linux_dsm_epyc7002/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
Zhicheng Fan b5dc298687 powerpc/85xx: Add ucc uart support for p1025rdb
Add device tree nodes to enable ucc uart support on P1025RDB.

Signed-off-by: Zhicheng Fan <B32736@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10 07:56:45 -05:00

247 lines
5.9 KiB
Plaintext

/*
* P1021/P1012 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011-2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
interrupts = <19 2 0 0>;
};
/* controller at 0x9000 */
&pci0 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
>;
};
};
/* controller at 0xa000 */
&pci1 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,p1021-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,p1021-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <16 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,p1021-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <16 2 0 0>;
};
/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
/include/ "pq3-duart-0.dtsi"
/include/ "pq3-espi-0.dtsi"
spi@7000 {
fsl,espi-num-chipselects = <4>;
};
/include/ "pq3-gpio-0.dtsi"
L2: l2-cache-controller@20000 {
compatible = "fsl,p1021-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2,256K
interrupts = <16 2 0 0>;
};
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
usb@22000 {
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
};
/include/ "pq3-esdhc-0.dtsi"
sdhc@2e000 {
sdhci,auto-cmd12;
};
/include/ "pq3-sec3.3-0.dtsi"
/include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi"
/include/ "pq3-etsec2-0.dtsi"
enet0: enet0_grp2: ethernet@b0000 {
};
/include/ "pq3-etsec2-1.dtsi"
enet1: enet1_grp2: ethernet@b1000 {
};
/include/ "pq3-etsec2-2.dtsi"
enet2: enet2_grp2: ethernet@b2000 {
};
global-utilities@e0000 {
compatible = "fsl,p1021-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
&qe {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
fsl,qe-num-riscs = <1>;
fsl,qe-num-snums = <28>;
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44
};
ucc@2000 {
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
};
mdio@2120 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2120 0x18>;
compatible = "fsl,ucc-mdio";
};
ucc@2400 {
cell-index = <5>;
reg = <0x2400 0x200>;
interrupts = <40>;
interrupt-parent = <&qeic>;
};
ucc@2600 {
cell-index = <7>;
reg = <0x2600 0x200>;
interrupts = <42>;
interrupt-parent = <&qeic>;
};
ucc@2200 {
cell-index = <3>;
reg = <0x2200 0x200>;
interrupts = <34>;
interrupt-parent = <&qeic>;
};
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x10000 0x6000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0x0 0x6000>;
};
};
};
/include/ "pq3-etsec2-grp2-0.dtsi"
/include/ "pq3-etsec2-grp2-1.dtsi"
/include/ "pq3-etsec2-grp2-2.dtsi"