linux_dsm_epyc7002/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
Fabio Estevam 8721610a6c ARM: dts: imx35: Fix memory node duplication
Boards based on imx35 have duplicate memory nodes:

- One coming from the board dts file: memory@

- One coming from the imx35.dtsi file.

Fix the duplication by removing the memory node from the dtsi file
and by adding 'device_type = "memory";' in the board dts.

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10 10:02:15 +08:00

98 lines
2.4 KiB
Plaintext

/*
* Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "imx35.dtsi"
/ {
model = "Eukrea CPUIMX35";
compatible = "eukrea,cpuimx35", "fsl,imx35";
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x8000000>; /* 128M */
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
pcf8563@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
tsc2007: tsc2007@48 {
compatible = "ti,tsc2007";
gpios = <&gpio3 2 0>;
interrupt-parent = <&gpio3>;
interrupts = <0x2 0x8>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc2007_1>;
reg = <0x48>;
ti,x-plate-ohms = <180>;
};
};
&iomuxc {
imx35-eukrea {
pinctrl_fec: fecgrp {
fsl,pins = <
MX35_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000
MX35_PAD_FEC_RX_CLK__FEC_RX_CLK 0x80000000
MX35_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
MX35_PAD_FEC_COL__FEC_COL 0x80000000
MX35_PAD_FEC_RDATA0__FEC_RDATA_0 0x80000000
MX35_PAD_FEC_TDATA0__FEC_TDATA_0 0x80000000
MX35_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
MX35_PAD_FEC_MDC__FEC_MDC 0x80000000
MX35_PAD_FEC_MDIO__FEC_MDIO 0x80000000
MX35_PAD_FEC_TX_ERR__FEC_TX_ERR 0x80000000
MX35_PAD_FEC_RX_ERR__FEC_RX_ERR 0x80000000
MX35_PAD_FEC_CRS__FEC_CRS 0x80000000
MX35_PAD_FEC_RDATA1__FEC_RDATA_1 0x80000000
MX35_PAD_FEC_TDATA1__FEC_TDATA_1 0x80000000
MX35_PAD_FEC_RDATA2__FEC_RDATA_2 0x80000000
MX35_PAD_FEC_TDATA2__FEC_TDATA_2 0x80000000
MX35_PAD_FEC_RDATA3__FEC_RDATA_3 0x80000000
MX35_PAD_FEC_TDATA3__FEC_TDATA_3 0x80000000
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX35_PAD_I2C1_CLK__I2C1_SCL 0x80000000
MX35_PAD_I2C1_DAT__I2C1_SDA 0x80000000
>;
};
pinctrl_tsc2007_1: tsc2007grp-1 {
fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>;
};
};
};
&nfc {
nand-bus-width = <8>;
nand-ecc-mode = "hw";
nand-on-flash-bbt;
status = "okay";
};