mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 11:36:40 +07:00
4e65331c6b
As suggested by Russell King - ARM Linux <linux@arm.linux.org.uk>, there's no need to keep local prototypes in non-local headers. Add mach-omap1/common.h and mach-omap2/common.h and move the local prototypes there from plat/common.h and mach/omap4-common.h. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
356 lines
7.8 KiB
C
356 lines
7.8 KiB
C
/*
|
|
* linux/arch/arm/mach-omap1/board-perseus2.c
|
|
*
|
|
* Modified from board-generic.c
|
|
*
|
|
* Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
|
|
* Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/input.h>
|
|
#include <linux/smc91x.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <plat/tc.h>
|
|
#include <plat/mux.h>
|
|
#include <plat/fpga.h>
|
|
#include <plat/flash.h>
|
|
#include <plat/keypad.h>
|
|
#include "common.h"
|
|
#include <plat/board.h>
|
|
|
|
static const unsigned int p2_keymap[] = {
|
|
KEY(0, 0, KEY_UP),
|
|
KEY(1, 0, KEY_RIGHT),
|
|
KEY(2, 0, KEY_LEFT),
|
|
KEY(3, 0, KEY_DOWN),
|
|
KEY(4, 0, KEY_ENTER),
|
|
KEY(0, 1, KEY_F10),
|
|
KEY(1, 1, KEY_SEND),
|
|
KEY(2, 1, KEY_END),
|
|
KEY(3, 1, KEY_VOLUMEDOWN),
|
|
KEY(4, 1, KEY_VOLUMEUP),
|
|
KEY(5, 1, KEY_RECORD),
|
|
KEY(0, 2, KEY_F9),
|
|
KEY(1, 2, KEY_3),
|
|
KEY(2, 2, KEY_6),
|
|
KEY(3, 2, KEY_9),
|
|
KEY(4, 2, KEY_KPDOT),
|
|
KEY(0, 3, KEY_BACK),
|
|
KEY(1, 3, KEY_2),
|
|
KEY(2, 3, KEY_5),
|
|
KEY(3, 3, KEY_8),
|
|
KEY(4, 3, KEY_0),
|
|
KEY(5, 3, KEY_KPSLASH),
|
|
KEY(0, 4, KEY_HOME),
|
|
KEY(1, 4, KEY_1),
|
|
KEY(2, 4, KEY_4),
|
|
KEY(3, 4, KEY_7),
|
|
KEY(4, 4, KEY_KPASTERISK),
|
|
KEY(5, 4, KEY_POWER),
|
|
};
|
|
|
|
static struct smc91x_platdata smc91x_info = {
|
|
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
|
|
.leda = RPC_LED_100_10,
|
|
.ledb = RPC_LED_TX_RX,
|
|
};
|
|
|
|
static struct resource smc91x_resources[] = {
|
|
[0] = {
|
|
.start = H2P2_DBG_FPGA_ETHR_START, /* Physical */
|
|
.end = H2P2_DBG_FPGA_ETHR_START + 0xf,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = INT_7XX_MPU_EXT_NIRQ,
|
|
.end = 0,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
|
},
|
|
};
|
|
|
|
static struct mtd_partition nor_partitions[] = {
|
|
/* bootloader (U-Boot, etc) in first sector */
|
|
{
|
|
.name = "bootloader",
|
|
.offset = 0,
|
|
.size = SZ_128K,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
/* bootloader params in the next sector */
|
|
{
|
|
.name = "params",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_128K,
|
|
.mask_flags = 0,
|
|
},
|
|
/* kernel */
|
|
{
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_2M,
|
|
.mask_flags = 0
|
|
},
|
|
/* rest of flash is a file system */
|
|
{
|
|
.name = "rootfs",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
.mask_flags = 0
|
|
},
|
|
};
|
|
|
|
static struct physmap_flash_data nor_data = {
|
|
.width = 2,
|
|
.set_vpp = omap1_set_vpp,
|
|
.parts = nor_partitions,
|
|
.nr_parts = ARRAY_SIZE(nor_partitions),
|
|
};
|
|
|
|
static struct resource nor_resource = {
|
|
.start = OMAP_CS0_PHYS,
|
|
.end = OMAP_CS0_PHYS + SZ_32M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device nor_device = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &nor_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &nor_resource,
|
|
};
|
|
|
|
static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
unsigned long mask;
|
|
|
|
if (cmd == NAND_CMD_NONE)
|
|
return;
|
|
|
|
mask = (ctrl & NAND_CLE) ? 0x02 : 0;
|
|
if (ctrl & NAND_ALE)
|
|
mask |= 0x04;
|
|
writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
|
|
}
|
|
|
|
#define P2_NAND_RB_GPIO_PIN 62
|
|
|
|
static int nand_dev_ready(struct mtd_info *mtd)
|
|
{
|
|
return gpio_get_value(P2_NAND_RB_GPIO_PIN);
|
|
}
|
|
|
|
static const char *part_probes[] = { "cmdlinepart", NULL };
|
|
|
|
static struct platform_nand_data nand_data = {
|
|
.chip = {
|
|
.nr_chips = 1,
|
|
.chip_offset = 0,
|
|
.options = NAND_SAMSUNG_LP_OPTIONS,
|
|
.part_probe_types = part_probes,
|
|
},
|
|
.ctrl = {
|
|
.cmd_ctrl = nand_cmd_ctl,
|
|
.dev_ready = nand_dev_ready,
|
|
},
|
|
};
|
|
|
|
static struct resource nand_resource = {
|
|
.start = OMAP_CS3_PHYS,
|
|
.end = OMAP_CS3_PHYS + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device nand_device = {
|
|
.name = "gen_nand",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &nand_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &nand_resource,
|
|
};
|
|
|
|
static struct platform_device smc91x_device = {
|
|
.name = "smc91x",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &smc91x_info,
|
|
},
|
|
.num_resources = ARRAY_SIZE(smc91x_resources),
|
|
.resource = smc91x_resources,
|
|
};
|
|
|
|
static struct resource kp_resources[] = {
|
|
[0] = {
|
|
.start = INT_7XX_MPUIO_KEYPAD,
|
|
.end = INT_7XX_MPUIO_KEYPAD,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static const struct matrix_keymap_data p2_keymap_data = {
|
|
.keymap = p2_keymap,
|
|
.keymap_size = ARRAY_SIZE(p2_keymap),
|
|
};
|
|
|
|
static struct omap_kp_platform_data kp_data = {
|
|
.rows = 8,
|
|
.cols = 8,
|
|
.keymap_data = &p2_keymap_data,
|
|
.delay = 4,
|
|
.dbounce = true,
|
|
};
|
|
|
|
static struct platform_device kp_device = {
|
|
.name = "omap-keypad",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &kp_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(kp_resources),
|
|
.resource = kp_resources,
|
|
};
|
|
|
|
static struct platform_device lcd_device = {
|
|
.name = "lcd_p2",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct platform_device *devices[] __initdata = {
|
|
&nor_device,
|
|
&nand_device,
|
|
&smc91x_device,
|
|
&kp_device,
|
|
&lcd_device,
|
|
};
|
|
|
|
static struct omap_lcd_config perseus2_lcd_config __initdata = {
|
|
.ctrl_name = "internal",
|
|
};
|
|
|
|
static struct omap_board_config_kernel perseus2_config[] __initdata = {
|
|
{ OMAP_TAG_LCD, &perseus2_lcd_config },
|
|
};
|
|
|
|
static void __init perseus2_init_smc91x(void)
|
|
{
|
|
fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
|
|
mdelay(50);
|
|
fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
|
|
H2P2_DBG_FPGA_LAN_RESET);
|
|
mdelay(50);
|
|
}
|
|
|
|
static void __init omap_perseus2_init(void)
|
|
{
|
|
/* Early, board-dependent init */
|
|
|
|
/*
|
|
* Hold GSM Reset until needed
|
|
*/
|
|
omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
|
|
|
|
/*
|
|
* UARTs -> done automagically by 8250 driver
|
|
*/
|
|
|
|
/*
|
|
* CSx timings, GPIO Mux ... setup
|
|
*/
|
|
|
|
/* Flash: CS0 timings setup */
|
|
omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
|
|
omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
|
|
|
|
/*
|
|
* Ethernet support through the debug board
|
|
* CS1 timings setup
|
|
*/
|
|
omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
|
|
omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
|
|
|
|
/*
|
|
* Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
|
|
* It is used as the Ethernet controller interrupt
|
|
*/
|
|
omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
|
|
OMAP7XX_IO_CONF_9);
|
|
|
|
perseus2_init_smc91x();
|
|
|
|
if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
|
|
BUG();
|
|
gpio_direction_input(P2_NAND_RB_GPIO_PIN);
|
|
|
|
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
|
|
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
|
|
|
|
/* Mux pins for keypad */
|
|
omap_cfg_reg(E2_7XX_KBR0);
|
|
omap_cfg_reg(J7_7XX_KBR1);
|
|
omap_cfg_reg(E1_7XX_KBR2);
|
|
omap_cfg_reg(F3_7XX_KBR3);
|
|
omap_cfg_reg(D2_7XX_KBR4);
|
|
omap_cfg_reg(C2_7XX_KBC0);
|
|
omap_cfg_reg(D3_7XX_KBC1);
|
|
omap_cfg_reg(E4_7XX_KBC2);
|
|
omap_cfg_reg(F4_7XX_KBC3);
|
|
omap_cfg_reg(E3_7XX_KBC4);
|
|
|
|
platform_add_devices(devices, ARRAY_SIZE(devices));
|
|
|
|
omap_board_config = perseus2_config;
|
|
omap_board_config_size = ARRAY_SIZE(perseus2_config);
|
|
omap_serial_init();
|
|
omap_register_i2c_bus(1, 100, NULL, 0);
|
|
}
|
|
|
|
/* Only FPGA needs to be mapped here. All others are done with ioremap */
|
|
static struct map_desc omap_perseus2_io_desc[] __initdata = {
|
|
{
|
|
.virtual = H2P2_DBG_FPGA_BASE,
|
|
.pfn = __phys_to_pfn(H2P2_DBG_FPGA_START),
|
|
.length = H2P2_DBG_FPGA_SIZE,
|
|
.type = MT_DEVICE
|
|
}
|
|
};
|
|
|
|
static void __init omap_perseus2_map_io(void)
|
|
{
|
|
omap7xx_map_io();
|
|
iotable_init(omap_perseus2_io_desc,
|
|
ARRAY_SIZE(omap_perseus2_io_desc));
|
|
}
|
|
|
|
MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
|
|
/* Maintainer: Kevin Hilman <kjh@hilman.org> */
|
|
.atag_offset = 0x100,
|
|
.map_io = omap_perseus2_map_io,
|
|
.init_early = omap1_init_early,
|
|
.reserve = omap_reserve,
|
|
.init_irq = omap1_init_irq,
|
|
.init_machine = omap_perseus2_init,
|
|
.timer = &omap1_timer,
|
|
MACHINE_END
|