linux_dsm_epyc7002/drivers/tty/serial
Marek Szyprowski 500fcc08a3 serial: samsung: Add missing checks for dma_map_single failure
This patch adds missing checks for dma_map_single() failure and proper error
reporting. Although this issue was harmless on ARM architecture, it is always
good to use the DMA mapping API in a proper way. This patch fixes the following
DMA API debug warning:

WARNING: CPU: 1 PID: 3785 at lib/dma-debug.c:1171 check_unmap+0x8a0/0xf28
dma-pl330 121a0000.pdma: DMA-API: device driver failed to check map error[device address=0x000000006e0f9000] [size=4096 bytes] [mapped as single]
Modules linked in:
CPU: 1 PID: 3785 Comm: (agetty) Tainted: G        W       4.11.0-rc1-00137-g07ca963-dirty #59
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c011aaa4>] (unwind_backtrace) from [<c01127c0>] (show_stack+0x20/0x24)
[<c01127c0>] (show_stack) from [<c06ba5d8>] (dump_stack+0x84/0xa0)
[<c06ba5d8>] (dump_stack) from [<c0139528>] (__warn+0x14c/0x180)
[<c0139528>] (__warn) from [<c01395a4>] (warn_slowpath_fmt+0x48/0x50)
[<c01395a4>] (warn_slowpath_fmt) from [<c072a114>] (check_unmap+0x8a0/0xf28)
[<c072a114>] (check_unmap) from [<c072a834>] (debug_dma_unmap_page+0x98/0xc8)
[<c072a834>] (debug_dma_unmap_page) from [<c0803874>] (s3c24xx_serial_shutdown+0x314/0x52c)
[<c0803874>] (s3c24xx_serial_shutdown) from [<c07f5124>] (uart_port_shutdown+0x54/0x88)
[<c07f5124>] (uart_port_shutdown) from [<c07f522c>] (uart_shutdown+0xd4/0x110)
[<c07f522c>] (uart_shutdown) from [<c07f6a8c>] (uart_hangup+0x9c/0x208)
[<c07f6a8c>] (uart_hangup) from [<c07c426c>] (__tty_hangup+0x49c/0x634)
[<c07c426c>] (__tty_hangup) from [<c07c78ac>] (tty_ioctl+0xc88/0x16e4)
[<c07c78ac>] (tty_ioctl) from [<c03b5f2c>] (do_vfs_ioctl+0xc4/0xd10)
[<c03b5f2c>] (do_vfs_ioctl) from [<c03b6bf4>] (SyS_ioctl+0x7c/0x8c)
[<c03b6bf4>] (SyS_ioctl) from [<c010b4a0>] (ret_fast_syscall+0x0/0x3c)

Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Fixes: 62c37eedb7 ("serial: samsung: add dma reqest/release functions")
CC: stable@vger.kernel.org # v4.10+
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08 18:58:52 +02:00
..
8250 Merge 4.11-rc5 into tty-next 2017-04-03 14:18:16 +02:00
cpm_uart tty: serial: cpm_uart: make use of for_each_node_by_type() 2017-02-03 10:12:16 +01:00
jsm tty: serial: jsm_tty: constify uart_ops structures 2016-09-02 15:01:16 +02:00
21285.c
altera_jtaguart.c serial: altera_jtaguart: add earlycon support 2017-03-17 14:14:00 +09:00
altera_uart.c serial: altera_uart: add earlycon support 2017-03-31 16:56:10 +02:00
amba-pl010.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
amba-pl011.c tty: amba-pl011: Fix spurious TX interrupts 2017-04-08 18:54:07 +02:00
amba-pl011.h tty: amba-pl011: clean up LCR register offsets 2015-12-13 19:59:48 -08:00
apbuart.c
apbuart.h
ar933x_uart.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
arc_uart.c serial/arc: constify uart_ops structures 2016-09-01 21:05:41 +02:00
atmel_serial.c Merge 4.11-rc5 into tty-next 2017-04-03 14:18:16 +02:00
atmel_serial.h tty/serial: atmel: move atmel_serial header into driver directory 2017-03-14 10:59:04 +08:00
bcm63xx_uart.c serial/bcm63xx_uart: constify uart_ops structures 2016-09-02 15:01:16 +02:00
bfin_sport_uart.c tty: serial: constify dev_pm_ops structures 2017-01-19 14:20:23 +01:00
bfin_sport_uart.h
bfin_uart.c serial:bfin-uart:Remove 'struct timeval' 2015-12-13 19:59:48 -08:00
clps711x.c serial: clps711x: Changing the compatibility string to match with the smallest supported chip 2016-07-06 17:38:16 +02:00
crisv10.c sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
crisv10.h
digicolor-usart.c tty/serial: digicolor: Fix bad usage of IS_ERR_VALUE 2016-02-14 17:39:36 -08:00
dz.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
dz.h
earlycon-arm-semihost.c tty/serial: mark __init early_smh_setup() static 2016-09-02 15:03:35 +02:00
earlycon.c ACPI: parse SPCR and enable matching console 2016-09-28 17:46:46 +02:00
efm32-uart.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
etraxfs-uart.c serial: etraxfs-uart: Fix crash 2015-11-20 16:19:54 -08:00
fsl_lpuart.c tty: serial: fsl_lpuart: lock port on console write 2017-03-31 16:56:10 +02:00
icom.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
icom.h
ifx6x60.c serial: ifx6x60: Free memory when probe fails 2016-11-10 14:50:46 +01:00
ifx6x60.h
imx.c serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off 2017-04-08 18:54:07 +02:00
ioc3_serial.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
ioc4_serial.c scripts/spelling.txt: add "comsume(r)" pattern and fix typo instances 2017-02-27 18:43:47 -08:00
ip22zilog.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
ip22zilog.h
Kconfig serial: altera_uart: add earlycon support 2017-03-31 16:56:10 +02:00
kgdb_nmi.c
kgdboc.c
lantiq.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
lpc32xx_hs.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
m32r_sio_reg.h
m32r_sio.c serial: m32r_sio: make it explicitly non-modular 2016-06-25 14:00:06 -07:00
Makefile tty: serial: Makefile: move kgdb to be initialized last 2016-10-27 16:27:24 +02:00
max310x.c serial: max310x: Add support for newer silicon revisions 2017-01-12 11:51:24 +01:00
max3100.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
mcf.c
men_z135_uart.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
meson_uart.c tty: serial: meson: allow baud-rates higher than 115200 2017-01-19 14:38:57 +01:00
mpc52xx_uart.c tty: serial: constify psc_ops structs 2016-02-06 22:31:47 -08:00
mps2-uart.c serial: mps2-uart: make driver explicitly non-modular 2016-06-25 14:01:57 -07:00
mpsc.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
msm_serial.c tty: serial: msm: Fix module autoload 2017-01-12 11:51:25 +01:00
mux.c parisc: serial/mux: Convert to uart_console_device instead of open-coded 2015-10-22 15:44:28 +02:00
mvebu-uart.c serial: mvebu-uart: free the IRQ in ->shutdown() 2016-06-25 14:00:06 -07:00
mxs-auart.c serial: mxs-auart: Fix baudrate calculation 2017-03-31 17:26:19 +02:00
netx-serial.c
omap-serial.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
pch_uart.c serial: pch_uart: add terminate entry for dmi_system_id tables 2016-10-27 16:01:31 +02:00
pic32_uart.c serial: pic32_uart: Fix 'request_irq' and 'free_irq' inconsistancy 2017-01-12 11:51:24 +01:00
pic32_uart.h serial: pic32_uart: Add PIC32 UART driver 2016-05-13 14:01:56 +02:00
pmac_zilog.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
pmac_zilog.h
pnx8xxx_uart.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
pxa.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
rp2.c
sa1100.c
samsung.c serial: samsung: Add missing checks for dma_map_single failure 2017-04-08 18:58:52 +02:00
samsung.h serial: samsung: Simplify DMA engine initialization code 2017-01-12 11:51:24 +01:00
sb1250-duart.c drivers: convert sbd_duart.map_guard from atomic_t to refcount_t 2017-03-14 11:01:40 +08:00
sc16is7xx.c sched/headers: Prepare for new header dependencies before moving code to <uapi/linux/sched/types.h> 2017-03-02 08:42:27 +01:00
sccnxp.c
serial_core.c serial: core: Re-use struct uart_port {name} field 2017-04-08 18:51:57 +02:00
serial_ks8695.c serial: Fix ASYNC_* => UPF_* flags misuse 2016-01-28 14:17:42 -08:00
serial_mctrl_gpio.c serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct 2016-06-25 14:30:42 -07:00
serial_mctrl_gpio.h serial: mctrl_gpio: add modem control read routine 2016-06-25 14:30:42 -07:00
serial_txx9.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
serial-tegra.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sh-sci.c serial: sh-sci: Fix (AUTO)RTS in sci_init_pins() 2017-03-31 15:29:06 +02:00
sh-sci.h serial: sh-sci: consider DR (data ready) bit adequately 2017-02-03 10:14:10 +01:00
sirfsoc_uart.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sirfsoc_uart.h serial: sirf: make fifo functions static 2016-06-25 14:01:57 -07:00
sn_console.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sprd_serial.c serial: sprd: adjust TIMEOUT to a big value 2017-04-08 18:42:47 +02:00
st-asc.c serial: st-asc: Change default baudrate from 9600 to 115200 2017-03-31 15:29:05 +02:00
stm32-usart.c serial: stm32: mark symbols static where possible 2016-09-27 12:55:27 +02:00
stm32-usart.h serial: stm32: Fix comparisons with undefined register 2016-10-27 16:00:31 +02:00
suncore.c
sunhv.c sparc64: Send break twice from console to return to boot prom 2017-02-23 08:27:24 -08:00
sunsab.c
sunsab.h
sunsu.c serial: sunsu: Free memory when probe fails 2016-11-16 10:57:26 +01:00
sunzilog.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sunzilog.h
tilegx.c
timbuart.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
timbuart.h
uartlite.c uartlite: Adding a kernel parameter for the number of uartlites 2017-03-17 14:14:30 +09:00
ucc_uart.c QE-UART: add "fsl,t1040-ucc-uart" to of_device_id 2016-05-01 13:55:12 -07:00
vr41xx_siu.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
vt8500_serial.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
xilinx_uartps.c serial: xuartps: Enable clocks in the pm disable case also 2017-04-08 18:54:07 +02:00
zs.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
zs.h