AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-13 18:56:43 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
500abb6ccb
linux_dsm_epyc7002/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
Linus Walleij 3181788c3a ARM: nomadik: fix up double inversion in DT 
The GPIO pin connected to card detect was inverted twice: once by
the argument to the GPIO line itself where it was magically marked
as active low by the flag GPIO_ACTIVE_LOW (0x01) in the third cell,
and also marked active low AGAIN by explicitly stating
"cd-inverted" (a deprecated method).

After commit 78f87df2b4
"mmc: mmci: Use the common mmc DT parser" this results in the
line being inverted twice so it was effectively uninverted, while
the old code would not have this effect, instead disregarding the
flag on the GPIO line altogether, which is a bug. I admit the
semantics may be unclear but inverting twice is as good a
definition as any on how this should work.

So fix up the buggy device tree. Use proper #includes so the DTS
is clear and readable.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-30 12:47:17 -07:00

854 lines
19 KiB
Plaintext
Raw Blame History

/*
* Device Tree for the ST-Ericsson Nomadik 8815 STn8815 SoC
*/
#include <dt-bindings/gpio/gpio.h>
#include "skeleton.dtsi"
/ {
#address-cells = <1>;
#size-cells = <1>;
memory {
reg = <0x00000000 0x04000000>,
<0x08000000 0x04000000>;
};
L2: l2-cache {
compatible = "arm,l210-cache";
reg = <0x10210000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <30>;
cache-unified;
cache-level = <2>;
};
mtu0: mtu@101e2000 {
/* Nomadik system timer */
compatible = "st,nomadik-mtu";
reg = <0x101e2000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <4>;
clocks = <&timclk>, <&pclk>;
clock-names = "timclk", "apb_pclk";
};
mtu1: mtu@101e3000 {
/* Secondary timer */
reg = <0x101e3000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <5>;
clocks = <&timclk>, <&pclk>;
clock-names = "timclk", "apb_pclk";
};
gpio0: gpio@101e4000 {
compatible = "st,nomadik-gpio";
reg = <0x101e4000 0x80>;
interrupt-parent = <&vica>;
interrupts = <6>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <0>;
clocks = <&pclk>;
};
gpio1: gpio@101e5000 {
compatible = "st,nomadik-gpio";
reg = <0x101e5000 0x80>;
interrupt-parent = <&vica>;
interrupts = <7>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <1>;
clocks = <&pclk>;
};
gpio2: gpio@101e6000 {
compatible = "st,nomadik-gpio";
reg = <0x101e6000 0x80>;
interrupt-parent = <&vica>;
interrupts = <8>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <2>;
clocks = <&pclk>;
};
gpio3: gpio@101e7000 {
compatible = "st,nomadik-gpio";
reg = <0x101e7000 0x80>;
interrupt-parent = <&vica>;
interrupts = <9>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <3>;
clocks = <&pclk>;
};
pinctrl {
compatible = "stericsson,stn8815-pinctrl";
/* Pin configurations */
uart0 {
uart0_default_mux: uart0_mux {
u0_default_mux {
ste,function = "u0";
ste,pins = "u0_a_1";
};
};
};
uart1 {
uart1_default_mux: uart1_mux {
u1_default_mux {
ste,function = "u1";
ste,pins = "u1_a_1";
};
};
};
mmcsd {
mmcsd_default_mux: mmcsd_mux {
mmcsd_default_mux {
ste,function = "mmcsd";
ste,pins = "mmcsd_a_1";
};
};
mmcsd_default_mode: mmcsd_default {
mmcsd_default_cfg1 {
/* MCCLK */
ste,pins = "GPIO8_B10";
ste,output = <0>;
};
mmcsd_default_cfg2 {
/* MCCMDDIR, MCDAT0DIR, MCDAT31DIR */
ste,pins = "GPIO10_C11", "GPIO15_A12",
"GPIO16_C13";
ste,output = <1>;
};
mmcsd_default_cfg3 {
/* MCCMD, MCDAT3-0, MCMSFBCLK */
ste,pins = "GPIO9_A10", "GPIO11_B11",
"GPIO12_A11", "GPIO13_C12",
"GPIO14_B12", "GPIO24_C15";
ste,input = <1>;
};
};
};
i2c0 {
i2c0_default_mux: i2c0_mux {
i2c0_default_mux {
ste,function = "i2c0";
ste,pins = "i2c0_a_1";
};
};
i2c0_default_mode: i2c0_default {
i2c0_default_cfg {
ste,pins = "GPIO62_D3", "GPIO63_D2";
ste,input = <0>;
};
};
};
i2c1 {
i2c1_default_mux: i2c1_mux {
i2c1_default_mux {
ste,function = "i2c1";
ste,pins = "i2c1_a_1";
};
};
i2c1_default_mode: i2c1_default {
i2c1_default_cfg {
ste,pins = "GPIO53_L4", "GPIO54_L3";
ste,input = <0>;
};
};
};
i2c2 {
i2c2_default_mode: i2c2_default {
i2c2_default_cfg {
ste,pins = "GPIO73_C21", "GPIO74_C20";
ste,input = <0>;
};
};
};
};
src: src@101e0000 {
compatible = "stericsson,nomadik-src";
reg = <0x101e0000 0x1000>;
disable-sxtalo;
disable-mxtalo;
/*
* MXTAL "Main Chrystal" is a chrystal oscillator @19.2 MHz
* that is parent of TIMCLK, PLL1 and PLL2
*/
mxtal: mxtal@19.2M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <19200000>;
};
/*
* The 2.4 MHz TIMCLK reference clock is active at
* boot time, this is actually the MXTALCLK @19.2 MHz
* divided by 8. This clock is used by the timers and
* watchdog. See page 105 ff.
*/
timclk: timclk@2.4M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <8>;
clock-mult = <1>;
clocks = <&mxtal>;
};
/* PLL1 is locked to MXTALI and variable from 20.4 to 334 MHz */
pll1: pll1@0 {
#clock-cells = <0>;
compatible = "st,nomadik-pll-clock";
pll-id = <1>;
clocks = <&mxtal>;
};
/* HCLK divides the PLL1 with 1,2,3 or 4 */
hclk: hclk@0 {
#clock-cells = <0>;
compatible = "st,nomadik-hclk-clock";
clocks = <&pll1>;
};
/* The PCLK domain uses HCLK right off */
pclk: pclk@0 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <1>;
clocks = <&hclk>;
};
/* PLL2 is usually 864 MHz and divided into a few fixed rates */
pll2: pll2@0 {
#clock-cells = <0>;
compatible = "st,nomadik-pll-clock";
pll-id = <2>;
clocks = <&mxtal>;
};
clk216: clk216@216M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <4>;
clock-mult = <1>;
clocks = <&pll2>;
};
clk108: clk108@108M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <2>;
clock-mult = <1>;
clocks = <&clk216>;
};
clk72: clk72@72M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
/* The data sheet does not say how this is derived */
clock-div = <12>;
clock-mult = <1>;
clocks = <&pll2>;
};
clk48: clk48@48M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
/* The data sheet does not say how this is derived */
clock-div = <18>;
clock-mult = <1>;
clocks = <&pll2>;
};
clk27: clk27@27M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <4>;
clock-mult = <1>;
clocks = <&clk108>;
};
/* This apparently exists as well */
ulpiclk: ulpiclk@60M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <60000000>;
};
/*
* IP AMBA bus clocks, driving the bus side of the
* peripheral clocking, clock gates.
*/
hclkdma0: hclkdma0@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <0>;
clocks = <&hclk>;
};
hclksmc: hclksmc@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <1>;
clocks = <&hclk>;
};
hclksdram: hclksdram@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <2>;
clocks = <&hclk>;
};
hclkdma1: hclkdma1@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <3>;
clocks = <&hclk>;
};
hclkclcd: hclkclcd@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <4>;
clocks = <&hclk>;
};
pclkirda: pclkirda@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <5>;
clocks = <&pclk>;
};
pclkssp: pclkssp@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <6>;
clocks = <&pclk>;
};
pclkuart0: pclkuart0@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <7>;
clocks = <&pclk>;
};
pclksdi: pclksdi@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <8>;
clocks = <&pclk>;
};
pclki2c0: pclki2c0@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <9>;
clocks = <&pclk>;
};
pclki2c1: pclki2c1@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <10>;
clocks = <&pclk>;
};
pclkuart1: pclkuart1@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <11>;
clocks = <&pclk>;
};
pclkmsp0: pclkmsp0@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <12>;
clocks = <&pclk>;
};
hclkusb: hclkusb@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <13>;
clocks = <&hclk>;
};
hclkdif: hclkdif@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <14>;
clocks = <&hclk>;
};
hclksaa: hclksaa@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <15>;
clocks = <&hclk>;
};
hclksva: hclksva@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <16>;
clocks = <&hclk>;
};
pclkhsi: pclkhsi@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <17>;
clocks = <&pclk>;
};
pclkxti: pclkxti@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <18>;
clocks = <&pclk>;
};
pclkuart2: pclkuart2@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <19>;
clocks = <&pclk>;
};
pclkmsp1: pclkmsp1@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <20>;
clocks = <&pclk>;
};
pclkmsp2: pclkmsp2@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <21>;
clocks = <&pclk>;
};
pclkowm: pclkowm@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <22>;
clocks = <&pclk>;
};
hclkhpi: hclkhpi@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <23>;
clocks = <&hclk>;
};
pclkske: pclkske@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <24>;
clocks = <&pclk>;
};
pclkhsem: pclkhsem@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <25>;
clocks = <&pclk>;
};
hclk3d: hclk3d@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <26>;
clocks = <&hclk>;
};
hclkhash: hclkhash@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <27>;
clocks = <&hclk>;
};
hclkcryp: hclkcryp@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <28>;
clocks = <&hclk>;
};
pclkmshc: pclkmshc@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <29>;
clocks = <&pclk>;
};
hclkusbm: hclkusbm@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <30>;
clocks = <&hclk>;
};
hclkrng: hclkrng@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <31>;
clocks = <&hclk>;
};
/* IP kernel clocks */
clcdclk: clcdclk@0 {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <36>;
clocks = <&clk72 &clk48>;
};
irdaclk: irdaclk@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <37>;
clocks = <&clk48>;
};
sspiclk: sspiclk@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <38>;
clocks = <&clk48>;
};
uart0clk: uart0clk@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <39>;
clocks = <&clk48>;
};
sdiclk: sdiclk@48M {
/* Also called MCCLK in some documents */
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <40>;
clocks = <&clk48>;
};
i2c0clk: i2c0clk@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <41>;
clocks = <&clk48>;
};
i2c1clk: i2c1clk@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <42>;
clocks = <&clk48>;
};
uart1clk: uart1clk@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <43>;
clocks = <&clk48>;
};
mspclk0: mspclk0@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <44>;
clocks = <&clk48>;
};
usbclk: usbclk@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <45>;
clocks = <&clk48>; /* 48 MHz not ULPI */
};
difclk: difclk@72M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <46>;
clocks = <&clk72>;
};
ipi2cclk: ipi2cclk@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <47>;
clocks = <&clk48>; /* Guess */
};
ipbmcclk: ipbmcclk@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <48>;
clocks = <&clk48>; /* Guess */
};
hsiclkrx: hsiclkrx@216M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <49>;
clocks = <&clk216>;
};
hsiclktx: hsiclktx@108M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <50>;
clocks = <&clk108>;
};
uart2clk: uart2clk@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <51>;
clocks = <&clk48>;
};
mspclk1: mspclk1@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <52>;
clocks = <&clk48>;
};
mspclk2: mspclk2@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <53>;
clocks = <&clk48>;
};
owmclk: owmclk@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <54>;
clocks = <&clk48>; /* Guess */
};
skeclk: skeclk@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <56>;
clocks = <&clk48>; /* Guess */
};
x3dclk: x3dclk@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <58>;
clocks = <&clk48>; /* Guess */
};
pclkmsp3: pclkmsp3@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <59>;
clocks = <&pclk>;
};
mspclk3: mspclk3@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <60>;
clocks = <&clk48>;
};
mshcclk: mshcclk@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <61>;
clocks = <&clk48>; /* Guess */
};
usbmclk: usbmclk@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <62>;
/* Stated as "48 MHz not ULPI clock" */
clocks = <&clk48>;
};
rngcclk: rngcclk@48M {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <63>;
clocks = <&clk48>; /* Guess */
};
};
/* A NAND flash of 128 MiB */
fsmc: flash@40000000 {
compatible = "stericsson,fsmc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x10100000 0x1000>, /* FSMC Register*/
<0x40000000 0x2000>, /* NAND Base DATA */
<0x41000000 0x2000>, /* NAND Base ADDR */
<0x40800000 0x2000>; /* NAND Base CMD */
reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
clocks = <&hclksmc>;
status = "okay";
timings = /bits/ 8 <0 0 0 0x10 0x0a 0>;
partition@0 {
label = "X-Loader(NAND)";
reg = <0x0 0x40000>;
};
partition@40000 {
label = "MemInit(NAND)";
reg = <0x40000 0x40000>;
};
partition@80000 {
label = "BootLoader(NAND)";
reg = <0x80000 0x200000>;
};
partition@280000 {
label = "Kernel zImage(NAND)";
reg = <0x280000 0x300000>;
};
partition@580000 {
label = "Root Filesystem(NAND)";
reg = <0x580000 0x1600000>;
};
partition@1b80000 {
label = "User Filesystem(NAND)";
reg = <0x1b80000 0x6480000>;
};
};
external-bus@34000000 {
compatible = "simple-bus";
reg = <0x34000000 0x1000000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x34000000 0x1000000>;
ethernet@300 {
compatible = "smsc,lan91c111";
reg = <0x300 0x0fd00>;
};
};
/* I2C0 connected to the STw4811 power management chip */
i2c0 {
compatible = "st,nomadik-i2c", "arm,primecell";
reg = <0x101f8000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <20>;
clock-frequency = <100000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&i2c0clk>, <&pclki2c0>;
clock-names = "mclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
stw4811@2d {
compatible = "st,stw4811";
reg = <0x2d>;
vmmc_regulator: vmmc {
compatible = "st,stw481x-vmmc";
regulator-name = "VMMC";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
};
};
/* I2C1 connected to various sensors */
i2c1 {
compatible = "st,nomadik-i2c", "arm,primecell";
reg = <0x101f7000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <21>;
clock-frequency = <100000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&i2c1clk>, <&pclki2c1>;
clock-names = "mclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
camera@2d {
compatible = "st,camera";
reg = <0x10>;
};
stw5095@1a {
compatible = "st,stw5095";
reg = <0x1a>;
};
lis3lv02dl@1d {
compatible = "st,lis3lv02dl";
reg = <0x1d>;
};
};
/* I2C2 connected to the USB portions of the STw4811 only */
i2c2 {
compatible = "i2c-gpio";
gpios = <&gpio2 10 0>, /* sda */
<&gpio2 9 0>; /* scl */
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_default_mode>;
stw4811@2d {
compatible = "st,stw4811-usb";
reg = <0x2d>;
};
};
amba {
compatible = "arm,amba-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
vica: intc@10140000 {
compatible = "arm,versatile-vic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x10140000 0x20>;
};
vicb: intc@10140020 {
compatible = "arm,versatile-vic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x10140020 0x20>;
};
uart0: uart@101fd000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x101fd000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <12>;
clocks = <&uart0clk>, <&pclkuart0>;
clock-names = "uartclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart0_default_mux>;
};
uart1: uart@101fb000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x101fb000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <17>;
clocks = <&uart1clk>, <&pclkuart1>;
clock-names = "uartclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart1_default_mux>;
};
uart2: uart@101f2000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x101f2000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <28>;
clocks = <&uart2clk>, <&pclkuart2>;
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
rng: rng@101b0000 {
compatible = "arm,primecell";
reg = <0x101b0000 0x1000>;
clocks = <&rngcclk>, <&hclkrng>;
clock-names = "rng", "apb_pclk";
};
rtc: rtc@101e8000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0x101e8000 0x1000>;
clocks = <&pclk>;
clock-names = "apb_pclk";
interrupt-parent = <&vica>;
interrupts = <10>;
};
mmcsd: sdi@101f6000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x101f6000 0x1000>;
clocks = <&sdiclk>, <&pclksdi>;
clock-names = "mclk", "apb_pclk";
interrupt-parent = <&vica>;
interrupts = <22>;
max-frequency = <48000000>;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
vmmc-supply = <&vmmc_regulator>;
};
};
};
Reference in New Issue View Git Blame Copy Permalink