
|
|
|
|
.SH FILES
|
|
.ta
|
|
.nf
|
|
/dev/cpu/*/msr
|
|
.fi
|
|
|
|
.SH "SEE ALSO"
|
|
msr(4), vmstat(8)
|
|
.PP
|
|
.SH AUTHORS
|
|
.nf
|
|
Written by Len Brown <len.brown@intel.com>
|