linux_dsm_epyc7002/drivers
Greg Kroah-Hartman 4e1d96306d First set of new IIO device support, features and cleanup for the 5.8 cycle
Usual mix of new drivers, new support in old drivers and lots of minor
 cleanup. Yaml conversions also continue to trickle in (plenty more to go!)
 
 New device support
 * ad7476
   - Add ad7091 support (ID only)
 * ad9467
   - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC.
 * adi-axi-adc
   - New driver to support ADIs generic AXI ADC IP core, used to provide
     high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually
     paired with a device using a slow configuration interface (spi etc)
     Includes DT bindings and some fixes for fpga headers.
 * bmg160
   - Add support for BMI088 (ID only)
 * max1241
   - New driver for this ADC.
 * st_sensors
   - Add support for LIS2HH12 accelerometer
 * sx9310
   - New driver supporting sx9310 and sx9311 proximity sensors.
 
 Yaml DT binding conversions
 * rockchip-saradc (including adding some missing parts)
 * stm32-dac
 * tsl2563
 * vcnl4000
 
 Features
 * st_lsm6dsx
   - Add LIS3MDL as a possible sensor hub device.
 * vcnl4000
   - Add new concept of near level (from DT) to provide to userspace which
     often needs to have some calibrated concept of 'near'.
 
 Cleanups, minor fixes etc.
 * core
   - Use snprintf for functions where strings are built and there is
     potential for overflow.
   - Correct docs to indicate mlock should not be used directly by drivers.
   - Fix up accidental dropping of a patch to use bitmap_zalloc.
   - Stop allowing enabling of buffers with no channels enabled.
   - Drop unused 'stufftoread' from iio_buffer.
   - Drop scan_el_attrs form iio_buffer as unused.
   - Reorder sanity checks in __iio_device_register to fail earlier.
   - Drop all the devm_ runregister / free functions from IIO as they
     were never used and encourage poor design.
 * dma-buffer
   - Tidy up includes.
 * dma-engine-buffer
   - Provide dev-managed allocator.
   - Fix an issue with printing a size_t
 * cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150)
   - Replace some unnecessary casts of error ptrs and whilst there.
     use the %pe printf parameter to print them in a more useful fashion.
 * cross subsystem
   - Drop casts in calls to regmap_bulk_read as they make no sense.
   - Use devm_platform_ioremap_resource to reduce boilerplate.
   - Fix typos in Analog Devices.
 * counters/104-quad
   - Add Syed Nayyar Waris as an additional maintainer.
 * ad7476
   - Generate CONVST signal internally rather than requiring external
     trigger.  Add sysfs read back as can now do so.
   - use devm_add_action_or_reset to tidy up error and remove handling.
 * ad7793
   - Switch to read_avail from explicit attribute. Mostly done to avoid
     confusing people with a - sign (without surounding spaces) that
     was correct but checkpatch didn't like.
 * adis library
   - Add missing newlines at end of error messages.
 * adis16400
   - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
 * adis16460
   - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
 * ad_sigma_delta
   - Move some channel definitions into individual drivers to avoid
     having to deal with complex options.
 * ak8974
   - Silence an error on deffered probe.
 * bmp280
   - Harden against IRQ before registration.
   - Convert to read_avail instead of opencoding the equivalent.
   - Explicitly mark GPIO as optional.
   - Cleanup casts.
   - Remove line breaks from strings.
 * htts221
   - Replace direct access to platform_data with dev_get_platdata().
   - Use device properties rather than device tree ones to allow ACPI
     probing.
   - Casting cleanups.
 * intel_mrfld_adc
   - Don't use unaligned accessor for aligned data.
 * isl29125
   - Reorder buer pre and post hooks to allow for coming core rework.
 * ltc2983
   - Remove comp to bool.
 * max1363
   - Stop using mlock from the iio_dev directly in favour of a local lock
     with clearly defined scope.
 * max30100
   - Use generic device properties to allow ACPI probe.
 * mpu6050
   - Convert to i2c_new_client_device.
   - Add debugfs register access.
 * st_lsm6dsx
   - Provide means of configuring full scale on slave device if supported.
   - Drop include of st_sensors header to get one value. Its not otherwise
     used by this driver.
 * st-sensors
   - Replace direct access to platform_data with dev_get_platdata().
   - Casting cleanups.
   - Avoid splitting strings.
 * st_uvis25
   - Casting cleanups.
 * tsl2563
   - Typo fix.
 * tsl2772
   - scnprintf in a non obvious string building usecase. Note also 'fixes'
     a wrong calculation of remaining space that couldn't actually cause
     any trouble as there was lots of room.
 * xilinx-xadc
   - Fix Lars-Peter spelling his own name wrong :) + additional typos.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl6gicARHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foj3ig//XRAAHRSfzXFpvYxITVKDIGwP/giYdp91
 OflGw/0aOZFExr72ENLmCArXZPOT2qAZyNNoDNvuJ9SkcVDf4bT3w9gYwWtJ1sd7
 Hhh+1JpPspSo6vS85FMjm37UDfSbmYqB6wC57cZ5pKQIiJwi6W2hGsyOoOXmfLLc
 57d3mlg4g3KLl9Hl4UTU84gE1ushKQgNxVH21Y71pOTa8p+xbWWcspWjR2Jf+kVZ
 qPr2+2rP/AjeAVLu9SKfdBiczYQCNR3uFWKkOKsBE9fq3sbcN6NT5DktrSJUH+qU
 zfUGmShCEP908/9fARazXQZcTOX1tIUOnrpHG9l54GNPh3S2Qk9xGaZxvQy5sguC
 AmC4p+MaIMrMcgWMk9po+nE5INJq7HBV/0jnADG307wEhFrKrjh/2PtP4f9k/Mcv
 sHB7K1+dcJAUwFb5gccdDBfmKMnwfnGS8OFGLXZZKBIDqSvptmIs/pmavjEPgqhV
 GwGTDPyZKeyDnyhTXGafxii03Q2I62Zte5l4jcZ+q8Q4UMxQovEkX6IvUpXwA0Kk
 eoxedbgdvzxrDNiNrXa0k6CLzqSQW+aVHgJG+HEig4IXQse8zXb11HCs35zq5r4j
 JI2UjLk3zUHLiNR/Ir9fKAbPwWSWv3IWkfmFEEUWvUFjM+Xot1Hg+61vBTFKo4iK
 EIqqPZmd5Mk=
 =DyTF
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new IIO device support, features and cleanup for the 5.8 cycle

Usual mix of new drivers, new support in old drivers and lots of minor
cleanup. Yaml conversions also continue to trickle in (plenty more to go!)

New device support
* ad7476
  - Add ad7091 support (ID only)
* ad9467
  - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC.
* adi-axi-adc
  - New driver to support ADIs generic AXI ADC IP core, used to provide
    high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually
    paired with a device using a slow configuration interface (spi etc)
    Includes DT bindings and some fixes for fpga headers.
* bmg160
  - Add support for BMI088 (ID only)
* max1241
  - New driver for this ADC.
* st_sensors
  - Add support for LIS2HH12 accelerometer
* sx9310
  - New driver supporting sx9310 and sx9311 proximity sensors.

Yaml DT binding conversions
* rockchip-saradc (including adding some missing parts)
* stm32-dac
* tsl2563
* vcnl4000

Features
* st_lsm6dsx
  - Add LIS3MDL as a possible sensor hub device.
* vcnl4000
  - Add new concept of near level (from DT) to provide to userspace which
    often needs to have some calibrated concept of 'near'.

Cleanups, minor fixes etc.
* core
  - Use snprintf for functions where strings are built and there is
    potential for overflow.
  - Correct docs to indicate mlock should not be used directly by drivers.
  - Fix up accidental dropping of a patch to use bitmap_zalloc.
  - Stop allowing enabling of buffers with no channels enabled.
  - Drop unused 'stufftoread' from iio_buffer.
  - Drop scan_el_attrs form iio_buffer as unused.
  - Reorder sanity checks in __iio_device_register to fail earlier.
  - Drop all the devm_ runregister / free functions from IIO as they
    were never used and encourage poor design.
* dma-buffer
  - Tidy up includes.
* dma-engine-buffer
  - Provide dev-managed allocator.
  - Fix an issue with printing a size_t
* cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150)
  - Replace some unnecessary casts of error ptrs and whilst there.
    use the %pe printf parameter to print them in a more useful fashion.
* cross subsystem
  - Drop casts in calls to regmap_bulk_read as they make no sense.
  - Use devm_platform_ioremap_resource to reduce boilerplate.
  - Fix typos in Analog Devices.
* counters/104-quad
  - Add Syed Nayyar Waris as an additional maintainer.
* ad7476
  - Generate CONVST signal internally rather than requiring external
    trigger.  Add sysfs read back as can now do so.
  - use devm_add_action_or_reset to tidy up error and remove handling.
* ad7793
  - Switch to read_avail from explicit attribute. Mostly done to avoid
    confusing people with a - sign (without surounding spaces) that
    was correct but checkpatch didn't like.
* adis library
  - Add missing newlines at end of error messages.
* adis16400
  - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* adis16460
  - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* ad_sigma_delta
  - Move some channel definitions into individual drivers to avoid
    having to deal with complex options.
* ak8974
  - Silence an error on deffered probe.
* bmp280
  - Harden against IRQ before registration.
  - Convert to read_avail instead of opencoding the equivalent.
  - Explicitly mark GPIO as optional.
  - Cleanup casts.
  - Remove line breaks from strings.
* htts221
  - Replace direct access to platform_data with dev_get_platdata().
  - Use device properties rather than device tree ones to allow ACPI
    probing.
  - Casting cleanups.
* intel_mrfld_adc
  - Don't use unaligned accessor for aligned data.
* isl29125
  - Reorder buer pre and post hooks to allow for coming core rework.
* ltc2983
  - Remove comp to bool.
* max1363
  - Stop using mlock from the iio_dev directly in favour of a local lock
    with clearly defined scope.
* max30100
  - Use generic device properties to allow ACPI probe.
* mpu6050
  - Convert to i2c_new_client_device.
  - Add debugfs register access.
* st_lsm6dsx
  - Provide means of configuring full scale on slave device if supported.
  - Drop include of st_sensors header to get one value. Its not otherwise
    used by this driver.
* st-sensors
  - Replace direct access to platform_data with dev_get_platdata().
  - Casting cleanups.
  - Avoid splitting strings.
* st_uvis25
  - Casting cleanups.
* tsl2563
  - Typo fix.
* tsl2772
  - scnprintf in a non obvious string building usecase. Note also 'fixes'
    a wrong calculation of remaining space that couldn't actually cause
    any trouble as there was lots of room.
* xilinx-xadc
  - Fix Lars-Peter spelling his own name wrong :) + additional typos.

* tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (101 commits)
  iio: magnetometer: ak8974: Silence deferred-probe error
  Documentation: ABI: document IIO in_proximity_nearlevel file
  iio: vcnl4000: Export near level property for proximity sensor
  dt-bindings: iio: light: vcnl4000: Add proximity-near-level
  dt-bindings: iio: Introduce common properties for iio sensors
  dt-bindings: iio: vcnl4000: convert bindings to YAML format
  iio: Fix misspellings of "Analog Devices"
  iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions
  iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource
  iio: adc: at91-adc: Use devm_platform_ioremap_resource
  iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource
  iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read
  iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk*
  iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions.
  iio:chemical:bme680: Tidy up parameters to regmap_bulk_read
  iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls
  iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls
  iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver
  iio: buffer: drop devm_iio_kfifo_free() API call
  iio: buffer: drop devm_iio_hw_consumer_free() API call
  ...
2020-04-23 11:06:48 +02:00
..
accessibility
acpi More ACPI updates for 5.7-rc1 2020-04-10 09:52:15 -07:00
amba Revert "amba: Initialize dma_parms for amba devices" 2020-04-01 08:03:28 +02:00
android
ata ahci: Add Intel Comet Lake PCH RAID PCI ID 2020-04-09 09:31:38 -06:00
atm
auxdisplay
base mm/memory_hotplug: allow to specify a default online_type 2020-04-07 10:43:41 -07:00
bcma
block xen: branch for v5.7-rc1b 2020-04-10 17:20:06 -07:00
bluetooth
bus ARM: driver updates 2020-04-03 15:05:35 -07:00
cdrom
char Merge branch 'akpm' (patches from Andrew) 2020-04-10 17:57:48 -07:00
clk There's not much to see in the core framework this time around. Instead the 2020-04-05 10:43:32 -07:00
clocksource clocksource/drivers/timer-vf-pit: Add missing parenthesis 2020-04-05 09:24:58 +02:00
connector
counter
cpufreq Additional power management updates for 5.7-rc1 2020-04-06 10:14:39 -07:00
cpuidle Merge branch 'pm-cpuidle' 2020-04-10 11:32:22 +02:00
crypto Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 2020-04-08 21:35:29 -07:00
dax dax: Move mandatory ->zero_page_range() check in alloc_dax() 2020-04-02 19:15:03 -07:00
dca
devfreq
dio
dma drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings 2020-04-10 15:36:22 -07:00
dma-buf A bunch of fixes to avoid null pointer dereference in fbcon, fix a return 2020-04-08 09:14:34 +10:00
edac Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2020-03-30 16:40:08 -07:00
eisa
extcon Char/Misc driver patches for 5.7-rc1 2020-04-03 13:22:40 -07:00
firewire
firmware sound fixes for 5.7-rc1 2020-04-10 12:27:06 -07:00
fpga
fsi
gnss
gpio This is the bulk of GPIO development for the v5.7 kernel cycle. 2020-04-04 10:27:00 -07:00
gpu Kbuild updates for v5.7 (2nd) 2020-04-11 09:46:12 -07:00
greybus
hid Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid 2020-04-01 15:18:42 -07:00
hsi
hv hv_balloon: don't check for memhp_auto_online manually 2020-04-07 10:43:40 -07:00
hwmon change email address for Pali Rohár 2020-04-10 15:36:22 -07:00
hwspinlock
hwtracing
i2c Merge branch 'i2c/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux 2020-04-02 15:54:13 -07:00
i3c
ide drivers/ide: Fix build regression. 2020-04-04 18:07:59 -07:00
idle Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2020-03-30 16:40:08 -07:00
iio First set of new IIO device support, features and cleanup for the 5.8 cycle 2020-04-23 11:06:48 +02:00
infiniband RDMA 5.7 pull request 2020-04-01 18:18:18 -07:00
input Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2020-04-07 20:20:12 -07:00
interconnect
iommu
ipack
irqchip Two reverts addressing regressions of the Xilinx interrupt controller 2020-04-05 11:57:12 -07:00
isdn
leds leds: core: Fix warning message when init_data 2020-04-06 23:12:08 +02:00
lightnvm
macintosh Char/Misc driver patches for 5.7-rc1 2020-04-03 13:22:40 -07:00
mailbox
mcb
md libnvdimm for 5.7 2020-04-08 21:03:40 -07:00
media
memory ARM: driver updates 2020-04-03 15:05:35 -07:00
memstick
message
mfd
misc virtio: fixes, vdpa 2020-04-08 10:51:53 -07:00
mmc MMC core: 2020-03-31 16:13:09 -07:00
most
mtd This pull request contains fixes for UBI and UBIFS: 2020-04-07 12:40:56 -07:00
mux
net virtio: fixes, vdpa 2020-04-08 10:51:53 -07:00
nfc
ntb pci-v5.7-changes 2020-04-03 14:25:02 -07:00
nubus
nvdimm libnvdimm for 5.7 2020-04-08 21:03:40 -07:00
nvme block-5.7-2020-04-10 2020-04-10 10:06:54 -07:00
nvmem
of Devicetree updates for v5.7: 2020-04-02 17:32:52 -07:00
opp
oprofile
parisc parisc: Replace setup_irq() by request_irq() 2020-04-05 22:05:23 +02:00
parport
pci IOMMU Updates for Linux v5.7 2020-04-08 11:00:00 -07:00
pcmcia pcmcia: remove some unused space characters 2020-03-31 18:48:22 +02:00
perf arm64 updates for 5.7: 2020-03-31 10:05:01 -07:00
phy pci-v5.7-changes 2020-04-03 14:25:02 -07:00
pinctrl This is the bulk of GPIO development for the v5.7 kernel cycle. 2020-04-04 10:27:00 -07:00
platform change email address for Pali Rohár 2020-04-10 15:36:22 -07:00
pnp
power change email address for Pali Rohár 2020-04-10 15:36:22 -07:00
powercap Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2020-03-30 16:40:08 -07:00
pps
ps3 powerpc/ps3: Remove an unneeded NULL check 2020-04-03 00:09:59 +11:00
ptp
pwm pwm: pca9685: Fix PWM/GPIO inter-operation 2020-04-03 21:41:42 +02:00
rapidio
ras
regulator
remoteproc remoteproc/omap: Fix set_load call in omap_rproc_request_timer 2020-04-03 10:47:21 -07:00
reset
rpmsg
rtc - New Drivers 2020-04-07 19:48:52 -07:00
s390 SCSI misc on 20200410 2020-04-10 12:21:11 -07:00
sbus
scsi SCSI misc on 20200410 2020-04-10 12:21:11 -07:00
sfi
sh
siox
slimbus
soc RISC-V Patches for the 5.7 Merge Window, Part 1 2020-04-09 10:51:30 -07:00
soundwire Char/Misc driver patches for 5.7-rc1 2020-04-03 13:22:40 -07:00
spi sound updates for 5.7-rc1 2020-04-02 15:50:04 -07:00
spmi
ssb
staging First set of new IIO device support, features and cleanup for the 5.8 cycle 2020-04-23 11:06:48 +02:00
target SCSI misc on 20200410 2020-04-10 12:21:11 -07:00
tc
tee ARM: driver updates 2020-04-03 15:05:35 -07:00
thermal - Convert tsens configuration DT binding to yaml (Rajeshwari) 2020-04-07 20:00:16 -07:00
thunderbolt
tty powerpc updates for 5.7 2020-04-05 11:12:59 -07:00
uio
usb SCSI misc on 20200402 2020-04-02 17:03:53 -07:00
vdpa vdpa: move to drivers/vdpa 2020-04-02 10:41:40 -04:00
vfio vfio: Ignore -ENODEV when getting MSI cookie 2020-04-01 13:51:51 -06:00
vhost vhost: introduce vDPA-based backend 2020-04-02 10:41:40 -04:00
video drm fixes for 5.7-rc1 2020-04-07 20:24:34 -07:00
virt
virtio virtio: fixes, vdpa 2020-04-08 10:51:53 -07:00
visorbus
vlynq
vme
w1
watchdog watchdog: Add K3 RTI watchdog support 2020-04-01 11:35:23 +02:00
xen xen: branch for v5.7-rc1b 2020-04-10 17:20:06 -07:00
zorro SPDX patches for 5.7-rc1. 2020-04-03 13:12:26 -07:00
Kconfig virtio: fixes, vdpa 2020-04-08 10:51:53 -07:00
Makefile virtio: fixes, vdpa 2020-04-08 10:51:53 -07:00