AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-14 09:16:40 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
4dc3530df7
linux_dsm_epyc7002/drivers/net/wan/lmc/lmc_var.h
Krzysztof Hałasa 867240f7b2 WAN: Use u32 type instead of u_int32_t in LMC driver. 
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-07-23 23:05:56 +02:00

471 lines
15 KiB
C
Raw Blame History

#ifndef _LMC_VAR_H_
#define _LMC_VAR_H_
/*
* Copyright (c) 1997-2000 LAN Media Corporation (LMC)
* All rights reserved. www.lanmedia.com
*
* This code is written by:
* Andrew Stanley-Jones (asj@cban.com)
* Rob Braun (bbraun@vix.com),
* Michael Graff (explorer@vix.com) and
* Matt Thomas (matt@3am-software.com).
*
* This software may be used and distributed according to the terms
* of the GNU General Public License version 2, incorporated herein by reference.
*/
#include <linux/timer.h>
/*
* basic definitions used in lmc include files
*/
typedef struct lmc___softc lmc_softc_t;
typedef struct lmc___media lmc_media_t;
typedef struct lmc___ctl lmc_ctl_t;
#define lmc_csrptr_t unsigned long
#define LMC_REG_RANGE 0x80
#define LMC_PRINTF_FMT "%s"
#define LMC_PRINTF_ARGS (sc->lmc_device->name)
#define TX_TIMEOUT (2*HZ)
#define LMC_TXDESCS 32
#define LMC_RXDESCS 32
#define LMC_LINK_UP 1
#define LMC_LINK_DOWN 0
/* These macros for generic read and write to and from the dec chip */
#define LMC_CSR_READ(sc, csr) \
inl((sc)->lmc_csrs.csr)
#define LMC_CSR_WRITE(sc, reg, val) \
outl((val), (sc)->lmc_csrs.reg)
//#ifdef _LINUX_DELAY_H
// #define SLOW_DOWN_IO udelay(2);
// #undef __SLOW_DOWN_IO
// #define __SLOW_DOWN_IO udelay(2);
//#endif
#define DELAY(n) SLOW_DOWN_IO
#define lmc_delay() inl(sc->lmc_csrs.csr_9)
/* This macro sync's up with the mii so that reads and writes can take place */
#define LMC_MII_SYNC(sc) do {int n=32; while( n >= 0 ) { \
LMC_CSR_WRITE((sc), csr_9, 0x20000); \
lmc_delay(); \
LMC_CSR_WRITE((sc), csr_9, 0x30000); \
lmc_delay(); \
n--; }} while(0)
struct lmc_regfile_t {
lmc_csrptr_t csr_busmode; /* CSR0 */
lmc_csrptr_t csr_txpoll; /* CSR1 */
lmc_csrptr_t csr_rxpoll; /* CSR2 */
lmc_csrptr_t csr_rxlist; /* CSR3 */
lmc_csrptr_t csr_txlist; /* CSR4 */
lmc_csrptr_t csr_status; /* CSR5 */
lmc_csrptr_t csr_command; /* CSR6 */
lmc_csrptr_t csr_intr; /* CSR7 */
lmc_csrptr_t csr_missed_frames; /* CSR8 */
lmc_csrptr_t csr_9; /* CSR9 */
lmc_csrptr_t csr_10; /* CSR10 */
lmc_csrptr_t csr_11; /* CSR11 */
lmc_csrptr_t csr_12; /* CSR12 */
lmc_csrptr_t csr_13; /* CSR13 */
lmc_csrptr_t csr_14; /* CSR14 */
lmc_csrptr_t csr_15; /* CSR15 */
};
#define csr_enetrom csr_9 /* 21040 */
#define csr_reserved csr_10 /* 21040 */
#define csr_full_duplex csr_11 /* 21040 */
#define csr_bootrom csr_10 /* 21041/21140A/?? */
#define csr_gp csr_12 /* 21140* */
#define csr_watchdog csr_15 /* 21140* */
#define csr_gp_timer csr_11 /* 21041/21140* */
#define csr_srom_mii csr_9 /* 21041/21140* */
#define csr_sia_status csr_12 /* 2104x */
#define csr_sia_connectivity csr_13 /* 2104x */
#define csr_sia_tx_rx csr_14 /* 2104x */
#define csr_sia_general csr_15 /* 2104x */
/* tulip length/control transmit descriptor definitions
* used to define bits in the second tulip_desc_t field (length)
* for the transmit descriptor -baz */
#define LMC_TDES_FIRST_BUFFER_SIZE ((u32)(0x000007FF))
#define LMC_TDES_SECOND_BUFFER_SIZE ((u32)(0x003FF800))
#define LMC_TDES_HASH_FILTERING ((u32)(0x00400000))
#define LMC_TDES_DISABLE_PADDING ((u32)(0x00800000))
#define LMC_TDES_SECOND_ADDR_CHAINED ((u32)(0x01000000))
#define LMC_TDES_END_OF_RING ((u32)(0x02000000))
#define LMC_TDES_ADD_CRC_DISABLE ((u32)(0x04000000))
#define LMC_TDES_SETUP_PACKET ((u32)(0x08000000))
#define LMC_TDES_INVERSE_FILTERING ((u32)(0x10000000))
#define LMC_TDES_FIRST_SEGMENT ((u32)(0x20000000))
#define LMC_TDES_LAST_SEGMENT ((u32)(0x40000000))
#define LMC_TDES_INTERRUPT_ON_COMPLETION ((u32)(0x80000000))
#define TDES_SECOND_BUFFER_SIZE_BIT_NUMBER 11
#define TDES_COLLISION_COUNT_BIT_NUMBER 3
/* Constants for the RCV descriptor RDES */
#define LMC_RDES_OVERFLOW ((u32)(0x00000001))
#define LMC_RDES_CRC_ERROR ((u32)(0x00000002))
#define LMC_RDES_DRIBBLING_BIT ((u32)(0x00000004))
#define LMC_RDES_REPORT_ON_MII_ERR ((u32)(0x00000008))
#define LMC_RDES_RCV_WATCHDOG_TIMEOUT ((u32)(0x00000010))
#define LMC_RDES_FRAME_TYPE ((u32)(0x00000020))
#define LMC_RDES_COLLISION_SEEN ((u32)(0x00000040))
#define LMC_RDES_FRAME_TOO_LONG ((u32)(0x00000080))
#define LMC_RDES_LAST_DESCRIPTOR ((u32)(0x00000100))
#define LMC_RDES_FIRST_DESCRIPTOR ((u32)(0x00000200))
#define LMC_RDES_MULTICAST_FRAME ((u32)(0x00000400))
#define LMC_RDES_RUNT_FRAME ((u32)(0x00000800))
#define LMC_RDES_DATA_TYPE ((u32)(0x00003000))
#define LMC_RDES_LENGTH_ERROR ((u32)(0x00004000))
#define LMC_RDES_ERROR_SUMMARY ((u32)(0x00008000))
#define LMC_RDES_FRAME_LENGTH ((u32)(0x3FFF0000))
#define LMC_RDES_OWN_BIT ((u32)(0x80000000))
#define RDES_FRAME_LENGTH_BIT_NUMBER 16
#define LMC_RDES_ERROR_MASK ( (u32)( \
LMC_RDES_OVERFLOW \
| LMC_RDES_DRIBBLING_BIT \
| LMC_RDES_REPORT_ON_MII_ERR \
| LMC_RDES_COLLISION_SEEN ) )
/*
* Ioctl info
*/
typedef struct {
u32 n;
u32 m;
u32 v;
u32 x;
u32 r;
u32 f;
u32 exact;
} lmc_av9110_t;
/*
* Common structure passed to the ioctl code.
*/
struct lmc___ctl {
u32 cardtype;
u32 clock_source; /* HSSI, T1 */
u32 clock_rate; /* T1 */
u32 crc_length;
u32 cable_length; /* DS3 */
u32 scrambler_onoff; /* DS3 */
u32 cable_type; /* T1 */
u32 keepalive_onoff; /* protocol */
u32 ticks; /* ticks/sec */
union {
lmc_av9110_t ssi;
} cardspec;
u32 circuit_type; /* T1 or E1 */
};
/*
* Carefull, look at the data sheet, there's more to this
* structure than meets the eye. It should probably be:
*
* struct tulip_desc_t {
* u8 own:1;
* u32 status:31;
* u32 control:10;
* u32 buffer1;
* u32 buffer2;
* };
* You could also expand status control to provide more bit information
*/
struct tulip_desc_t {
s32 status;
s32 length;
u32 buffer1;
u32 buffer2;
};
/*
* media independent methods to check on media status, link, light LEDs,
* etc.
*/
struct lmc___media {
void (* init)(lmc_softc_t * const);
void (* defaults)(lmc_softc_t * const);
void (* set_status)(lmc_softc_t * const, lmc_ctl_t *);
void (* set_clock_source)(lmc_softc_t * const, int);
void (* set_speed)(lmc_softc_t * const, lmc_ctl_t *);
void (* set_cable_length)(lmc_softc_t * const, int);
void (* set_scrambler)(lmc_softc_t * const, int);
int (* get_link_status)(lmc_softc_t * const);
void (* set_link_status)(lmc_softc_t * const, int);
void (* set_crc_length)(lmc_softc_t * const, int);
void (* set_circuit_type)(lmc_softc_t * const, int);
void (* watchdog)(lmc_softc_t * const);
};
#define STATCHECK 0xBEEFCAFE
struct lmc_extra_statistics
{
u32 version_size;
u32 lmc_cardtype;
u32 tx_ProcTimeout;
u32 tx_IntTimeout;
u32 tx_NoCompleteCnt;
u32 tx_MaxXmtsB4Int;
u32 tx_TimeoutCnt;
u32 tx_OutOfSyncPtr;
u32 tx_tbusy0;
u32 tx_tbusy1;
u32 tx_tbusy_calls;
u32 resetCount;
u32 lmc_txfull;
u32 tbusy;
u32 dirtyTx;
u32 lmc_next_tx;
u32 otherTypeCnt;
u32 lastType;
u32 lastTypeOK;
u32 txLoopCnt;
u32 usedXmtDescripCnt;
u32 txIndexCnt;
u32 rxIntLoopCnt;
u32 rx_SmallPktCnt;
u32 rx_BadPktSurgeCnt;
u32 rx_BuffAllocErr;
u32 tx_lossOfClockCnt;
/* T1 error counters */
u32 framingBitErrorCount;
u32 lineCodeViolationCount;
u32 lossOfFrameCount;
u32 changeOfFrameAlignmentCount;
u32 severelyErroredFrameCount;
u32 check;
};
typedef struct lmc_xinfo {
u32 Magic0; /* BEEFCAFE */
u32 PciCardType;
u32 PciSlotNumber; /* PCI slot number */
u16 DriverMajorVersion;
u16 DriverMinorVersion;
u16 DriverSubVersion;
u16 XilinxRevisionNumber;
u16 MaxFrameSize;
u16 t1_alarm1_status;
u16 t1_alarm2_status;
int link_status;
u32 mii_reg16;
u32 Magic1; /* DEADBEEF */
} LMC_XINFO;
/*
* forward decl
*/
struct lmc___softc {
char *name;
u8 board_idx;
struct lmc_extra_statistics extra_stats;
struct net_device *lmc_device;
int hang, rxdesc, bad_packet, some_counter;
u32 txgo;
struct lmc_regfile_t lmc_csrs;
volatile u32 lmc_txtick;
volatile u32 lmc_rxtick;
u32 lmc_flags;
u32 lmc_intrmask; /* our copy of csr_intr */
u32 lmc_cmdmode; /* our copy of csr_cmdmode */
u32 lmc_busmode; /* our copy of csr_busmode */
u32 lmc_gpio_io; /* state of in/out settings */
u32 lmc_gpio; /* state of outputs */
struct sk_buff* lmc_txq[LMC_TXDESCS];
struct sk_buff* lmc_rxq[LMC_RXDESCS];
volatile
struct tulip_desc_t lmc_rxring[LMC_RXDESCS];
volatile
struct tulip_desc_t lmc_txring[LMC_TXDESCS];
unsigned int lmc_next_rx, lmc_next_tx;
volatile
unsigned int lmc_taint_tx, lmc_taint_rx;
int lmc_tx_start, lmc_txfull;
int lmc_txbusy;
u16 lmc_miireg16;
int lmc_ok;
int last_link_status;
int lmc_cardtype;
u32 last_frameerr;
lmc_media_t *lmc_media;
struct timer_list timer;
lmc_ctl_t ictl;
u32 TxDescriptControlInit;
int tx_TimeoutInd; /* additional driver state */
int tx_TimeoutDisplay;
unsigned int lastlmc_taint_tx;
int lasttx_packets;
u32 tx_clockState;
u32 lmc_crcSize;
LMC_XINFO lmc_xinfo;
char lmc_yel, lmc_blue, lmc_red; /* for T1 and DS3 */
char lmc_timing; /* for HSSI and SSI */
int got_irq;
char last_led_err[4];
u32 last_int;
u32 num_int;
spinlock_t lmc_lock;
u16 if_type; /* HDLC/PPP or NET */
/* Failure cases */
u8 failed_ring;
u8 failed_recv_alloc;
/* Structure check */
u32 check;
};
#define LMC_PCI_TIME 1
#define LMC_EXT_TIME 0
#define PKT_BUF_SZ 1542 /* was 1536 */
/* CSR5 settings */
#define TIMER_INT 0x00000800
#define TP_LINK_FAIL 0x00001000
#define TP_LINK_PASS 0x00000010
#define NORMAL_INT 0x00010000
#define ABNORMAL_INT 0x00008000
#define RX_JABBER_INT 0x00000200
#define RX_DIED 0x00000100
#define RX_NOBUFF 0x00000080
#define RX_INT 0x00000040
#define TX_FIFO_UNDER 0x00000020
#define TX_JABBER 0x00000008
#define TX_NOBUFF 0x00000004
#define TX_DIED 0x00000002
#define TX_INT 0x00000001
/* CSR6 settings */
#define OPERATION_MODE 0x00000200 /* Full Duplex */
#define PROMISC_MODE 0x00000040 /* Promiscuous Mode */
#define RECIEVE_ALL 0x40000000 /* Recieve All */
#define PASS_BAD_FRAMES 0x00000008 /* Pass Bad Frames */
/* Dec control registers CSR6 as well */
#define LMC_DEC_ST 0x00002000
#define LMC_DEC_SR 0x00000002
/* CSR15 settings */
#define RECV_WATCHDOG_DISABLE 0x00000010
#define JABBER_DISABLE 0x00000001
/* More settings */
/*
* aSR6 -- Command (Operation Mode) Register
*/
#define TULIP_CMD_RECEIVEALL 0x40000000L /* (RW) Receivel all frames? */
#define TULIP_CMD_MUSTBEONE 0x02000000L /* (RW) Must Be One (21140) */
#define TULIP_CMD_TXTHRSHLDCTL 0x00400000L /* (RW) Transmit Threshold Mode (21140) */
#define TULIP_CMD_STOREFWD 0x00200000L /* (RW) Store and Foward (21140) */
#define TULIP_CMD_NOHEARTBEAT 0x00080000L /* (RW) No Heartbeat (21140) */
#define TULIP_CMD_PORTSELECT 0x00040000L /* (RW) Post Select (100Mb) (21140) */
#define TULIP_CMD_FULLDUPLEX 0x00000200L /* (RW) Full Duplex Mode */
#define TULIP_CMD_OPERMODE 0x00000C00L /* (RW) Operating Mode */
#define TULIP_CMD_PROMISCUOUS 0x00000041L /* (RW) Promiscuous Mode */
#define TULIP_CMD_PASSBADPKT 0x00000008L /* (RW) Pass Bad Frames */
#define TULIP_CMD_THRESHOLDCTL 0x0000C000L /* (RW) Threshold Control */
#define TULIP_GP_PINSET 0x00000100L
#define TULIP_BUSMODE_SWRESET 0x00000001L
#define TULIP_WATCHDOG_TXDISABLE 0x00000001L
#define TULIP_WATCHDOG_RXDISABLE 0x00000010L
#define TULIP_STS_NORMALINTR 0x00010000L /* (RW) Normal Interrupt */
#define TULIP_STS_ABNRMLINTR 0x00008000L /* (RW) Abnormal Interrupt */
#define TULIP_STS_ERI 0x00004000L /* (RW) Early Receive Interrupt */
#define TULIP_STS_SYSERROR 0x00002000L /* (RW) System Error */
#define TULIP_STS_GTE 0x00000800L /* (RW) General Pupose Timer Exp */
#define TULIP_STS_ETI 0x00000400L /* (RW) Early Transmit Interrupt */
#define TULIP_STS_RXWT 0x00000200L /* (RW) Receiver Watchdog Timeout */
#define TULIP_STS_RXSTOPPED 0x00000100L /* (RW) Receiver Process Stopped */
#define TULIP_STS_RXNOBUF 0x00000080L /* (RW) Receive Buf Unavail */
#define TULIP_STS_RXINTR 0x00000040L /* (RW) Receive Interrupt */
#define TULIP_STS_TXUNDERFLOW 0x00000020L /* (RW) Transmit Underflow */
#define TULIP_STS_TXJABER 0x00000008L /* (RW) Jabber timeout */
#define TULIP_STS_TXNOBUF 0x00000004L
#define TULIP_STS_TXSTOPPED 0x00000002L /* (RW) Transmit Process Stopped */
#define TULIP_STS_TXINTR 0x00000001L /* (RW) Transmit Interrupt */
#define TULIP_STS_RXS_STOPPED 0x00000000L /* 000 - Stopped */
#define TULIP_STS_RXSTOPPED 0x00000100L /* (RW) Receive Process Stopped */
#define TULIP_STS_RXNOBUF 0x00000080L
#define TULIP_CMD_TXRUN 0x00002000L /* (RW) Start/Stop Transmitter */
#define TULIP_CMD_RXRUN 0x00000002L /* (RW) Start/Stop Receive Filtering */
#define TULIP_DSTS_TxDEFERRED 0x00000001 /* Initially Deferred */
#define TULIP_DSTS_OWNER 0x80000000 /* Owner (1 = 21040) */
#define TULIP_DSTS_RxMIIERR 0x00000008
#define LMC_DSTS_ERRSUM (TULIP_DSTS_RxMIIERR)
#define TULIP_DEFAULT_INTR_MASK (TULIP_STS_NORMALINTR \
| TULIP_STS_RXINTR \
| TULIP_STS_TXINTR \
| TULIP_STS_ABNRMLINTR \
| TULIP_STS_SYSERROR \
| TULIP_STS_TXSTOPPED \
| TULIP_STS_TXUNDERFLOW\
| TULIP_STS_RXSTOPPED )
#define DESC_OWNED_BY_SYSTEM ((u32)(0x00000000))
#define DESC_OWNED_BY_DC21X4 ((u32)(0x80000000))
#ifndef TULIP_CMD_RECEIVEALL
#define TULIP_CMD_RECEIVEALL 0x40000000L
#endif
/* Adapter module number */
#define LMC_ADAP_HSSI 2
#define LMC_ADAP_DS3 3
#define LMC_ADAP_SSI 4
#define LMC_ADAP_T1 5
#define LMC_MTU 1500
#define LMC_CRC_LEN_16 2 /* 16-bit CRC */
#define LMC_CRC_LEN_32 4
#endif /* _LMC_VAR_H_ */
Reference in New Issue View Git Blame Copy Permalink