AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-13 15:46:43 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
500abb6ccb
linux_dsm_epyc7002/arch/arm/boot/dts
History
Arnaud Ebalard 500abb6ccb ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC 
The bootloader on the Netgear ReadyNAS RN2120 uses Hardware BCH
ECC (strength = 4), while the pxa3xx NAND driver by default uses
Hamming ECC (strength = 1).

This patch changes the ECC mode on these machines to match that
of the bootloader and of the stock firmware. That way, it is
now possible to update the kernel from userland (e.g. using
standard tools from mtd-utils package); u-boot will happily
load and boot it.

The issue was initially reported and fixed by Ben Pedell for
RN102. The RN2120 shares the same Hynix H27U1G8F2BTR NAND
flash and setup. This patch is based on Ben's fix for RN102.

Fixes: ad51eddd95 ("ARM: mvebu: Enable NAND controller in ReadyNAS 2120 .dts file")
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Link: https://lkml.kernel.org/r/61f6a1b7ad0adc57a0e201b9680bc2e5f214a317.1410035142.git.arno@natisbad.org
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-09-09 15:50:53 +00:00
..
include
aks-cdu.dts ARM: at91/dt: aks-cdu: define slow crytal frequency 2014-07-09 19:05:16 +02:00
am33xx-clocks.dtsi ARM: dts: am33xx-clock: Fix ehrpwm tbclk data 2014-05-23 11:50:36 +03:00
am33xx.dtsi ARM: dts: AM33xx: Add mailbox node 2014-07-15 05:08:56 -07:00
am35xx-clocks.dtsi ARM: dts: omap3 clock data 2014-01-17 12:36:41 -08:00
am43x-epos-evm.dts Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2014-08-08 17:39:48 -07:00
am43xx-clocks.dtsi Merge branch 'for-v3.16/clk-dt' of https://github.com/t-kristo/linux-pm into omap-for-v3.16/dt-v2 2014-05-28 10:14:48 -07:00
am335x-base0033.dts ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support 2013-11-26 15:03:38 -08:00
am335x-bone-common.dtsi ARM: dts: AM33XX: fix ethernet and mdio default state 2014-05-14 14:45:15 -07:00
am335x-bone.dts ARM: dts: AM33XX: Add AES data and documentation 2013-10-11 21:06:40 +02:00
am335x-boneblack.dts ARM: dts: am335x-boneblack: remove use of ti,vcc-aux-disable-is-sleep 2014-05-05 17:37:13 -07:00
am335x-evm.dts ARM: dts: am335x-evm: Enable the McASP FIFO for audio 2014-07-07 04:57:17 -07:00
am335x-evmsk.dts arm: Xilinx Zynq dt patches for v3.17 2014-07-19 12:16:34 -07:00
am335x-igep0033.dtsi ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA. 2014-07-07 05:01:18 -07:00
am335x-nano.dts ARM: dts: AM33XX: fix ethernet and mdio default state 2014-05-14 14:45:15 -07:00
am335x-pepper.dts ARM: dts: Add devicetree for Gumstix Pepper board 2014-07-09 04:34:19 -07:00
am437x-gp-evm.dts Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2014-08-08 17:39:48 -07:00
am437x-sk-evm.dts ARM: dts: add support for AM437x StarterKit 2014-07-01 05:47:35 -07:00
am3517_mt_ventoux.dts ARM: dts: AM3XXX: Use #include for all device trees 2013-06-18 18:53:41 -05:00
am3517-craneboard.dts ARM: dts: Add basic devices for AM3517-craneboard 2014-03-02 18:34:14 +01:00
am3517-evm.dts ARM: dts: Add basic devices on am3517-evm 2013-12-08 14:15:46 -08:00
am3517.dtsi ARM: dts: AM3517: Disable absent IPs inherited from OMAP3 2014-04-25 09:55:00 -07:00
am4372.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
animeo_ip.dts ARM: at91/dt: animeo_ip: define crystals frequencies 2014-07-09 19:05:18 +02:00
armada-38x.dtsi mvebu DT changes for v3.17 (round 2) 2014-07-20 12:23:56 -07:00
armada-370-db.dts ARM: SoC devicetree updates for 3.16 2014-06-02 16:34:00 -07:00
armada-370-mirabox.dts ARM: mvebu: remove clock-frequency of serial port Device Tree nodes 2014-04-26 00:34:44 +00:00
armada-370-netgear-rn102.dts ARM: mvebu: remove clock-frequency of serial port Device Tree nodes 2014-04-26 00:34:44 +00:00
armada-370-netgear-rn104.dts ARM: mvebu: Netgear RN104: Use Hardware BCH ECC 2014-09-09 15:49:13 +00:00
armada-370-rd.dts ARM: mvebu: remove clock-frequency of serial port Device Tree nodes 2014-04-26 00:34:44 +00:00
armada-370-xp.dtsi mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
armada-370.dtsi ARM: mvebu: switch to the new PMSU binding in Armada 370/XP Device Tree 2014-04-24 05:28:41 +00:00
armada-375-db.dts mvebu DT changes for v3.17 (round 2) 2014-07-20 12:23:56 -07:00
armada-375.dtsi ARM: mvebu: Add missing MDIO clock in Armada 375 2014-07-23 12:04:40 +00:00
armada-380.dtsi ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard 2014-06-24 11:33:24 +00:00
armada-385-db.dts mvebu fixes for v3.16 2014-06-25 20:26:30 +02:00
armada-385-rd.dts ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard 2014-06-24 11:33:24 +00:00
armada-385.dtsi ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard 2014-06-24 11:33:24 +00:00
armada-xp-axpwifiap.dts ARM: mvebu: remove clock-frequency of serial port Device Tree nodes 2014-04-26 00:34:44 +00:00
armada-xp-db.dts ARM: SoC devicetree updates for 3.16 2014-06-02 16:34:00 -07:00
armada-xp-gp.dts ARM: SoC devicetree updates for 3.16 2014-06-02 16:34:00 -07:00
armada-xp-lenovo-ix4-300d.dts ARM: mvebu: Add dts definition for Lenovo Iomega ix4-300d NAS 2014-07-28 13:59:41 +00:00
armada-xp-matrix.dts Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2014-06-12 14:27:40 -07:00
armada-xp-mv78230.dtsi ARM: mvebu: update Armada XP DT for dynamic frequency scaling 2014-07-16 12:54:13 +00:00
armada-xp-mv78260.dtsi ARM: mvebu: update Armada XP DT for dynamic frequency scaling 2014-07-16 12:54:13 +00:00
armada-xp-mv78460.dtsi ARM: mvebu: update Armada XP DT for dynamic frequency scaling 2014-07-16 12:54:13 +00:00
armada-xp-netgear-rn2120.dts ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC 2014-09-09 15:50:53 +00:00
armada-xp-openblocks-ax3-4.dts ARM: mvebu: DT: fix OpenBlocks AX3-4 RAM size 2014-06-17 17:09:37 +02:00
armada-xp.dtsi ARM: mvebu: update Armada XP DT for dynamic frequency scaling 2014-07-16 12:54:13 +00:00
armv7-m.dtsi ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs 2013-12-16 17:51:34 +01:00
at91-ariag25.dts ARM: at91/dt: ariag25: define crystals frequencies 2014-07-09 19:05:10 +02:00
at91-cosino_mega2560.dts ARM: at91/dt: at91-cosino_mega2560 remove useless tsadcc node 2014-05-07 18:28:41 +02:00
at91-cosino.dtsi ARM: at91/dt: cosino define crystals frequencies 2014-07-09 19:05:20 +02:00
at91-foxg20.dts ARM: at91/dt: foxg20: define crystals frequencies 2014-07-09 19:05:14 +02:00
at91-qil_a9260.dts ARM: at91/dt: qil_a9260: define crystals frequencies 2014-07-09 19:05:15 +02:00
at91-sama5d3_xplained.dts ARM: at91/dt: sama5d3 crystals under the clocks node 2014-07-09 18:02:45 +02:00
at91rm9200_pqfp.dtsi ARM: at91/dt: add at91rm9200 PQFP package version 2013-08-21 12:18:52 +02:00
at91rm9200.dtsi ARM: at91/dt: rm9200: define clocks 2014-07-09 19:05:11 +02:00
at91rm9200ek.dts ARM: at91/dt: at91rm9200ek: define crystals frequencies 2014-07-09 19:05:12 +02:00
at91sam9g15.dtsi
at91sam9g15ek.dts
at91sam9g20.dtsi ARM: at91/dt: sam9g20: define clocks 2014-07-09 19:05:13 +02:00
at91sam9g20ek_2mmc.dts
at91sam9g20ek_common.dtsi ARM: at91/dt: at91sam9g20ek: define crystals frequencies 2014-07-09 19:05:14 +02:00
at91sam9g20ek.dts
at91sam9g25.dtsi ARM: at91/dt: split sam9x5 peripheral definitions 2013-10-16 15:47:07 +02:00
at91sam9g25ek.dts
at91sam9g35.dtsi ARM: at91/dt: split sam9x5 peripheral definitions 2013-10-16 15:47:07 +02:00
at91sam9g35ek.dts
at91sam9g45.dtsi ARM: at91/dt: sam9g45: define clocks 2014-07-09 19:05:19 +02:00
at91sam9m10g45ek.dts ARM: at91/dt: sam9m10g45ek: define crystals frequencies 2014-07-09 19:05:19 +02:00
at91sam9n12.dtsi Linux 3.16-rc6 2014-07-28 17:04:15 +02:00
at91sam9n12ek.dts ARM: at91: at91sam9n12ek: switch sound to CCF 2014-07-09 18:02:46 +02:00
at91sam9rl.dtsi ARM: at91/dt: add NAND + DMA property for at91sam9rl 2014-07-09 18:02:47 +02:00
at91sam9rlek.dts ARM: at91/dt: sam9rl crystals under the clocks node 2014-07-09 18:02:44 +02:00
at91sam9x5_can.dtsi ARM: at91/dt: define sam9x5 clocks 2014-05-22 18:03:13 +02:00
at91sam9x5_isi.dtsi ARM: at91/dt: define sam9x5 clocks 2014-05-22 18:03:13 +02:00
at91sam9x5_lcd.dtsi ARM: at91/dt: define sam9x5 clocks 2014-05-22 18:03:13 +02:00
at91sam9x5_macb0.dtsi ARM: at91/dt: define sam9x5 clocks 2014-05-22 18:03:13 +02:00
at91sam9x5_macb1.dtsi ARM: at91/dt: define sam9x5 clocks 2014-05-22 18:03:13 +02:00
at91sam9x5_usart3.dtsi ARM: at91/dt: define sam9x5 clocks 2014-05-22 18:03:13 +02:00
at91sam9x5.dtsi Linux 3.16-rc6 2014-07-28 17:04:15 +02:00
at91sam9x5cm.dtsi ARM: at91/dt: sam9x5 crystals under the clocks node 2014-07-09 18:02:44 +02:00
at91sam9x5ek.dtsi ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
at91sam9x25.dtsi ARM: at91/dt: split sam9x5 peripheral definitions 2013-10-16 15:47:07 +02:00
at91sam9x25ek.dts
at91sam9x35.dtsi ARM: at91/dt: split sam9x5 peripheral definitions 2013-10-16 15:47:07 +02:00
at91sam9x35ek.dts
at91sam9260.dtsi ARM: at91/dt: sam9260: define clocks 2014-07-09 19:05:13 +02:00
at91sam9261.dtsi ARM: at91/dt: sam9261 crystals under the clocks node 2014-07-09 18:02:43 +02:00
at91sam9261ek.dts ARM: at91/dt: sam9261 crystals under the clocks node 2014-07-09 18:02:43 +02:00
at91sam9263.dtsi ARM: at91/dt: sam9263: define clocks 2014-07-09 19:05:21 +02:00
at91sam9263ek.dts ARM: at91/dt: sam9263ek: define crystals frequencies 2014-07-09 19:05:22 +02:00
atlas6-evb.dts
atlas6.dtsi ARM: SoC devicetree updates for 3.16 2014-06-02 16:34:00 -07:00
axm55xx.dtsi ARM: dts: axxia: Add reset controller 2014-05-23 18:18:46 +02:00
axm5516-amarillo.dts ARM: dts: Device tree for AXM55xx. 2014-05-23 18:18:45 +02:00
axm5516-cpus.dtsi ARM: dts: Device tree for AXM55xx. 2014-05-23 18:18:45 +02:00
bcm2835-rpi-b.dts ARM: bcm2835: add USB controller to device tree 2014-01-02 12:08:03 -08:00
bcm2835.dtsi ARM: bcm2835: fix clock DT node names 2014-02-24 19:40:27 -07:00
bcm4708-netgear-r6250.dts ARM: BCM5301X: add dts files for BCM4708 SoC 2014-02-19 09:15:59 -05:00
bcm4708.dtsi ARM: BCM5301X: add dts files for BCM4708 SoC 2014-02-19 09:15:59 -05:00
bcm5301x.dtsi ARM: BCM5301X: add dts files for BCM4708 SoC 2014-02-19 09:15:59 -05:00
bcm7445-bcm97445svmb.dts ARM: brcmstb: dts: add a reference DTS for Broadcom 7445 2014-07-28 10:01:46 -04:00
bcm7445.dtsi ARM: brcmstb: dts: add a reference DTS for Broadcom 7445 2014-07-28 10:01:46 -04:00
bcm11351.dtsi ARM: dts: enable SMP support for bcm28155 2014-07-28 09:41:44 -04:00
bcm21664-garnet.dts ARM: dts: bcm21664: Add device tree files. 2014-03-14 12:22:37 -04:00
bcm21664.dtsi ARM: dts: enable SMP support for bcm21664 2014-07-28 09:41:54 -04:00
bcm28155-ap.dts ARM: dts: Enable the PWM for bcm28155 AP board 2014-04-28 11:14:47 -04:00
bcm59056.dtsi ARM: dts: bcm590xx: add support for GPLDO and VBUS regulators 2014-05-23 08:07:01 -04:00
berlin2-sony-nsz-gs7.dts ARM: add Armada 1500 and Sony NSZ-GS7 device tree files 2013-12-13 16:31:05 +01:00
berlin2.dtsi ARM: dts: berlin: add SMP related nodes and properties for BG2 2014-06-16 13:17:53 +02:00
berlin2cd-google-chromecast.dts ARM: add Armada 1500-mini and Chromecast device tree files 2013-12-13 16:31:06 +01:00
berlin2cd.dtsi ARM: dts: berlin: add the pinctrl node and muxing setup for uarts 2014-05-19 23:02:31 +02:00
berlin2q-marvell-dmp.dts ARM: dts: berlin: enable i2c0 and i2c2 2014-06-16 13:17:36 +02:00
berlin2q.dtsi ARM: dts: berlin: add SMP related nodes and properties for BG2Q 2014-06-16 13:17:53 +02:00
cros-ec-keyboard.dtsi ARM: dts: Create a cros-ec-keyboard fragment 2014-06-16 12:11:31 -06:00
da850-enbw-cmc.dts ARM: davinci: da850: Use #include for all device trees 2013-06-20 15:04:30 +05:30
da850-evm.dts ARM: davinci: da850 evm: add GPIO pinumux entries DT node 2013-12-15 18:40:49 +05:30
da850.dtsi ARM: davinci: da850: add GPIO DT node 2013-12-15 18:35:37 +05:30
dove-cm-a510.dts ARM: dove: use preprocessor on device tree files 2013-09-30 15:00:35 +00:00
dove-cubox-es.dts ARM: dts: mvebu: split SolidRun CuBox into variants 2014-06-20 23:46:25 +00:00
dove-cubox.dts ARM: dts: mvebu: split SolidRun CuBox into variants 2014-06-20 23:46:25 +00:00
dove-d2plug.dts ARM: dove: use preprocessor on device tree files 2013-09-30 15:00:35 +00:00
dove-d3plug.dts ARM: dove: add initial DT file for Globalscale D3Plug 2013-09-30 15:00:54 +00:00
dove-dove-db.dts ARM: dove: use preprocessor on device tree files 2013-09-30 15:00:35 +00:00
dove.dtsi ARM: dts: dove: add DT LCD controllers 2014-07-25 00:07:22 +00:00
dra7-evm.dts arm: Xilinx Zynq dt patches for v3.17 2014-07-19 12:16:34 -07:00
dra7.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
dra7xx-clocks.dtsi arm: Xilinx Zynq dt patches for v3.17 2014-07-19 12:16:34 -07:00
dra72-evm.dts ARM: dts: Add support for DRA72x family of devices 2014-05-06 10:20:14 -07:00
dra72x.dtsi ARM: dts: Add support for DRA72x family of devices 2014-05-06 10:20:14 -07:00
dra74x.dtsi ARM: dts: Add support for DRA72x family of devices 2014-05-06 10:20:14 -07:00
ea3250.dts
ecx-2000.dts ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi 2013-11-04 17:01:05 -06:00
ecx-common.dtsi EDAC updates for 3.13 2013-11-18 14:50:17 -08:00
efm32gg-dk3750.dts ARM: efm32: properly namespace i2c location property 2014-03-14 16:04:30 +01:00
efm32gg.dtsi ARM: efm32: fix unit address part in USART2 device nodes' names 2014-03-14 16:04:15 +01:00
elpida_ecb240abacn.dtsi
emev2-kzm9d.dts ARM: shmobile: emev2: Use interrupt macros in DT files 2013-12-10 17:27:20 +09:00
emev2.dtsi ARM: shmobile: Update EMEV2 DTS to include CPU frequency 2014-06-17 17:27:54 +09:00
ethernut5.dts ARM: at91/dt: ethernut5: define crystals frequencies 2014-07-09 19:05:17 +02:00
evk-pro3.dts ARM: at91/dt: evk-pro3: define slow crytal frequency 2014-07-09 19:05:17 +02:00
exynos4.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
exynos4x12-pinctrl.dtsi ARM: dts: Add pinctrl entries for Exynos4x12 FIMC-IS peripherals 2013-08-06 02:49:43 +09:00
exynos4x12.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
exynos5.dtsi Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux 2014-08-07 17:36:12 -07:00
exynos3250-pinctrl.dtsi ARM: dts: add dts files for exynos3250 SoC 2014-05-31 02:09:17 +09:00
exynos3250.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
exynos4210-origen.dts ARM: dts: use key code macros on Origen and Arndale boards 2014-05-31 02:06:51 +09:00
exynos4210-pinctrl.dtsi ARM: dts: Add Exynos4210 SoC camera port pinctrl nodes 2013-08-07 01:08:24 +09:00
exynos4210-smdkv310.dts ARM: dts: fix the chip select gpios definition in the SPI nodes 2014-07-17 19:37:50 +01:00
exynos4210-trats.dts ARM: dts: Enable USB gadget functionality for exynos4210-trats 2014-05-23 02:34:11 +09:00
exynos4210-universal_c210.dts ARM: dts: add external sd card node for exynos4210-universal_c210 2014-05-23 02:34:14 +09:00
exynos4210.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
exynos4212.dtsi Exynos cleanup for v3.15 2014-03-29 02:03:39 +01:00
exynos4412-odroid-common.dtsi ARM: dts: Add sound nodes for Odroid-X2/U3 boards 2014-07-16 03:16:44 +09:00
exynos4412-odroidu3.dts ARM: dts: Add sound nodes for Odroid-X2/U3 boards 2014-07-16 03:16:44 +09:00
exynos4412-odroidx2.dts ARM: dts: Add sound nodes for Odroid-X2/U3 boards 2014-07-16 03:16:44 +09:00
exynos4412-odroidx.dts ARM: dts: add support for GPIO buttons for exynos4412-odroid 2014-07-16 02:54:07 +09:00
exynos4412-origen.dts ARM: dts: use key code macros on Origen and Arndale boards 2014-05-31 02:06:51 +09:00
exynos4412-smdk4412.dts ARM: dts: Update Exynos DT files with generic compatible strings 2014-03-21 02:17:22 +09:00
exynos4412-tiny4412.dts ARM: dts: Update Exynos DT files with generic compatible strings 2014-03-21 02:17:22 +09:00
exynos4412-trats2.dts ARM: dts: fix the chip select gpios definition in the SPI nodes 2014-07-17 19:37:50 +01:00
exynos4412.dtsi ARM: dts: clean up arm-pmu node for exynos4 2014-07-19 03:11:48 +09:00
exynos5250-arndale.dts ARM: SoC devicetree updates for 3.16 2014-06-02 16:34:00 -07:00
exynos5250-cros-common.dtsi ARM: dts: cypress,cyapa trackpad is exynos5250-Snow only 2014-07-30 07:53:07 +09:00
exynos5250-pinctrl.dtsi ARM: dts: Add pwmX_out pinctrl nodes to exynos5250 2014-05-19 23:14:02 +09:00
exynos5250-smdk5250.dts ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
exynos5250-snow.dts Samsung DT 2nd updates for v3.17 2014-07-31 20:17:53 -07:00
exynos5250.dtsi ARM: dts: exynos: Update PMU node with CLKOUT related data 2014-07-26 02:47:10 +02:00
exynos5260-pinctrl.dtsi ARM: dts: add dts files for exynos5260 SoC 2014-05-31 02:09:04 +09:00
exynos5260-xyref5260.dts ARM: dts: add dts file for exynos5260-xyref5260 board 2014-05-31 02:09:10 +09:00
exynos5260.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
exynos5410-smdk5410.dts ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410 2014-05-31 02:09:18 +09:00
exynos5410.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
exynos5420-arndale-octa.dts Samsung 3rd DT updates for v3.16 2014-05-30 21:21:10 -07:00
exynos5420-peach-pit.dts ARM: dts: Add cros_ec to exynos5420-peach-pit and exynos5800-peach-pi 2014-07-19 04:09:15 +09:00
exynos5420-pinctrl.dtsi ARM: dts: Add pwmX_out pinctrl nodes to exynos5420 2014-05-09 06:06:10 +09:00
exynos5420-smdk5420.dts ARM: dts: Add MFC memory banks to exynos5420 boards 2014-05-20 01:04:13 +09:00
exynos5420.dtsi ARM: dts: exynos5420: remove disp_pd 2014-08-09 08:25:50 -07:00
exynos5440-sd5v1.dts ARM: dts: Update Exynos DT files with generic compatible strings 2014-03-21 02:17:22 +09:00
exynos5440-ssdk5440.dts ARM: dts: Update Exynos DT files with generic compatible strings 2014-03-21 02:17:22 +09:00
exynos5440.dtsi ARM: dts: SAMSUNG: Add aliases of UART nodes 2014-07-09 17:22:55 -07:00
exynos5800-peach-pi.dts ARM: dts: Add cros_ec to exynos5420-peach-pit and exynos5800-peach-pi 2014-07-19 04:09:15 +09:00
exynos5800.dtsi ARM: dts: add mfc node for exynos5800 2014-05-31 02:09:17 +09:00
ge863-pro3.dtsi ARM: at91/dt: ge863-pro3: define main crystal frequency 2014-07-09 19:05:16 +02:00
hi3620-hi4511.dts ARM: dts: rename hi4511 dts file 2013-12-20 08:23:01 -08:00
hi3620.dtsi ARM: SoC platform changes for 3.17 2014-08-08 11:14:29 -07:00
highbank.dts ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi 2013-11-04 17:01:05 -06:00
hisi-x5hd2-dkb.dts ARM: hisi: remove smp from machine descriptor 2014-07-30 22:32:21 -07:00
hisi-x5hd2.dtsi ARM: dts: Add hix5hd2-dkb dts file. 2014-07-30 22:32:21 -07:00
imx6dl-aristainetos_4.dts ARM: dts: imx6: add aristainetos board support 2014-07-18 16:49:38 +08:00
imx6dl-aristainetos_7.dts ARM: dts: imx6: add aristainetos board support 2014-07-18 16:49:38 +08:00
imx6dl-cubox-i.dts ARM: imx: initial SolidRun Cubox-i support 2014-01-27 14:21:01 +00:00
imx6dl-dfi-fs700-m60.dts ARM: dts: imx6: Add DFI FS700-M60 board support 2014-02-10 16:27:40 +08:00
imx6dl-gw51xx.dts ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types 2014-07-18 16:49:32 +08:00
imx6dl-gw52xx.dts ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types 2014-07-18 16:49:32 +08:00
imx6dl-gw53xx.dts ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types 2014-07-18 16:49:32 +08:00
imx6dl-gw54xx.dts ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types 2014-07-18 16:49:32 +08:00
imx6dl-hummingboard.dts ARM: dts: hummingboard/cubox-i: move usb otg configuration to platform level 2014-06-17 22:00:07 +08:00
imx6dl-nitrogen6x.dts ARM: dts: imx: add nitrogen6x board 2014-02-09 21:29:32 +08:00
imx6dl-phytec-pbab01.dts ARM: dts: Add Phytec pbab01 with i.MX6 DualLite/Solo 2014-05-16 23:01:53 +08:00
imx6dl-phytec-pfla02.dtsi ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo 2014-05-16 23:01:52 +08:00
imx6dl-pinfunc.h ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ 2014-02-09 21:29:44 +08:00
imx6dl-rex-basic.dts ARM: dts: add initial Rex Basic board support 2014-07-18 16:49:47 +08:00
imx6dl-riotboard.dts ARM: dts: imx6: RIoTboard explicitly define pad settings 2014-07-18 16:49:46 +08:00
imx6dl-sabreauto.dts ARM: dts: imx: share pad macro names between imx6q and imx6dl 2013-08-22 23:29:11 +08:00
imx6dl-sabrelite.dts ARM: dts: imx: sabrelite: add Dual Lite/Solo support 2014-02-09 21:29:16 +08:00
imx6dl-sabresd.dts ARM: dts: imx: share pad macro names between imx6q and imx6dl 2013-08-22 23:29:11 +08:00
imx6dl-tx6dl-comtft.dts ARM: dts: imx6: add support for Ka-Ro TX6 modules 2014-07-18 16:49:35 +08:00
imx6dl-tx6u-801x.dts ARM: dts: imx6: add support for Ka-Ro TX6 modules 2014-07-18 16:49:35 +08:00
imx6dl-tx6u-811x.dts ARM: dts: imx6: add support for Ka-Ro TX6 modules 2014-07-18 16:49:35 +08:00
imx6dl-wandboard-revb1.dts ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. 2014-07-18 16:49:45 +08:00
imx6dl-wandboard.dts ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. 2014-07-18 16:49:45 +08:00
imx6dl.dtsi ARM: dts: imx6qdl: use DT macro for clock ID 2014-07-18 16:49:38 +08:00
imx6q-arm2.dts ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt. 2014-02-10 16:27:27 +08:00
imx6q-cm-fx6.dts ARM: dts: Add initial support for cm-fx6. 2014-02-09 21:28:55 +08:00
imx6q-cubox-i.dts ARM: dts: cubox-i: disable spread-spectrum for Cubox-i eSATA 2014-07-18 16:49:40 +08:00
imx6q-dfi-fs700-m60.dts ARM: dts: imx6: Add DFI FS700-M60 board support 2014-02-10 16:27:40 +08:00
imx6q-dmo-edmqmx6.dts ARM: dts: imx6: edmqmx6: Add can bus 2014-07-18 16:49:43 +08:00
imx6q-gk802.dts ARM: dts: Add stdout-path property to i.MX boards 2014-05-16 23:02:07 +08:00
imx6q-gw51xx.dts ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types 2014-07-18 16:49:32 +08:00
imx6q-gw52xx.dts ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types 2014-07-18 16:49:32 +08:00
imx6q-gw53xx.dts ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types 2014-07-18 16:49:32 +08:00
imx6q-gw54xx.dts ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU types 2014-07-18 16:49:32 +08:00
imx6q-gw5400-a.dts ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx6q-nitrogen6x.dts ARM: dts: imx: add nitrogen6x board 2014-02-09 21:29:32 +08:00
imx6q-phytec-pbab01.dts ARM: dts: Add stdout-path property to i.MX boards 2014-05-16 23:02:07 +08:00
imx6q-phytec-pfla02.dtsi ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo 2014-05-16 23:01:52 +08:00
imx6q-pinfunc.h ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ 2014-02-09 21:29:44 +08:00
imx6q-rex-pro.dts ARM: dts: add initial Rex Pro board support 2014-07-18 16:49:46 +08:00
imx6q-sabreauto.dts ARM: dtsi: enable ahci sata on imx6q platforms 2013-08-22 23:29:25 +08:00
imx6q-sabrelite.dts ARM: dts: imx: sabrelite: add Dual Lite/Solo support 2014-02-09 21:29:16 +08:00
imx6q-sabresd.dts ARM: dts: imx6qdl: Add IPU DI ports and endpoints, move imx-drm node to dtsi 2014-03-07 16:17:59 +00:00
imx6q-sbc6x.dts ARM: dts: imx6qdl: make pinctrl nodes board specific 2014-02-09 21:28:56 +08:00
imx6q-tx6q-1010-comtft.dts ARM: dts: imx6: add support for Ka-Ro TX6 modules 2014-07-18 16:49:35 +08:00
imx6q-tx6q-1010.dts ARM: dts: imx6: add support for Ka-Ro TX6 modules 2014-07-18 16:49:35 +08:00
imx6q-tx6q-1020-comtft.dts ARM: dts: imx6: add support for Ka-Ro TX6 modules 2014-07-18 16:49:35 +08:00
imx6q-tx6q-1020.dts ARM: dts: imx6: add support for Ka-Ro TX6 modules 2014-07-18 16:49:35 +08:00
imx6q-tx6q-1110.dts ARM: dts: imx6: add support for Ka-Ro TX6 modules 2014-07-18 16:49:35 +08:00
imx6q-udoo.dts ARM: dts: imx6q-udoo: Add USB Host support 2014-07-18 16:49:34 +08:00
imx6q-wandboard-revb1.dts ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. 2014-07-18 16:49:45 +08:00
imx6q-wandboard.dts ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. 2014-07-18 16:49:45 +08:00
imx6q.dtsi ARM: dts: imx6qdl: use DT macro for clock ID 2014-07-18 16:49:38 +08:00
imx6qdl-aristainetos.dtsi ARM: dts: imx6: add aristainetos board support 2014-07-18 16:49:38 +08:00
imx6qdl-cubox-i.dtsi ARM: dts: hummingboard/cubox-i: move usb otg configuration to platform level 2014-06-17 22:00:07 +08:00
imx6qdl-dfi-fs700-m60.dtsi ARM: dts: Add stdout-path property to i.MX boards 2014-05-16 23:02:07 +08:00
imx6qdl-gw51xx.dtsi ARM: dts: imx6qdl-gw5xxx: Fix Linear Technology vendor prefix 2014-06-17 21:11:19 +08:00
imx6qdl-gw52xx.dtsi ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx6qdl-gw53xx.dtsi ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx6qdl-gw54xx.dtsi ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx6qdl-microsom-ar8035.dtsi ARM: dt: microsom: don't set bit 7 for ethernet mux settings 2014-04-14 10:22:37 +08:00
imx6qdl-microsom.dtsi ARM: dts: hummingboard/cubox-i: move usb otg configuration to platform level 2014-06-17 22:00:07 +08:00
imx6qdl-nitrogen6x.dtsi ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx6qdl-phytec-pbab01.dtsi ARM: dts: pbab01: Enable DVI 2014-05-16 23:01:56 +08:00
imx6qdl-phytec-pfla02.dtsi ARM: dts: pfla02: Add ethernet phy supply regulator 2014-07-18 16:49:33 +08:00
imx6qdl-rex.dtsi ARM: dts: add initial Rex Pro board support 2014-07-18 16:49:46 +08:00
imx6qdl-sabreauto.dtsi ARM: dts: imx6qdl-sabreauto: Support debug LED 2014-02-20 09:38:07 +08:00
imx6qdl-sabrelite.dtsi ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx6qdl-sabresd.dtsi ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx6qdl-tx6.dtsi ARM: dts: mx6: Disable the keypad in the dtsi files 2014-07-18 16:49:40 +08:00
imx6qdl-wandboard-revb1.dtsi ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. 2014-07-18 16:49:45 +08:00
imx6qdl-wandboard-revc1.dtsi ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. 2014-07-18 16:49:45 +08:00
imx6qdl-wandboard.dtsi ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. 2014-07-18 16:49:45 +08:00
imx6qdl.dtsi ARM: imx6: Align ssi nodes between mx6 variants 2014-07-18 16:49:44 +08:00
imx6sl-evk.dts ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx6sl-pinfunc.h
imx6sl.dtsi ARM: imx6: Align ssi nodes between mx6 variants 2014-07-18 16:49:44 +08:00
imx6sx-pinfunc.h ARM: dts: imx: add pin function header for imx6sx 2014-07-18 16:49:30 +08:00
imx6sx-sdb.dts ARM: dts: imx6sx-sdb: Add audio support 2014-07-18 16:49:44 +08:00
imx6sx.dtsi ARM: imx6: Align ssi nodes between mx6 variants 2014-07-18 16:49:44 +08:00
imx23-evk.dts ARM: dts: imx: use generic node name for fixed regulator 2014-02-09 21:32:30 +08:00
imx23-olinuxino.dts ARM: dts: imx: use generic node name for fixed regulator 2014-02-09 21:32:30 +08:00
imx23-pinfunc.h ARM: dts: mxs: add pinctrl header files 2013-09-26 13:01:36 +08:00
imx23-stmp378x_devb.dts ARM: dts: imx: use generic node name for fixed regulator 2014-02-09 21:32:30 +08:00
imx23.dtsi ARM: dts: mxs: add mxs phy controller id 2014-02-09 21:33:36 +08:00
imx25-eukrea-cpuimx25.dtsi ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard. 2014-02-09 21:33:21 +08:00
imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts ARM: dts: mbimxsd25: cmo-qvga: Fix lcd regulator 2014-07-18 16:49:37 +08:00
imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts ARM: dts: imx25: mbimxsd25: Add displays support. 2014-07-18 16:49:34 +08:00
imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts ARM: dts: imx25: mbimxsd25: Add displays support. 2014-07-18 16:49:34 +08:00
imx25-eukrea-mbimxsd25-baseboard.dts ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx25-karo-tx25.dts ARM: dts: Karo TX25: use hardware ecc 2014-05-16 23:02:11 +08:00
imx25-pdk.dts ARM: dts: imx25-pdk: Add USB OTG support 2014-07-18 16:49:42 +08:00
imx25-pinfunc.h ARM: dts: imx25: Add pinctrl functions. 2014-02-09 21:32:31 +08:00
imx25.dtsi ARM: dts: i.MX25: Fix gpt timers clocks. 2014-07-18 16:49:41 +08:00
imx27-apf27.dts ARM: dts: imx: add required #clock-cells for fixed-clock 2014-04-14 10:22:39 +08:00
imx27-apf27dev.dts ARM: dts: imx27-apf27dev: Add pinctrl for cspi, sdhci, leds and keys 2014-02-09 21:33:14 +08:00
imx27-eukrea-cpuimx27.dtsi ARM: dts: Add support for the cpuimx27 board from Eukrea and its baseboard 2014-07-18 16:49:31 +08:00
imx27-eukrea-mbimxsd27-baseboard.dts ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx27-pdk.dts ARM: i.MX27 clk: dts: Use clock defines in DTS files 2014-07-18 16:49:44 +08:00
imx27-phytec-phycard-s-rdk.dts ARM: dts: Add stdout-path property to i.MX boards 2014-05-16 23:02:07 +08:00
imx27-phytec-phycard-s-som.dtsi ARM: dts: imx27-phytec-phycard-s-som: Rename file to .dtsi 2014-02-13 09:57:32 +08:00
imx27-phytec-phycore-rdk.dts ARM: i.MX27 clk: dts: Use clock defines in DTS files 2014-07-18 16:49:44 +08:00
imx27-phytec-phycore-som.dtsi ARM: i.MX27 clk: dts: Use clock defines in DTS files 2014-07-18 16:49:44 +08:00
imx27-pinfunc.h pinctrl: i.MX27: Remove nonexistent pad definitions 2014-07-11 14:08:26 +02:00
imx27.dtsi ARM: i.MX27 clk: dts: Use clock defines in DTS files 2014-07-18 16:49:44 +08:00
imx28-apf28.dts ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers 2013-09-26 13:01:36 +08:00
imx28-apf28dev.dts ARM: dts: imx28-apf28dev: add user button 2014-02-09 21:33:45 +08:00
imx28-apx4devkit.dts ARM: dts: imx: use generic node name for fixed regulator 2014-02-09 21:32:30 +08:00
imx28-cfa10036.dts ARM: dt: imx28-cfa10036: introduce a regulator for mmc0 2014-07-18 16:49:32 +08:00
imx28-cfa10037.dts ARM: i.MX28: dts: rename usbphy pin names 2014-02-09 21:33:22 +08:00
imx28-cfa10049.dts ARM: i.MX28: dts: rename usbphy pin names 2014-02-09 21:33:22 +08:00
imx28-cfa10055.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx28-cfa10056.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx28-cfa10057.dts ARM: i.MX28: dts: rename usbphy pin names 2014-02-09 21:33:22 +08:00
imx28-cfa10058.dts ARM: i.MX28: dts: rename usbphy pin names 2014-02-09 21:33:22 +08:00
imx28-duckbill.dts ARM: dts: imx28-duckbill: use symbolic names from gpio.h 2014-05-16 23:01:48 +08:00
imx28-eukrea-mbmx28lc.dtsi ARM: mxs: Add support for the eukrea-cpuimx28. 2014-02-09 21:33:20 +08:00
imx28-eukrea-mbmx283lc.dts ARM: mxs: Add support for the eukrea-cpuimx28. 2014-02-09 21:33:20 +08:00
imx28-eukrea-mbmx287lc.dts ARM: mxs: Add support for the eukrea-cpuimx28. 2014-02-09 21:33:20 +08:00
imx28-evk.dts ARM: dts: imx28-evk: Run I2C0 at 400kHz 2014-02-09 21:33:00 +08:00
imx28-m28.dtsi ARM: dts: mxs: Split M28EVK into SoM and EVK parts 2014-07-18 16:49:41 +08:00
imx28-m28cu3.dts ARM: dts: imx28-m28cu3: Remove 'reset-active-high' 2014-02-09 21:33:52 +08:00
imx28-m28evk.dts ARM: dts: mxs: Split M28EVK into SoM and EVK parts 2014-07-18 16:49:41 +08:00
imx28-pinfunc.h ARM: dts: mxs: add pinctrl header files 2013-09-26 13:01:36 +08:00
imx28-sps1.dts ARM: i.MX28: dts: rename usbphy pin names 2014-02-09 21:33:22 +08:00
imx28-tx28.dts ARM: dts: imx28-tx28: Remove 'enable-active-low' property 2014-02-10 11:19:43 +08:00
imx28.dtsi ARM: dts: imx28: include gpio.h to allow use of symbolic names 2014-05-16 23:01:47 +08:00
imx31-bug.dts
imx31.dtsi ARM: dts: imx: Add the missing cpus node 2013-08-22 23:29:01 +08:00
imx35-eukrea-cpuimx35.dtsi ARM: dts: cpuimx35 Add touchscreen support. 2014-05-16 23:01:50 +08:00
imx35-eukrea-mbimxsd35-baseboard.dts ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx35-pdk.dts ARM: dts: imx35-pdk: Fix memory region description 2014-05-16 23:02:13 +08:00
imx35-pinfunc.h
imx35.dtsi ARM: dts: i.MX35: Add GPT node 2014-07-18 16:49:35 +08:00
imx50-evk.dts ARM: dts: imx: add device tree support for Freescale imx50evk board 2014-02-09 21:32:21 +08:00
imx50-pinfunc.h ARM: dts: imx: add device tree pin definitions for the IMX50 2014-02-09 21:32:18 +08:00
imx50.dtsi ARM: dts: imx50: add ssi dma properties 2014-07-18 16:49:36 +08:00
imx51-apf51.dts ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitions 2014-02-09 21:32:51 +08:00
imx51-apf51dev.dts ARM: SoC: device tree changes 2014-04-05 15:29:04 -07:00
imx51-babbage.dts ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx51-digi-connectcore-jsk.dts ARM i.MX51: Add Digi ConnectCore devicetree 2014-05-16 23:01:51 +08:00
imx51-digi-connectcore-som.dtsi ARM: dts: i.MX51: Allow to define partitions onto NFC 2014-05-16 23:01:56 +08:00
imx51-eukrea-cpuimx51.dtsi ARM: dts: cpuimx51 Add touchscreen support. 2014-05-16 23:01:50 +08:00
imx51-eukrea-mbimxsd51-baseboard.dts ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx51-pinfunc.h
imx51.dtsi ARM: dts: imx5: remove fsl,ssi-dma-events 2014-07-18 16:49:36 +08:00
imx53-ard.dts ARM: dts: imx: use generic node name for fixed regulator 2014-02-09 21:32:30 +08:00
imx53-m53.dtsi ARM: dts: mx5: Split M53EVK into SoM and EVK parts 2014-07-18 16:49:46 +08:00
imx53-m53evk.dts ARM: dts: mx5: Split M53EVK into SoM and EVK parts 2014-07-18 16:49:46 +08:00
imx53-mba53.dts ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx53-pinfunc.h
imx53-qsb-common.dtsi ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx53-qsb.dts ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi 2014-03-07 16:17:58 +00:00
imx53-qsrb.dts ARM: dts: i.MX53: add support for MCIMX53-START-R 2014-02-09 21:33:43 +08:00
imx53-smd.dts ARM: dts: imx53: make pinctrl nodes board specific 2014-02-09 21:32:25 +08:00
imx53-tqma53.dtsi ARM: dts: imx: use generic node name for fixed regulator 2014-02-09 21:32:30 +08:00
imx53-tx53-x03x.dts ARM: dts: imx53-tx53: add IPU DI ports and endpoints 2014-04-14 10:22:38 +08:00
imx53-tx53-x13x.dts ARM: dts: imx53: add support for Ka-Ro TX53 modules 2014-02-09 21:33:48 +08:00
imx53-tx53.dtsi ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx53-voipac-bsb.dts ARM: dts: imx: remove ssi fsl,mode for audio cards 2014-07-18 16:49:37 +08:00
imx53-voipac-dmm-668.dtsi ARM: dts: i.MX53: dts for Voipac x53-dmm-668 module 2014-02-09 21:32:23 +08:00
imx53.dtsi ARM: dts: imx53: correct clock-names of SATA node 2014-07-18 16:49:45 +08:00
integrator.dtsi ARM: integrator: move EBI to the device tree 2013-12-04 16:22:31 +01:00
integratorap.dts ARM: integrator: get rid of <mach/memory.h> 2014-06-27 10:15:22 +02:00
integratorcp.dts ARM: integrator: define clocks in the device trees 2014-02-13 11:20:31 +01:00
k2e-clocks.dtsi ARM: dts: keystone: fix netcp's clocks definitions 2014-07-08 12:23:42 -04:00
k2e-evm.dts ARM: dts: keystone-evm: add spi nor flash support 2014-05-12 11:43:59 -04:00
k2e.dtsi ARM: dts: keystone: add support for k2 Edison SoC and EVM 2014-02-26 10:06:56 -05:00
k2hk-clocks.dtsi ARM: dts: keystone: fix netcp's clocks definitions 2014-07-08 12:23:42 -04:00
k2hk-evm.dts ARM: dts: keystone-evm: add 1g ethernet phys nodes 2014-07-17 13:29:06 -04:00
k2hk.dtsi ARM: dts: keystone: preparatory patch to support K2L and K2E SOCs 2014-02-26 10:06:56 -05:00
k2l-clocks.dtsi ARM: dts: keystone: fix netcp's clocks definitions 2014-07-08 12:23:42 -04:00
k2l-evm.dts ARM: dts: keystone-evm: add spi nor flash support 2014-05-12 11:43:59 -04:00
k2l.dtsi ARM: dts: keystone: add support for K2 Lamarr SoC and EVM 2014-02-26 10:06:56 -05:00
keystone-clocks.dtsi ARM: dts: keystone: fix netcp's clocks definitions 2014-07-08 12:23:42 -04:00
keystone.dtsi ARM: dts: keystone: add mdio devices entries 2014-07-17 13:29:05 -04:00
kirkwood-98dx4122.dtsi ARM: dts: kirkwood: resynch 98dx4122 dtsi 2014-05-16 17:56:51 +00:00
kirkwood-6192.dtsi ARM: dts: kirkwood: consolidate common pinctrl settings 2014-05-05 00:52:28 +00:00
kirkwood-6281.dtsi ARM: dts: kirkwood: consolidate common pinctrl settings 2014-05-05 00:52:28 +00:00
kirkwood-6282.dtsi ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282 2014-05-05 00:53:24 +00:00
kirkwood-b3.dts mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
kirkwood-cloudbox.dts mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
kirkwood-d2net.dts ARM: Kirkwood: add DT support for d2 Network v2 2014-07-13 21:29:56 +00:00
kirkwood-db-88f6281.dts ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding 2013-10-01 16:28:03 +00:00
kirkwood-db-88f6282.dts ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding 2013-10-01 16:28:03 +00:00
kirkwood-db.dtsi ARM: dts: kirkwood: set default pinctrl for NAND 2014-05-05 00:53:06 +00:00
kirkwood-dns320.dts ARM: dts: kirkwood: set default pinctrl for UART0/1 2014-05-05 00:52:45 +00:00
kirkwood-dns325.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-dnskw.dtsi ARM: dts: kirkwood: set default pinctrl for NAND 2014-05-05 00:53:06 +00:00
kirkwood-dockstar.dts ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood-dreamplug.dts mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
kirkwood-ds109.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds110jv10.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds111.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds112.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds209.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds210.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds212.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds212j.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds409.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds409slim.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds411.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds411j.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-ds411slim.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-goflexnet.dts ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood-guruplug-server-plus.dts ARM: dts: kirkwood: fix phy-connection-type for Guruplug 2014-06-23 21:48:16 +00:00
kirkwood-ib62x0.dts ARM: dts: kirkwood: set default pinctrl for NAND 2014-05-05 00:53:06 +00:00
kirkwood-iconnect.dts ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood-iomega_ix2_200.dts ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood-is2.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-km_common.dtsi ARM: dts: kirkwood: add kirkwood-km_common DTSI files 2014-05-16 17:57:19 +00:00
kirkwood-km_fixedeth.dts ARM: dts: kirkwood: add kirkwood-km_fixedeth DTS file 2014-05-16 17:57:27 +00:00
kirkwood-km_kirkwood.dts ARM: dts: kirkwood: add kirkwood-km_common DTSI files 2014-05-16 17:57:19 +00:00
kirkwood-laplug.dts mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
kirkwood-lschlv2.dts ARM: kirkwood: Use the preprocessor on device tree files 2013-08-06 14:11:37 +00:00
kirkwood-lsxhl.dts ARM: kirkwood: Use the preprocessor on device tree files 2013-08-06 14:11:37 +00:00
kirkwood-lsxl.dtsi ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood-mplcec4.dts ARM: dts: kirkwood: set default pinctrl for NAND 2014-05-05 00:53:06 +00:00
kirkwood-mv88f6281gtw-ge.dts ARM: SoC devicetree updates for 3.16 2014-06-02 16:34:00 -07:00
kirkwood-net2big.dts ARM: Kirkwood: allow to use netxbig DTSI for d2net_v2 DTS 2014-07-13 21:22:49 +00:00
kirkwood-net5big.dts ARM: Kirkwood: allow to use netxbig DTSI for d2net_v2 DTS 2014-07-13 21:22:49 +00:00
kirkwood-netgear_readynas_duo_v2.dts ARM: dts: kirkwood: set default pinctrl for UART0/1 2014-05-05 00:52:45 +00:00
kirkwood-netgear_readynas_nv+_v2.dts ARM: dts: kirkwood: set default pinctrl for UART0/1 2014-05-05 00:52:45 +00:00
kirkwood-netxbig.dtsi ARM: Kirkwood: allow to use netxbig DTSI for d2net_v2 DTS 2014-07-13 21:22:49 +00:00
kirkwood-ns2-common.dtsi mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
kirkwood-ns2.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-ns2lite.dts ARM: DT: Kirkwood: Use symbolic names from gpio.h 2013-12-08 01:00:54 +00:00
kirkwood-ns2max.dts ARM: DT: Kirkwood: Use symbolic names from gpio.h 2013-12-08 01:00:54 +00:00
kirkwood-ns2mini.dts ARM: DT: Kirkwood: Use symbolic names from gpio.h 2013-12-08 01:00:54 +00:00
kirkwood-nsa3x0-common.dtsi ARM: SoC devicetree updates for 3.16 2014-06-02 16:34:00 -07:00
kirkwood-nsa310.dts mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
kirkwood-nsa310a.dts mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
kirkwood-nsa320.dts ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood-openblocks_a6.dts mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
kirkwood-openblocks_a7.dts mvebu DT changes for v3.16 2014-05-19 21:55:03 -07:00
kirkwood-openrd-base.dts ARM: Kirkwood: DT versions of OpenRD boards 2014-05-16 05:20:38 +00:00
kirkwood-openrd-client.dts ARM: Kirkwood: DT versions of OpenRD boards 2014-05-16 05:20:38 +00:00
kirkwood-openrd-ultimate.dts ARM: Kirkwood: DT versions of OpenRD boards 2014-05-16 05:20:38 +00:00
kirkwood-openrd.dtsi ARM: Kirkwood: DT versions of OpenRD boards 2014-05-16 05:20:38 +00:00
kirkwood-rd88f6192.dts ARM: dts: kirkwood: set default pinctrl for SPI0 2014-05-05 00:52:55 +00:00
kirkwood-rd88f6281-a0.dts ARM: Kirkwood: convert rd88f6281-setup.c to DT. 2014-02-17 03:01:25 +00:00
kirkwood-rd88f6281-a1.dts ARM: Kirkwood: convert rd88f6281-setup.c to DT. 2014-02-17 03:01:25 +00:00
kirkwood-rd88f6281.dtsi ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood-rs212.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-rs409.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-rs411.dts ARM: dts: kirkwood: add stdout-path property to all boards 2014-05-05 00:48:35 +00:00
kirkwood-sheevaplug-common.dtsi ARM: dts: kirkwood: set default pinctrl for NAND 2014-05-05 00:53:06 +00:00
kirkwood-sheevaplug-esata.dts ARM: DT: Kirkwood: Use symbolic names from gpio.h 2013-12-08 01:00:54 +00:00
kirkwood-sheevaplug.dts ARM: DT: Kirkwood: Use symbolic names from gpio.h 2013-12-08 01:00:54 +00:00
kirkwood-synology.dtsi ARM: dts: kirkwood: set default pinctrl for I2C0 2014-05-05 00:53:15 +00:00
kirkwood-t5325.dts ARM: Kirkwood: t5325: Use simple card to instantiate audio 2014-05-05 01:18:45 +00:00
kirkwood-topkick.dts ARM: dts: kirkwood: set default pinctrl for I2C0 2014-05-05 00:53:15 +00:00
kirkwood-ts219-6281.dts ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood-ts219-6282.dts ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood-ts219.dtsi ARM: dts: kirkwood: set default pinctrl for I2C0 2014-05-05 00:53:15 +00:00
kirkwood-ts419-6281.dts ARM: Kirkwood: Add DT description of QNAP 419 2014-02-05 02:22:07 +00:00
kirkwood-ts419-6282.dts ARM: Kirkwood: Add DT description of QNAP 419 2014-02-05 02:22:07 +00:00
kirkwood-ts419.dtsi ARM: dts: kirkwood: rename pin-controller nodes 2014-05-05 00:51:33 +00:00
kirkwood.dtsi ARM: Kirkwood: DT: Add missing #sound-dai-cells property 2014-05-05 01:18:44 +00:00
kizbox.dts ARM: at91/dt: kizbox: define main crystal frequency 2014-07-09 19:05:18 +02:00
lpc32xx.dtsi
Makefile ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
marco-evb.dts
marco.dtsi ARM: l2c: prima2: convert to generic l2c OF initialisation 2014-05-30 00:49:55 +01:00
mmp2-brownstone.dts
mmp2.dtsi
moxart-uc7112lx.dts ARM: moxart: move fixed rate clock child node to board level dts 2014-01-23 18:13:44 -08:00
moxart.dtsi ARM: moxart: move fixed rate clock child node to board level dts 2014-01-23 18:13:44 -08:00
mpa1600.dts ARM: at91/dt: mpa1600: define crytals frequencies 2014-07-09 19:05:16 +02:00
mt6589-aquaris5.dts arm: mediatek: add dts for Aquaris5 mobile phone 2014-07-22 17:52:38 +02:00
mt6589.dtsi arm: add basic support for Mediatek MT6589 boards 2014-07-22 17:52:37 +02:00
mxs-pinfunc.h ARM: dts: mxs: add pinctrl header files 2013-09-26 13:01:36 +08:00
nspire-classic.dtsi arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
nspire-clp.dts arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
nspire-cx.dts arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
nspire-tp.dts arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
nspire.dtsi arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
omap2.dtsi ARM: dts: OMAP2: Fix interrupts for OMAP2420 mailbox 2014-04-25 09:53:43 -07:00
omap3-beagle-xm-ab.dts ARM: dts: Add support for the BeagleBoard xM A/B 2014-04-18 16:50:23 -07:00
omap3-beagle-xm.dts ARM: dts: Enable twl4030 off-idle configuration for selected omaps 2014-06-16 01:10:22 -07:00
omap3-beagle.dts ARM: omap3-beagle.dts: add display information 2014-03-19 11:11:27 +02:00
omap3-cm-t3x30.dtsi ARM: dts: Fix GPMC Ethernet timings for omap cm-t sbc-t boards for device tree 2014-04-23 11:29:49 -07:00
omap3-cm-t3x.dtsi ARM: dts: cm-t3x30: add HS USB Host support 2014-02-28 14:09:11 -08:00
omap3-cm-t3517.dts ARM: dts: sbc-t3517: add support for sbc-t3517 2014-02-28 14:09:14 -08:00
omap3-cm-t3530.dts ARM: dts: Add MMC2/SDIO/WLAN support for cm-t3530 2014-03-12 10:40:37 -07:00
omap3-cm-t3730.dts ARM: dts: sbc-t3x: refactor DT support 2014-02-28 14:09:08 -08:00
omap3-devkit8000.dts ARM: dts: OMAP2+: remove uses of obsolete gpmc,device-nand 2014-04-18 16:37:43 -07:00
omap3-evm-37xx.dts fbdev changes for 3.16 (omap devicetree) 2014-06-09 18:32:13 -07:00
omap3-evm-common.dtsi ARM: dts: Enable twl4030 off-idle configuration for selected omaps 2014-06-16 01:10:22 -07:00
omap3-evm.dts ARM: dts: Add common support for omap3-evm 2013-10-14 11:34:37 -07:00
omap3-gta04.dts ARM: dts: omap3-gta04: Add display support 2014-06-03 10:22:21 +03:00
omap3-igep0020.dts ARM: dts: omap3-igep0020: use SMSC9221 timings 2014-04-25 09:30:00 -07:00
omap3-igep0030.dts ARM: dts: omap3-igep: fix boot fail due wrong compatible match 2014-02-28 11:29:18 -08:00
omap3-igep.dtsi ARM: dts: omap3-igep0020: use SMSC9221 timings 2014-04-25 09:30:00 -07:00
omap3-ldp.dts fbdev changes for 3.16 (omap devicetree) 2014-06-09 18:32:13 -07:00
omap3-lilly-a83x.dtsi ARM: dts: omap3 a83x: fix duplicate usb pin config 2014-05-27 13:51:01 -07:00
omap3-lilly-dbb056.dts ARM: dts: omap3: Add support for INCOstartec DBB056 baseboard 2014-02-28 15:04:28 -08:00
omap3-n9.dts ARM: dts: N9/N950: fix boot hang with 3.14-rc1 2014-02-13 15:21:36 -08:00
omap3-n900.dts ARM: dts: Revert enabling of twl configuration for n900 2014-07-29 00:16:25 -07:00
omap3-n950-n9.dtsi ARM: dts: n950: Add missing regulator definitions 2014-05-06 10:19:49 -07:00
omap3-n950.dts ARM: dts: N9/N950: fix boot hang with 3.14-rc1 2014-02-13 15:21:36 -08:00
omap3-overo-alto35-common.dtsi ARM: dts: overo: Add support for 3.5'' LCD output 2014-06-03 10:22:23 +03:00
omap3-overo-alto35.dts ARM: dts: Add support for the Overo Alto35 2014-03-12 10:21:14 -07:00
omap3-overo-base.dtsi ARM: dts: overo: Push uart3 pinmux down to expansion board 2014-03-12 10:18:16 -07:00
omap3-overo-chestnut43-common.dtsi ARM: dts: overo: Add support for 4.3'' LCD output 2014-06-03 10:22:22 +03:00
omap3-overo-chestnut43.dts ARM: dts: Add support for the Overo Chestnut43 2014-03-12 10:21:15 -07:00
omap3-overo-common-dvi.dtsi ARM: dts: overo: Add support for DVI output 2014-06-03 10:22:22 +03:00
omap3-overo-common-lcd35.dtsi ARM: dts: overo: Add support for 3.5'' LCD output 2014-06-03 10:22:23 +03:00
omap3-overo-common-lcd43.dtsi ARM: dts: overo: Add support for 4.3'' LCD output 2014-06-03 10:22:22 +03:00
omap3-overo-common-peripherals.dtsi ARM: dts: overo: Add LIS33DE accelerometer 2014-03-12 10:21:12 -07:00
omap3-overo-gallop43-common.dtsi ARM: dts: overo: Add support for 4.3'' LCD output 2014-06-03 10:22:22 +03:00
omap3-overo-gallop43.dts ARM: dts: Add support for the Overo Gallop43 2014-03-12 10:21:14 -07:00
omap3-overo-palo43-common.dtsi ARM: dts: overo: Add support for 4.3'' LCD output 2014-06-03 10:22:22 +03:00
omap3-overo-palo43.dts ARM: dts: Add support for the Overo Palo43 2014-03-12 10:21:13 -07:00
omap3-overo-storm-alto35.dts ARM: dts: Add support for the Overo Alto35 2014-03-12 10:21:14 -07:00
omap3-overo-storm-chestnut43.dts ARM: dts: Add support for the Overo Chestnut43 2014-03-12 10:21:15 -07:00
omap3-overo-storm-gallop43.dts ARM: dts: Add support for the Overo Gallop43 2014-03-12 10:21:14 -07:00
omap3-overo-storm-palo43.dts ARM: dts: Add support for the Overo Palo43 2014-03-12 10:21:13 -07:00
omap3-overo-storm-summit.dts ARM: dts: Add support for the Overo Summit 2014-03-12 10:21:16 -07:00
omap3-overo-storm-tobi.dts ARM: dts: overo: reorganize include files 2014-03-12 10:17:25 -07:00
omap3-overo-storm.dtsi ARM: dts: omap3-overo: Add HSUSB PHY 2014-03-12 10:17:27 -07:00
omap3-overo-summit-common.dtsi ARM: dts: overo: Add support for DVI output 2014-06-03 10:22:22 +03:00
omap3-overo-summit.dts ARM: dts: Add support for the Overo Summit 2014-03-12 10:21:16 -07:00
omap3-overo-tobi-common.dtsi ARM: dts: overo: Add support for DVI output 2014-06-03 10:22:22 +03:00
omap3-overo-tobi.dts ARM: dts: overo: reorganize include files 2014-03-12 10:17:25 -07:00
omap3-overo.dtsi Merge branch '3.15/dss-dt-dts' into 3.15/fbdev 2014-03-20 08:18:27 +02:00
omap3-panel-sharp-ls037v7dw01.dtsi ARM: dts: Add LCD panel sharp ls037v7dw01 support for omap3-evm and ldp 2014-06-03 10:22:21 +03:00
omap3-sb-t35.dtsi ARM: dts: Fix GPMC timings for LAN9220 2014-04-23 11:30:09 -07:00
omap3-sbc-t3517.dts ARM: dts: Fix GPMC Ethernet timings for omap cm-t sbc-t boards for device tree 2014-04-23 11:29:49 -07:00
omap3-sbc-t3530.dts ARM: dts: sbc-t3530: add support for sbc-t3530 2014-02-28 14:09:13 -08:00
omap3-sbc-t3730.dts ARM: dts: sbc-t3730: add pinmux for usb hub reset 2014-02-28 14:09:12 -08:00
omap3-zoom3.dts ARM: dts: Split omap3 pinmux core device 2014-01-07 14:01:39 -08:00
omap3.dtsi ARM: dts: OMAP2+: Add mailbox fifo and user information 2014-07-15 05:08:11 -07:00
omap3xxx-clocks.dtsi ARM: dts: set 'ti,set-rate-parent' for dpll4_m5 path 2014-05-16 17:08:57 +03:00
omap4-cpu-thermal.dtsi arm: dts: add omap4 CPU thermal data 2013-12-04 09:34:25 -04:00
omap4-duovero-parlor.dts ARM: dts: duovero-parlor: Add HDMI output 2014-06-03 10:22:23 +03:00
omap4-duovero.dtsi ARM: dts: Enable mcpdm and mcbsp1 on DuoVero 2014-05-19 17:20:31 -07:00
omap4-panda-a4.dts ARM: dts: OMAP2+: Use pinctrl constants 2013-06-18 18:53:40 -05:00
omap4-panda-common.dtsi ARM: dts: Fix omap serial wake-up when booted with device tree 2014-05-06 13:48:35 -07:00
omap4-panda-es.dts ARM: dts: omap4-panda-es: Do not reset gpio1 2013-10-20 19:16:53 +02:00
omap4-panda.dts ARM: dts: OMAP2+: Use #include for all device trees 2013-06-18 18:53:38 -05:00
omap4-sdp-es23plus.dts ARM: dts: OMAP2+: Use pinctrl constants 2013-06-18 18:53:40 -05:00
omap4-sdp.dts ARM: dts: Fix omap serial wake-up when booted with device tree 2014-05-06 13:48:35 -07:00
omap4-var-dvk-om44.dts ARM: dts: Add VAR-SOM-OM44 WLAN nodes 2014-05-19 17:20:30 -07:00
omap4-var-om44customboard.dtsi ARM: dts: Add support for OMAP4 Variscite OM44 family 2014-05-19 17:20:30 -07:00
omap4-var-som-om44-wlan.dtsi ARM: dts: Add VAR-SOM-OM44 WLAN nodes 2014-05-19 17:20:30 -07:00
omap4-var-som-om44.dtsi ARM: dts: Add support for OMAP4 Variscite OM44 family 2014-05-19 17:20:30 -07:00
omap4-var-stk-om44.dts ARM: dts: Add VAR-SOM-OM44 WLAN nodes 2014-05-19 17:20:30 -07:00
omap4.dtsi ARM: dts: OMAP4: Add mailbox node 2014-07-15 05:08:56 -07:00
omap5-cm-t54.dts ARM: dts: Change IOPAD macro's for OMAP4/5 2014-05-19 17:20:29 -07:00
omap5-core-thermal.dtsi arm: dts: add omap5 CORE thermal data 2013-12-04 09:34:26 -04:00
omap5-gpu-thermal.dtsi arm: dts: add omap5 GPU thermal data 2013-12-04 09:34:26 -04:00
omap5-sbc-t54.dts ARM: dts: Change IOPAD macro's for OMAP4/5 2014-05-19 17:20:29 -07:00
omap5-uevm.dts ARM: DTS: omap5-uevm: Enable basic audio (McPDM <-> twl6040) 2014-07-15 00:21:25 -07:00
omap5.dtsi Merge branch 'next/fixes-non-critical' into next/soc 2014-07-26 17:54:21 +02:00
omap24xx-clocks.dtsi ARM: dts: omap2 clock data 2014-05-28 13:11:36 +03:00
omap34xx-hs.dtsi ARM: dts: Fix booting for secure omaps 2013-12-06 15:30:43 -08:00
omap34xx-omap36xx-clocks.dtsi ARM: dts: omap3 clock data 2014-01-17 12:36:41 -08:00
omap34xx.dtsi ARM: dts: omap3-n900: Add SSI support 2014-05-27 11:59:44 -07:00
omap36xx-am35xx-omap3430es2plus-clocks.dtsi ARM: dts: fix omap3 dss clock handle names 2014-03-19 09:31:47 +02:00
omap36xx-clocks.dtsi ARM: dts: use ti,fixed-factor-clock for dpll4_m5x2_mul_ck 2014-05-16 17:08:57 +03:00
omap36xx-hs.dtsi ARM: dts: Fix booting for secure omaps 2013-12-06 15:30:43 -08:00
omap36xx-omap3430es2plus-clocks.dtsi ARM: dts: omap3 clocks: simplify ssi aliases 2014-02-28 14:02:25 -08:00
omap36xx.dtsi ARM: dts: omap3-n900: Add SSI support 2014-05-27 11:59:44 -07:00
omap44xx-clocks.dtsi ARM: dts: omap4 clock data 2014-01-17 12:35:57 -08:00
omap54xx-clocks.dtsi Merge branch 'for-v3.16/ti-clk-drv' of github.com:t-kristo/linux-pm into clk-next 2014-06-10 16:53:25 -07:00
omap443x-clocks.dtsi ARM: dts: omap4 clock data 2014-01-17 12:35:57 -08:00
omap443x.dtsi ARM: dts: OMAP4: Add device nodes for ABB 2014-03-05 11:53:36 -08:00
omap446x-clocks.dtsi ARM: dts: omap4 clock data 2014-01-17 12:35:57 -08:00
omap2420-clocks.dtsi ARM: dts: omap2 clock data 2014-05-28 13:11:36 +03:00
omap2420-h4.dts ARM: dts: Remove '0x's from OMAP2420 H4 DTS file 2013-10-08 17:51:40 +02:00
omap2420-n8x0-common.dtsi ARM: OMAP2+: dts: add n8x0 onenand 2013-11-25 15:38:09 -08:00
omap2420-n800.dts ARM: dts: Add basic Nokia N8X0 support 2013-11-25 15:15:24 -08:00
omap2420-n810-wimax.dts ARM: dts: Add basic Nokia N8X0 support 2013-11-25 15:15:24 -08:00
omap2420-n810.dts ARM: dts: Add basic Nokia N8X0 support 2013-11-25 15:15:24 -08:00
omap2420.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
omap2430-clocks.dtsi ARM: dts: omap2 clock data 2014-05-28 13:11:36 +03:00
omap2430-sdp.dts ARM: dts: Add basic device tree support for omap2430 sdp 2013-11-25 15:15:23 -08:00
omap2430.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
omap3430-sdp.dts Add craneboard devices 2014-03-02 14:22:03 -08:00
omap3430es1-clocks.dtsi ARM: dts: fix omap3 dss clock handle names 2014-03-19 09:31:47 +02:00
omap4460.dtsi ARM: dts: OMAP4: Add device nodes for ABB 2014-03-05 11:53:36 -08:00
omap-gpmc-smsc911x.dtsi ARM: dts: Fix GPMC timings for LAN9220 2014-04-23 11:30:09 -07:00
omap-gpmc-smsc9221.dtsi ARM: dts: omap: Add common file for SMSC9221 2014-03-12 10:18:16 -07:00
omap-zoom-common.dtsi ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x 2013-11-15 14:33:26 -08:00
orion5x-lacie-d2-network.dts ARM: orion5x: convert d2net to Device Tree 2014-04-26 19:45:24 +00:00
orion5x-lacie-ethernet-disk-mini-v2.dts ARM: orion5x: keep TODO list in edmini_v2 DT 2014-04-26 19:45:19 +00:00
orion5x-maxtor-shared-storage-2.dts ARM: orion5x: convert Maxtor Shared Storage II to the Device Tree 2014-04-26 19:45:25 +00:00
orion5x-mv88f5182.dtsi ARM: orion5x: add standard pinctrl configs for sata0 and sata1 2014-04-26 19:45:13 +00:00
orion5x-rd88f5182-nas.dts ARM: orion5x: convert RD-88F5182 to Device Tree 2014-04-26 19:45:22 +00:00
orion5x.dtsi ARM: orion5x: add Device Bus description at SoC level 2014-04-26 19:45:12 +00:00
phy3250.dts
picoxcell-pc3x2.dtsi
picoxcell-pc3x3.dtsi
picoxcell-pc7302-pc3x2.dts
picoxcell-pc7302-pc3x3.dts
pm9g45.dts ARM: at91/dt: pm9g45: crystals frequencies 2014-07-09 19:05:20 +02:00
prima2-evb.dts
prima2.dtsi Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into next 2014-06-05 15:57:04 -07:00
pxa2xx.dtsi
pxa3xx.dtsi ARM: pxa: DTS: override gpio node in pxa3xx.dtsi 2013-08-13 15:51:02 -07:00
pxa27x.dtsi ARM: pxa: add PWM nodes to pxa27x.dtsi 2013-12-11 16:36:47 -08:00
pxa168-aspenite.dts
pxa168.dtsi
pxa910-dkb.dts
pxa910.dtsi
qcom-apq8064-ifc6410.dts ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees 2014-05-29 10:39:07 -05:00
qcom-apq8064-v2.0.dtsi ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees 2014-05-29 10:39:07 -05:00
qcom-apq8064.dtsi ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees 2014-05-29 10:39:07 -05:00
qcom-apq8074-dragonboard.dts ARM: dts: qcom: Update msm8974/apq8074 device trees 2014-05-28 13:31:45 -05:00
qcom-apq8084-mtp.dts ARM: dts: qcom: Add APQ8084-MTP board support 2014-05-29 11:16:45 -05:00
qcom-apq8084.dtsi ARM: dts: qcom: Add APQ8084 SoC support 2014-05-29 11:16:33 -05:00
qcom-msm8660-surf.dts ARM: dts: qcom: Update msm8660 device trees 2014-05-29 10:35:04 -05:00
qcom-msm8660.dtsi ARM: dts: qcom: Update msm8660 device trees 2014-05-29 10:35:04 -05:00
qcom-msm8960-cdp.dts ARM: dts: qcom: Update msm8960 device trees 2014-05-29 10:35:00 -05:00
qcom-msm8960.dtsi ARM: dts: qcom: Update msm8960 device trees 2014-05-29 10:35:00 -05:00
qcom-msm8974.dtsi ARM: dts: qcom: Update msm8974/apq8074 device trees 2014-05-28 13:31:45 -05:00
r7s72100-genmai.dts ARM: shmobile: genmai reference dts: Add RSPI node 2014-07-06 16:29:34 +02:00
r7s72100.dtsi ARM: shmobile: Update r7s72100 DTS to include CPU frequency 2014-06-17 19:50:33 +09:00
r8a73a4-ape6evm-reference.dts ARM: shmobile: ape6evm-reference: Initialise SCIF device using DT 2014-07-12 15:16:57 +02:00
r8a73a4-ape6evm.dts ARM: shmobile: Include all 2 GiB of memory on APE6EVM 2013-12-10 17:27:17 +09:00
r8a73a4.dtsi ARM: shmobile: r8a73a4: Add SCIF nodes 2014-07-12 15:16:57 +02:00
r8a7740-armadillo800eva-reference.dts ARM: shmobile: armadillo800eva-reference: Initialise SCIF device using DT 2014-07-12 15:16:57 +02:00
r8a7740-armadillo800eva.dts ARM: shmobile: Use #include in device tree sources 2013-12-10 17:27:06 +09:00
r8a7740.dtsi ARM: shmobile: r8a7740: Add SCIF nodes 2014-07-12 15:16:57 +02:00
r8a7778-bockw-reference.dts ARM: shmobile: bockw-reference: Initialise SCIF device using DT 2014-07-12 15:16:56 +02:00
r8a7778-bockw.dts ARM: shmobile: Use #include in device tree sources 2013-12-10 17:27:06 +09:00
r8a7778.dtsi ARM: shmobile: r8a7778: Add SCIF nodes 2014-07-12 15:16:56 +02:00
r8a7779-marzen.dts ARM: shmobile: marzen: Consistently use tabs for indentation 2014-07-09 10:36:01 +02:00
r8a7779.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
r8a7790-lager.dts ARM: shmobile: r8a7790: lager: use iic cores instead of i2c 2014-07-11 10:47:06 +02:00
r8a7790.dtsi ARM: shmobile: r8a7790: Fix whitespace errors in pci nodes 2014-07-01 09:35:35 +09:00
r8a7791-henninger.dts ARM: shmobile: henninger: Consistently use tabs for indentation 2014-07-09 10:28:33 +02:00
r8a7791-koelsch.dts ARM: shmobile: koelsch: enable internal PCI 2014-07-08 11:01:15 +02:00
r8a7791.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
rk3xxx.dtsi ARM: dts: rockchip: add watchdog node 2014-07-30 12:14:44 +02:00
rk3066a-bqcurie2.dts ARM: dts: rockchip: add watchdog node 2014-07-30 12:14:44 +02:00
rk3066a.dtsi ARM: dts: rockchip: add watchdog node 2014-07-30 12:14:44 +02:00
rk3188-radxarock.dts ARM: dts: rockchip: add watchdog node 2014-07-30 12:14:44 +02:00
rk3188.dtsi ARM: dts: rockchip: add watchdog node 2014-07-30 12:14:44 +02:00
rk3288-evb-act8846.dts ARM: dts: add rk3288 evaluation board 2014-07-26 13:07:25 +02:00
rk3288-evb-rk808.dts ARM: dts: add rk3288 evaluation board 2014-07-26 13:07:25 +02:00
rk3288-evb.dtsi ARM: dts: Enable USB host0 (EHCI) on rk3288-evb 2014-07-31 05:35:38 +02:00
rk3288.dtsi ARM: dts: Fix the sort ordering of EHCI and HSIC in rk3288.dtsi 2014-08-09 08:22:41 -07:00
s3c24xx.dtsi ARM: dts: SAMSUNG: Add aliases of UART nodes 2014-07-09 17:22:55 -07:00
s3c64xx-pinctrl.dtsi ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs 2013-09-17 06:48:28 +09:00
s3c64xx.dtsi ARM: dts: SAMSUNG: Add aliases of UART nodes 2014-07-09 17:22:55 -07:00
s3c2416-pinctrl.dtsi
s3c2416-smdk2416.dts ARM: dts: add clock data for s3c2416 2014-04-15 02:11:08 +09:00
s3c2416.dtsi ARM: dts: SAMSUNG: Add aliases of UART nodes 2014-07-09 17:22:55 -07:00
s3c6400.dtsi ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs 2013-09-17 06:48:28 +09:00
s3c6410-mini6410.dts ARM: dts: Add dts file for S3C6410-based Mini6410 board 2013-09-17 06:48:29 +09:00
s3c6410-smdk6410.dts ARM: dts: Add dts file for S3C6410-based SMDK6410 board 2013-09-17 06:48:29 +09:00
s3c6410.dtsi ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs 2013-09-17 06:48:28 +09:00
s5pv210-aquila.dts ARM: dts: Add Device tree for s5pc110/s5pv210 boards 2014-07-19 04:31:51 +09:00
s5pv210-goni.dts ARM: dts: Add Device tree for s5pc110/s5pv210 boards 2014-07-19 04:31:51 +09:00
s5pv210-pinctrl.dtsi ARM: dts: Add Device tree for s5pv210 SoC 2014-07-19 04:31:20 +09:00
s5pv210-smdkc110.dts ARM: dts: Add Device tree for s5pc110/s5pv210 boards 2014-07-19 04:31:51 +09:00
s5pv210-smdkv210.dts ARM: dts: Add Device tree for s5pc110/s5pv210 boards 2014-07-19 04:31:51 +09:00
s5pv210-torbreck.dts ARM: dts: Add Device tree for s5pc110/s5pv210 boards 2014-07-19 04:31:51 +09:00
s5pv210.dtsi ARM: dts: Add Device tree for s5pv210 SoC 2014-07-19 04:31:20 +09:00
sama5d3_can.dtsi ARM: at91/dt: define sama5d3 clocks 2013-12-02 15:31:28 +01:00
sama5d3_emac.dtsi ARM: at91/dt: define sama5d3 clocks 2013-12-02 15:31:28 +01:00
sama5d3_gmac.dtsi ARM: at91: change compatibility string for sama5d3x gem 2014-07-24 23:39:55 -07:00
sama5d3_lcd.dtsi ARM: at91/dt: define sama5d3 clocks 2013-12-02 15:31:28 +01:00
sama5d3_mci2.dtsi dt-bindings: clock: Move at91.h to dt-bindigs/clock 2014-04-18 23:44:52 +02:00
sama5d3_tcb1.dtsi dt-bindings: clock: Move at91.h to dt-bindigs/clock 2014-04-18 23:44:52 +02:00
sama5d3_uart.dtsi dt-bindings: clock: Move at91.h to dt-bindigs/clock 2014-04-18 23:44:52 +02:00
sama5d3.dtsi ARM: at91/dt: sama5d3 crystals under the clocks node 2014-07-09 18:02:45 +02:00
sama5d3xcm.dtsi ARM: at91/dt: sama5d3 crystals under the clocks node 2014-07-09 18:02:45 +02:00
sama5d3xdm.dtsi ARM: at91/dt: sama5d3: remove useless adc properties 2014-03-12 19:11:29 +01:00
sama5d3xmb.dtsi ARM: at91: sama5d3xek: switch sound to CCF 2014-07-09 18:02:45 +02:00
sama5d31.dtsi ARM: at91/dt: split sama5d3 peripheral definitions 2013-10-16 15:47:08 +02:00
sama5d31ek.dts ARM: at91/dt: split sama5d3 peripheral definitions 2013-10-16 15:47:08 +02:00
sama5d33.dtsi ARM: at91/dt: split sama5d3 peripheral definitions 2013-10-16 15:47:08 +02:00
sama5d33ek.dts ARM: at91/dt: split sama5d3 peripheral definitions 2013-10-16 15:47:08 +02:00
sama5d34.dtsi ARM: at91/dt: split sama5d3 peripheral definitions 2013-10-16 15:47:08 +02:00
sama5d34ek.dts ARM: at91/dt: split sama5d3 peripheral definitions 2013-10-16 15:47:08 +02:00
sama5d35.dtsi ARM: at91/dt: split sama5d3 peripheral definitions 2013-10-16 15:47:08 +02:00
sama5d35ek.dts ARM: at91/dt: split sama5d3 peripheral definitions 2013-10-16 15:47:08 +02:00
sama5d36.dtsi ARM: at91: fix network interface ordering for sama5d36 2014-03-11 12:49:10 -07:00
sama5d36ek.dts ARM: at91: sama5d3/dt: add sama5d36ek dts files 2013-12-10 09:59:57 -08:00
samsung_k3pe0e000b.dtsi
sh73a0-kzm9g-reference.dts ARM: shmobile: kzm9g-reference: Initialise SCIF device using DT 2014-07-12 15:16:58 +02:00
sh73a0-kzm9g.dts ARM: shmobile: Use #include in device tree sources 2013-12-10 17:27:06 +09:00
sh73a0.dtsi ARM: shmobile: sh73a0: Add SCIF nodes 2014-07-12 15:16:57 +02:00
sh7372-mackerel.dts ARM: shmobile: Use #include in device tree sources 2013-12-10 17:27:06 +09:00
sh7372.dtsi ARM: shmobile: sh7372: Add pin control device to device tree 2013-07-22 10:12:36 +09:00
skeleton64.dtsi ARM: dts: Fix memory node in skeleton64.dtsi 2013-08-07 16:33:50 +00:00
skeleton.dtsi
socfpga_arria5_socdk.dts ARM: socfpga: dts: Add DTS entries for USB 2014-05-05 22:33:16 -05:00
socfpga_arria5.dtsi ARM: socfpga: dts: Remove hard coded clock-frequency property 2014-05-05 22:33:15 -05:00
socfpga_cyclone5_socdk.dts ARM: socfpga: dts: Add DTS entries for USB 2014-05-05 22:33:16 -05:00
socfpga_cyclone5_sockit.dts ARM: socfpga: dts: Add DTS entries for USB 2014-05-05 22:33:16 -05:00
socfpga_cyclone5_socrates.dts ARM: socfpga: dts: convert to preprocessor includes 2014-05-05 22:33:14 -05:00
socfpga_cyclone5.dtsi ARM: socfpga: dts: Remove hard coded clock-frequency property 2014-05-05 22:33:15 -05:00
socfpga_vt.dts ARM: socfpga: dts: convert to preprocessor includes 2014-05-05 22:33:14 -05:00
socfpga.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
spear3xx.dtsi
spear13xx.dtsi ARM: SPEAr13xx: Add pcie and miphy DT nodes 2014-07-14 11:04:43 +05:30
spear300-evb.dts
spear300.dtsi
spear310-evb.dts
spear310.dtsi
spear320-evb.dts
spear320-hmi.dts Shiraz has moved 2014-04-18 16:40:08 -07:00
spear320.dtsi
spear600-evb.dts
spear600.dtsi
spear1310-evb.dts ARM: SPEAr13xx: Add pcie and miphy DT nodes 2014-07-14 11:04:43 +05:30
spear1310.dtsi ARM: SPEAr13xx: Add pcie and miphy DT nodes 2014-07-14 11:04:43 +05:30
spear1340-evb.dts ARM: SPEAr13xx: Add pcie and miphy DT nodes 2014-07-14 11:04:43 +05:30
spear1340.dtsi ARM: SPEAr13xx: Add pcie and miphy DT nodes 2014-07-14 11:04:43 +05:30
st-pincfg.h ARM: STi: OF: Fix a typo in pincfg header 2013-12-04 08:58:39 +00:00
ste-ccu8540-pinctrl.dtsi ARM: ux500: fix devicetree builds 2013-08-14 22:32:07 +02:00
ste-ccu8540.dts arm: dts: Fix missing device_type="memory" for ste-ccu8540 2014-05-16 15:22:40 +01:00
ste-ccu9540.dts ARM: ux500: Convert to the common mmc DT bindings for highspeed mode 2014-05-12 12:52:40 +02:00
ste-dbx5x0.dtsi ARM: ux500: add some DB8500 DMA channel info 2014-07-07 11:54:06 +02:00
ste-href-ab8500.dtsi ARM: ux500: move AB8500 clock out pins to DT 2014-02-04 20:50:50 +01:00
ste-href-ab8505.dtsi ARM: ux500: move last AB8505 set-up to DT 2014-02-04 20:50:55 +01:00
ste-href-family-pinctrl.dtsi ARM: ux500: move the WLAN GPIO pin setup to the device tree 2013-11-26 21:01:56 +01:00
ste-href-stuib.dtsi ARM: ux500: add VCC and VIO regulators to STMPE IC 2014-07-07 11:53:32 +02:00
ste-href-tvk1281618.dtsi ARM: ux500: add misc sensors to the device trees 2014-07-07 11:54:07 +02:00
ste-href.dtsi ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for href 2014-05-12 12:52:44 +02:00
ste-hrefprev60-stuib.dts ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS 2013-10-03 10:29:24 +02:00
ste-hrefprev60-tvk.dts ARM: ux500: split the HREF DTS files from two to four 2013-10-02 16:17:04 +02:00
ste-hrefprev60.dtsi ARM: ux500: move AB8500 GPIOs to device tree 2014-02-04 20:46:50 +01:00
ste-hrefv60plus-stuib.dts ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS 2013-10-03 10:29:24 +02:00
ste-hrefv60plus-tvk.dts ARM: ux500: split the HREF DTS files from two to four 2013-10-02 16:17:04 +02:00
ste-hrefv60plus.dtsi ARM: ux500: add misc sensors to the device trees 2014-07-07 11:54:07 +02:00
ste-nomadik-pinctrl.dtsi ARM: ux500: move GPIO key configuration to device tree 2013-11-26 21:01:56 +01:00
ste-nomadik-s8815.dts ARM: nomadik: fix up double inversion in DT 2014-07-30 12:47:17 -07:00
ste-nomadik-stn8815.dtsi ARM: nomadik: fix up double inversion in DT 2014-07-30 12:47:17 -07:00
ste-snowball.dts ARM: ux500: add misc sensors to the device trees 2014-07-07 11:54:07 +02:00
ste-u300.dts ARM: u300: Convert to the common mmc DT bindings for highspeed mode 2014-05-12 12:52:41 +02:00
stih41x-b2000.dtsi ARM: STi: DT: STiH41x Add clk_ignore_unused to bootargs 2014-05-21 14:27:14 +02:00
stih41x-b2020.dtsi ARM: STi: DT: STiH41x Add clk_ignore_unused to bootargs 2014-05-21 14:27:14 +02:00
stih41x-b2020x.dtsi ARM: STi: stih41x: Add support for the FSM Serial Flash Controller 2014-03-27 02:01:25 +01:00
stih41x.dtsi ARM: sti: stih41x: Provide a proper header for this DTSI file 2014-05-21 14:27:16 +02:00
stih407-b2120.dts ARM: dts: STiH407: Add B2120 board support 2014-05-21 14:20:33 +02:00
stih407-clock.dtsi ARM: dts: Add STiH407 SoC support 2014-05-21 14:20:27 +02:00
stih407-pinctrl.dtsi ARM: dts: Add STiH407 SoC support 2014-05-21 14:20:27 +02:00
stih407.dtsi ARM: dts: Add STiH407 SoC support 2014-05-21 14:20:27 +02:00
stih415-b2000.dts ARM: dts: Fix STi boards compatibles 2014-05-21 14:20:23 +02:00
stih415-b2020.dts ARM: dts: Fix STi boards compatibles 2014-05-21 14:20:23 +02:00
stih415-clock.dtsi ARM: STi: DT: STiH415: 415 DT Entry for clockgen A9 2014-05-21 14:27:14 +02:00
stih415-pinctrl.dtsi Merge tag 'sti-dt-for-v3.16-1' of git://git.stlinux.com/devel/kernel/linux-sti into next/dt 2014-05-23 22:35:56 +02:00
stih415.dtsi ARM: STi: DT: Properly define sti-ethclk & stmmaceth for stih415/6 2014-06-17 16:55:17 +02:00
stih416-b2000.dts ARM: dts: Fix STi boards compatibles 2014-05-21 14:20:23 +02:00
stih416-b2020.dts ARM: dts: Fix STi boards compatibles 2014-05-21 14:20:23 +02:00
stih416-b2020e.dts ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts 2014-06-19 10:45:36 +02:00
stih416-clock.dtsi ARM: STi: DT: STiH416: 416 DT Entry for clockgen A9/DDR/GPU 2014-05-21 14:27:11 +02:00
stih416-pinctrl.dtsi Merge tag 'sti-dt-for-v3.16-1' of git://git.stlinux.com/devel/kernel/linux-sti into next/dt 2014-05-23 22:35:56 +02:00
stih416.dtsi ARM: STi: DT: Properly define sti-ethclk & stmmaceth for stih415/6 2014-06-17 16:55:17 +02:00
sun4i-a10-a1000.dts ARM: dts: sun4i: Add ir node to various boards 2014-07-01 10:05:38 +02:00
sun4i-a10-ba10-tvbox.dts ARM: dts: sun4i: Add new ba10-tvbox board 2014-07-01 10:01:16 +02:00
sun4i-a10-cubieboard.dts ARM: dts: sun4i: Add ir node to various boards 2014-07-01 10:05:38 +02:00
sun4i-a10-hackberry.dts ARM: dts: sun4i: Add ir node to various boards 2014-07-01 10:05:38 +02:00
sun4i-a10-inet97fv2.dts ARM: dts: sun4i: Add AXP209 support to various boards 2014-07-01 09:48:54 +02:00
sun4i-a10-mini-xplus.dts ARM: dts: sun4i: Add ir node to various boards 2014-07-01 10:05:38 +02:00
sun4i-a10-olinuxino-lime.dts ARM: dts: sun4i: Add AXP209 support to various boards 2014-07-01 09:48:54 +02:00
sun4i-a10-pcduino.dts ARM: dts: sun4i: Add AXP209 support to various boards 2014-07-01 09:48:54 +02:00
sun4i-a10.dtsi ARM: dts: sun4i: Add ir controller nodes and pinmux 2014-07-01 10:05:20 +02:00
sun5i-a10s-olinuxino-micro.dts ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes 2014-05-11 19:07:07 +02:00
sun5i-a10s-r7-tv-dongle.dts ARM: dts: sun5i: Add new A10s r7 hdmi tv dongle board 2014-05-12 17:06:55 +02:00
sun5i-a10s.dtsi ARM: dts: sunxi: Add #interrupt-cells to pinctrl nodes 2014-07-01 09:48:53 +02:00
sun5i-a13-olinuxino-micro.dts ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes 2014-05-11 19:07:07 +02:00
sun5i-a13-olinuxino.dts ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes 2014-05-11 19:07:07 +02:00
sun5i-a13.dtsi ARM: dts: sunxi: Add #interrupt-cells to pinctrl nodes 2014-07-01 09:48:53 +02:00
sun6i-a31-app4-evb1.dts ARM: sunxi: dt: add APP4-EVB1 board support 2014-05-14 14:30:05 +02:00
sun6i-a31-colombus.dts ARM: sun6i: Add MMC0 controller to the Colombus board 2014-05-22 10:49:21 +02:00
sun6i-a31-hummingbird.dts ARM: dts: sun6i: Add Merrii A31 Hummingbird support 2014-07-18 22:40:37 +02:00
sun6i-a31-m9.dts ARM: dts: sun6i: Add reg_vcc3v3 to sun6i board mmc nodes 2014-05-11 19:07:10 +02:00
sun6i-a31.dtsi ARM: dts: sun6i: Add ethernet alias for GMAC 2014-07-18 22:36:54 +02:00
sun7i-a20-cubieboard2.dts ARM: dts: sun7i: Add AXP209 support to various boards 2014-07-01 09:48:54 +02:00
sun7i-a20-cubietruck.dts ARM: dts: sun7i: Add AXP209 support to various boards 2014-07-01 09:48:54 +02:00
sun7i-a20-i12-tvbox.dts ARM: dts: sun7i: Add ir receiver support to a20-i12-tvbox 2014-07-01 09:48:55 +02:00
sun7i-a20-olinuxino-micro.dts ARM: dts: sun7i: Add AXP209 support to various boards 2014-07-01 09:48:54 +02:00
sun7i-a20-pcduino3.dts ARM: dts: sun7i: Add board support for LinkSprite pcDuino V3 2014-07-01 09:49:37 +02:00
sun7i-a20.dtsi ARM: dts: sun7i: Rename sun7i-a20-ir to sun4i-a10-ir 2014-07-01 09:48:55 +02:00
sun8i-a23-ippo-q8h-v5.dts ARM: sun8i: dt: Add Ippo-q8h v5 support 2014-07-01 09:48:50 +02:00
sun8i-a23.dtsi ARM: sun8i: Add PRCM clock and reset controller nodes to the DTSI 2014-07-15 08:54:16 +02:00
sunxi-common-regulators.dtsi ARM: sunxi: Add fixed 3V regulator 2014-05-21 10:23:32 +02:00
tegra20-colibri-512.dtsi ARM: SoC DT updates for 3.14 2014-01-23 18:45:38 -08:00
tegra20-harmony.dts ARM: tegra: Remove legacy PCIe power supply properties 2014-07-18 11:20:10 +02:00
tegra20-iris-512.dts ARM: tegra: convert dts files of Tegra20 platforms to use pinctrl defines 2013-12-16 14:09:20 -07:00
tegra20-medcom-wide.dts ARM: tegra: tamonten: add the display to the Medcom Wide 2014-07-17 15:02:10 +02:00
tegra20-paz00.dts ARM: tegra: paz00: Fix some indentation inconsistencies 2014-07-30 12:48:52 -07:00
tegra20-plutux.dts ARM: tegra: tamonten: add the base board regulators 2014-07-17 15:02:09 +02:00
tegra20-seaboard.dts ARM: tegra: enable LCD panel on Seaboard 2014-02-19 10:15:37 -07:00
tegra20-tamonten.dtsi ARM: SoC driver changes for 3.17 2014-08-08 11:34:32 -07:00
tegra20-tec.dts ARM: tegra: tamonten: add the base board regulators 2014-07-17 15:02:09 +02:00
tegra20-trimslice.dts ARM: tegra: Remove legacy PCIe power supply properties 2014-07-18 11:20:10 +02:00
tegra20-ventana.dts ARM: tegra: enable LCD panel on Ventana 2014-02-19 10:15:45 -07:00
tegra20-whistler.dts ARM: tegra: set up /aliases entries for RTCs 2013-12-18 14:10:48 -07:00
tegra20.dtsi ARM: SoC cleanups for 3.17 2014-08-08 11:00:26 -07:00
tegra30-apalis-eval.dts ARM: tegra: apalis t30: fix device tree compatible node 2014-07-30 12:49:00 -07:00
tegra30-apalis.dtsi ARM: tegra: Migrate Apalis T30 PCIe power supply scheme 2014-07-17 15:02:10 +02:00
tegra30-beaver.dts ARM: tegra: Remove legacy PCIe power supply properties 2014-07-18 11:20:10 +02:00
tegra30-cardhu-a02.dts ARM: tegra: fix node sort order 2013-12-16 14:09:17 -07:00
tegra30-cardhu-a04.dts ARM: tegra: fix node sort order 2013-12-16 14:09:17 -07:00
tegra30-cardhu.dtsi ARM: tegra: Remove legacy PCIe power supply properties 2014-07-18 11:20:10 +02:00
tegra30-colibri-eval-v3.dts ARM: tegra: initial add of Colibri T30 2014-05-15 12:30:40 -06:00
tegra30-colibri.dtsi ARM: tegra: initial add of Colibri T30 2014-05-15 12:30:40 -06:00
tegra30.dtsi ARM: SoC cleanups for 3.17 2014-08-08 11:00:26 -07:00
tegra114-dalmore.dts ARM: tegra: add SD wp-gpios to Dalmore DT 2014-04-29 10:09:54 -06:00
tegra114-roth.dts ARM: tegra: roth: add display DT node 2014-07-17 15:02:14 +02:00
tegra114-tn7.dts ARM: tegra: add Tegra Note 7 device tree 2014-05-02 12:17:11 -06:00
tegra114.dtsi ARM: SoC cleanups for 3.17 2014-08-08 11:00:26 -07:00
tegra124-jetson-tk1.dts ARM: tegra: Fix typoed ams,ext-control properties 2014-07-17 15:02:13 +02:00
tegra124-venice2.dts ARM: tegra: Fix typoed ams,ext-control properties 2014-07-17 15:02:13 +02:00
tegra124.dtsi ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
tny_a9g20.dts
tny_a9260_common.dtsi ARM: at91/dt: tny_a9260: define crystals frequencies 2014-07-09 19:05:15 +02:00
tny_a9260.dts
tny_a9263.dts ARM: at91/dt: tny_a9263: define crystals frequencies 2014-07-09 19:05:22 +02:00
tps6507x.dtsi
tps65217.dtsi
tps65910.dtsi ARM: dts: tps65910 backup battery regulator 2014-02-28 13:52:25 -08:00
twl4030_omap3.dtsi ARM: dts: Configure omap3 twl4030 I2C4 pins by default 2014-05-06 15:45:14 -07:00
twl4030.dtsi ARM: dts: twl4030: Add madc 2014-05-06 10:19:49 -07:00
twl6030_omap4.dtsi ARM: dts: twl6030: Move common configuration for OMAP4 boards in a separate dtsi file 2013-10-08 17:51:41 +02:00
twl6030.dtsi
usb_a9g20_common.dtsi
usb_a9g20_lpw.dts
usb_a9g20-dab-mmx.dtsi
usb_a9g20.dts
usb_a9260_common.dtsi ARM: at91/dt: usb_a9260: define crystals frequencies 2014-07-09 19:05:14 +02:00
usb_a9260.dts
usb_a9263.dts ARM: at91/dt: usb_a9263: define crystals frequencies 2014-07-09 19:05:23 +02:00
versatile-ab.dts The branch contains the following device tree changes the v3.17 merge 2014-08-14 09:53:39 -06:00
versatile-pb.dts The branch contains the following device tree changes the v3.17 merge 2014-08-14 09:53:39 -06:00
vexpress-v2m-rs1.dtsi mfd: vexpress: Define the device as MFD cells 2014-05-15 17:02:19 +01:00
vexpress-v2m.dtsi mfd: vexpress: Define the device as MFD cells 2014-05-15 17:02:19 +01:00
vexpress-v2p-ca5s.dts dts: ca5: add the global timer for the A5 2014-04-22 11:44:26 +02:00
vexpress-v2p-ca9.dts
vexpress-v2p-ca15_a7.dts mfd: vexpress: Convert custom func API to regmap 2014-05-15 17:02:18 +01:00
vexpress-v2p-ca15-tc1.dts
vf610-colibri.dts ARM: dts: add initial Colibri VF61 board support 2014-05-16 23:01:49 +08:00
vf610-cosmic.dts ARM: dts: vf610: make pinctrl nodes board specific 2014-02-09 21:32:28 +08:00
vf610-pinfunc.h
vf610-twr.dts ARM: dts: vf610-twr: Enables FTM PWM device. 2014-05-16 23:01:45 +08:00
vf610.dtsi ARM: dts: vf610: add FlexCAN node 2014-07-18 16:49:47 +08:00
vt8500-bv07.dts
vt8500.dtsi net: via-rhine: add OF bus binding 2014-04-23 15:24:06 -04:00
wm8505-ref.dts
wm8505.dtsi
wm8650-mid.dts
wm8650.dtsi net: via-rhine: add OF bus binding 2014-04-23 15:24:06 -04:00
wm8750-apc8750.dts
wm8750.dtsi
wm8850-w70v2.dts ARM: dts: Use the PWM polarity flags 2013-09-03 13:08:11 +02:00
wm8850.dtsi net: via-rhine: add OF bus binding 2014-04-23 15:24:06 -04:00
xenvm-4.2.dts
zynq-7000.dtsi ARM: zynq: DT: Add CAN node 2014-07-29 07:31:40 +02:00
zynq-parallella.dts ARM: zynq: DT: Remove DMA from board DTs 2014-07-29 07:33:02 +02:00
zynq-zc702.dts ARM: zynq: DT: Add CAN node 2014-07-29 07:31:40 +02:00
zynq-zc706.dts ARM: zynq: dt: Add I2C nodes to Zynq device tree 2014-04-22 09:30:49 +02:00
zynq-zed.dts ARM: dts: zynq: Add SDHCI nodes 2014-01-31 14:58:56 -08:00