AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-13 01:36:55 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
4f2de3bf17
linux_dsm_epyc7002/drivers/mtd/onenand/onenand_base.c
Mike Dunn edbc4540e0 mtd: driver _read() returns max_bitflips; mtd_read() returns -EUCLEAN 
The drivers' _read() method, absent an error, returns a non-negative integer
indicating the maximum number of bit errors that were corrected in any one
region comprising an ecc step.  MTD returns -EUCLEAN if this is >=
bitflip_threshold, 0 otherwise.  If bitflip_threshold is zero, the comparison is
not made since these devices lack ECC and always return zero in the non-error
case (thanks Brian)¹.  Note that this is a subtle change to the driver
interface.

This and the preceding patches in this set were tested with ubi on top of the
nandsim and docg4 devices, running the ubi test io_basic from mtd-utils.

¹ http://lists.infradead.org/pipermail/linux-mtd/2012-March/040468.html

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Ivan Djelic <ivan.djelic@parrot.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-05-13 23:14:23 -05:00

4165 lines
108 KiB
C
Raw Blame History

/*
* linux/drivers/mtd/onenand/onenand_base.c
*
* Copyright © 2005-2009 Samsung Electronics
* Copyright © 2007 Nokia Corporation
*
* Kyungmin Park <kyungmin.park@samsung.com>
*
* Credits:
* Adrian Hunter <ext-adrian.hunter@nokia.com>:
* auto-placement support, read-while load support, various fixes
*
* Vishak G <vishak.g at samsung.com>, Rohit Hagargundgi <h.rohit at samsung.com>
* Flex-OneNAND support
* Amul Kumar Saha <amul.saha at samsung.com>
* OTP support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/onenand.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
/*
* Multiblock erase if number of blocks to erase is 2 or more.
* Maximum number of blocks for simultaneous erase is 64.
*/
#define MB_ERASE_MIN_BLK_COUNT 2
#define MB_ERASE_MAX_BLK_COUNT 64
/* Default Flex-OneNAND boundary and lock respectively */
static int flex_bdry[MAX_DIES * 2] = { -1, 0, -1, 0 };
module_param_array(flex_bdry, int, NULL, 0400);
MODULE_PARM_DESC(flex_bdry, "SLC Boundary information for Flex-OneNAND"
"Syntax:flex_bdry=DIE_BDRY,LOCK,..."
"DIE_BDRY: SLC boundary of the die"
"LOCK: Locking information for SLC boundary"
" : 0->Set boundary in unlocked status"
" : 1->Set boundary in locked status");
/* Default OneNAND/Flex-OneNAND OTP options*/
static int otp;
module_param(otp, int, 0400);
MODULE_PARM_DESC(otp, "Corresponding behaviour of OneNAND in OTP"
"Syntax : otp=LOCK_TYPE"
"LOCK_TYPE : Keys issued, for specific OTP Lock type"
" : 0 -> Default (No Blocks Locked)"
" : 1 -> OTP Block lock"
" : 2 -> 1st Block lock"
" : 3 -> BOTH OTP Block and 1st Block lock");
/*
* flexonenand_oob_128 - oob info for Flex-Onenand with 4KB page
* For now, we expose only 64 out of 80 ecc bytes
*/
static struct nand_ecclayout flexonenand_oob_128 = {
.eccbytes = 64,
.eccpos = {
6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
86, 87, 88, 89, 90, 91, 92, 93, 94, 95,
102, 103, 104, 105
},
.oobfree = {
{2, 4}, {18, 4}, {34, 4}, {50, 4},
{66, 4}, {82, 4}, {98, 4}, {114, 4}
}
};
/*
* onenand_oob_128 - oob info for OneNAND with 4KB page
*
* Based on specification:
* 4Gb M-die OneNAND Flash (KFM4G16Q4M, KFN8G16Q4M). Rev. 1.3, Apr. 2010
*
* For eccpos we expose only 64 bytes out of 72 (see struct nand_ecclayout)
*
* oobfree uses the spare area fields marked as
* "Managed by internal ECC logic for Logical Sector Number area"
*/
static struct nand_ecclayout onenand_oob_128 = {
.eccbytes = 64,
.eccpos = {
7, 8, 9, 10, 11, 12, 13, 14, 15,
23, 24, 25, 26, 27, 28, 29, 30, 31,
39, 40, 41, 42, 43, 44, 45, 46, 47,
55, 56, 57, 58, 59, 60, 61, 62, 63,
71, 72, 73, 74, 75, 76, 77, 78, 79,
87, 88, 89, 90, 91, 92, 93, 94, 95,
103, 104, 105, 106, 107, 108, 109, 110, 111,
119
},
.oobfree = {
{2, 3}, {18, 3}, {34, 3}, {50, 3},
{66, 3}, {82, 3}, {98, 3}, {114, 3}
}
};
/**
* onenand_oob_64 - oob info for large (2KB) page
*/
static struct nand_ecclayout onenand_oob_64 = {
.eccbytes = 20,
.eccpos = {
8, 9, 10, 11, 12,
24, 25, 26, 27, 28,
40, 41, 42, 43, 44,
56, 57, 58, 59, 60,
},
.oobfree = {
{2, 3}, {14, 2}, {18, 3}, {30, 2},
{34, 3}, {46, 2}, {50, 3}, {62, 2}
}
};
/**
* onenand_oob_32 - oob info for middle (1KB) page
*/
static struct nand_ecclayout onenand_oob_32 = {
.eccbytes = 10,
.eccpos = {
8, 9, 10, 11, 12,
24, 25, 26, 27, 28,
},
.oobfree = { {2, 3}, {14, 2}, {18, 3}, {30, 2} }
};
static const unsigned char ffchars[] = {
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 16 */
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 32 */
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 48 */
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 64 */
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 80 */
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 96 */
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 112 */
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 128 */
};
/**
* onenand_readw - [OneNAND Interface] Read OneNAND register
* @param addr address to read
*
* Read OneNAND register
*/
static unsigned short onenand_readw(void __iomem *addr)
{
return readw(addr);
}
/**
* onenand_writew - [OneNAND Interface] Write OneNAND register with value
* @param value value to write
* @param addr address to write
*
* Write OneNAND register with value
*/
static void onenand_writew(unsigned short value, void __iomem *addr)
{
writew(value, addr);
}
/**
* onenand_block_address - [DEFAULT] Get block address
* @param this onenand chip data structure
* @param block the block
* @return translated block address if DDP, otherwise same
*
* Setup Start Address 1 Register (F100h)
*/
static int onenand_block_address(struct onenand_chip *this, int block)
{
/* Device Flash Core select, NAND Flash Block Address */
if (block & this->density_mask)
return ONENAND_DDP_CHIP1 | (block ^ this->density_mask);
return block;
}
/**
* onenand_bufferram_address - [DEFAULT] Get bufferram address
* @param this onenand chip data structure
* @param block the block
* @return set DBS value if DDP, otherwise 0
*
* Setup Start Address 2 Register (F101h) for DDP
*/
static int onenand_bufferram_address(struct onenand_chip *this, int block)
{
/* Device BufferRAM Select */
if (block & this->density_mask)
return ONENAND_DDP_CHIP1;
return ONENAND_DDP_CHIP0;
}
/**
* onenand_page_address - [DEFAULT] Get page address
* @param page the page address
* @param sector the sector address
* @return combined page and sector address
*
* Setup Start Address 8 Register (F107h)
*/
static int onenand_page_address(int page, int sector)
{
/* Flash Page Address, Flash Sector Address */
int fpa, fsa;
fpa = page & ONENAND_FPA_MASK;
fsa = sector & ONENAND_FSA_MASK;
return ((fpa << ONENAND_FPA_SHIFT) | fsa);
}
/**
* onenand_buffer_address - [DEFAULT] Get buffer address
* @param dataram1 DataRAM index
* @param sectors the sector address
* @param count the number of sectors
* @return the start buffer value
*
* Setup Start Buffer Register (F200h)
*/
static int onenand_buffer_address(int dataram1, int sectors, int count)
{
int bsa, bsc;
/* BufferRAM Sector Address */
bsa = sectors & ONENAND_BSA_MASK;
if (dataram1)
bsa |= ONENAND_BSA_DATARAM1; /* DataRAM1 */
else
bsa |= ONENAND_BSA_DATARAM0; /* DataRAM0 */
/* BufferRAM Sector Count */
bsc = count & ONENAND_BSC_MASK;
return ((bsa << ONENAND_BSA_SHIFT) | bsc);
}
/**
* flexonenand_block- For given address return block number
* @param this - OneNAND device structure
* @param addr - Address for which block number is needed
*/
static unsigned flexonenand_block(struct onenand_chip *this, loff_t addr)
{
unsigned boundary, blk, die = 0;
if (ONENAND_IS_DDP(this) && addr >= this->diesize[0]) {
die = 1;
addr -= this->diesize[0];
}
boundary = this->boundary[die];
blk = addr >> (this->erase_shift - 1);
if (blk > boundary)
blk = (blk + boundary + 1) >> 1;
blk += die ? this->density_mask : 0;
return blk;
}
inline unsigned onenand_block(struct onenand_chip *this, loff_t addr)
{
if (!FLEXONENAND(this))
return addr >> this->erase_shift;
return flexonenand_block(this, addr);
}
/**
* flexonenand_addr - Return address of the block
* @this: OneNAND device structure
* @block: Block number on Flex-OneNAND
*
* Return address of the block
*/
static loff_t flexonenand_addr(struct onenand_chip *this, int block)
{
loff_t ofs = 0;
int die = 0, boundary;
if (ONENAND_IS_DDP(this) && block >= this->density_mask) {
block -= this->density_mask;
die = 1;
ofs = this->diesize[0];
}
boundary = this->boundary[die];
ofs += (loff_t)block << (this->erase_shift - 1);
if (block > (boundary + 1))
ofs += (loff_t)(block - boundary - 1) << (this->erase_shift - 1);
return ofs;
}
loff_t onenand_addr(struct onenand_chip *this, int block)
{
if (!FLEXONENAND(this))
return (loff_t)block << this->erase_shift;
return flexonenand_addr(this, block);
}
EXPORT_SYMBOL(onenand_addr);
/**
* onenand_get_density - [DEFAULT] Get OneNAND density
* @param dev_id OneNAND device ID
*
* Get OneNAND density from device ID
*/
static inline int onenand_get_density(int dev_id)
{
int density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
return (density & ONENAND_DEVICE_DENSITY_MASK);
}
/**
* flexonenand_region - [Flex-OneNAND] Return erase region of addr
* @param mtd MTD device structure
* @param addr address whose erase region needs to be identified
*/
int flexonenand_region(struct mtd_info *mtd, loff_t addr)
{
int i;
for (i = 0; i < mtd->numeraseregions; i++)
if (addr < mtd->eraseregions[i].offset)
break;
return i - 1;
}
EXPORT_SYMBOL(flexonenand_region);
/**
* onenand_command - [DEFAULT] Send command to OneNAND device
* @param mtd MTD device structure
* @param cmd the command to be sent
* @param addr offset to read from or write to
* @param len number of bytes to read or write
*
* Send command to OneNAND device. This function is used for middle/large page
* devices (1KB/2KB Bytes per page)
*/
static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t len)
{
struct onenand_chip *this = mtd->priv;
int value, block, page;
/* Address translation */
switch (cmd) {
case ONENAND_CMD_UNLOCK:
case ONENAND_CMD_LOCK:
case ONENAND_CMD_LOCK_TIGHT:
case ONENAND_CMD_UNLOCK_ALL:
block = -1;
page = -1;
break;
case FLEXONENAND_CMD_PI_ACCESS:
/* addr contains die index */
block = addr * this->density_mask;
page = -1;
break;
case ONENAND_CMD_ERASE:
case ONENAND_CMD_MULTIBLOCK_ERASE:
case ONENAND_CMD_ERASE_VERIFY:
case ONENAND_CMD_BUFFERRAM:
case ONENAND_CMD_OTP_ACCESS:
block = onenand_block(this, addr);
page = -1;
break;
case FLEXONENAND_CMD_READ_PI:
cmd = ONENAND_CMD_READ;
block = addr * this->density_mask;
page = 0;
break;
default:
block = onenand_block(this, addr);
if (FLEXONENAND(this))
page = (int) (addr - onenand_addr(this, block))>>\
this->page_shift;
else
page = (int) (addr >> this->page_shift);
if (ONENAND_IS_2PLANE(this)) {
/* Make the even block number */
block &= ~1;
/* Is it the odd plane? */
if (addr & this->writesize)
block++;
page >>= 1;
}
page &= this->page_mask;
break;
}
/* NOTE: The setting order of the registers is very important! */
if (cmd == ONENAND_CMD_BUFFERRAM) {
/* Select DataRAM for DDP */
value = onenand_bufferram_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
if (ONENAND_IS_2PLANE(this) || ONENAND_IS_4KB_PAGE(this))
/* It is always BufferRAM0 */
ONENAND_SET_BUFFERRAM0(this);
else
/* Switch to the next data buffer */
ONENAND_SET_NEXT_BUFFERRAM(this);
return 0;
}
if (block != -1) {
/* Write 'DFS, FBA' of Flash */
value = onenand_block_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
/* Select DataRAM for DDP */
value = onenand_bufferram_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
}
if (page != -1) {
/* Now we use page size operation */
int sectors = 0, count = 0;
int dataram;
switch (cmd) {
case FLEXONENAND_CMD_RECOVER_LSB:
case ONENAND_CMD_READ:
case ONENAND_CMD_READOOB:
if (ONENAND_IS_4KB_PAGE(this))
/* It is always BufferRAM0 */
dataram = ONENAND_SET_BUFFERRAM0(this);
else
dataram = ONENAND_SET_NEXT_BUFFERRAM(this);
break;
default:
if (ONENAND_IS_2PLANE(this) && cmd == ONENAND_CMD_PROG)
cmd = ONENAND_CMD_2X_PROG;
dataram = ONENAND_CURRENT_BUFFERRAM(this);
break;
}
/* Write 'FPA, FSA' of Flash */
value = onenand_page_address(page, sectors);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS8);
/* Write 'BSA, BSC' of DataRAM */
value = onenand_buffer_address(dataram, sectors, count);
this->write_word(value, this->base + ONENAND_REG_START_BUFFER);
}
/* Interrupt clear */
this->write_word(ONENAND_INT_CLEAR, this->base + ONENAND_REG_INTERRUPT);
/* Write command */
this->write_word(cmd, this->base + ONENAND_REG_COMMAND);
return 0;
}
/**
* onenand_read_ecc - return ecc status
* @param this onenand chip structure
*/
static inline int onenand_read_ecc(struct onenand_chip *this)
{
int ecc, i, result = 0;
if (!FLEXONENAND(this) && !ONENAND_IS_4KB_PAGE(this))
return this->read_word(this->base + ONENAND_REG_ECC_STATUS);
for (i = 0; i < 4; i++) {
ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS + i*2);
if (likely(!ecc))
continue;
if (ecc & FLEXONENAND_UNCORRECTABLE_ERROR)
return ONENAND_ECC_2BIT_ALL;
else
result = ONENAND_ECC_1BIT_ALL;
}
return result;
}
/**
* onenand_wait - [DEFAULT] wait until the command is done
* @param mtd MTD device structure
* @param state state to select the max. timeout value
*
* Wait for command done. This applies to all OneNAND command
* Read can take up to 30us, erase up to 2ms and program up to 350us
* according to general OneNAND specs
*/
static int onenand_wait(struct mtd_info *mtd, int state)
{
struct onenand_chip * this = mtd->priv;
unsigned long timeout;
unsigned int flags = ONENAND_INT_MASTER;
unsigned int interrupt = 0;
unsigned int ctrl;
/* The 20 msec is enough */
timeout = jiffies + msecs_to_jiffies(20);
while (time_before(jiffies, timeout)) {
interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
if (interrupt & flags)
break;
if (state != FL_READING && state != FL_PREPARING_ERASE)
cond_resched();
}
/* To get correct interrupt status in timeout case */
interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
/*
* In the Spec. it checks the controller status first
* However if you get the correct information in case of
* power off recovery (POR) test, it should read ECC status first
*/
if (interrupt & ONENAND_INT_READ) {
int ecc = onenand_read_ecc(this);
if (ecc) {
if (ecc & ONENAND_ECC_2BIT_ALL) {
printk(KERN_ERR "%s: ECC error = 0x%04x\n",
__func__, ecc);
mtd->ecc_stats.failed++;
return -EBADMSG;
} else if (ecc & ONENAND_ECC_1BIT_ALL) {
printk(KERN_DEBUG "%s: correctable ECC error = 0x%04x\n",
__func__, ecc);
mtd->ecc_stats.corrected++;
}
}
} else if (state == FL_READING) {
printk(KERN_ERR "%s: read timeout! ctrl=0x%04x intr=0x%04x\n",
__func__, ctrl, interrupt);
return -EIO;
}
if (state == FL_PREPARING_ERASE && !(interrupt & ONENAND_INT_ERASE)) {
printk(KERN_ERR "%s: mb erase timeout! ctrl=0x%04x intr=0x%04x\n",
__func__, ctrl, interrupt);
return -EIO;
}
if (!(interrupt & ONENAND_INT_MASTER)) {
printk(KERN_ERR "%s: timeout! ctrl=0x%04x intr=0x%04x\n",
__func__, ctrl, interrupt);
return -EIO;
}
/* If there's controller error, it's a real error */
if (ctrl & ONENAND_CTRL_ERROR) {
printk(KERN_ERR "%s: controller error = 0x%04x\n",
__func__, ctrl);
if (ctrl & ONENAND_CTRL_LOCK)
printk(KERN_ERR "%s: it's locked error.\n", __func__);
return -EIO;
}
return 0;
}
/*
* onenand_interrupt - [DEFAULT] onenand interrupt handler
* @param irq onenand interrupt number
* @param dev_id interrupt data
*
* complete the work
*/
static irqreturn_t onenand_interrupt(int irq, void *data)
{
struct onenand_chip *this = data;
/* To handle shared interrupt */
if (!this->complete.done)
complete(&this->complete);
return IRQ_HANDLED;
}
/*
* onenand_interrupt_wait - [DEFAULT] wait until the command is done
* @param mtd MTD device structure
* @param state state to select the max. timeout value
*
* Wait for command done.
*/
static int onenand_interrupt_wait(struct mtd_info *mtd, int state)
{
struct onenand_chip *this = mtd->priv;
wait_for_completion(&this->complete);
return onenand_wait(mtd, state);
}
/*
* onenand_try_interrupt_wait - [DEFAULT] try interrupt wait
* @param mtd MTD device structure
* @param state state to select the max. timeout value
*
* Try interrupt based wait (It is used one-time)
*/
static int onenand_try_interrupt_wait(struct mtd_info *mtd, int state)
{
struct onenand_chip *this = mtd->priv;
unsigned long remain, timeout;
/* We use interrupt wait first */
this->wait = onenand_interrupt_wait;
timeout = msecs_to_jiffies(100);
remain = wait_for_completion_timeout(&this->complete, timeout);
if (!remain) {
printk(KERN_INFO "OneNAND: There's no interrupt. "
"We use the normal wait\n");
/* Release the irq */
free_irq(this->irq, this);
this->wait = onenand_wait;
}
return onenand_wait(mtd, state);
}
/*
* onenand_setup_wait - [OneNAND Interface] setup onenand wait method
* @param mtd MTD device structure
*
* There's two method to wait onenand work
* 1. polling - read interrupt status register
* 2. interrupt - use the kernel interrupt method
*/
static void onenand_setup_wait(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
int syscfg;
init_completion(&this->complete);
if (this->irq <= 0) {
this->wait = onenand_wait;
return;
}
if (request_irq(this->irq, &onenand_interrupt,
IRQF_SHARED, "onenand", this)) {
/* If we can't get irq, use the normal wait */
this->wait = onenand_wait;
return;
}
/* Enable interrupt */
syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
syscfg |= ONENAND_SYS_CFG1_IOBE;
this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
this->wait = onenand_try_interrupt_wait;
}
/**
* onenand_bufferram_offset - [DEFAULT] BufferRAM offset
* @param mtd MTD data structure
* @param area BufferRAM area
* @return offset given area
*
* Return BufferRAM offset given area
*/
static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area)
{
struct onenand_chip *this = mtd->priv;
if (ONENAND_CURRENT_BUFFERRAM(this)) {
/* Note: the 'this->writesize' is a real page size */
if (area == ONENAND_DATARAM)
return this->writesize;
if (area == ONENAND_SPARERAM)
return mtd->oobsize;
}
return 0;
}
/**
* onenand_read_bufferram - [OneNAND Interface] Read the bufferram area
* @param mtd MTD data structure
* @param area BufferRAM area
* @param buffer the databuffer to put/get data
* @param offset offset to read from or write to
* @param count number of bytes to read/write
*
* Read the BufferRAM area
*/
static int onenand_read_bufferram(struct mtd_info *mtd, int area,
unsigned char *buffer, int offset, size_t count)
{
struct onenand_chip *this = mtd->priv;
void __iomem *bufferram;
bufferram = this->base + area;
bufferram += onenand_bufferram_offset(mtd, area);
if (ONENAND_CHECK_BYTE_ACCESS(count)) {
unsigned short word;
/* Align with word(16-bit) size */
count--;
/* Read word and save byte */
word = this->read_word(bufferram + offset + count);
buffer[count] = (word & 0xff);
}
memcpy(buffer, bufferram + offset, count);
return 0;
}
/**
* onenand_sync_read_bufferram - [OneNAND Interface] Read the bufferram area with Sync. Burst mode
* @param mtd MTD data structure
* @param area BufferRAM area
* @param buffer the databuffer to put/get data
* @param offset offset to read from or write to
* @param count number of bytes to read/write
*
* Read the BufferRAM area with Sync. Burst Mode
*/
static int onenand_sync_read_bufferram(struct mtd_info *mtd, int area,
unsigned char *buffer, int offset, size_t count)
{
struct onenand_chip *this = mtd->priv;
void __iomem *bufferram;
bufferram = this->base + area;
bufferram += onenand_bufferram_offset(mtd, area);
this->mmcontrol(mtd, ONENAND_SYS_CFG1_SYNC_READ);
if (ONENAND_CHECK_BYTE_ACCESS(count)) {
unsigned short word;
/* Align with word(16-bit) size */
count--;
/* Read word and save byte */
word = this->read_word(bufferram + offset + count);
buffer[count] = (word & 0xff);
}
memcpy(buffer, bufferram + offset, count);
this->mmcontrol(mtd, 0);
return 0;
}
/**
* onenand_write_bufferram - [OneNAND Interface] Write the bufferram area
* @param mtd MTD data structure
* @param area BufferRAM area
* @param buffer the databuffer to put/get data
* @param offset offset to read from or write to
* @param count number of bytes to read/write
*
* Write the BufferRAM area
*/
static int onenand_write_bufferram(struct mtd_info *mtd, int area,
const unsigned char *buffer, int offset, size_t count)
{
struct onenand_chip *this = mtd->priv;
void __iomem *bufferram;
bufferram = this->base + area;
bufferram += onenand_bufferram_offset(mtd, area);
if (ONENAND_CHECK_BYTE_ACCESS(count)) {
unsigned short word;
int byte_offset;
/* Align with word(16-bit) size */
count--;
/* Calculate byte access offset */
byte_offset = offset + count;
/* Read word and save byte */
word = this->read_word(bufferram + byte_offset);
word = (word & ~0xff) | buffer[count];
this->write_word(word, bufferram + byte_offset);
}
memcpy(bufferram + offset, buffer, count);
return 0;
}
/**
* onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode
* @param mtd MTD data structure
* @param addr address to check
* @return blockpage address
*
* Get blockpage address at 2x program mode
*/
static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr)
{
struct onenand_chip *this = mtd->priv;
int blockpage, block, page;
/* Calculate the even block number */
block = (int) (addr >> this->erase_shift) & ~1;
/* Is it the odd plane? */
if (addr & this->writesize)
block++;
page = (int) (addr >> (this->page_shift + 1)) & this->page_mask;
blockpage = (block << 7) | page;
return blockpage;
}
/**
* onenand_check_bufferram - [GENERIC] Check BufferRAM information
* @param mtd MTD data structure
* @param addr address to check
* @return 1 if there are valid data, otherwise 0
*
* Check bufferram if there is data we required
*/
static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
{
struct onenand_chip *this = mtd->priv;
int blockpage, found = 0;
unsigned int i;
if (ONENAND_IS_2PLANE(this))
blockpage = onenand_get_2x_blockpage(mtd, addr);
else
blockpage = (int) (addr >> this->page_shift);
/* Is there valid data? */
i = ONENAND_CURRENT_BUFFERRAM(this);
if (this->bufferram[i].blockpage == blockpage)
found = 1;
else {
/* Check another BufferRAM */
i = ONENAND_NEXT_BUFFERRAM(this);
if (this->bufferram[i].blockpage == blockpage) {
ONENAND_SET_NEXT_BUFFERRAM(this);
found = 1;
}
}
if (found && ONENAND_IS_DDP(this)) {
/* Select DataRAM for DDP */
int block = onenand_block(this, addr);
int value = onenand_bufferram_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
}
return found;
}
/**
* onenand_update_bufferram - [GENERIC] Update BufferRAM information
* @param mtd MTD data structure
* @param addr address to update
* @param valid valid flag
*
* Update BufferRAM information
*/
static void onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
int valid)
{
struct onenand_chip *this = mtd->priv;
int blockpage;
unsigned int i;
if (ONENAND_IS_2PLANE(this))
blockpage = onenand_get_2x_blockpage(mtd, addr);
else
blockpage = (int) (addr >> this->page_shift);
/* Invalidate another BufferRAM */
i = ONENAND_NEXT_BUFFERRAM(this);
if (this->bufferram[i].blockpage == blockpage)
this->bufferram[i].blockpage = -1;
/* Update BufferRAM */
i = ONENAND_CURRENT_BUFFERRAM(this);
if (valid)
this->bufferram[i].blockpage = blockpage;
else
this->bufferram[i].blockpage = -1;
}
/**
* onenand_invalidate_bufferram - [GENERIC] Invalidate BufferRAM information
* @param mtd MTD data structure
* @param addr start address to invalidate
* @param len length to invalidate
*
* Invalidate BufferRAM information
*/
static void onenand_invalidate_bufferram(struct mtd_info *mtd, loff_t addr,
unsigned int len)
{
struct onenand_chip *this = mtd->priv;
int i;
loff_t end_addr = addr + len;
/* Invalidate BufferRAM */
for (i = 0; i < MAX_BUFFERRAM; i++) {
loff_t buf_addr = this->bufferram[i].blockpage << this->page_shift;
if (buf_addr >= addr && buf_addr < end_addr)
this->bufferram[i].blockpage = -1;
}
}
/**
* onenand_get_device - [GENERIC] Get chip for selected access
* @param mtd MTD device structure
* @param new_state the state which is requested
*
* Get the device and lock it for exclusive access
*/
static int onenand_get_device(struct mtd_info *mtd, int new_state)
{
struct onenand_chip *this = mtd->priv;
DECLARE_WAITQUEUE(wait, current);
/*
* Grab the lock and see if the device is available
*/
while (1) {
spin_lock(&this->chip_lock);
if (this->state == FL_READY) {
this->state = new_state;
spin_unlock(&this->chip_lock);
if (new_state != FL_PM_SUSPENDED && this->enable)
this->enable(mtd);
break;
}
if (new_state == FL_PM_SUSPENDED) {
spin_unlock(&this->chip_lock);
return (this->state == FL_PM_SUSPENDED) ? 0 : -EAGAIN;
}
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&this->wq, &wait);
spin_unlock(&this->chip_lock);
schedule();
remove_wait_queue(&this->wq, &wait);
}
return 0;
}
/**
* onenand_release_device - [GENERIC] release chip
* @param mtd MTD device structure
*
* Deselect, release chip lock and wake up anyone waiting on the device
*/
static void onenand_release_device(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
if (this->state != FL_PM_SUSPENDED && this->disable)
this->disable(mtd);
/* Release the chip */
spin_lock(&this->chip_lock);
this->state = FL_READY;
wake_up(&this->wq);
spin_unlock(&this->chip_lock);
}
/**
* onenand_transfer_auto_oob - [INTERN] oob auto-placement transfer
* @param mtd MTD device structure
* @param buf destination address
* @param column oob offset to read from
* @param thislen oob length to read
*/
static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int column,
int thislen)
{
struct onenand_chip *this = mtd->priv;
struct nand_oobfree *free;
int readcol = column;
int readend = column + thislen;
int lastgap = 0;
unsigned int i;
uint8_t *oob_buf = this->oob_buf;
free = this->ecclayout->oobfree;
for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
if (readcol >= lastgap)
readcol += free->offset - lastgap;
if (readend >= lastgap)
readend += free->offset - lastgap;
lastgap = free->offset + free->length;
}
this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
free = this->ecclayout->oobfree;
for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
int free_end = free->offset + free->length;
if (free->offset < readend && free_end > readcol) {
int st = max_t(int,free->offset,readcol);
int ed = min_t(int,free_end,readend);
int n = ed - st;
memcpy(buf, oob_buf + st, n);
buf += n;
} else if (column == 0)
break;
}
return 0;
}
/**
* onenand_recover_lsb - [Flex-OneNAND] Recover LSB page data
* @param mtd MTD device structure
* @param addr address to recover
* @param status return value from onenand_wait / onenand_bbt_wait
*
* MLC NAND Flash cell has paired pages - LSB page and MSB page. LSB page has
* lower page address and MSB page has higher page address in paired pages.
* If power off occurs during MSB page program, the paired LSB page data can
* become corrupt. LSB page recovery read is a way to read LSB page though page
* data are corrupted. When uncorrectable error occurs as a result of LSB page
* read after power up, issue LSB page recovery read.
*/
static int onenand_recover_lsb(struct mtd_info *mtd, loff_t addr, int status)
{
struct onenand_chip *this = mtd->priv;
int i;
/* Recovery is only for Flex-OneNAND */
if (!FLEXONENAND(this))
return status;
/* check if we failed due to uncorrectable error */
if (!mtd_is_eccerr(status) && status != ONENAND_BBT_READ_ECC_ERROR)
return status;
/* check if address lies in MLC region */
i = flexonenand_region(mtd, addr);
if (mtd->eraseregions[i].erasesize < (1 << this->erase_shift))
return status;
/* We are attempting to reread, so decrement stats.failed
* which was incremented by onenand_wait due to read failure
*/
printk(KERN_INFO "%s: Attempting to recover from uncorrectable read\n",
__func__);
mtd->ecc_stats.failed--;
/* Issue the LSB page recovery command */
this->command(mtd, FLEXONENAND_CMD_RECOVER_LSB, addr, this->writesize);
return this->wait(mtd, FL_READING);
}
/**
* onenand_mlc_read_ops_nolock - MLC OneNAND read main and/or out-of-band
* @param mtd MTD device structure
* @param from offset to read from
* @param ops: oob operation description structure
*
* MLC OneNAND / Flex-OneNAND has 4KB page size and 4KB dataram.
* So, read-while-load is not present.
*/
static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
struct onenand_chip *this = mtd->priv;
struct mtd_ecc_stats stats;
size_t len = ops->len;
size_t ooblen = ops->ooblen;
u_char *buf = ops->datbuf;
u_char *oobbuf = ops->oobbuf;
int read = 0, column, thislen;
int oobread = 0, oobcolumn, thisooblen, oobsize;
int ret = 0;
int writesize = this->writesize;
pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
(int)len);
if (ops->mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
oobcolumn = from & (mtd->oobsize - 1);
/* Do not allow reads past end of device */
if (from + len > mtd->size) {
printk(KERN_ERR "%s: Attempt read beyond end of device\n",
__func__);
ops->retlen = 0;
ops->oobretlen = 0;
return -EINVAL;
}
stats = mtd->ecc_stats;
while (read < len) {
cond_resched();
thislen = min_t(int, writesize, len - read);
column = from & (writesize - 1);
if (column + thislen > writesize)
thislen = writesize - column;
if (!onenand_check_bufferram(mtd, from)) {
this->command(mtd, ONENAND_CMD_READ, from, writesize);
ret = this->wait(mtd, FL_READING);
if (unlikely(ret))
ret = onenand_recover_lsb(mtd, from, ret);
onenand_update_bufferram(mtd, from, !ret);
if (mtd_is_eccerr(ret))
ret = 0;
if (ret)
break;
}
this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
if (oobbuf) {
thisooblen = oobsize - oobcolumn;
thisooblen = min_t(int, thisooblen, ooblen - oobread);
if (ops->mode == MTD_OPS_AUTO_OOB)
onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
else
this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
oobread += thisooblen;
oobbuf += thisooblen;
oobcolumn = 0;
}
read += thislen;
if (read == len)
break;
from += thislen;
buf += thislen;
}
/*
* Return success, if no ECC failures, else -EBADMSG
* fs driver will take care of that, because
* retlen == desired len and result == -EBADMSG
*/
ops->retlen = read;
ops->oobretlen = oobread;
if (ret)
return ret;
if (mtd->ecc_stats.failed - stats.failed)
return -EBADMSG;
/* return max bitflips per ecc step; ONENANDs correct 1 bit only */
return mtd->ecc_stats.corrected != stats.corrected ? 1 : 0;
}
/**
* onenand_read_ops_nolock - [OneNAND Interface] OneNAND read main and/or out-of-band
* @param mtd MTD device structure
* @param from offset to read from
* @param ops: oob operation description structure
*
* OneNAND read main and/or out-of-band data
*/
static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
struct onenand_chip *this = mtd->priv;
struct mtd_ecc_stats stats;
size_t len = ops->len;
size_t ooblen = ops->ooblen;
u_char *buf = ops->datbuf;
u_char *oobbuf = ops->oobbuf;
int read = 0, column, thislen;
int oobread = 0, oobcolumn, thisooblen, oobsize;
int ret = 0, boundary = 0;
int writesize = this->writesize;
pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
(int)len);
if (ops->mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
oobcolumn = from & (mtd->oobsize - 1);
/* Do not allow reads past end of device */
if ((from + len) > mtd->size) {
printk(KERN_ERR "%s: Attempt read beyond end of device\n",
__func__);
ops->retlen = 0;
ops->oobretlen = 0;
return -EINVAL;
}
stats = mtd->ecc_stats;
/* Read-while-load method */
/* Do first load to bufferRAM */
if (read < len) {
if (!onenand_check_bufferram(mtd, from)) {
this->command(mtd, ONENAND_CMD_READ, from, writesize);
ret = this->wait(mtd, FL_READING);
onenand_update_bufferram(mtd, from, !ret);
if (mtd_is_eccerr(ret))
ret = 0;
}
}
thislen = min_t(int, writesize, len - read);
column = from & (writesize - 1);
if (column + thislen > writesize)
thislen = writesize - column;
while (!ret) {
/* If there is more to load then start next load */
from += thislen;
if (read + thislen < len) {
this->command(mtd, ONENAND_CMD_READ, from, writesize);
/*
* Chip boundary handling in DDP
* Now we issued chip 1 read and pointed chip 1
* bufferram so we have to point chip 0 bufferram.
*/
if (ONENAND_IS_DDP(this) &&
unlikely(from == (this->chipsize >> 1))) {
this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2);
boundary = 1;
} else
boundary = 0;
ONENAND_SET_PREV_BUFFERRAM(this);
}
/* While load is going, read from last bufferRAM */
this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
/* Read oob area if needed */
if (oobbuf) {
thisooblen = oobsize - oobcolumn;
thisooblen = min_t(int, thisooblen, ooblen - oobread);
if (ops->mode == MTD_OPS_AUTO_OOB)
onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
else
this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
oobread += thisooblen;
oobbuf += thisooblen;
oobcolumn = 0;
}
/* See if we are done */
read += thislen;
if (read == len)
break;
/* Set up for next read from bufferRAM */
if (unlikely(boundary))
this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
ONENAND_SET_NEXT_BUFFERRAM(this);
buf += thislen;
thislen = min_t(int, writesize, len - read);
column = 0;
cond_resched();
/* Now wait for load */
ret = this->wait(mtd, FL_READING);
onenand_update_bufferram(mtd, from, !ret);
if (mtd_is_eccerr(ret))
ret = 0;
}
/*
* Return success, if no ECC failures, else -EBADMSG
* fs driver will take care of that, because
* retlen == desired len and result == -EBADMSG
*/
ops->retlen = read;
ops->oobretlen = oobread;
if (ret)
return ret;
if (mtd->ecc_stats.failed - stats.failed)
return -EBADMSG;
/* return max bitflips per ecc step; ONENANDs correct 1 bit only */
return mtd->ecc_stats.corrected != stats.corrected ? 1 : 0;
}
/**
* onenand_read_oob_nolock - [MTD Interface] OneNAND read out-of-band
* @param mtd MTD device structure
* @param from offset to read from
* @param ops: oob operation description structure
*
* OneNAND read out-of-band data from the spare area
*/
static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
struct onenand_chip *this = mtd->priv;
struct mtd_ecc_stats stats;
int read = 0, thislen, column, oobsize;
size_t len = ops->ooblen;
unsigned int mode = ops->mode;
u_char *buf = ops->oobbuf;
int ret = 0, readcmd;
from += ops->ooboffs;
pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
(int)len);
/* Initialize return length value */
ops->oobretlen = 0;
if (mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
column = from & (mtd->oobsize - 1);
if (unlikely(column >= oobsize)) {
printk(KERN_ERR "%s: Attempted to start read outside oob\n",
__func__);
return -EINVAL;
}
/* Do not allow reads past end of device */
if (unlikely(from >= mtd->size ||
column + len > ((mtd->size >> this->page_shift) -
(from >> this->page_shift)) * oobsize)) {
printk(KERN_ERR "%s: Attempted to read beyond end of device\n",
__func__);
return -EINVAL;
}
stats = mtd->ecc_stats;
readcmd = ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
while (read < len) {
cond_resched();
thislen = oobsize - column;
thislen = min_t(int, thislen, len);
this->command(mtd, readcmd, from, mtd->oobsize);
onenand_update_bufferram(mtd, from, 0);
ret = this->wait(mtd, FL_READING);
if (unlikely(ret))
ret = onenand_recover_lsb(mtd, from, ret);
if (ret && !mtd_is_eccerr(ret)) {
printk(KERN_ERR "%s: read failed = 0x%x\n",
__func__, ret);
break;
}
if (mode == MTD_OPS_AUTO_OOB)
onenand_transfer_auto_oob(mtd, buf, column, thislen);
else
this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
read += thislen;
if (read == len)
break;
buf += thislen;
/* Read more? */
if (read < len) {
/* Page size */
from += mtd->writesize;
column = 0;
}
}
ops->oobretlen = read;
if (ret)
return ret;
if (mtd->ecc_stats.failed - stats.failed)
return -EBADMSG;
return 0;
}
/**
* onenand_read - [MTD Interface] Read data from flash
* @param mtd MTD device structure
* @param from offset to read from
* @param len number of bytes to read
* @param retlen pointer to variable to store the number of read bytes
* @param buf the databuffer to put data
*
* Read with ecc
*/
static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
struct onenand_chip *this = mtd->priv;
struct mtd_oob_ops ops = {
.len = len,
.ooblen = 0,
.datbuf = buf,
.oobbuf = NULL,
};
int ret;
onenand_get_device(mtd, FL_READING);
ret = ONENAND_IS_4KB_PAGE(this) ?
onenand_mlc_read_ops_nolock(mtd, from, &ops) :
onenand_read_ops_nolock(mtd, from, &ops);
onenand_release_device(mtd);
*retlen = ops.retlen;
return ret;
}
/**
* onenand_read_oob - [MTD Interface] Read main and/or out-of-band
* @param mtd: MTD device structure
* @param from: offset to read from
* @param ops: oob operation description structure
* Read main and/or out-of-band
*/
static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
struct onenand_chip *this = mtd->priv;
int ret;
switch (ops->mode) {
case MTD_OPS_PLACE_OOB:
case MTD_OPS_AUTO_OOB:
break;
case MTD_OPS_RAW:
/* Not implemented yet */
default:
return -EINVAL;
}
onenand_get_device(mtd, FL_READING);
if (ops->datbuf)
ret = ONENAND_IS_4KB_PAGE(this) ?
onenand_mlc_read_ops_nolock(mtd, from, ops) :
onenand_read_ops_nolock(mtd, from, ops);
else
ret = onenand_read_oob_nolock(mtd, from, ops);
onenand_release_device(mtd);
return ret;
}
/**
* onenand_bbt_wait - [DEFAULT] wait until the command is done
* @param mtd MTD device structure
* @param state state to select the max. timeout value
*
* Wait for command done.
*/
static int onenand_bbt_wait(struct mtd_info *mtd, int state)
{
struct onenand_chip *this = mtd->priv;
unsigned long timeout;
unsigned int interrupt, ctrl, ecc, addr1, addr8;
/* The 20 msec is enough */
timeout = jiffies + msecs_to_jiffies(20);
while (time_before(jiffies, timeout)) {
interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
if (interrupt & ONENAND_INT_MASTER)
break;
}
/* To get correct interrupt status in timeout case */
interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
addr1 = this->read_word(this->base + ONENAND_REG_START_ADDRESS1);
addr8 = this->read_word(this->base + ONENAND_REG_START_ADDRESS8);
if (interrupt & ONENAND_INT_READ) {
ecc = onenand_read_ecc(this);
if (ecc & ONENAND_ECC_2BIT_ALL) {
printk(KERN_DEBUG "%s: ecc 0x%04x ctrl 0x%04x "
"intr 0x%04x addr1 %#x addr8 %#x\n",
__func__, ecc, ctrl, interrupt, addr1, addr8);
return ONENAND_BBT_READ_ECC_ERROR;
}
} else {
printk(KERN_ERR "%s: read timeout! ctrl 0x%04x "
"intr 0x%04x addr1 %#x addr8 %#x\n",
__func__, ctrl, interrupt, addr1, addr8);
return ONENAND_BBT_READ_FATAL_ERROR;
}
/* Initial bad block case: 0x2400 or 0x0400 */
if (ctrl & ONENAND_CTRL_ERROR) {
printk(KERN_DEBUG "%s: ctrl 0x%04x intr 0x%04x addr1 %#x "
"addr8 %#x\n", __func__, ctrl, interrupt, addr1, addr8);
return ONENAND_BBT_READ_ERROR;
}
return 0;
}
/**
* onenand_bbt_read_oob - [MTD Interface] OneNAND read out-of-band for bbt scan
* @param mtd MTD device structure
* @param from offset to read from
* @param ops oob operation description structure
*
* OneNAND read out-of-band data from the spare area for bbt scan
*/
int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
struct onenand_chip *this = mtd->priv;
int read = 0, thislen, column;
int ret = 0, readcmd;
size_t len = ops->ooblen;
u_char *buf = ops->oobbuf;
pr_debug("%s: from = 0x%08x, len = %zi\n", __func__, (unsigned int)from,
len);
/* Initialize return value */
ops->oobretlen = 0;
/* Do not allow reads past end of device */
if (unlikely((from + len) > mtd->size)) {
printk(KERN_ERR "%s: Attempt read beyond end of device\n",
__func__);
return ONENAND_BBT_READ_FATAL_ERROR;
}
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_READING);
column = from & (mtd->oobsize - 1);
readcmd = ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
while (read < len) {
cond_resched();
thislen = mtd->oobsize - column;
thislen = min_t(int, thislen, len);
this->command(mtd, readcmd, from, mtd->oobsize);
onenand_update_bufferram(mtd, from, 0);
ret = this->bbt_wait(mtd, FL_READING);
if (unlikely(ret))
ret = onenand_recover_lsb(mtd, from, ret);
if (ret)
break;
this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
read += thislen;
if (read == len)
break;
buf += thislen;
/* Read more? */
if (read < len) {
/* Update Page size */
from += this->writesize;
column = 0;
}
}
/* Deselect and wake up anyone waiting on the device */
onenand_release_device(mtd);
ops->oobretlen = read;
return ret;
}
#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
/**
* onenand_verify_oob - [GENERIC] verify the oob contents after a write
* @param mtd MTD device structure
* @param buf the databuffer to verify
* @param to offset to read from
*/
static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to)
{
struct onenand_chip *this = mtd->priv;
u_char *oob_buf = this->oob_buf;
int status, i, readcmd;
readcmd = ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
this->command(mtd, readcmd, to, mtd->oobsize);
onenand_update_bufferram(mtd, to, 0);
status = this->wait(mtd, FL_READING);
if (status)
return status;
this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
for (i = 0; i < mtd->oobsize; i++)
if (buf[i] != 0xFF && buf[i] != oob_buf[i])
return -EBADMSG;
return 0;
}
/**
* onenand_verify - [GENERIC] verify the chip contents after a write
* @param mtd MTD device structure
* @param buf the databuffer to verify
* @param addr offset to read from
* @param len number of bytes to read and compare
*/
static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr, size_t len)
{
struct onenand_chip *this = mtd->priv;
int ret = 0;
int thislen, column;
column = addr & (this->writesize - 1);
while (len != 0) {
thislen = min_t(int, this->writesize - column, len);
this->command(mtd, ONENAND_CMD_READ, addr, this->writesize);
onenand_update_bufferram(mtd, addr, 0);
ret = this->wait(mtd, FL_READING);
if (ret)
return ret;
onenand_update_bufferram(mtd, addr, 1);
this->read_bufferram(mtd, ONENAND_DATARAM, this->verify_buf, 0, mtd->writesize);
if (memcmp(buf, this->verify_buf + column, thislen))
return -EBADMSG;
len -= thislen;
buf += thislen;
addr += thislen;
column = 0;
}
return 0;
}
#else
#define onenand_verify(...) (0)
#define onenand_verify_oob(...) (0)
#endif
#define NOTALIGNED(x) ((x & (this->subpagesize - 1)) != 0)
static void onenand_panic_wait(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
unsigned int interrupt;
int i;
for (i = 0; i < 2000; i++) {
interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
if (interrupt & ONENAND_INT_MASTER)
break;
udelay(10);
}
}
/**
* onenand_panic_write - [MTD Interface] write buffer to FLASH in a panic context
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
* @param retlen pointer to variable to store the number of written bytes
* @param buf the data to write
*
* Write with ECC
*/
static int onenand_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
struct onenand_chip *this = mtd->priv;
int column, subpage;
int written = 0;
int ret = 0;
if (this->state == FL_PM_SUSPENDED)
return -EBUSY;
/* Wait for any existing operation to clear */
onenand_panic_wait(mtd);
pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to,
(int)len);
/* Reject writes, which are not page aligned */
if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) {
printk(KERN_ERR "%s: Attempt to write not page aligned data\n",
__func__);
return -EINVAL;
}
column = to & (mtd->writesize - 1);
/* Loop until all data write */
while (written < len) {
int thislen = min_t(int, mtd->writesize - column, len - written);
u_char *wbuf = (u_char *) buf;
this->command(mtd, ONENAND_CMD_BUFFERRAM, to, thislen);
/* Partial page write */
subpage = thislen < mtd->writesize;
if (subpage) {
memset(this->page_buf, 0xff, mtd->writesize);
memcpy(this->page_buf + column, buf, thislen);
wbuf = this->page_buf;
}
this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, mtd->writesize);
this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize);
this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
onenand_panic_wait(mtd);
/* In partial page write we don't update bufferram */
onenand_update_bufferram(mtd, to, !ret && !subpage);
if (ONENAND_IS_2PLANE(this)) {
ONENAND_SET_BUFFERRAM1(this);
onenand_update_bufferram(mtd, to + this->writesize, !ret && !subpage);
}
if (ret) {
printk(KERN_ERR "%s: write failed %d\n", __func__, ret);
break;
}
written += thislen;
if (written == len)
break;
column = 0;
to += thislen;
buf += thislen;
}
*retlen = written;
return ret;
}
/**
* onenand_fill_auto_oob - [INTERN] oob auto-placement transfer
* @param mtd MTD device structure
* @param oob_buf oob buffer
* @param buf source address
* @param column oob offset to write to
* @param thislen oob length to write
*/
static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
const u_char *buf, int column, int thislen)
{
struct onenand_chip *this = mtd->priv;
struct nand_oobfree *free;
int writecol = column;
int writeend = column + thislen;
int lastgap = 0;
unsigned int i;
free = this->ecclayout->oobfree;
for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
if (writecol >= lastgap)
writecol += free->offset - lastgap;
if (writeend >= lastgap)
writeend += free->offset - lastgap;
lastgap = free->offset + free->length;
}
free = this->ecclayout->oobfree;
for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
int free_end = free->offset + free->length;
if (free->offset < writeend && free_end > writecol) {
int st = max_t(int,free->offset,writecol);
int ed = min_t(int,free_end,writeend);
int n = ed - st;
memcpy(oob_buf + st, buf, n);
buf += n;
} else if (column == 0)
break;
}
return 0;
}
/**
* onenand_write_ops_nolock - [OneNAND Interface] write main and/or out-of-band
* @param mtd MTD device structure
* @param to offset to write to
* @param ops oob operation description structure
*
* Write main and/or oob with ECC
*/
static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
{
struct onenand_chip *this = mtd->priv;
int written = 0, column, thislen = 0, subpage = 0;
int prev = 0, prevlen = 0, prev_subpage = 0, first = 1;
int oobwritten = 0, oobcolumn, thisooblen, oobsize;
size_t len = ops->len;
size_t ooblen = ops->ooblen;
const u_char *buf = ops->datbuf;
const u_char *oob = ops->oobbuf;
u_char *oobbuf;
int ret = 0, cmd;
pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to,
(int)len);
/* Initialize retlen, in case of early exit */
ops->retlen = 0;
ops->oobretlen = 0;
/* Reject writes, which are not page aligned */
if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) {
printk(KERN_ERR "%s: Attempt to write not page aligned data\n",
__func__);
return -EINVAL;
}
/* Check zero length */
if (!len)
return 0;
if (ops->mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
oobcolumn = to & (mtd->oobsize - 1);
column = to & (mtd->writesize - 1);
/* Loop until all data write */
while (1) {
if (written < len) {
u_char *wbuf = (u_char *) buf;
thislen = min_t(int, mtd->writesize - column, len - written);
thisooblen = min_t(int, oobsize - oobcolumn, ooblen - oobwritten);
cond_resched();
this->command(mtd, ONENAND_CMD_BUFFERRAM, to, thislen);
/* Partial page write */
subpage = thislen < mtd->writesize;
if (subpage) {
memset(this->page_buf, 0xff, mtd->writesize);
memcpy(this->page_buf + column, buf, thislen);
wbuf = this->page_buf;
}
this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, mtd->writesize);
if (oob) {
oobbuf = this->oob_buf;
/* We send data to spare ram with oobsize
* to prevent byte access */
memset(oobbuf, 0xff, mtd->oobsize);
if (ops->mode == MTD_OPS_AUTO_OOB)
onenand_fill_auto_oob(mtd, oobbuf, oob, oobcolumn, thisooblen);
else
memcpy(oobbuf + oobcolumn, oob, thisooblen);
oobwritten += thisooblen;
oob += thisooblen;
oobcolumn = 0;
} else
oobbuf = (u_char *) ffchars;
this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
} else
ONENAND_SET_NEXT_BUFFERRAM(this);
/*
* 2 PLANE, MLC, and Flex-OneNAND do not support
* write-while-program feature.
*/
if (!ONENAND_IS_2PLANE(this) && !ONENAND_IS_4KB_PAGE(this) && !first) {
ONENAND_SET_PREV_BUFFERRAM(this);
ret = this->wait(mtd, FL_WRITING);
/* In partial page write we don't update bufferram */
onenand_update_bufferram(mtd, prev, !ret && !prev_subpage);
if (ret) {
written -= prevlen;
printk(KERN_ERR "%s: write failed %d\n",
__func__, ret);
break;
}
if (written == len) {
/* Only check verify write turn on */
ret = onenand_verify(mtd, buf - len, to - len, len);
if (ret)
printk(KERN_ERR "%s: verify failed %d\n",
__func__, ret);
break;
}
ONENAND_SET_NEXT_BUFFERRAM(this);
}
this->ongoing = 0;
cmd = ONENAND_CMD_PROG;
/* Exclude 1st OTP and OTP blocks for cache program feature */
if (ONENAND_IS_CACHE_PROGRAM(this) &&
likely(onenand_block(this, to) != 0) &&
ONENAND_IS_4KB_PAGE(this) &&
((written + thislen) < len)) {
cmd = ONENAND_CMD_2X_CACHE_PROG;
this->ongoing = 1;
}
this->command(mtd, cmd, to, mtd->writesize);
/*
* 2 PLANE, MLC, and Flex-OneNAND wait here
*/
if (ONENAND_IS_2PLANE(this) || ONENAND_IS_4KB_PAGE(this)) {
ret = this->wait(mtd, FL_WRITING);
/* In partial page write we don't update bufferram */
onenand_update_bufferram(mtd, to, !ret && !subpage);
if (ret) {
printk(KERN_ERR "%s: write failed %d\n",
__func__, ret);
break;
}
/* Only check verify write turn on */
ret = onenand_verify(mtd, buf, to, thislen);
if (ret) {
printk(KERN_ERR "%s: verify failed %d\n",
__func__, ret);
break;
}
written += thislen;
if (written == len)
break;
} else
written += thislen;
column = 0;
prev_subpage = subpage;
prev = to;
prevlen = thislen;
to += thislen;
buf += thislen;
first = 0;
}
/* In error case, clear all bufferrams */
if (written != len)
onenand_invalidate_bufferram(mtd, 0, -1);
ops->retlen = written;
ops->oobretlen = oobwritten;
return ret;
}
/**
* onenand_write_oob_nolock - [INTERN] OneNAND write out-of-band
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
* @param retlen pointer to variable to store the number of written bytes
* @param buf the data to write
* @param mode operation mode
*
* OneNAND write out-of-band
*/
static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
{
struct onenand_chip *this = mtd->priv;
int column, ret = 0, oobsize;
int written = 0, oobcmd;
u_char *oobbuf;
size_t len = ops->ooblen;
const u_char *buf = ops->oobbuf;
unsigned int mode = ops->mode;
to += ops->ooboffs;
pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to,
(int)len);
/* Initialize retlen, in case of early exit */
ops->oobretlen = 0;
if (mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
column = to & (mtd->oobsize - 1);
if (unlikely(column >= oobsize)) {
printk(KERN_ERR "%s: Attempted to start write outside oob\n",
__func__);
return -EINVAL;
}
/* For compatibility with NAND: Do not allow write past end of page */
if (unlikely(column + len > oobsize)) {
printk(KERN_ERR "%s: Attempt to write past end of page\n",
__func__);
return -EINVAL;
}
/* Do not allow reads past end of device */
if (unlikely(to >= mtd->size ||
column + len > ((mtd->size >> this->page_shift) -
(to >> this->page_shift)) * oobsize)) {
printk(KERN_ERR "%s: Attempted to write past end of device\n",
__func__);
return -EINVAL;
}
oobbuf = this->oob_buf;
oobcmd = ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_PROG : ONENAND_CMD_PROGOOB;
/* Loop until all data write */
while (written < len) {
int thislen = min_t(int, oobsize, len - written);
cond_resched();
this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize);
/* We send data to spare ram with oobsize
* to prevent byte access */
memset(oobbuf, 0xff, mtd->oobsize);
if (mode == MTD_OPS_AUTO_OOB)
onenand_fill_auto_oob(mtd, oobbuf, buf, column, thislen);
else
memcpy(oobbuf + column, buf, thislen);
this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
if (ONENAND_IS_4KB_PAGE(this)) {
/* Set main area of DataRAM to 0xff*/
memset(this->page_buf, 0xff, mtd->writesize);
this->write_bufferram(mtd, ONENAND_DATARAM,
this->page_buf, 0, mtd->writesize);
}
this->command(mtd, oobcmd, to, mtd->oobsize);
onenand_update_bufferram(mtd, to, 0);
if (ONENAND_IS_2PLANE(this)) {
ONENAND_SET_BUFFERRAM1(this);
onenand_update_bufferram(mtd, to + this->writesize, 0);
}
ret = this->wait(mtd, FL_WRITING);
if (ret) {
printk(KERN_ERR "%s: write failed %d\n", __func__, ret);
break;
}
ret = onenand_verify_oob(mtd, oobbuf, to);
if (ret) {
printk(KERN_ERR "%s: verify failed %d\n",
__func__, ret);
break;
}
written += thislen;
if (written == len)
break;
to += mtd->writesize;
buf += thislen;
column = 0;
}
ops->oobretlen = written;
return ret;
}
/**
* onenand_write - [MTD Interface] write buffer to FLASH
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
* @param retlen pointer to variable to store the number of written bytes
* @param buf the data to write
*
* Write with ECC
*/
static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
struct mtd_oob_ops ops = {
.len = len,
.ooblen = 0,
.datbuf = (u_char *) buf,
.oobbuf = NULL,
};
int ret;
onenand_get_device(mtd, FL_WRITING);
ret = onenand_write_ops_nolock(mtd, to, &ops);
onenand_release_device(mtd);
*retlen = ops.retlen;
return ret;
}
/**
* onenand_write_oob - [MTD Interface] NAND write data and/or out-of-band
* @param mtd: MTD device structure
* @param to: offset to write
* @param ops: oob operation description structure
*/
static int onenand_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
{
int ret;
switch (ops->mode) {
case MTD_OPS_PLACE_OOB:
case MTD_OPS_AUTO_OOB:
break;
case MTD_OPS_RAW:
/* Not implemented yet */
default:
return -EINVAL;
}
onenand_get_device(mtd, FL_WRITING);
if (ops->datbuf)
ret = onenand_write_ops_nolock(mtd, to, ops);
else
ret = onenand_write_oob_nolock(mtd, to, ops);
onenand_release_device(mtd);
return ret;
}
/**
* onenand_block_isbad_nolock - [GENERIC] Check if a block is marked bad
* @param mtd MTD device structure
* @param ofs offset from device start
* @param allowbbt 1, if its allowed to access the bbt area
*
* Check, if the block is bad. Either by reading the bad block table or
* calling of the scan function.
*/
static int onenand_block_isbad_nolock(struct mtd_info *mtd, loff_t ofs, int allowbbt)
{
struct onenand_chip *this = mtd->priv;
struct bbm_info *bbm = this->bbm;
/* Return info from the table */
return bbm->isbad_bbt(mtd, ofs, allowbbt);
}
static int onenand_multiblock_erase_verify(struct mtd_info *mtd,
struct erase_info *instr)
{
struct onenand_chip *this = mtd->priv;
loff_t addr = instr->addr;
int len = instr->len;
unsigned int block_size = (1 << this->erase_shift);
int ret = 0;
while (len) {
this->command(mtd, ONENAND_CMD_ERASE_VERIFY, addr, block_size);
ret = this->wait(mtd, FL_VERIFYING_ERASE);
if (ret) {
printk(KERN_ERR "%s: Failed verify, block %d\n",
__func__, onenand_block(this, addr));
instr->state = MTD_ERASE_FAILED;
instr->fail_addr = addr;
return -1;
}
len -= block_size;
addr += block_size;
}
return 0;
}
/**
* onenand_multiblock_erase - [INTERN] erase block(s) using multiblock erase
* @param mtd MTD device structure
* @param instr erase instruction
* @param region erase region
*
* Erase one or more blocks up to 64 block at a time
*/
static int onenand_multiblock_erase(struct mtd_info *mtd,
struct erase_info *instr,
unsigned int block_size)
{
struct onenand_chip *this = mtd->priv;
loff_t addr = instr->addr;
int len = instr->len;
int eb_count = 0;
int ret = 0;
int bdry_block = 0;
instr->state = MTD_ERASING;
if (ONENAND_IS_DDP(this)) {
loff_t bdry_addr = this->chipsize >> 1;
if (addr < bdry_addr && (addr + len) > bdry_addr)
bdry_block = bdry_addr >> this->erase_shift;
}
/* Pre-check bbs */
while (len) {
/* Check if we have a bad block, we do not erase bad blocks */
if (onenand_block_isbad_nolock(mtd, addr, 0)) {
printk(KERN_WARNING "%s: attempt to erase a bad block "
"at addr 0x%012llx\n",
__func__, (unsigned long long) addr);
instr->state = MTD_ERASE_FAILED;
return -EIO;
}
len -= block_size;
addr += block_size;
}
len = instr->len;
addr = instr->addr;
/* loop over 64 eb batches */
while (len) {
struct erase_info verify_instr = *instr;
int max_eb_count = MB_ERASE_MAX_BLK_COUNT;
verify_instr.addr = addr;
verify_instr.len = 0;
/* do not cross chip boundary */
if (bdry_block) {
int this_block = (addr >> this->erase_shift);
if (this_block < bdry_block) {
max_eb_count = min(max_eb_count,
(bdry_block - this_block));
}
}
eb_count = 0;
while (len > block_size && eb_count < (max_eb_count - 1)) {
this->command(mtd, ONENAND_CMD_MULTIBLOCK_ERASE,
addr, block_size);
onenand_invalidate_bufferram(mtd, addr, block_size);
ret = this->wait(mtd, FL_PREPARING_ERASE);
if (ret) {
printk(KERN_ERR "%s: Failed multiblock erase, "
"block %d\n", __func__,
onenand_block(this, addr));
instr->state = MTD_ERASE_FAILED;
instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
return -EIO;
}
len -= block_size;
addr += block_size;
eb_count++;
}
/* last block of 64-eb series */
cond_resched();
this->command(mtd, ONENAND_CMD_ERASE, addr, block_size);
onenand_invalidate_bufferram(mtd, addr, block_size);
ret = this->wait(mtd, FL_ERASING);
/* Check if it is write protected */
if (ret) {
printk(KERN_ERR "%s: Failed erase, block %d\n",
__func__, onenand_block(this, addr));
instr->state = MTD_ERASE_FAILED;
instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
return -EIO;
}
len -= block_size;
addr += block_size;
eb_count++;
/* verify */
verify_instr.len = eb_count * block_size;
if (onenand_multiblock_erase_verify(mtd, &verify_instr)) {
instr->state = verify_instr.state;
instr->fail_addr = verify_instr.fail_addr;
return -EIO;
}
}
return 0;
}
/**
* onenand_block_by_block_erase - [INTERN] erase block(s) using regular erase
* @param mtd MTD device structure
* @param instr erase instruction
* @param region erase region
* @param block_size erase block size
*
* Erase one or more blocks one block at a time
*/
static int onenand_block_by_block_erase(struct mtd_info *mtd,
struct erase_info *instr,
struct mtd_erase_region_info *region,
unsigned int block_size)
{
struct onenand_chip *this = mtd->priv;
loff_t addr = instr->addr;
int len = instr->len;
loff_t region_end = 0;
int ret = 0;
if (region) {
/* region is set for Flex-OneNAND */
region_end = region->offset + region->erasesize * region->numblocks;
}
instr->state = MTD_ERASING;
/* Loop through the blocks */
while (len) {
cond_resched();
/* Check if we have a bad block, we do not erase bad blocks */
if (onenand_block_isbad_nolock(mtd, addr, 0)) {
printk(KERN_WARNING "%s: attempt to erase a bad block "
"at addr 0x%012llx\n",
__func__, (unsigned long long) addr);
instr->state = MTD_ERASE_FAILED;
return -EIO;
}
this->command(mtd, ONENAND_CMD_ERASE, addr, block_size);
onenand_invalidate_bufferram(mtd, addr, block_size);
ret = this->wait(mtd, FL_ERASING);
/* Check, if it is write protected */
if (ret) {
printk(KERN_ERR "%s: Failed erase, block %d\n",
__func__, onenand_block(this, addr));
instr->state = MTD_ERASE_FAILED;
instr->fail_addr = addr;
return -EIO;
}
len -= block_size;
addr += block_size;
if (region && addr == region_end) {
if (!len)
break;
region++;
block_size = region->erasesize;
region_end = region->offset + region->erasesize * region->numblocks;
if (len & (block_size - 1)) {
/* FIXME: This should be handled at MTD partitioning level. */
printk(KERN_ERR "%s: Unaligned address\n",
__func__);
return -EIO;
}
}
}
return 0;
}
/**
* onenand_erase - [MTD Interface] erase block(s)
* @param mtd MTD device structure
* @param instr erase instruction
*
* Erase one or more blocks
*/
static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
{
struct onenand_chip *this = mtd->priv;
unsigned int block_size;
loff_t addr = instr->addr;
loff_t len = instr->len;
int ret = 0;
struct mtd_erase_region_info *region = NULL;
loff_t region_offset = 0;
pr_debug("%s: start=0x%012llx, len=%llu\n", __func__,
(unsigned long long)instr->addr,
(unsigned long long)instr->len);
if (FLEXONENAND(this)) {
/* Find the eraseregion of this address */
int i = flexonenand_region(mtd, addr);
region = &mtd->eraseregions[i];
block_size = region->erasesize;
/* Start address within region must align on block boundary.
* Erase region's start offset is always block start address.
*/
region_offset = region->offset;
} else
block_size = 1 << this->erase_shift;
/* Start address must align on block boundary */
if (unlikely((addr - region_offset) & (block_size - 1))) {
printk(KERN_ERR "%s: Unaligned address\n", __func__);
return -EINVAL;
}
/* Length must align on block boundary */
if (unlikely(len & (block_size - 1))) {
printk(KERN_ERR "%s: Length not block aligned\n", __func__);
return -EINVAL;
}
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_ERASING);
if (ONENAND_IS_4KB_PAGE(this) || region ||
instr->len < MB_ERASE_MIN_BLK_COUNT * block_size) {
/* region is set for Flex-OneNAND (no mb erase) */
ret = onenand_block_by_block_erase(mtd, instr,
region, block_size);
} else {
ret = onenand_multiblock_erase(mtd, instr, block_size);
}
/* Deselect and wake up anyone waiting on the device */
onenand_release_device(mtd);
/* Do call back function */
if (!ret) {
instr->state = MTD_ERASE_DONE;
mtd_erase_callback(instr);
}
return ret;
}
/**
* onenand_sync - [MTD Interface] sync
* @param mtd MTD device structure
*
* Sync is actually a wait for chip ready function
*/
static void onenand_sync(struct mtd_info *mtd)
{
pr_debug("%s: called\n", __func__);
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_SYNCING);
/* Release it and go back */
onenand_release_device(mtd);
}
/**
* onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
* @param mtd MTD device structure
* @param ofs offset relative to mtd start
*
* Check whether the block is bad
*/
static int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs)
{
int ret;
/* Check for invalid offset */
if (ofs > mtd->size)
return -EINVAL;
onenand_get_device(mtd, FL_READING);
ret = onenand_block_isbad_nolock(mtd, ofs, 0);
onenand_release_device(mtd);
return ret;
}
/**
* onenand_default_block_markbad - [DEFAULT] mark a block bad
* @param mtd MTD device structure
* @param ofs offset from device start
*
* This is the default implementation, which can be overridden by
* a hardware specific driver.
*/
static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
struct onenand_chip *this = mtd->priv;
struct bbm_info *bbm = this->bbm;
u_char buf[2] = {0, 0};
struct mtd_oob_ops ops = {
.mode = MTD_OPS_PLACE_OOB,
.ooblen = 2,
.oobbuf = buf,
.ooboffs = 0,
};
int block;
/* Get block number */
block = onenand_block(this, ofs);
if (bbm->bbt)
bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
/* We write two bytes, so we don't have to mess with 16-bit access */
ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
/* FIXME : What to do when marking SLC block in partition
* with MLC erasesize? For now, it is not advisable to
* create partitions containing both SLC and MLC regions.
*/
return onenand_write_oob_nolock(mtd, ofs, &ops);
}
/**
* onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
* @param mtd MTD device structure
* @param ofs offset relative to mtd start
*
* Mark the block as bad
*/
static int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
int ret;
ret = onenand_block_isbad(mtd, ofs);
if (ret) {
/* If it was bad already, return success and do nothing */
if (ret > 0)
return 0;
return ret;
}
onenand_get_device(mtd, FL_WRITING);
ret = mtd_block_markbad(mtd, ofs);
onenand_release_device(mtd);
return ret;
}
/**
* onenand_do_lock_cmd - [OneNAND Interface] Lock or unlock block(s)
* @param mtd MTD device structure
* @param ofs offset relative to mtd start
* @param len number of bytes to lock or unlock
* @param cmd lock or unlock command
*
* Lock or unlock one or more blocks
*/
static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int cmd)
{
struct onenand_chip *this = mtd->priv;
int start, end, block, value, status;
int wp_status_mask;
start = onenand_block(this, ofs);
end = onenand_block(this, ofs + len) - 1;
if (cmd == ONENAND_CMD_LOCK)
wp_status_mask = ONENAND_WP_LS;
else
wp_status_mask = ONENAND_WP_US;
/* Continuous lock scheme */
if (this->options & ONENAND_HAS_CONT_LOCK) {
/* Set start block address */
this->write_word(start, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
/* Set end block address */
this->write_word(end, this->base + ONENAND_REG_END_BLOCK_ADDRESS);
/* Write lock command */
this->command(mtd, cmd, 0, 0);
/* There's no return value */
this->wait(mtd, FL_LOCKING);
/* Sanity check */
while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
& ONENAND_CTRL_ONGO)
continue;
/* Check lock status */
status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
if (!(status & wp_status_mask))
printk(KERN_ERR "%s: wp status = 0x%x\n",
__func__, status);
return 0;
}
/* Block lock scheme */
for (block = start; block < end + 1; block++) {
/* Set block address */
value = onenand_block_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
/* Select DataRAM for DDP */
value = onenand_bufferram_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
/* Set start block address */
this->write_word(block, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
/* Write lock command */
this->command(mtd, cmd, 0, 0);
/* There's no return value */
this->wait(mtd, FL_LOCKING);
/* Sanity check */
while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
& ONENAND_CTRL_ONGO)
continue;
/* Check lock status */
status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
if (!(status & wp_status_mask))
printk(KERN_ERR "%s: block = %d, wp status = 0x%x\n",
__func__, block, status);
}
return 0;
}
/**
* onenand_lock - [MTD Interface] Lock block(s)
* @param mtd MTD device structure
* @param ofs offset relative to mtd start
* @param len number of bytes to unlock
*
* Lock one or more blocks
*/
static int onenand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
int ret;
onenand_get_device(mtd, FL_LOCKING);
ret = onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_LOCK);
onenand_release_device(mtd);
return ret;
}
/**
* onenand_unlock - [MTD Interface] Unlock block(s)
* @param mtd MTD device structure
* @param ofs offset relative to mtd start
* @param len number of bytes to unlock
*
* Unlock one or more blocks
*/
static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
int ret;
onenand_get_device(mtd, FL_LOCKING);
ret = onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
onenand_release_device(mtd);
return ret;
}
/**
* onenand_check_lock_status - [OneNAND Interface] Check lock status
* @param this onenand chip data structure
*
* Check lock status
*/
static int onenand_check_lock_status(struct onenand_chip *this)
{
unsigned int value, block, status;
unsigned int end;
end = this->chipsize >> this->erase_shift;
for (block = 0; block < end; block++) {
/* Set block address */
value = onenand_block_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
/* Select DataRAM for DDP */
value = onenand_bufferram_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
/* Set start block address */
this->write_word(block, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
/* Check lock status */
status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
if (!(status & ONENAND_WP_US)) {
printk(KERN_ERR "%s: block = %d, wp status = 0x%x\n",
__func__, block, status);
return 0;
}
}
return 1;
}
/**
* onenand_unlock_all - [OneNAND Interface] unlock all blocks
* @param mtd MTD device structure
*
* Unlock all blocks
*/
static void onenand_unlock_all(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
loff_t ofs = 0;
loff_t len = mtd->size;
if (this->options & ONENAND_HAS_UNLOCK_ALL) {
/* Set start block address */
this->write_word(0, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
/* Write unlock command */
this->command(mtd, ONENAND_CMD_UNLOCK_ALL, 0, 0);
/* There's no return value */
this->wait(mtd, FL_LOCKING);
/* Sanity check */
while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
& ONENAND_CTRL_ONGO)
continue;
/* Don't check lock status */
if (this->options & ONENAND_SKIP_UNLOCK_CHECK)
return;
/* Check lock status */
if (onenand_check_lock_status(this))
return;
/* Workaround for all block unlock in DDP */
if (ONENAND_IS_DDP(this) && !FLEXONENAND(this)) {
/* All blocks on another chip */
ofs = this->chipsize >> 1;
len = this->chipsize >> 1;
}
}
onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
}
#ifdef CONFIG_MTD_ONENAND_OTP
/**
* onenand_otp_command - Send OTP specific command to OneNAND device
* @param mtd MTD device structure
* @param cmd the command to be sent
* @param addr offset to read from or write to
* @param len number of bytes to read or write
*/
static int onenand_otp_command(struct mtd_info *mtd, int cmd, loff_t addr,
size_t len)
{
struct onenand_chip *this = mtd->priv;
int value, block, page;
/* Address translation */
switch (cmd) {
case ONENAND_CMD_OTP_ACCESS:
block = (int) (addr >> this->erase_shift);
page = -1;
break;
default:
block = (int) (addr >> this->erase_shift);
page = (int) (addr >> this->page_shift);
if (ONENAND_IS_2PLANE(this)) {
/* Make the even block number */
block &= ~1;
/* Is it the odd plane? */
if (addr & this->writesize)
block++;
page >>= 1;
}
page &= this->page_mask;
break;
}
if (block != -1) {
/* Write 'DFS, FBA' of Flash */
value = onenand_block_address(this, block);
this->write_word(value, this->base +
ONENAND_REG_START_ADDRESS1);
}
if (page != -1) {
/* Now we use page size operation */
int sectors = 4, count = 4;
int dataram;
switch (cmd) {
default:
if (ONENAND_IS_2PLANE(this) && cmd == ONENAND_CMD_PROG)
cmd = ONENAND_CMD_2X_PROG;
dataram = ONENAND_CURRENT_BUFFERRAM(this);
break;
}
/* Write 'FPA, FSA' of Flash */
value = onenand_page_address(page, sectors);
this->write_word(value, this->base +
ONENAND_REG_START_ADDRESS8);
/* Write 'BSA, BSC' of DataRAM */
value = onenand_buffer_address(dataram, sectors, count);
this->write_word(value, this->base + ONENAND_REG_START_BUFFER);
}
/* Interrupt clear */
this->write_word(ONENAND_INT_CLEAR, this->base + ONENAND_REG_INTERRUPT);
/* Write command */
this->write_word(cmd, this->base + ONENAND_REG_COMMAND);
return 0;
}
/**
* onenand_otp_write_oob_nolock - [INTERN] OneNAND write out-of-band, specific to OTP
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
* @param retlen pointer to variable to store the number of written bytes
* @param buf the data to write
*
* OneNAND write out-of-band only for OTP
*/
static int onenand_otp_write_oob_nolock(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
{
struct onenand_chip *this = mtd->priv;
int column, ret = 0, oobsize;
int written = 0;
u_char *oobbuf;
size_t len = ops->ooblen;
const u_char *buf = ops->oobbuf;
int block, value, status;
to += ops->ooboffs;
/* Initialize retlen, in case of early exit */
ops->oobretlen = 0;
oobsize = mtd->oobsize;
column = to & (mtd->oobsize - 1);
oobbuf = this->oob_buf;
/* Loop until all data write */
while (written < len) {
int thislen = min_t(int, oobsize, len - written);
cond_resched();
block = (int) (to >> this->erase_shift);
/*
* Write 'DFS, FBA' of Flash
* Add: F100h DQ=DFS, FBA
*/
value = onenand_block_address(this, block);
this->write_word(value, this->base +
ONENAND_REG_START_ADDRESS1);
/*
* Select DataRAM for DDP
* Add: F101h DQ=DBS
*/
value = onenand_bufferram_address(this, block);
this->write_word(value, this->base +
ONENAND_REG_START_ADDRESS2);
ONENAND_SET_NEXT_BUFFERRAM(this);
/*
* Enter OTP access mode
*/
this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
this->wait(mtd, FL_OTPING);
/* We send data to spare ram with oobsize
* to prevent byte access */
memcpy(oobbuf + column, buf, thislen);
/*
* Write Data into DataRAM
* Add: 8th Word
* in sector0/spare/page0
* DQ=XXFCh
*/
this->write_bufferram(mtd, ONENAND_SPARERAM,
oobbuf, 0, mtd->oobsize);
onenand_otp_command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
onenand_update_bufferram(mtd, to, 0);
if (ONENAND_IS_2PLANE(this)) {
ONENAND_SET_BUFFERRAM1(this);
onenand_update_bufferram(mtd, to + this->writesize, 0);
}
ret = this->wait(mtd, FL_WRITING);
if (ret) {
printk(KERN_ERR "%s: write failed %d\n", __func__, ret);
break;
}
/* Exit OTP access mode */
this->command(mtd, ONENAND_CMD_RESET, 0, 0);
this->wait(mtd, FL_RESETING);
status = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
status &= 0x60;
if (status == 0x60) {
printk(KERN_DEBUG "\nBLOCK\tSTATUS\n");
printk(KERN_DEBUG "1st Block\tLOCKED\n");
printk(KERN_DEBUG "OTP Block\tLOCKED\n");
} else if (status == 0x20) {
printk(KERN_DEBUG "\nBLOCK\tSTATUS\n");
printk(KERN_DEBUG "1st Block\tLOCKED\n");
printk(KERN_DEBUG "OTP Block\tUN-LOCKED\n");
} else if (status == 0x40) {
printk(KERN_DEBUG "\nBLOCK\tSTATUS\n");
printk(KERN_DEBUG "1st Block\tUN-LOCKED\n");
printk(KERN_DEBUG "OTP Block\tLOCKED\n");
} else {
printk(KERN_DEBUG "Reboot to check\n");
}
written += thislen;
if (written == len)
break;
to += mtd->writesize;
buf += thislen;
column = 0;
}
ops->oobretlen = written;
return ret;
}
/* Internal OTP operation */
typedef int (*otp_op_t)(struct mtd_info *mtd, loff_t form, size_t len,
size_t *retlen, u_char *buf);
/**
* do_otp_read - [DEFAULT] Read OTP block area
* @param mtd MTD device structure
* @param from The offset to read
* @param len number of bytes to read
* @param retlen pointer to variable to store the number of readbytes
* @param buf the databuffer to put/get data
*
* Read OTP block area.
*/
static int do_otp_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
struct onenand_chip *this = mtd->priv;
struct mtd_oob_ops ops = {
.len = len,
.ooblen = 0,
.datbuf = buf,
.oobbuf = NULL,
};
int ret;
/* Enter OTP access mode */
this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
this->wait(mtd, FL_OTPING);
ret = ONENAND_IS_4KB_PAGE(this) ?
onenand_mlc_read_ops_nolock(mtd, from, &ops) :
onenand_read_ops_nolock(mtd, from, &ops);
/* Exit OTP access mode */
this->command(mtd, ONENAND_CMD_RESET, 0, 0);
this->wait(mtd, FL_RESETING);
return ret;
}
/**
* do_otp_write - [DEFAULT] Write OTP block area
* @param mtd MTD device structure
* @param to The offset to write
* @param len number of bytes to write
* @param retlen pointer to variable to store the number of write bytes
* @param buf the databuffer to put/get data
*
* Write OTP block area.
*/
static int do_otp_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, u_char *buf)
{
struct onenand_chip *this = mtd->priv;
unsigned char *pbuf = buf;
int ret;
struct mtd_oob_ops ops;
/* Force buffer page aligned */
if (len < mtd->writesize) {
memcpy(this->page_buf, buf, len);
memset(this->page_buf + len, 0xff, mtd->writesize - len);
pbuf = this->page_buf;
len = mtd->writesize;
}
/* Enter OTP access mode */
this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
this->wait(mtd, FL_OTPING);
ops.len = len;
ops.ooblen = 0;
ops.datbuf = pbuf;
ops.oobbuf = NULL;
ret = onenand_write_ops_nolock(mtd, to, &ops);
*retlen = ops.retlen;
/* Exit OTP access mode */
this->command(mtd, ONENAND_CMD_RESET, 0, 0);
this->wait(mtd, FL_RESETING);
return ret;
}
/**
* do_otp_lock - [DEFAULT] Lock OTP block area
* @param mtd MTD device structure
* @param from The offset to lock
* @param len number of bytes to lock
* @param retlen pointer to variable to store the number of lock bytes
* @param buf the databuffer to put/get data
*
* Lock OTP block area.
*/
static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
struct onenand_chip *this = mtd->priv;
struct mtd_oob_ops ops;
int ret;
if (FLEXONENAND(this)) {
/* Enter OTP access mode */
this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
this->wait(mtd, FL_OTPING);
/*
* For Flex-OneNAND, we write lock mark to 1st word of sector 4 of
* main area of page 49.
*/
ops.len = mtd->writesize;
ops.ooblen = 0;
ops.datbuf = buf;
ops.oobbuf = NULL;
ret = onenand_write_ops_nolock(mtd, mtd->writesize * 49, &ops);
*retlen = ops.retlen;
/* Exit OTP access mode */
this->command(mtd, ONENAND_CMD_RESET, 0, 0);
this->wait(mtd, FL_RESETING);
} else {
ops.mode = MTD_OPS_PLACE_OOB;
ops.ooblen = len;
ops.oobbuf = buf;
ops.ooboffs = 0;
ret = onenand_otp_write_oob_nolock(mtd, from, &ops);
*retlen = ops.oobretlen;
}
return ret;
}
/**
* onenand_otp_walk - [DEFAULT] Handle OTP operation
* @param mtd MTD device structure
* @param from The offset to read/write
* @param len number of bytes to read/write
* @param retlen pointer to variable to store the number of read bytes
* @param buf the databuffer to put/get data
* @param action do given action
* @param mode specify user and factory
*
* Handle OTP operation.
*/
static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf,
otp_op_t action, int mode)
{
struct onenand_chip *this = mtd->priv;
int otp_pages;
int density;
int ret = 0;
*retlen = 0;
density = onenand_get_density(this->device_id);
if (density < ONENAND_DEVICE_DENSITY_512Mb)
otp_pages = 20;
else
otp_pages = 50;
if (mode == MTD_OTP_FACTORY) {
from += mtd->writesize * otp_pages;
otp_pages = ONENAND_PAGES_PER_BLOCK - otp_pages;
}
/* Check User/Factory boundary */
if (mode == MTD_OTP_USER) {
if (mtd->writesize * otp_pages < from + len)
return 0;
} else {
if (mtd->writesize * otp_pages < len)
return 0;
}
onenand_get_device(mtd, FL_OTPING);
while (len > 0 && otp_pages > 0) {
if (!action) { /* OTP Info functions */
struct otp_info *otpinfo;
len -= sizeof(struct otp_info);
if (len <= 0) {
ret = -ENOSPC;
break;
}
otpinfo = (struct otp_info *) buf;
otpinfo->start = from;
otpinfo->length = mtd->writesize;
otpinfo->locked = 0;
from += mtd->writesize;
buf += sizeof(struct otp_info);
*retlen += sizeof(struct otp_info);
} else {
size_t tmp_retlen;
ret = action(mtd, from, len, &tmp_retlen, buf);
buf += tmp_retlen;
len -= tmp_retlen;
*retlen += tmp_retlen;
if (ret)
break;
}
otp_pages--;
}
onenand_release_device(mtd);
return ret;
}
/**
* onenand_get_fact_prot_info - [MTD Interface] Read factory OTP info
* @param mtd MTD device structure
* @param buf the databuffer to put/get data
* @param len number of bytes to read
*
* Read factory OTP info.
*/
static int onenand_get_fact_prot_info(struct mtd_info *mtd,
struct otp_info *buf, size_t len)
{
size_t retlen;
int ret;
ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_FACTORY);
return ret ? : retlen;
}
/**
* onenand_read_fact_prot_reg - [MTD Interface] Read factory OTP area
* @param mtd MTD device structure
* @param from The offset to read
* @param len number of bytes to read
* @param retlen pointer to variable to store the number of read bytes
* @param buf the databuffer to put/get data
*
* Read factory OTP area.
*/
static int onenand_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
size_t len, size_t *retlen, u_char *buf)
{
return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_read, MTD_OTP_FACTORY);
}
/**
* onenand_get_user_prot_info - [MTD Interface] Read user OTP info
* @param mtd MTD device structure
* @param buf the databuffer to put/get data
* @param len number of bytes to read
*
* Read user OTP info.
*/
static int onenand_get_user_prot_info(struct mtd_info *mtd,
struct otp_info *buf, size_t len)
{
size_t retlen;
int ret;
ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_USER);
return ret ? : retlen;
}
/**
* onenand_read_user_prot_reg - [MTD Interface] Read user OTP area
* @param mtd MTD device structure
* @param from The offset to read
* @param len number of bytes to read
* @param retlen pointer to variable to store the number of read bytes
* @param buf the databuffer to put/get data
*
* Read user OTP area.
*/
static int onenand_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
size_t len, size_t *retlen, u_char *buf)
{
return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_read, MTD_OTP_USER);
}
/**
* onenand_write_user_prot_reg - [MTD Interface] Write user OTP area
* @param mtd MTD device structure
* @param from The offset to write
* @param len number of bytes to write
* @param retlen pointer to variable to store the number of write bytes
* @param buf the databuffer to put/get data
*
* Write user OTP area.
*/
static int onenand_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
size_t len, size_t *retlen, u_char *buf)
{
return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_write, MTD_OTP_USER);
}
/**
* onenand_lock_user_prot_reg - [MTD Interface] Lock user OTP area
* @param mtd MTD device structure
* @param from The offset to lock
* @param len number of bytes to unlock
*
* Write lock mark on spare area in page 0 in OTP block
*/
static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
size_t len)
{
struct onenand_chip *this = mtd->priv;
u_char *buf = FLEXONENAND(this) ? this->page_buf : this->oob_buf;
size_t retlen;
int ret;
unsigned int otp_lock_offset = ONENAND_OTP_LOCK_OFFSET;
memset(buf, 0xff, FLEXONENAND(this) ? this->writesize
: mtd->oobsize);
/*
* Write lock mark to 8th word of sector0 of page0 of the spare0.
* We write 16 bytes spare area instead of 2 bytes.
* For Flex-OneNAND, we write lock mark to 1st word of sector 4 of
* main area of page 49.
*/
from = 0;
len = FLEXONENAND(this) ? mtd->writesize : 16;
/*
* Note: OTP lock operation
* OTP block : 0xXXFC XX 1111 1100
* 1st block : 0xXXF3 (If chip support) XX 1111 0011
* Both : 0xXXF0 (If chip support) XX 1111 0000
*/
if (FLEXONENAND(this))
otp_lock_offset = FLEXONENAND_OTP_LOCK_OFFSET;
/* ONENAND_OTP_AREA | ONENAND_OTP_BLOCK0 | ONENAND_OTP_AREA_BLOCK0 */
if (otp == 1)
buf[otp_lock_offset] = 0xFC;
else if (otp == 2)
buf[otp_lock_offset] = 0xF3;
else if (otp == 3)
buf[otp_lock_offset] = 0xF0;
else if (otp != 0)
printk(KERN_DEBUG "[OneNAND] Invalid option selected for OTP\n");
ret = onenand_otp_walk(mtd, from, len, &retlen, buf, do_otp_lock, MTD_OTP_USER);
return ret ? : retlen;
}
#endif /* CONFIG_MTD_ONENAND_OTP */
/**
* onenand_check_features - Check and set OneNAND features
* @param mtd MTD data structure
*
* Check and set OneNAND features
* - lock scheme
* - two plane
*/
static void onenand_check_features(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
unsigned int density, process, numbufs;
/* Lock scheme depends on density and process */
density = onenand_get_density(this->device_id);
process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT;
numbufs = this->read_word(this->base + ONENAND_REG_NUM_BUFFERS) >> 8;
/* Lock scheme */
switch (density) {
case ONENAND_DEVICE_DENSITY_4Gb:
if (ONENAND_IS_DDP(this))
this->options |= ONENAND_HAS_2PLANE;
else if (numbufs == 1) {
this->options |= ONENAND_HAS_4KB_PAGE;
this->options |= ONENAND_HAS_CACHE_PROGRAM;
/*
* There are two different 4KiB pagesize chips
* and no way to detect it by H/W config values.
*
* To detect the correct NOP for each chips,
* It should check the version ID as workaround.
*
* Now it has as following
* KFM4G16Q4M has NOP 4 with version ID 0x0131
* KFM4G16Q5M has NOP 1 with versoin ID 0x013e
*/
if ((this->version_id & 0xf) == 0xe)
this->options |= ONENAND_HAS_NOP_1;
}
case ONENAND_DEVICE_DENSITY_2Gb:
/* 2Gb DDP does not have 2 plane */
if (!ONENAND_IS_DDP(this))
this->options |= ONENAND_HAS_2PLANE;
this->options |= ONENAND_HAS_UNLOCK_ALL;
case ONENAND_DEVICE_DENSITY_1Gb:
/* A-Die has all block unlock */
if (process)
this->options |= ONENAND_HAS_UNLOCK_ALL;
break;
default:
/* Some OneNAND has continuous lock scheme */
if (!process)
this->options |= ONENAND_HAS_CONT_LOCK;
break;
}
/* The MLC has 4KiB pagesize. */
if (ONENAND_IS_MLC(this))
this->options |= ONENAND_HAS_4KB_PAGE;
if (ONENAND_IS_4KB_PAGE(this))
this->options &= ~ONENAND_HAS_2PLANE;
if (FLEXONENAND(this)) {
this->options &= ~ONENAND_HAS_CONT_LOCK;
this->options |= ONENAND_HAS_UNLOCK_ALL;
}
if (this->options & ONENAND_HAS_CONT_LOCK)
printk(KERN_DEBUG "Lock scheme is Continuous Lock\n");
if (this->options & ONENAND_HAS_UNLOCK_ALL)
printk(KERN_DEBUG "Chip support all block unlock\n");
if (this->options & ONENAND_HAS_2PLANE)
printk(KERN_DEBUG "Chip has 2 plane\n");
if (this->options & ONENAND_HAS_4KB_PAGE)
printk(KERN_DEBUG "Chip has 4KiB pagesize\n");
if (this->options & ONENAND_HAS_CACHE_PROGRAM)
printk(KERN_DEBUG "Chip has cache program feature\n");
}
/**
* onenand_print_device_info - Print device & version ID
* @param device device ID
* @param version version ID
*
* Print device & version ID
*/
static void onenand_print_device_info(int device, int version)
{
int vcc, demuxed, ddp, density, flexonenand;
vcc = device & ONENAND_DEVICE_VCC_MASK;
demuxed = device & ONENAND_DEVICE_IS_DEMUX;
ddp = device & ONENAND_DEVICE_IS_DDP;
density = onenand_get_density(device);
flexonenand = device & DEVICE_IS_FLEXONENAND;
printk(KERN_INFO "%s%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n",
demuxed ? "" : "Muxed ",
flexonenand ? "Flex-" : "",
ddp ? "(DDP)" : "",
(16 << density),
vcc ? "2.65/3.3" : "1.8",
device);
printk(KERN_INFO "OneNAND version = 0x%04x\n", version);
}
static const struct onenand_manufacturers onenand_manuf_ids[] = {
{ONENAND_MFR_SAMSUNG, "Samsung"},
{ONENAND_MFR_NUMONYX, "Numonyx"},
};
/**
* onenand_check_maf - Check manufacturer ID
* @param manuf manufacturer ID
*
* Check manufacturer ID
*/
static int onenand_check_maf(int manuf)
{
int size = ARRAY_SIZE(onenand_manuf_ids);
char *name;
int i;
for (i = 0; i < size; i++)
if (manuf == onenand_manuf_ids[i].id)
break;
if (i < size)
name = onenand_manuf_ids[i].name;
else
name = "Unknown";
printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n", name, manuf);
return (i == size);
}
/**
* flexonenand_get_boundary - Reads the SLC boundary
* @param onenand_info - onenand info structure
**/
static int flexonenand_get_boundary(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
unsigned die, bdry;
int ret, syscfg, locked;
/* Disable ECC */
syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
this->write_word((syscfg | 0x0100), this->base + ONENAND_REG_SYS_CFG1);
for (die = 0; die < this->dies; die++) {
this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0);
this->wait(mtd, FL_SYNCING);
this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
ret = this->wait(mtd, FL_READING);
bdry = this->read_word(this->base + ONENAND_DATARAM);
if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3)
locked = 0;
else
locked = 1;
this->boundary[die] = bdry & FLEXONENAND_PI_MASK;
this->command(mtd, ONENAND_CMD_RESET, 0, 0);
ret = this->wait(mtd, FL_RESETING);
printk(KERN_INFO "Die %d boundary: %d%s\n", die,
this->boundary[die], locked ? "(Locked)" : "(Unlocked)");
}
/* Enable ECC */
this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
return 0;
}
/**
* flexonenand_get_size - Fill up fields in onenand_chip and mtd_info
* boundary[], diesize[], mtd->size, mtd->erasesize
* @param mtd - MTD device structure
*/
static void flexonenand_get_size(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
int die, i, eraseshift, density;
int blksperdie, maxbdry;
loff_t ofs;
density = onenand_get_density(this->device_id);
blksperdie = ((loff_t)(16 << density) << 20) >> (this->erase_shift);
blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
maxbdry = blksperdie - 1;
eraseshift = this->erase_shift - 1;
mtd->numeraseregions = this->dies << 1;
/* This fills up the device boundary */
flexonenand_get_boundary(mtd);
die = ofs = 0;
i = -1;
for (; die < this->dies; die++) {
if (!die || this->boundary[die-1] != maxbdry) {
i++;
mtd->eraseregions[i].offset = ofs;
mtd->eraseregions[i].erasesize = 1 << eraseshift;
mtd->eraseregions[i].numblocks =
this->boundary[die] + 1;
ofs += mtd->eraseregions[i].numblocks << eraseshift;
eraseshift++;
} else {
mtd->numeraseregions -= 1;
mtd->eraseregions[i].numblocks +=
this->boundary[die] + 1;
ofs += (this->boundary[die] + 1) << (eraseshift - 1);
}
if (this->boundary[die] != maxbdry) {
i++;
mtd->eraseregions[i].offset = ofs;
mtd->eraseregions[i].erasesize = 1 << eraseshift;
mtd->eraseregions[i].numblocks = maxbdry ^
this->boundary[die];
ofs += mtd->eraseregions[i].numblocks << eraseshift;
eraseshift--;
} else
mtd->numeraseregions -= 1;
}
/* Expose MLC erase size except when all blocks are SLC */
mtd->erasesize = 1 << this->erase_shift;
if (mtd->numeraseregions == 1)
mtd->erasesize >>= 1;
printk(KERN_INFO "Device has %d eraseregions\n", mtd->numeraseregions);
for (i = 0; i < mtd->numeraseregions; i++)
printk(KERN_INFO "[offset: 0x%08x, erasesize: 0x%05x,"
" numblocks: %04u]\n",
(unsigned int) mtd->eraseregions[i].offset,
mtd->eraseregions[i].erasesize,
mtd->eraseregions[i].numblocks);
for (die = 0, mtd->size = 0; die < this->dies; die++) {
this->diesize[die] = (loff_t)blksperdie << this->erase_shift;
this->diesize[die] -= (loff_t)(this->boundary[die] + 1)
<< (this->erase_shift - 1);
mtd->size += this->diesize[die];
}
}
/**
* flexonenand_check_blocks_erased - Check if blocks are erased
* @param mtd_info - mtd info structure
* @param start - first erase block to check
* @param end - last erase block to check
*
* Converting an unerased block from MLC to SLC
* causes byte values to change. Since both data and its ECC
* have changed, reads on the block give uncorrectable error.
* This might lead to the block being detected as bad.
*
* Avoid this by ensuring that the block to be converted is
* erased.
*/
static int flexonenand_check_blocks_erased(struct mtd_info *mtd, int start, int end)
{
struct onenand_chip *this = mtd->priv;
int i, ret;
int block;
struct mtd_oob_ops ops = {
.mode = MTD_OPS_PLACE_OOB,
.ooboffs = 0,
.ooblen = mtd->oobsize,
.datbuf = NULL,
.oobbuf = this->oob_buf,
};
loff_t addr;
printk(KERN_DEBUG "Check blocks from %d to %d\n", start, end);
for (block = start; block <= end; block++) {
addr = flexonenand_addr(this, block);
if (onenand_block_isbad_nolock(mtd, addr, 0))
continue;
/*
* Since main area write results in ECC write to spare,
* it is sufficient to check only ECC bytes for change.
*/
ret = onenand_read_oob_nolock(mtd, addr, &ops);
if (ret)
return ret;
for (i = 0; i < mtd->oobsize; i++)
if (this->oob_buf[i] != 0xff)
break;
if (i != mtd->oobsize) {
printk(KERN_WARNING "%s: Block %d not erased.\n",
__func__, block);
return 1;
}
}
return 0;
}
/**
* flexonenand_set_boundary - Writes the SLC boundary
* @param mtd - mtd info structure
*/
int flexonenand_set_boundary(struct mtd_info *mtd, int die,
int boundary, int lock)
{
struct onenand_chip *this = mtd->priv;
int ret, density, blksperdie, old, new, thisboundary;
loff_t addr;
/* Change only once for SDP Flex-OneNAND */
if (die && (!ONENAND_IS_DDP(this)))
return 0;
/* boundary value of -1 indicates no required change */
if (boundary < 0 || boundary == this->boundary[die])
return 0;
density = onenand_get_density(this->device_id);
blksperdie = ((16 << density) << 20) >> this->erase_shift;
blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
if (boundary >= blksperdie) {
printk(KERN_ERR "%s: Invalid boundary value. "
"Boundary not changed.\n", __func__);
return -EINVAL;
}
/* Check if converting blocks are erased */
old = this->boundary[die] + (die * this->density_mask);
new = boundary + (die * this->density_mask);
ret = flexonenand_check_blocks_erased(mtd, min(old, new) + 1, max(old, new));
if (ret) {
printk(KERN_ERR "%s: Please erase blocks "
"before boundary change\n", __func__);
return ret;
}
this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0);
this->wait(mtd, FL_SYNCING);
/* Check is boundary is locked */
this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
ret = this->wait(mtd, FL_READING);
thisboundary = this->read_word(this->base + ONENAND_DATARAM);
if ((thisboundary >> FLEXONENAND_PI_UNLOCK_SHIFT) != 3) {
printk(KERN_ERR "%s: boundary locked\n", __func__);
ret = 1;
goto out;
}
printk(KERN_INFO "Changing die %d boundary: %d%s\n",
die, boundary, lock ? "(Locked)" : "(Unlocked)");
addr = die ? this->diesize[0] : 0;
boundary &= FLEXONENAND_PI_MASK;
boundary |= lock ? 0 : (3 << FLEXONENAND_PI_UNLOCK_SHIFT);
this->command(mtd, ONENAND_CMD_ERASE, addr, 0);
ret = this->wait(mtd, FL_ERASING);
if (ret) {
printk(KERN_ERR "%s: Failed PI erase for Die %d\n",
__func__, die);
goto out;
}
this->write_word(boundary, this->base + ONENAND_DATARAM);
this->command(mtd, ONENAND_CMD_PROG, addr, 0);
ret = this->wait(mtd, FL_WRITING);
if (ret) {
printk(KERN_ERR "%s: Failed PI write for Die %d\n",
__func__, die);
goto out;
}
this->command(mtd, FLEXONENAND_CMD_PI_UPDATE, die, 0);
ret = this->wait(mtd, FL_WRITING);
out:
this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_REG_COMMAND);
this->wait(mtd, FL_RESETING);
if (!ret)
/* Recalculate device size on boundary change*/
flexonenand_get_size(mtd);
return ret;
}
/**
* onenand_chip_probe - [OneNAND Interface] The generic chip probe
* @param mtd MTD device structure
*
* OneNAND detection method:
* Compare the values from command with ones from register
*/
static int onenand_chip_probe(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
int bram_maf_id, bram_dev_id, maf_id, dev_id;
int syscfg;
/* Save system configuration 1 */
syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
/* Clear Sync. Burst Read mode to read BootRAM */
this->write_word((syscfg & ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE), this->base + ONENAND_REG_SYS_CFG1);
/* Send the command for reading device ID from BootRAM */
this->write_word(ONENAND_CMD_READID, this->base + ONENAND_BOOTRAM);
/* Read manufacturer and device IDs from BootRAM */
bram_maf_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x0);
bram_dev_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x2);
/* Reset OneNAND to read default register values */
this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_BOOTRAM);
/* Wait reset */
this->wait(mtd, FL_RESETING);
/* Restore system configuration 1 */
this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
/* Check manufacturer ID */
if (onenand_check_maf(bram_maf_id))
return -ENXIO;
/* Read manufacturer and device IDs from Register */
maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
/* Check OneNAND device */
if (maf_id != bram_maf_id || dev_id != bram_dev_id)
return -ENXIO;
return 0;
}
/**
* onenand_probe - [OneNAND Interface] Probe the OneNAND device
* @param mtd MTD device structure
*/
static int onenand_probe(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
int maf_id, dev_id, ver_id;
int density;
int ret;
ret = this->chip_probe(mtd);
if (ret)
return ret;
/* Read manufacturer and device IDs from Register */
maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);
/* Flash device information */
onenand_print_device_info(dev_id, ver_id);
this->device_id = dev_id;
this->version_id = ver_id;
/* Check OneNAND features */
onenand_check_features(mtd);
density = onenand_get_density(dev_id);
if (FLEXONENAND(this)) {
this->dies = ONENAND_IS_DDP(this) ? 2 : 1;
/* Maximum possible erase regions */
mtd->numeraseregions = this->dies << 1;
mtd->eraseregions = kzalloc(sizeof(struct mtd_erase_region_info)
* (this->dies << 1), GFP_KERNEL);
if (!mtd->eraseregions)
return -ENOMEM;
}
/*
* For Flex-OneNAND, chipsize represents maximum possible device size.
* mtd->size represents the actual device size.
*/
this->chipsize = (16 << density) << 20;
/* OneNAND page size & block size */
/* The data buffer size is equal to page size */
mtd->writesize = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
/* We use the full BufferRAM */
if (ONENAND_IS_4KB_PAGE(this))
mtd->writesize <<= 1;
mtd->oobsize = mtd->writesize >> 5;
/* Pages per a block are always 64 in OneNAND */
mtd->erasesize = mtd->writesize << 6;
/*
* Flex-OneNAND SLC area has 64 pages per block.
* Flex-OneNAND MLC area has 128 pages per block.
* Expose MLC erase size to find erase_shift and page_mask.
*/
if (FLEXONENAND(this))
mtd->erasesize <<= 1;
this->erase_shift = ffs(mtd->erasesize) - 1;
this->page_shift = ffs(mtd->writesize) - 1;
this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1;
/* Set density mask. it is used for DDP */
if (ONENAND_IS_DDP(this))
this->density_mask = this->chipsize >> (this->erase_shift + 1);
/* It's real page size */
this->writesize = mtd->writesize;
/* REVISIT: Multichip handling */
if (FLEXONENAND(this))
flexonenand_get_size(mtd);
else
mtd->size = this->chipsize;
/*
* We emulate the 4KiB page and 256KiB erase block size
* But oobsize is still 64 bytes.
* It is only valid if you turn on 2X program support,
* Otherwise it will be ignored by compiler.
*/
if (ONENAND_IS_2PLANE(this)) {
mtd->writesize <<= 1;
mtd->erasesize <<= 1;
}
return 0;
}
/**
* onenand_suspend - [MTD Interface] Suspend the OneNAND flash
* @param mtd MTD device structure
*/
static int onenand_suspend(struct mtd_info *mtd)
{
return onenand_get_device(mtd, FL_PM_SUSPENDED);
}
/**
* onenand_resume - [MTD Interface] Resume the OneNAND flash
* @param mtd MTD device structure
*/
static void onenand_resume(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
if (this->state == FL_PM_SUSPENDED)
onenand_release_device(mtd);
else
printk(KERN_ERR "%s: resume() called for the chip which is not "
"in suspended state\n", __func__);
}
/**
* onenand_scan - [OneNAND Interface] Scan for the OneNAND device
* @param mtd MTD device structure
* @param maxchips Number of chips to scan for
*
* This fills out all the not initialized function pointers
* with the defaults.
* The flash ID is read and the mtd/chip structures are
* filled with the appropriate values.
*/
int onenand_scan(struct mtd_info *mtd, int maxchips)
{
int i, ret;
struct onenand_chip *this = mtd->priv;
if (!this->read_word)
this->read_word = onenand_readw;
if (!this->write_word)
this->write_word = onenand_writew;
if (!this->command)
this->command = onenand_command;
if (!this->wait)
onenand_setup_wait(mtd);
if (!this->bbt_wait)
this->bbt_wait = onenand_bbt_wait;
if (!this->unlock_all)
this->unlock_all = onenand_unlock_all;
if (!this->chip_probe)
this->chip_probe = onenand_chip_probe;
if (!this->read_bufferram)
this->read_bufferram = onenand_read_bufferram;
if (!this->write_bufferram)
this->write_bufferram = onenand_write_bufferram;
if (!this->block_markbad)
this->block_markbad = onenand_default_block_markbad;
if (!this->scan_bbt)
this->scan_bbt = onenand_default_bbt;
if (onenand_probe(mtd))
return -ENXIO;
/* Set Sync. Burst Read after probing */
if (this->mmcontrol) {
printk(KERN_INFO "OneNAND Sync. Burst Read support\n");
this->read_bufferram = onenand_sync_read_bufferram;
}
/* Allocate buffers, if necessary */
if (!this->page_buf) {
this->page_buf = kzalloc(mtd->writesize, GFP_KERNEL);
if (!this->page_buf) {
printk(KERN_ERR "%s: Can't allocate page_buf\n",
__func__);
return -ENOMEM;
}
#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
this->verify_buf = kzalloc(mtd->writesize, GFP_KERNEL);
if (!this->verify_buf) {
kfree(this->page_buf);
return -ENOMEM;
}
#endif
this->options |= ONENAND_PAGEBUF_ALLOC;
}
if (!this->oob_buf) {
this->oob_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
if (!this->oob_buf) {
printk(KERN_ERR "%s: Can't allocate oob_buf\n",
__func__);
if (this->options & ONENAND_PAGEBUF_ALLOC) {
this->options &= ~ONENAND_PAGEBUF_ALLOC;
kfree(this->page_buf);
}
return -ENOMEM;
}
this->options |= ONENAND_OOBBUF_ALLOC;
}
this->state = FL_READY;
init_waitqueue_head(&this->wq);
spin_lock_init(&this->chip_lock);
/*
* Allow subpage writes up to oobsize.
*/
switch (mtd->oobsize) {
case 128:
if (FLEXONENAND(this)) {
this->ecclayout = &flexonenand_oob_128;
mtd->subpage_sft = 0;
} else {
this->ecclayout = &onenand_oob_128;
mtd->subpage_sft = 2;
}
if (ONENAND_IS_NOP_1(this))
mtd->subpage_sft = 0;
break;
case 64:
this->ecclayout = &onenand_oob_64;
mtd->subpage_sft = 2;
break;
case 32:
this->ecclayout = &onenand_oob_32;
mtd->subpage_sft = 1;
break;
default:
printk(KERN_WARNING "%s: No OOB scheme defined for oobsize %d\n",
__func__, mtd->oobsize);
mtd->subpage_sft = 0;
/* To prevent kernel oops */
this->ecclayout = &onenand_oob_32;
break;
}
this->subpagesize = mtd->writesize >> mtd->subpage_sft;
/*
* The number of bytes available for a client to place data into
* the out of band area
*/
this->ecclayout->oobavail = 0;
for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES &&
this->ecclayout->oobfree[i].length; i++)
this->ecclayout->oobavail +=
this->ecclayout->oobfree[i].length;
mtd->oobavail = this->ecclayout->oobavail;
mtd->ecclayout = this->ecclayout;
mtd->ecc_strength = 1;
/* Fill in remaining MTD driver data */
mtd->type = ONENAND_IS_MLC(this) ? MTD_MLCNANDFLASH : MTD_NANDFLASH;
mtd->flags = MTD_CAP_NANDFLASH;
mtd->_erase = onenand_erase;
mtd->_point = NULL;
mtd->_unpoint = NULL;
mtd->_read = onenand_read;
mtd->_write = onenand_write;
mtd->_read_oob = onenand_read_oob;
mtd->_write_oob = onenand_write_oob;
mtd->_panic_write = onenand_panic_write;
#ifdef CONFIG_MTD_ONENAND_OTP
mtd->_get_fact_prot_info = onenand_get_fact_prot_info;
mtd->_read_fact_prot_reg = onenand_read_fact_prot_reg;
mtd->_get_user_prot_info = onenand_get_user_prot_info;
mtd->_read_user_prot_reg = onenand_read_user_prot_reg;
mtd->_write_user_prot_reg = onenand_write_user_prot_reg;
mtd->_lock_user_prot_reg = onenand_lock_user_prot_reg;
#endif
mtd->_sync = onenand_sync;
mtd->_lock = onenand_lock;
mtd->_unlock = onenand_unlock;
mtd->_suspend = onenand_suspend;
mtd->_resume = onenand_resume;
mtd->_block_isbad = onenand_block_isbad;
mtd->_block_markbad = onenand_block_markbad;
mtd->owner = THIS_MODULE;
mtd->writebufsize = mtd->writesize;
/* Unlock whole block */
if (!(this->options & ONENAND_SKIP_INITIAL_UNLOCKING))
this->unlock_all(mtd);
ret = this->scan_bbt(mtd);
if ((!FLEXONENAND(this)) || ret)
return ret;
/* Change Flex-OneNAND boundaries if required */
for (i = 0; i < MAX_DIES; i++)
flexonenand_set_boundary(mtd, i, flex_bdry[2 * i],
flex_bdry[(2 * i) + 1]);
return 0;
}
/**
* onenand_release - [OneNAND Interface] Free resources held by the OneNAND device
* @param mtd MTD device structure
*/
void onenand_release(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
/* Deregister partitions */
mtd_device_unregister(mtd);
/* Free bad block table memory, if allocated */
if (this->bbm) {
struct bbm_info *bbm = this->bbm;
kfree(bbm->bbt);
kfree(this->bbm);
}
/* Buffers allocated by onenand_scan */
if (this->options & ONENAND_PAGEBUF_ALLOC) {
kfree(this->page_buf);
#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
kfree(this->verify_buf);
#endif
}
if (this->options & ONENAND_OOBBUF_ALLOC)
kfree(this->oob_buf);
kfree(mtd->eraseregions);
}
EXPORT_SYMBOL_GPL(onenand_scan);
EXPORT_SYMBOL_GPL(onenand_release);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
MODULE_DESCRIPTION("Generic OneNAND flash driver code");
Reference in New Issue View Git Blame Copy Permalink