mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-19 22:58:02 +07:00
4ebe34503b
The current implementation of acpiphp_check_bridge() is pretty dumb: - It enables a slot if it's not enabled and the slot status is ACPI_STA_ALL. - It disables a slot if it's enabled and the slot status is not ACPI_STA_ALL. This behavior is not sufficient to handle the Thunderbolt daisy chaining case properly, however, because in that case the bus behind the already enabled slot needs to be rescanned for new devices. For this reason, modify acpiphp_check_bridge() so that slots are disabled and stopped if they are not in the ACPI_STA_ALL state. For slots in the ACPI_STA_ALL state, devices behind them that don't respond are trimmed using a new function, trim_stale_devices(), introduced specifically for this purpose. That function walks the given bus and checks each device on it. If the device doesn't respond, it is assumed to be gone and is removed. Once all of the stale devices directy behind the slot have been removed, acpiphp_check_bridge() will start looking for new devices that might have appeared on the given bus. It will do that even if the slot is already enabled (SLOT_ENABLED is set for it). In addition to that, make the bus check notification ignore SLOT_ENABLED and go for enable_device() directly if bridge is NULL, so that devices behind the slot are re-enumerated in that case too. This change is based on earlier patches from Kirill A Shutemov and Mika Westerberg. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
1130 lines
27 KiB
C
1130 lines
27 KiB
C
/*
|
|
* ACPI PCI HotPlug glue functions to ACPI CA subsystem
|
|
*
|
|
* Copyright (C) 2002,2003 Takayoshi Kochi (t-kochi@bq.jp.nec.com)
|
|
* Copyright (C) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com)
|
|
* Copyright (C) 2002,2003 NEC Corporation
|
|
* Copyright (C) 2003-2005 Matthew Wilcox (matthew.wilcox@hp.com)
|
|
* Copyright (C) 2003-2005 Hewlett Packard
|
|
* Copyright (C) 2005 Rajesh Shah (rajesh.shah@intel.com)
|
|
* Copyright (C) 2005 Intel Corporation
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
|
|
* NON INFRINGEMENT. See the GNU General Public License for more
|
|
* details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Send feedback to <kristen.c.accardi@intel.com>
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* Lifetime rules for pci_dev:
|
|
* - The one in acpiphp_bridge has its refcount elevated by pci_get_slot()
|
|
* when the bridge is scanned and it loses a refcount when the bridge
|
|
* is removed.
|
|
* - When a P2P bridge is present, we elevate the refcount on the subordinate
|
|
* bus. It loses the refcount when the the driver unloads.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci_hotplug.h>
|
|
#include <linux/pci-acpi.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/acpi.h>
|
|
|
|
#include "../pci.h"
|
|
#include "acpiphp.h"
|
|
|
|
static LIST_HEAD(bridge_list);
|
|
static DEFINE_MUTEX(bridge_mutex);
|
|
static DEFINE_MUTEX(acpiphp_context_lock);
|
|
|
|
#define MY_NAME "acpiphp_glue"
|
|
|
|
static void handle_hotplug_event(acpi_handle handle, u32 type, void *data);
|
|
static void acpiphp_sanitize_bus(struct pci_bus *bus);
|
|
static void acpiphp_set_hpp_values(struct pci_bus *bus);
|
|
static void hotplug_event(acpi_handle handle, u32 type, void *data);
|
|
static void free_bridge(struct kref *kref);
|
|
|
|
static void acpiphp_context_handler(acpi_handle handle, void *context)
|
|
{
|
|
/* Intentionally empty. */
|
|
}
|
|
|
|
/**
|
|
* acpiphp_init_context - Create hotplug context and grab a reference to it.
|
|
* @handle: ACPI object handle to create the context for.
|
|
*
|
|
* Call under acpiphp_context_lock.
|
|
*/
|
|
static struct acpiphp_context *acpiphp_init_context(acpi_handle handle)
|
|
{
|
|
struct acpiphp_context *context;
|
|
acpi_status status;
|
|
|
|
context = kzalloc(sizeof(*context), GFP_KERNEL);
|
|
if (!context)
|
|
return NULL;
|
|
|
|
context->handle = handle;
|
|
context->refcount = 1;
|
|
status = acpi_attach_data(handle, acpiphp_context_handler, context);
|
|
if (ACPI_FAILURE(status)) {
|
|
kfree(context);
|
|
return NULL;
|
|
}
|
|
return context;
|
|
}
|
|
|
|
/**
|
|
* acpiphp_get_context - Get hotplug context and grab a reference to it.
|
|
* @handle: ACPI object handle to get the context for.
|
|
*
|
|
* Call under acpiphp_context_lock.
|
|
*/
|
|
static struct acpiphp_context *acpiphp_get_context(acpi_handle handle)
|
|
{
|
|
struct acpiphp_context *context = NULL;
|
|
acpi_status status;
|
|
void *data;
|
|
|
|
status = acpi_get_data(handle, acpiphp_context_handler, &data);
|
|
if (ACPI_SUCCESS(status)) {
|
|
context = data;
|
|
context->refcount++;
|
|
}
|
|
return context;
|
|
}
|
|
|
|
/**
|
|
* acpiphp_put_context - Drop a reference to ACPI hotplug context.
|
|
* @handle: ACPI object handle to put the context for.
|
|
*
|
|
* The context object is removed if there are no more references to it.
|
|
*
|
|
* Call under acpiphp_context_lock.
|
|
*/
|
|
static void acpiphp_put_context(struct acpiphp_context *context)
|
|
{
|
|
if (--context->refcount)
|
|
return;
|
|
|
|
WARN_ON(context->bridge);
|
|
acpi_detach_data(context->handle, acpiphp_context_handler);
|
|
kfree(context);
|
|
}
|
|
|
|
static inline void get_bridge(struct acpiphp_bridge *bridge)
|
|
{
|
|
kref_get(&bridge->ref);
|
|
}
|
|
|
|
static inline void put_bridge(struct acpiphp_bridge *bridge)
|
|
{
|
|
kref_put(&bridge->ref, free_bridge);
|
|
}
|
|
|
|
static void free_bridge(struct kref *kref)
|
|
{
|
|
struct acpiphp_context *context;
|
|
struct acpiphp_bridge *bridge;
|
|
struct acpiphp_slot *slot, *next;
|
|
struct acpiphp_func *func, *tmp;
|
|
|
|
mutex_lock(&acpiphp_context_lock);
|
|
|
|
bridge = container_of(kref, struct acpiphp_bridge, ref);
|
|
|
|
list_for_each_entry_safe(slot, next, &bridge->slots, node) {
|
|
list_for_each_entry_safe(func, tmp, &slot->funcs, sibling)
|
|
acpiphp_put_context(func_to_context(func));
|
|
|
|
kfree(slot);
|
|
}
|
|
|
|
context = bridge->context;
|
|
/* Root bridges will not have hotplug context. */
|
|
if (context) {
|
|
/* Release the reference taken by acpiphp_enumerate_slots(). */
|
|
put_bridge(context->func.parent);
|
|
context->bridge = NULL;
|
|
acpiphp_put_context(context);
|
|
}
|
|
|
|
put_device(&bridge->pci_bus->dev);
|
|
pci_dev_put(bridge->pci_dev);
|
|
kfree(bridge);
|
|
|
|
mutex_unlock(&acpiphp_context_lock);
|
|
}
|
|
|
|
/*
|
|
* the _DCK method can do funny things... and sometimes not
|
|
* hah-hah funny.
|
|
*
|
|
* TBD - figure out a way to only call fixups for
|
|
* systems that require them.
|
|
*/
|
|
static void post_dock_fixups(acpi_handle not_used, u32 event, void *data)
|
|
{
|
|
struct acpiphp_context *context = data;
|
|
struct pci_bus *bus = context->func.slot->bus;
|
|
u32 buses;
|
|
|
|
if (!bus->self)
|
|
return;
|
|
|
|
/* fixup bad _DCK function that rewrites
|
|
* secondary bridge on slot
|
|
*/
|
|
pci_read_config_dword(bus->self,
|
|
PCI_PRIMARY_BUS,
|
|
&buses);
|
|
|
|
if (((buses >> 8) & 0xff) != bus->busn_res.start) {
|
|
buses = (buses & 0xff000000)
|
|
| ((unsigned int)(bus->primary) << 0)
|
|
| ((unsigned int)(bus->busn_res.start) << 8)
|
|
| ((unsigned int)(bus->busn_res.end) << 16);
|
|
pci_write_config_dword(bus->self, PCI_PRIMARY_BUS, buses);
|
|
}
|
|
}
|
|
|
|
|
|
static const struct acpi_dock_ops acpiphp_dock_ops = {
|
|
.fixup = post_dock_fixups,
|
|
.handler = hotplug_event,
|
|
};
|
|
|
|
/* Check whether the PCI device is managed by native PCIe hotplug driver */
|
|
static bool device_is_managed_by_native_pciehp(struct pci_dev *pdev)
|
|
{
|
|
u32 reg32;
|
|
acpi_handle tmp;
|
|
struct acpi_pci_root *root;
|
|
|
|
/* Check whether the PCIe port supports native PCIe hotplug */
|
|
if (pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, ®32))
|
|
return false;
|
|
if (!(reg32 & PCI_EXP_SLTCAP_HPC))
|
|
return false;
|
|
|
|
/*
|
|
* Check whether native PCIe hotplug has been enabled for
|
|
* this PCIe hierarchy.
|
|
*/
|
|
tmp = acpi_find_root_bridge_handle(pdev);
|
|
if (!tmp)
|
|
return false;
|
|
root = acpi_pci_find_root(tmp);
|
|
if (!root)
|
|
return false;
|
|
if (!(root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static void acpiphp_dock_init(void *data)
|
|
{
|
|
struct acpiphp_context *context = data;
|
|
|
|
get_bridge(context->func.parent);
|
|
}
|
|
|
|
static void acpiphp_dock_release(void *data)
|
|
{
|
|
struct acpiphp_context *context = data;
|
|
|
|
put_bridge(context->func.parent);
|
|
}
|
|
|
|
/* callback routine to register each ACPI PCI slot object */
|
|
static acpi_status register_slot(acpi_handle handle, u32 lvl, void *data,
|
|
void **rv)
|
|
{
|
|
struct acpiphp_bridge *bridge = data;
|
|
struct acpiphp_context *context;
|
|
struct acpiphp_slot *slot;
|
|
struct acpiphp_func *newfunc;
|
|
acpi_status status = AE_OK;
|
|
unsigned long long adr;
|
|
int device, function;
|
|
struct pci_bus *pbus = bridge->pci_bus;
|
|
struct pci_dev *pdev = bridge->pci_dev;
|
|
u32 val;
|
|
|
|
if (pdev && device_is_managed_by_native_pciehp(pdev))
|
|
return AE_OK;
|
|
|
|
status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
|
|
if (ACPI_FAILURE(status)) {
|
|
acpi_handle_warn(handle, "can't evaluate _ADR (%#x)\n", status);
|
|
return AE_OK;
|
|
}
|
|
|
|
device = (adr >> 16) & 0xffff;
|
|
function = adr & 0xffff;
|
|
|
|
mutex_lock(&acpiphp_context_lock);
|
|
context = acpiphp_init_context(handle);
|
|
if (!context) {
|
|
mutex_unlock(&acpiphp_context_lock);
|
|
acpi_handle_err(handle, "No hotplug context\n");
|
|
return AE_NOT_EXIST;
|
|
}
|
|
newfunc = &context->func;
|
|
newfunc->function = function;
|
|
newfunc->parent = bridge;
|
|
mutex_unlock(&acpiphp_context_lock);
|
|
|
|
if (acpi_has_method(handle, "_EJ0"))
|
|
newfunc->flags = FUNC_HAS_EJ0;
|
|
|
|
if (acpi_has_method(handle, "_STA"))
|
|
newfunc->flags |= FUNC_HAS_STA;
|
|
|
|
if (acpi_has_method(handle, "_DCK"))
|
|
newfunc->flags |= FUNC_HAS_DCK;
|
|
|
|
/* search for objects that share the same slot */
|
|
list_for_each_entry(slot, &bridge->slots, node)
|
|
if (slot->device == device)
|
|
goto slot_found;
|
|
|
|
slot = kzalloc(sizeof(struct acpiphp_slot), GFP_KERNEL);
|
|
if (!slot) {
|
|
status = AE_NO_MEMORY;
|
|
goto err;
|
|
}
|
|
|
|
slot->bus = bridge->pci_bus;
|
|
slot->device = device;
|
|
INIT_LIST_HEAD(&slot->funcs);
|
|
mutex_init(&slot->crit_sect);
|
|
|
|
mutex_lock(&bridge_mutex);
|
|
list_add_tail(&slot->node, &bridge->slots);
|
|
mutex_unlock(&bridge_mutex);
|
|
|
|
/* Register slots for ejectable funtions only. */
|
|
if (acpi_pci_check_ejectable(pbus, handle) || is_dock_device(handle)) {
|
|
unsigned long long sun;
|
|
int retval;
|
|
|
|
bridge->nr_slots++;
|
|
status = acpi_evaluate_integer(handle, "_SUN", NULL, &sun);
|
|
if (ACPI_FAILURE(status))
|
|
sun = bridge->nr_slots;
|
|
|
|
dbg("found ACPI PCI Hotplug slot %llu at PCI %04x:%02x:%02x\n",
|
|
sun, pci_domain_nr(pbus), pbus->number, device);
|
|
|
|
retval = acpiphp_register_hotplug_slot(slot, sun);
|
|
if (retval) {
|
|
bridge->nr_slots--;
|
|
if (retval == -EBUSY)
|
|
warn("Slot %llu already registered by another "
|
|
"hotplug driver\n", sun);
|
|
else
|
|
warn("acpiphp_register_hotplug_slot failed "
|
|
"(err code = 0x%x)\n", retval);
|
|
}
|
|
/* Even if the slot registration fails, we can still use it. */
|
|
}
|
|
|
|
slot_found:
|
|
newfunc->slot = slot;
|
|
mutex_lock(&bridge_mutex);
|
|
list_add_tail(&newfunc->sibling, &slot->funcs);
|
|
mutex_unlock(&bridge_mutex);
|
|
|
|
if (pci_bus_read_dev_vendor_id(pbus, PCI_DEVFN(device, function),
|
|
&val, 60*1000))
|
|
slot->flags |= SLOT_ENABLED;
|
|
|
|
if (is_dock_device(handle)) {
|
|
/* we don't want to call this device's _EJ0
|
|
* because we want the dock notify handler
|
|
* to call it after it calls _DCK
|
|
*/
|
|
newfunc->flags &= ~FUNC_HAS_EJ0;
|
|
if (register_hotplug_dock_device(handle,
|
|
&acpiphp_dock_ops, context,
|
|
acpiphp_dock_init, acpiphp_dock_release))
|
|
dbg("failed to register dock device\n");
|
|
}
|
|
|
|
/* install notify handler */
|
|
if (!(newfunc->flags & FUNC_HAS_DCK)) {
|
|
status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
|
|
handle_hotplug_event,
|
|
context);
|
|
if (ACPI_FAILURE(status))
|
|
acpi_handle_err(handle,
|
|
"failed to install notify handler\n");
|
|
}
|
|
|
|
return AE_OK;
|
|
|
|
err:
|
|
mutex_lock(&acpiphp_context_lock);
|
|
acpiphp_put_context(context);
|
|
mutex_unlock(&acpiphp_context_lock);
|
|
return status;
|
|
}
|
|
|
|
static struct acpiphp_bridge *acpiphp_handle_to_bridge(acpi_handle handle)
|
|
{
|
|
struct acpiphp_context *context;
|
|
struct acpiphp_bridge *bridge = NULL;
|
|
|
|
mutex_lock(&acpiphp_context_lock);
|
|
context = acpiphp_get_context(handle);
|
|
if (context) {
|
|
bridge = context->bridge;
|
|
if (bridge)
|
|
get_bridge(bridge);
|
|
|
|
acpiphp_put_context(context);
|
|
}
|
|
mutex_unlock(&acpiphp_context_lock);
|
|
return bridge;
|
|
}
|
|
|
|
static void cleanup_bridge(struct acpiphp_bridge *bridge)
|
|
{
|
|
struct acpiphp_slot *slot;
|
|
struct acpiphp_func *func;
|
|
acpi_status status;
|
|
|
|
list_for_each_entry(slot, &bridge->slots, node) {
|
|
list_for_each_entry(func, &slot->funcs, sibling) {
|
|
acpi_handle handle = func_to_handle(func);
|
|
|
|
if (is_dock_device(handle))
|
|
unregister_hotplug_dock_device(handle);
|
|
|
|
if (!(func->flags & FUNC_HAS_DCK)) {
|
|
status = acpi_remove_notify_handler(handle,
|
|
ACPI_SYSTEM_NOTIFY,
|
|
handle_hotplug_event);
|
|
if (ACPI_FAILURE(status))
|
|
err("failed to remove notify handler\n");
|
|
}
|
|
}
|
|
acpiphp_unregister_hotplug_slot(slot);
|
|
}
|
|
|
|
mutex_lock(&bridge_mutex);
|
|
list_del(&bridge->list);
|
|
mutex_unlock(&bridge_mutex);
|
|
}
|
|
|
|
/**
|
|
* acpiphp_max_busnr - return the highest reserved bus number under the given bus.
|
|
* @bus: bus to start search with
|
|
*/
|
|
static unsigned char acpiphp_max_busnr(struct pci_bus *bus)
|
|
{
|
|
struct list_head *tmp;
|
|
unsigned char max, n;
|
|
|
|
/*
|
|
* pci_bus_max_busnr will return the highest
|
|
* reserved busnr for all these children.
|
|
* that is equivalent to the bus->subordinate
|
|
* value. We don't want to use the parent's
|
|
* bus->subordinate value because it could have
|
|
* padding in it.
|
|
*/
|
|
max = bus->busn_res.start;
|
|
|
|
list_for_each(tmp, &bus->children) {
|
|
n = pci_bus_max_busnr(pci_bus_b(tmp));
|
|
if (n > max)
|
|
max = n;
|
|
}
|
|
return max;
|
|
}
|
|
|
|
/**
|
|
* acpiphp_bus_trim - Trim device objects in an ACPI namespace subtree.
|
|
* @handle: ACPI device object handle to start from.
|
|
*/
|
|
static void acpiphp_bus_trim(acpi_handle handle)
|
|
{
|
|
struct acpi_device *adev = NULL;
|
|
|
|
acpi_bus_get_device(handle, &adev);
|
|
if (adev)
|
|
acpi_bus_trim(adev);
|
|
}
|
|
|
|
/**
|
|
* acpiphp_bus_add - Scan ACPI namespace subtree.
|
|
* @handle: ACPI object handle to start the scan from.
|
|
*/
|
|
static void acpiphp_bus_add(acpi_handle handle)
|
|
{
|
|
struct acpi_device *adev = NULL;
|
|
|
|
acpiphp_bus_trim(handle);
|
|
acpi_bus_scan(handle);
|
|
acpi_bus_get_device(handle, &adev);
|
|
if (adev)
|
|
acpi_device_set_power(adev, ACPI_STATE_D0);
|
|
}
|
|
|
|
static void acpiphp_set_acpi_region(struct acpiphp_slot *slot)
|
|
{
|
|
struct acpiphp_func *func;
|
|
union acpi_object params[2];
|
|
struct acpi_object_list arg_list;
|
|
|
|
list_for_each_entry(func, &slot->funcs, sibling) {
|
|
arg_list.count = 2;
|
|
arg_list.pointer = params;
|
|
params[0].type = ACPI_TYPE_INTEGER;
|
|
params[0].integer.value = ACPI_ADR_SPACE_PCI_CONFIG;
|
|
params[1].type = ACPI_TYPE_INTEGER;
|
|
params[1].integer.value = 1;
|
|
/* _REG is optional, we don't care about if there is failure */
|
|
acpi_evaluate_object(func_to_handle(func), "_REG", &arg_list,
|
|
NULL);
|
|
}
|
|
}
|
|
|
|
static void check_hotplug_bridge(struct acpiphp_slot *slot, struct pci_dev *dev)
|
|
{
|
|
struct acpiphp_func *func;
|
|
|
|
/* quirk, or pcie could set it already */
|
|
if (dev->is_hotplug_bridge)
|
|
return;
|
|
|
|
list_for_each_entry(func, &slot->funcs, sibling) {
|
|
if (PCI_FUNC(dev->devfn) == func->function) {
|
|
dev->is_hotplug_bridge = 1;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* enable_device - enable, configure a slot
|
|
* @slot: slot to be enabled
|
|
*
|
|
* This function should be called per *physical slot*,
|
|
* not per each slot object in ACPI namespace.
|
|
*/
|
|
static int __ref enable_device(struct acpiphp_slot *slot)
|
|
{
|
|
struct pci_dev *dev;
|
|
struct pci_bus *bus = slot->bus;
|
|
struct acpiphp_func *func;
|
|
int max, pass;
|
|
LIST_HEAD(add_list);
|
|
|
|
list_for_each_entry(func, &slot->funcs, sibling)
|
|
acpiphp_bus_add(func_to_handle(func));
|
|
|
|
pci_scan_slot(bus, PCI_DEVFN(slot->device, 0));
|
|
|
|
max = acpiphp_max_busnr(bus);
|
|
for (pass = 0; pass < 2; pass++) {
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
if (PCI_SLOT(dev->devfn) != slot->device)
|
|
continue;
|
|
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
|
|
dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
|
|
max = pci_scan_bridge(bus, dev, max, pass);
|
|
if (pass && dev->subordinate) {
|
|
check_hotplug_bridge(slot, dev);
|
|
pcibios_resource_survey_bus(dev->subordinate);
|
|
__pci_bus_size_bridges(dev->subordinate,
|
|
&add_list);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
__pci_bus_assign_resources(bus, &add_list, NULL);
|
|
acpiphp_sanitize_bus(bus);
|
|
acpiphp_set_hpp_values(bus);
|
|
acpiphp_set_acpi_region(slot);
|
|
pci_enable_bridges(bus);
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
/* Assume that newly added devices are powered on already. */
|
|
if (!dev->is_added)
|
|
dev->current_state = PCI_D0;
|
|
}
|
|
|
|
pci_bus_add_devices(bus);
|
|
|
|
slot->flags |= SLOT_ENABLED;
|
|
list_for_each_entry(func, &slot->funcs, sibling) {
|
|
dev = pci_get_slot(bus, PCI_DEVFN(slot->device,
|
|
func->function));
|
|
if (!dev) {
|
|
/* Do not set SLOT_ENABLED flag if some funcs
|
|
are not added. */
|
|
slot->flags &= (~SLOT_ENABLED);
|
|
continue;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* return first device in slot, acquiring a reference on it */
|
|
static struct pci_dev *dev_in_slot(struct acpiphp_slot *slot)
|
|
{
|
|
struct pci_bus *bus = slot->bus;
|
|
struct pci_dev *dev;
|
|
struct pci_dev *ret = NULL;
|
|
|
|
down_read(&pci_bus_sem);
|
|
list_for_each_entry(dev, &bus->devices, bus_list)
|
|
if (PCI_SLOT(dev->devfn) == slot->device) {
|
|
ret = pci_dev_get(dev);
|
|
break;
|
|
}
|
|
up_read(&pci_bus_sem);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* disable_device - disable a slot
|
|
* @slot: ACPI PHP slot
|
|
*/
|
|
static int disable_device(struct acpiphp_slot *slot)
|
|
{
|
|
struct acpiphp_func *func;
|
|
struct pci_dev *pdev;
|
|
|
|
/*
|
|
* enable_device() enumerates all functions in this device via
|
|
* pci_scan_slot(), whether they have associated ACPI hotplug
|
|
* methods (_EJ0, etc.) or not. Therefore, we remove all functions
|
|
* here.
|
|
*/
|
|
while ((pdev = dev_in_slot(slot))) {
|
|
pci_stop_and_remove_bus_device(pdev);
|
|
pci_dev_put(pdev);
|
|
}
|
|
|
|
list_for_each_entry(func, &slot->funcs, sibling)
|
|
acpiphp_bus_trim(func_to_handle(func));
|
|
|
|
slot->flags &= (~SLOT_ENABLED);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* get_slot_status - get ACPI slot status
|
|
* @slot: ACPI PHP slot
|
|
*
|
|
* If a slot has _STA for each function and if any one of them
|
|
* returned non-zero status, return it.
|
|
*
|
|
* If a slot doesn't have _STA and if any one of its functions'
|
|
* configuration space is configured, return 0x0f as a _STA.
|
|
*
|
|
* Otherwise return 0.
|
|
*/
|
|
static unsigned int get_slot_status(struct acpiphp_slot *slot)
|
|
{
|
|
unsigned long long sta = 0;
|
|
struct acpiphp_func *func;
|
|
|
|
list_for_each_entry(func, &slot->funcs, sibling) {
|
|
if (func->flags & FUNC_HAS_STA) {
|
|
acpi_status status;
|
|
|
|
status = acpi_evaluate_integer(func_to_handle(func),
|
|
"_STA", NULL, &sta);
|
|
if (ACPI_SUCCESS(status) && sta)
|
|
break;
|
|
} else {
|
|
u32 dvid;
|
|
|
|
pci_bus_read_config_dword(slot->bus,
|
|
PCI_DEVFN(slot->device,
|
|
func->function),
|
|
PCI_VENDOR_ID, &dvid);
|
|
if (dvid != 0xffffffff) {
|
|
sta = ACPI_STA_ALL;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
return (unsigned int)sta;
|
|
}
|
|
|
|
/**
|
|
* trim_stale_devices - remove PCI devices that are not responding.
|
|
* @dev: PCI device to start walking the hierarchy from.
|
|
*/
|
|
static void trim_stale_devices(struct pci_dev *dev)
|
|
{
|
|
acpi_handle handle = ACPI_HANDLE(&dev->dev);
|
|
struct pci_bus *bus = dev->subordinate;
|
|
bool alive = false;
|
|
|
|
if (handle) {
|
|
acpi_status status;
|
|
unsigned long long sta;
|
|
|
|
status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
|
|
alive = ACPI_SUCCESS(status) && sta == ACPI_STA_ALL;
|
|
}
|
|
if (!alive) {
|
|
u32 v;
|
|
|
|
/* Check if the device responds. */
|
|
alive = pci_bus_read_dev_vendor_id(dev->bus, dev->devfn, &v, 0);
|
|
}
|
|
if (!alive) {
|
|
pci_stop_and_remove_bus_device(dev);
|
|
if (handle)
|
|
acpiphp_bus_trim(handle);
|
|
} else if (bus) {
|
|
struct pci_dev *child, *tmp;
|
|
|
|
/* The device is a bridge. so check the bus below it. */
|
|
pm_runtime_get_sync(&dev->dev);
|
|
list_for_each_entry_safe(child, tmp, &bus->devices, bus_list)
|
|
trim_stale_devices(child);
|
|
|
|
pm_runtime_put(&dev->dev);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* acpiphp_check_bridge - re-enumerate devices
|
|
* @bridge: where to begin re-enumeration
|
|
*
|
|
* Iterate over all slots under this bridge and make sure that if a
|
|
* card is present they are enabled, and if not they are disabled.
|
|
*/
|
|
static void acpiphp_check_bridge(struct acpiphp_bridge *bridge)
|
|
{
|
|
struct acpiphp_slot *slot;
|
|
|
|
list_for_each_entry(slot, &bridge->slots, node) {
|
|
struct pci_bus *bus = slot->bus;
|
|
struct pci_dev *dev, *tmp;
|
|
|
|
mutex_lock(&slot->crit_sect);
|
|
/* wake up all functions */
|
|
if (get_slot_status(slot) == ACPI_STA_ALL) {
|
|
/* remove stale devices if any */
|
|
list_for_each_entry_safe(dev, tmp, &bus->devices,
|
|
bus_list)
|
|
if (PCI_SLOT(dev->devfn) == slot->device)
|
|
trim_stale_devices(dev);
|
|
|
|
/* configure all functions */
|
|
enable_device(slot);
|
|
} else {
|
|
disable_device(slot);
|
|
}
|
|
mutex_unlock(&slot->crit_sect);
|
|
}
|
|
}
|
|
|
|
static void acpiphp_set_hpp_values(struct pci_bus *bus)
|
|
{
|
|
struct pci_dev *dev;
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list)
|
|
pci_configure_slot(dev);
|
|
}
|
|
|
|
/*
|
|
* Remove devices for which we could not assign resources, call
|
|
* arch specific code to fix-up the bus
|
|
*/
|
|
static void acpiphp_sanitize_bus(struct pci_bus *bus)
|
|
{
|
|
struct pci_dev *dev, *tmp;
|
|
int i;
|
|
unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM;
|
|
|
|
list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
|
|
for (i=0; i<PCI_BRIDGE_RESOURCES; i++) {
|
|
struct resource *res = &dev->resource[i];
|
|
if ((res->flags & type_mask) && !res->start &&
|
|
res->end) {
|
|
/* Could not assign a required resources
|
|
* for this device, remove it */
|
|
pci_stop_and_remove_bus_device(dev);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* ACPI event handlers
|
|
*/
|
|
|
|
static acpi_status
|
|
check_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
|
|
{
|
|
struct acpiphp_bridge *bridge;
|
|
char objname[64];
|
|
struct acpi_buffer buffer = { .length = sizeof(objname),
|
|
.pointer = objname };
|
|
|
|
bridge = acpiphp_handle_to_bridge(handle);
|
|
if (bridge) {
|
|
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
|
|
dbg("%s: re-enumerating slots under %s\n",
|
|
__func__, objname);
|
|
acpiphp_check_bridge(bridge);
|
|
put_bridge(bridge);
|
|
}
|
|
return AE_OK ;
|
|
}
|
|
|
|
void acpiphp_check_host_bridge(acpi_handle handle)
|
|
{
|
|
struct acpiphp_bridge *bridge;
|
|
|
|
bridge = acpiphp_handle_to_bridge(handle);
|
|
if (bridge) {
|
|
acpiphp_check_bridge(bridge);
|
|
put_bridge(bridge);
|
|
}
|
|
|
|
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
|
|
ACPI_UINT32_MAX, check_sub_bridges, NULL, NULL, NULL);
|
|
}
|
|
|
|
static void hotplug_event(acpi_handle handle, u32 type, void *data)
|
|
{
|
|
struct acpiphp_context *context = data;
|
|
struct acpiphp_func *func = &context->func;
|
|
struct acpiphp_bridge *bridge;
|
|
char objname[64];
|
|
struct acpi_buffer buffer = { .length = sizeof(objname),
|
|
.pointer = objname };
|
|
|
|
mutex_lock(&acpiphp_context_lock);
|
|
bridge = context->bridge;
|
|
if (bridge)
|
|
get_bridge(bridge);
|
|
|
|
mutex_unlock(&acpiphp_context_lock);
|
|
|
|
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
|
|
|
|
switch (type) {
|
|
case ACPI_NOTIFY_BUS_CHECK:
|
|
/* bus re-enumerate */
|
|
dbg("%s: Bus check notify on %s\n", __func__, objname);
|
|
dbg("%s: re-enumerating slots under %s\n", __func__, objname);
|
|
if (bridge) {
|
|
acpiphp_check_bridge(bridge);
|
|
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
|
|
ACPI_UINT32_MAX, check_sub_bridges,
|
|
NULL, NULL, NULL);
|
|
} else {
|
|
struct acpiphp_slot *slot = func->slot;
|
|
|
|
mutex_lock(&slot->crit_sect);
|
|
enable_device(slot);
|
|
mutex_unlock(&slot->crit_sect);
|
|
}
|
|
break;
|
|
|
|
case ACPI_NOTIFY_DEVICE_CHECK:
|
|
/* device check */
|
|
dbg("%s: Device check notify on %s\n", __func__, objname);
|
|
if (bridge)
|
|
acpiphp_check_bridge(bridge);
|
|
else
|
|
acpiphp_check_bridge(func->parent);
|
|
|
|
break;
|
|
|
|
case ACPI_NOTIFY_EJECT_REQUEST:
|
|
/* request device eject */
|
|
dbg("%s: Device eject notify on %s\n", __func__, objname);
|
|
acpiphp_disable_and_eject_slot(func->slot);
|
|
break;
|
|
}
|
|
|
|
if (bridge)
|
|
put_bridge(bridge);
|
|
}
|
|
|
|
static void hotplug_event_work(struct work_struct *work)
|
|
{
|
|
struct acpiphp_context *context;
|
|
struct acpi_hp_work *hp_work;
|
|
|
|
hp_work = container_of(work, struct acpi_hp_work, work);
|
|
context = hp_work->context;
|
|
acpi_scan_lock_acquire();
|
|
|
|
hotplug_event(hp_work->handle, hp_work->type, context);
|
|
|
|
acpi_scan_lock_release();
|
|
kfree(hp_work); /* allocated in handle_hotplug_event() */
|
|
put_bridge(context->func.parent);
|
|
}
|
|
|
|
/**
|
|
* handle_hotplug_event - handle ACPI hotplug event
|
|
* @handle: Notify()'ed acpi_handle
|
|
* @type: Notify code
|
|
* @data: pointer to acpiphp_context structure
|
|
*
|
|
* Handles ACPI event notification on slots.
|
|
*/
|
|
static void handle_hotplug_event(acpi_handle handle, u32 type, void *data)
|
|
{
|
|
struct acpiphp_context *context;
|
|
|
|
switch (type) {
|
|
case ACPI_NOTIFY_BUS_CHECK:
|
|
case ACPI_NOTIFY_DEVICE_CHECK:
|
|
case ACPI_NOTIFY_EJECT_REQUEST:
|
|
break;
|
|
|
|
case ACPI_NOTIFY_DEVICE_WAKE:
|
|
return;
|
|
|
|
case ACPI_NOTIFY_FREQUENCY_MISMATCH:
|
|
acpi_handle_err(handle, "Device cannot be configured due "
|
|
"to a frequency mismatch\n");
|
|
return;
|
|
|
|
case ACPI_NOTIFY_BUS_MODE_MISMATCH:
|
|
acpi_handle_err(handle, "Device cannot be configured due "
|
|
"to a bus mode mismatch\n");
|
|
return;
|
|
|
|
case ACPI_NOTIFY_POWER_FAULT:
|
|
acpi_handle_err(handle, "Device has suffered a power fault\n");
|
|
return;
|
|
|
|
default:
|
|
acpi_handle_warn(handle, "Unsupported event type 0x%x\n", type);
|
|
return;
|
|
}
|
|
|
|
mutex_lock(&acpiphp_context_lock);
|
|
context = acpiphp_get_context(handle);
|
|
if (context) {
|
|
get_bridge(context->func.parent);
|
|
acpiphp_put_context(context);
|
|
alloc_acpi_hp_work(handle, type, context, hotplug_event_work);
|
|
}
|
|
mutex_unlock(&acpiphp_context_lock);
|
|
}
|
|
|
|
/*
|
|
* Create hotplug slots for the PCI bus.
|
|
* It should always return 0 to avoid skipping following notifiers.
|
|
*/
|
|
void acpiphp_enumerate_slots(struct pci_bus *bus)
|
|
{
|
|
struct acpiphp_bridge *bridge;
|
|
acpi_handle handle;
|
|
acpi_status status;
|
|
|
|
if (acpiphp_disabled)
|
|
return;
|
|
|
|
handle = ACPI_HANDLE(bus->bridge);
|
|
if (!handle)
|
|
return;
|
|
|
|
bridge = kzalloc(sizeof(struct acpiphp_bridge), GFP_KERNEL);
|
|
if (!bridge) {
|
|
acpi_handle_err(handle, "No memory for bridge object\n");
|
|
return;
|
|
}
|
|
|
|
INIT_LIST_HEAD(&bridge->slots);
|
|
kref_init(&bridge->ref);
|
|
bridge->pci_dev = pci_dev_get(bus->self);
|
|
bridge->pci_bus = bus;
|
|
|
|
/*
|
|
* Grab a ref to the subordinate PCI bus in case the bus is
|
|
* removed via PCI core logical hotplug. The ref pins the bus
|
|
* (which we access during module unload).
|
|
*/
|
|
get_device(&bus->dev);
|
|
|
|
if (!pci_is_root_bus(bridge->pci_bus)) {
|
|
struct acpiphp_context *context;
|
|
|
|
/*
|
|
* This bridge should have been registered as a hotplug function
|
|
* under its parent, so the context has to be there. If not, we
|
|
* are in deep goo.
|
|
*/
|
|
mutex_lock(&acpiphp_context_lock);
|
|
context = acpiphp_get_context(handle);
|
|
if (WARN_ON(!context)) {
|
|
mutex_unlock(&acpiphp_context_lock);
|
|
put_device(&bus->dev);
|
|
kfree(bridge);
|
|
return;
|
|
}
|
|
bridge->context = context;
|
|
context->bridge = bridge;
|
|
/* Get a reference to the parent bridge. */
|
|
get_bridge(context->func.parent);
|
|
mutex_unlock(&acpiphp_context_lock);
|
|
}
|
|
|
|
/* must be added to the list prior to calling register_slot */
|
|
mutex_lock(&bridge_mutex);
|
|
list_add(&bridge->list, &bridge_list);
|
|
mutex_unlock(&bridge_mutex);
|
|
|
|
/* register all slot objects under this bridge */
|
|
status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
|
|
register_slot, NULL, bridge, NULL);
|
|
if (ACPI_FAILURE(status)) {
|
|
acpi_handle_err(handle, "failed to register slots\n");
|
|
cleanup_bridge(bridge);
|
|
put_bridge(bridge);
|
|
}
|
|
}
|
|
|
|
/* Destroy hotplug slots associated with the PCI bus */
|
|
void acpiphp_remove_slots(struct pci_bus *bus)
|
|
{
|
|
struct acpiphp_bridge *bridge, *tmp;
|
|
|
|
if (acpiphp_disabled)
|
|
return;
|
|
|
|
list_for_each_entry_safe(bridge, tmp, &bridge_list, list)
|
|
if (bridge->pci_bus == bus) {
|
|
cleanup_bridge(bridge);
|
|
put_bridge(bridge);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* acpiphp_enable_slot - power on slot
|
|
* @slot: ACPI PHP slot
|
|
*/
|
|
int acpiphp_enable_slot(struct acpiphp_slot *slot)
|
|
{
|
|
int retval = 0;
|
|
|
|
mutex_lock(&slot->crit_sect);
|
|
|
|
/* configure all functions */
|
|
if (!(slot->flags & SLOT_ENABLED))
|
|
retval = enable_device(slot);
|
|
|
|
mutex_unlock(&slot->crit_sect);
|
|
return retval;
|
|
}
|
|
|
|
/**
|
|
* acpiphp_disable_and_eject_slot - power off and eject slot
|
|
* @slot: ACPI PHP slot
|
|
*/
|
|
int acpiphp_disable_and_eject_slot(struct acpiphp_slot *slot)
|
|
{
|
|
struct acpiphp_func *func;
|
|
int retval = 0;
|
|
|
|
mutex_lock(&slot->crit_sect);
|
|
|
|
/* unconfigure all functions */
|
|
retval = disable_device(slot);
|
|
if (retval)
|
|
goto err_exit;
|
|
|
|
list_for_each_entry(func, &slot->funcs, sibling)
|
|
if (func->flags & FUNC_HAS_EJ0) {
|
|
acpi_handle handle = func_to_handle(func);
|
|
|
|
if (ACPI_FAILURE(acpi_evaluate_ej0(handle)))
|
|
acpi_handle_err(handle, "_EJ0 failed\n");
|
|
|
|
break;
|
|
}
|
|
|
|
err_exit:
|
|
mutex_unlock(&slot->crit_sect);
|
|
return retval;
|
|
}
|
|
|
|
|
|
/*
|
|
* slot enabled: 1
|
|
* slot disabled: 0
|
|
*/
|
|
u8 acpiphp_get_power_status(struct acpiphp_slot *slot)
|
|
{
|
|
return (slot->flags & SLOT_ENABLED);
|
|
}
|
|
|
|
|
|
/*
|
|
* latch open: 1
|
|
* latch closed: 0
|
|
*/
|
|
u8 acpiphp_get_latch_status(struct acpiphp_slot *slot)
|
|
{
|
|
unsigned int sta;
|
|
|
|
sta = get_slot_status(slot);
|
|
|
|
return (sta & ACPI_STA_DEVICE_UI) ? 0 : 1;
|
|
}
|
|
|
|
|
|
/*
|
|
* adapter presence : 1
|
|
* absence : 0
|
|
*/
|
|
u8 acpiphp_get_adapter_status(struct acpiphp_slot *slot)
|
|
{
|
|
unsigned int sta;
|
|
|
|
sta = get_slot_status(slot);
|
|
|
|
return (sta == 0) ? 0 : 1;
|
|
}
|