mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 07:36:44 +07:00
442a33ebce
There is no reason to keep the clksrc cleanups separate from the other cleanups, and this resolves some merge conflicts. Conflicts: arch/arm/mach-spear/spear13xx.c drivers/irqchip/Makefile
680 lines
18 KiB
C
680 lines
18 KiB
C
/*
|
|
* Copyright (C) 2009 Integration Software and Electronic Engineering.
|
|
*
|
|
* Modified from mach-omap2/board-generic.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/input.h>
|
|
#include <linux/usb/phy.h>
|
|
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/i2c/twl.h>
|
|
#include <linux/mmc/host.h>
|
|
|
|
#include <linux/mtd/nand.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
|
|
#include <video/omapdss.h>
|
|
#include <video/omap-panel-data.h>
|
|
#include <linux/platform_data/mtd-onenand-omap2.h>
|
|
|
|
#include "common.h"
|
|
#include "gpmc.h"
|
|
#include "mux.h"
|
|
#include "hsmmc.h"
|
|
#include "sdram-numonyx-m65kxxxxam.h"
|
|
#include "common-board-devices.h"
|
|
#include "board-flash.h"
|
|
#include "control.h"
|
|
#include "gpmc-onenand.h"
|
|
|
|
#define IGEP2_SMSC911X_CS 5
|
|
#define IGEP2_SMSC911X_GPIO 176
|
|
#define IGEP2_GPIO_USBH_NRESET 24
|
|
#define IGEP2_GPIO_LED0_GREEN 26
|
|
#define IGEP2_GPIO_LED0_RED 27
|
|
#define IGEP2_GPIO_LED1_RED 28
|
|
#define IGEP2_GPIO_DVI_PUP 170
|
|
|
|
#define IGEP2_RB_GPIO_WIFI_NPD 94
|
|
#define IGEP2_RB_GPIO_WIFI_NRESET 95
|
|
#define IGEP2_RB_GPIO_BT_NRESET 137
|
|
#define IGEP2_RC_GPIO_WIFI_NPD 138
|
|
#define IGEP2_RC_GPIO_WIFI_NRESET 139
|
|
#define IGEP2_RC_GPIO_BT_NRESET 137
|
|
|
|
#define IGEP3_GPIO_LED0_GREEN 54
|
|
#define IGEP3_GPIO_LED0_RED 53
|
|
#define IGEP3_GPIO_LED1_RED 16
|
|
#define IGEP3_GPIO_USBH_NRESET 183
|
|
|
|
#define IGEP_SYSBOOT_MASK 0x1f
|
|
#define IGEP_SYSBOOT_NAND 0x0f
|
|
#define IGEP_SYSBOOT_ONENAND 0x10
|
|
|
|
/*
|
|
* IGEP2 Hardware Revision Table
|
|
*
|
|
* --------------------------------------------------------------------------
|
|
* | Id. | Hw Rev. | HW0 (28) | WIFI_NPD | WIFI_NRESET | BT_NRESET |
|
|
* --------------------------------------------------------------------------
|
|
* | 0 | B | high | gpio94 | gpio95 | - |
|
|
* | 0 | B/C (B-compatible) | high | gpio94 | gpio95 | gpio137 |
|
|
* | 1 | C | low | gpio138 | gpio139 | gpio137 |
|
|
* --------------------------------------------------------------------------
|
|
*/
|
|
|
|
#define IGEP2_BOARD_HWREV_B 0
|
|
#define IGEP2_BOARD_HWREV_C 1
|
|
#define IGEP3_BOARD_HWREV 2
|
|
|
|
static u8 hwrev;
|
|
|
|
static void __init igep2_get_revision(void)
|
|
{
|
|
u8 ret;
|
|
|
|
if (machine_is_igep0030()) {
|
|
hwrev = IGEP3_BOARD_HWREV;
|
|
return;
|
|
}
|
|
|
|
omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT);
|
|
|
|
if (gpio_request_one(IGEP2_GPIO_LED1_RED, GPIOF_IN, "GPIO_HW0_REV")) {
|
|
pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n");
|
|
pr_err("IGEP2: Unknown Hardware Revision\n");
|
|
return;
|
|
}
|
|
|
|
ret = gpio_get_value(IGEP2_GPIO_LED1_RED);
|
|
if (ret == 0) {
|
|
pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n");
|
|
hwrev = IGEP2_BOARD_HWREV_C;
|
|
} else if (ret == 1) {
|
|
pr_info("IGEP2: Hardware Revision B/C (B compatible)\n");
|
|
hwrev = IGEP2_BOARD_HWREV_B;
|
|
} else {
|
|
pr_err("IGEP2: Unknown Hardware Revision\n");
|
|
hwrev = -1;
|
|
}
|
|
|
|
gpio_free(IGEP2_GPIO_LED1_RED);
|
|
}
|
|
|
|
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
|
|
defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) || \
|
|
defined(CONFIG_MTD_NAND_OMAP2) || \
|
|
defined(CONFIG_MTD_NAND_OMAP2_MODULE)
|
|
|
|
#define ONENAND_MAP 0x20000000
|
|
|
|
/* NAND04GR4E1A ( x2 Flash built-in COMBO POP MEMORY )
|
|
* Since the device is equipped with two DataRAMs, and two-plane NAND
|
|
* Flash memory array, these two component enables simultaneous program
|
|
* of 4KiB. Plane1 has only even blocks such as block0, block2, block4
|
|
* while Plane2 has only odd blocks such as block1, block3, block5.
|
|
* So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
|
|
*/
|
|
|
|
static struct mtd_partition igep_flash_partitions[] = {
|
|
{
|
|
.name = "X-Loader",
|
|
.offset = 0,
|
|
.size = 2 * (64*(2*2048))
|
|
},
|
|
{
|
|
.name = "U-Boot",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 6 * (64*(2*2048)),
|
|
},
|
|
{
|
|
.name = "Environment",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 2 * (64*(2*2048)),
|
|
},
|
|
{
|
|
.name = "Kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 12 * (64*(2*2048)),
|
|
},
|
|
{
|
|
.name = "File System",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
static inline u32 igep_get_sysboot_value(void)
|
|
{
|
|
return omap_ctrl_readl(OMAP343X_CONTROL_STATUS) & IGEP_SYSBOOT_MASK;
|
|
}
|
|
|
|
static void __init igep_flash_init(void)
|
|
{
|
|
u32 mux;
|
|
mux = igep_get_sysboot_value();
|
|
|
|
if (mux == IGEP_SYSBOOT_NAND) {
|
|
pr_info("IGEP: initializing NAND memory device\n");
|
|
board_nand_init(igep_flash_partitions,
|
|
ARRAY_SIZE(igep_flash_partitions),
|
|
0, NAND_BUSWIDTH_16, nand_default_timings);
|
|
} else if (mux == IGEP_SYSBOOT_ONENAND) {
|
|
pr_info("IGEP: initializing OneNAND memory device\n");
|
|
board_onenand_init(igep_flash_partitions,
|
|
ARRAY_SIZE(igep_flash_partitions), 0);
|
|
} else {
|
|
pr_err("IGEP: Flash: unsupported sysboot sequence found\n");
|
|
}
|
|
}
|
|
|
|
#else
|
|
static void __init igep_flash_init(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
|
|
|
|
#include <linux/smsc911x.h>
|
|
#include "gpmc-smsc911x.h"
|
|
|
|
static struct omap_smsc911x_platform_data smsc911x_cfg = {
|
|
.cs = IGEP2_SMSC911X_CS,
|
|
.gpio_irq = IGEP2_SMSC911X_GPIO,
|
|
.gpio_reset = -EINVAL,
|
|
.flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
|
|
};
|
|
|
|
static inline void __init igep2_init_smsc911x(void)
|
|
{
|
|
gpmc_smsc911x_init(&smsc911x_cfg);
|
|
}
|
|
|
|
#else
|
|
static inline void __init igep2_init_smsc911x(void) { }
|
|
#endif
|
|
|
|
static struct regulator_consumer_supply igep_vmmc1_supply[] = {
|
|
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
|
|
};
|
|
|
|
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
|
|
static struct regulator_init_data igep_vmmc1 = {
|
|
.constraints = {
|
|
.min_uV = 1850000,
|
|
.max_uV = 3150000,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(igep_vmmc1_supply),
|
|
.consumer_supplies = igep_vmmc1_supply,
|
|
};
|
|
|
|
static struct regulator_consumer_supply igep_vio_supply[] = {
|
|
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
|
|
};
|
|
|
|
static struct regulator_init_data igep_vio = {
|
|
.constraints = {
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.apply_uV = 1,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(igep_vio_supply),
|
|
.consumer_supplies = igep_vio_supply,
|
|
};
|
|
|
|
static struct regulator_consumer_supply igep_vmmc2_supply[] = {
|
|
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
|
|
};
|
|
|
|
static struct regulator_init_data igep_vmmc2 = {
|
|
.constraints = {
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL,
|
|
.always_on = 1,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(igep_vmmc2_supply),
|
|
.consumer_supplies = igep_vmmc2_supply,
|
|
};
|
|
|
|
static struct fixed_voltage_config igep_vwlan = {
|
|
.supply_name = "vwlan",
|
|
.microvolts = 3300000,
|
|
.gpio = -EINVAL,
|
|
.enabled_at_boot = 1,
|
|
.init_data = &igep_vmmc2,
|
|
};
|
|
|
|
static struct platform_device igep_vwlan_device = {
|
|
.name = "reg-fixed-voltage",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &igep_vwlan,
|
|
},
|
|
};
|
|
|
|
static struct omap2_hsmmc_info mmc[] = {
|
|
{
|
|
.mmc = 1,
|
|
.caps = MMC_CAP_4_BIT_DATA,
|
|
.gpio_cd = -EINVAL,
|
|
.gpio_wp = -EINVAL,
|
|
.deferred = true,
|
|
},
|
|
#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
|
|
{
|
|
.mmc = 2,
|
|
.caps = MMC_CAP_4_BIT_DATA,
|
|
.gpio_cd = -EINVAL,
|
|
.gpio_wp = -EINVAL,
|
|
},
|
|
#endif
|
|
{} /* Terminator */
|
|
};
|
|
|
|
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
|
|
#include <linux/leds.h>
|
|
|
|
static struct gpio_led igep_gpio_leds[] = {
|
|
[0] = {
|
|
.name = "omap3:red:user0",
|
|
.default_state = 0,
|
|
},
|
|
[1] = {
|
|
.name = "omap3:green:boot",
|
|
.default_state = 1,
|
|
},
|
|
[2] = {
|
|
.name = "omap3:red:user1",
|
|
.default_state = 0,
|
|
},
|
|
[3] = {
|
|
.name = "omap3:green:user1",
|
|
.default_state = 0,
|
|
.gpio = -EINVAL, /* gets replaced */
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data igep_led_pdata = {
|
|
.leds = igep_gpio_leds,
|
|
.num_leds = ARRAY_SIZE(igep_gpio_leds),
|
|
};
|
|
|
|
static struct platform_device igep_led_device = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &igep_led_pdata,
|
|
},
|
|
};
|
|
|
|
static void __init igep_leds_init(void)
|
|
{
|
|
if (machine_is_igep0020()) {
|
|
igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED;
|
|
igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN;
|
|
igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED;
|
|
} else {
|
|
igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED;
|
|
igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN;
|
|
igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED;
|
|
}
|
|
|
|
platform_device_register(&igep_led_device);
|
|
}
|
|
|
|
#else
|
|
static struct gpio igep_gpio_leds[] __initdata = {
|
|
{ -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:red:d0" },
|
|
{ -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" },
|
|
{ -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:red:d1" },
|
|
};
|
|
|
|
static inline void igep_leds_init(void)
|
|
{
|
|
int i;
|
|
|
|
if (machine_is_igep0020()) {
|
|
igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED;
|
|
igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN;
|
|
igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED;
|
|
} else {
|
|
igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED;
|
|
igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN;
|
|
igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED;
|
|
}
|
|
|
|
if (gpio_request_array(igep_gpio_leds, ARRAY_SIZE(igep_gpio_leds))) {
|
|
pr_warning("IGEP v2: Could not obtain leds gpios\n");
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(igep_gpio_leds); i++)
|
|
gpio_export(igep_gpio_leds[i].gpio, 0);
|
|
}
|
|
#endif
|
|
|
|
static struct gpio igep2_twl_gpios[] = {
|
|
{ -EINVAL, GPIOF_IN, "GPIO_EHCI_NOC" },
|
|
{ -EINVAL, GPIOF_OUT_INIT_LOW, "GPIO_USBH_CPEN" },
|
|
};
|
|
|
|
static int igep_twl_gpio_setup(struct device *dev,
|
|
unsigned gpio, unsigned ngpio)
|
|
{
|
|
int ret;
|
|
|
|
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
|
|
mmc[0].gpio_cd = gpio + 0;
|
|
omap_hsmmc_late_init(mmc);
|
|
|
|
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
|
|
#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
|
|
ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH,
|
|
"gpio-led:green:d1");
|
|
if (ret == 0)
|
|
gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
|
|
else
|
|
pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n");
|
|
#else
|
|
igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;
|
|
#endif
|
|
|
|
if (machine_is_igep0030())
|
|
return 0;
|
|
|
|
/*
|
|
* REVISIT: need ehci-omap hooks for external VBUS
|
|
* power switch and overcurrent detect
|
|
*/
|
|
igep2_twl_gpios[0].gpio = gpio + 1;
|
|
|
|
/* TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN (out, active low) */
|
|
igep2_twl_gpios[1].gpio = gpio + TWL4030_GPIO_MAX;
|
|
|
|
ret = gpio_request_array(igep2_twl_gpios, ARRAY_SIZE(igep2_twl_gpios));
|
|
if (ret < 0)
|
|
pr_err("IGEP2: Could not obtain gpio for USBH_CPEN");
|
|
|
|
return 0;
|
|
};
|
|
|
|
static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
|
|
.use_leds = true,
|
|
.setup = igep_twl_gpio_setup,
|
|
};
|
|
|
|
static struct tfp410_platform_data dvi_panel = {
|
|
.i2c_bus_num = 3,
|
|
.power_down_gpio = IGEP2_GPIO_DVI_PUP,
|
|
};
|
|
|
|
static struct omap_dss_device igep2_dvi_device = {
|
|
.type = OMAP_DISPLAY_TYPE_DPI,
|
|
.name = "dvi",
|
|
.driver_name = "tfp410",
|
|
.data = &dvi_panel,
|
|
.phy.dpi.data_lines = 24,
|
|
};
|
|
|
|
static struct omap_dss_device *igep2_dss_devices[] = {
|
|
&igep2_dvi_device
|
|
};
|
|
|
|
static struct omap_dss_board_info igep2_dss_data = {
|
|
.num_devices = ARRAY_SIZE(igep2_dss_devices),
|
|
.devices = igep2_dss_devices,
|
|
.default_device = &igep2_dvi_device,
|
|
};
|
|
|
|
static struct platform_device *igep_devices[] __initdata = {
|
|
&igep_vwlan_device,
|
|
};
|
|
|
|
static int igep2_keymap[] = {
|
|
KEY(0, 0, KEY_LEFT),
|
|
KEY(0, 1, KEY_RIGHT),
|
|
KEY(0, 2, KEY_A),
|
|
KEY(0, 3, KEY_B),
|
|
KEY(1, 0, KEY_DOWN),
|
|
KEY(1, 1, KEY_UP),
|
|
KEY(1, 2, KEY_E),
|
|
KEY(1, 3, KEY_F),
|
|
KEY(2, 0, KEY_ENTER),
|
|
KEY(2, 1, KEY_I),
|
|
KEY(2, 2, KEY_J),
|
|
KEY(2, 3, KEY_K),
|
|
KEY(3, 0, KEY_M),
|
|
KEY(3, 1, KEY_N),
|
|
KEY(3, 2, KEY_O),
|
|
KEY(3, 3, KEY_P)
|
|
};
|
|
|
|
static struct matrix_keymap_data igep2_keymap_data = {
|
|
.keymap = igep2_keymap,
|
|
.keymap_size = ARRAY_SIZE(igep2_keymap),
|
|
};
|
|
|
|
static struct twl4030_keypad_data igep2_keypad_pdata = {
|
|
.keymap_data = &igep2_keymap_data,
|
|
.rows = 4,
|
|
.cols = 4,
|
|
.rep = 1,
|
|
};
|
|
|
|
static struct twl4030_platform_data igep_twldata = {
|
|
/* platform_data for children goes here */
|
|
.gpio = &igep_twl4030_gpio_pdata,
|
|
.vmmc1 = &igep_vmmc1,
|
|
.vio = &igep_vio,
|
|
};
|
|
|
|
static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = {
|
|
{
|
|
I2C_BOARD_INFO("eeprom", 0x50),
|
|
},
|
|
};
|
|
|
|
static void __init igep_i2c_init(void)
|
|
{
|
|
int ret;
|
|
|
|
omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB,
|
|
TWL_COMMON_REGULATOR_VPLL2);
|
|
igep_twldata.vpll2->constraints.apply_uV = true;
|
|
igep_twldata.vpll2->constraints.name = "VDVI";
|
|
|
|
if (machine_is_igep0020()) {
|
|
/*
|
|
* Bus 3 is attached to the DVI port where devices like the
|
|
* pico DLP projector don't work reliably with 400kHz
|
|
*/
|
|
ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo,
|
|
ARRAY_SIZE(igep2_i2c3_boardinfo));
|
|
if (ret)
|
|
pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
|
|
|
|
igep_twldata.keypad = &igep2_keypad_pdata;
|
|
/* Get common pmic data */
|
|
omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, 0);
|
|
}
|
|
|
|
omap3_pmic_init("twl4030", &igep_twldata);
|
|
}
|
|
|
|
static struct usbhs_phy_data igep2_phy_data[] __initdata = {
|
|
{
|
|
.port = 1,
|
|
.reset_gpio = IGEP2_GPIO_USBH_NRESET,
|
|
.vcc_gpio = -EINVAL,
|
|
},
|
|
};
|
|
|
|
static struct usbhs_phy_data igep3_phy_data[] __initdata = {
|
|
{
|
|
.port = 2,
|
|
.reset_gpio = IGEP3_GPIO_USBH_NRESET,
|
|
.vcc_gpio = -EINVAL,
|
|
},
|
|
};
|
|
|
|
static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
|
|
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
|
|
};
|
|
|
|
static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
|
|
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
|
|
};
|
|
|
|
#ifdef CONFIG_OMAP_MUX
|
|
static struct omap_board_mux board_mux[] __initdata = {
|
|
/* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
|
|
OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
|
|
{ .reg_offset = OMAP_MUX_TERMINATOR },
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
|
|
static struct gpio igep_wlan_bt_gpios[] __initdata = {
|
|
{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD" },
|
|
{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" },
|
|
{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET" },
|
|
};
|
|
|
|
static void __init igep_wlan_bt_init(void)
|
|
{
|
|
int err;
|
|
|
|
/* GPIO's for WLAN-BT combo depends on hardware revision */
|
|
if (hwrev == IGEP2_BOARD_HWREV_B) {
|
|
igep_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD;
|
|
igep_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET;
|
|
igep_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET;
|
|
} else if (hwrev == IGEP2_BOARD_HWREV_C || machine_is_igep0030()) {
|
|
igep_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD;
|
|
igep_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET;
|
|
igep_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET;
|
|
} else
|
|
return;
|
|
|
|
/* Make sure that the GPIO pins are muxed correctly */
|
|
omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
|
|
omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
|
|
omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
|
|
|
|
err = gpio_request_array(igep_wlan_bt_gpios,
|
|
ARRAY_SIZE(igep_wlan_bt_gpios));
|
|
if (err) {
|
|
pr_warning("IGEP2: Could not obtain WIFI/BT gpios\n");
|
|
return;
|
|
}
|
|
|
|
gpio_export(igep_wlan_bt_gpios[0].gpio, 0);
|
|
gpio_export(igep_wlan_bt_gpios[1].gpio, 0);
|
|
gpio_export(igep_wlan_bt_gpios[2].gpio, 0);
|
|
|
|
gpio_set_value(igep_wlan_bt_gpios[1].gpio, 0);
|
|
udelay(10);
|
|
gpio_set_value(igep_wlan_bt_gpios[1].gpio, 1);
|
|
|
|
}
|
|
#else
|
|
static inline void __init igep_wlan_bt_init(void) { }
|
|
#endif
|
|
|
|
static struct regulator_consumer_supply dummy_supplies[] = {
|
|
REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
|
|
REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
|
|
};
|
|
|
|
static void __init igep_init(void)
|
|
{
|
|
regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
|
|
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
|
|
|
|
/* Get IGEP2 hardware revision */
|
|
igep2_get_revision();
|
|
|
|
omap_hsmmc_init(mmc);
|
|
|
|
/* Register I2C busses and drivers */
|
|
igep_i2c_init();
|
|
platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
|
|
omap_serial_init();
|
|
omap_sdrc_init(m65kxxxxam_sdrc_params,
|
|
m65kxxxxam_sdrc_params);
|
|
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
|
|
usb_musb_init(NULL);
|
|
|
|
igep_flash_init();
|
|
igep_leds_init();
|
|
omap_twl4030_audio_init("igep2", NULL);
|
|
|
|
/*
|
|
* WLAN-BT combo module from MuRata which has a Marvell WLAN
|
|
* (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
|
|
*/
|
|
igep_wlan_bt_init();
|
|
|
|
if (machine_is_igep0020()) {
|
|
omap_display_init(&igep2_dss_data);
|
|
igep2_init_smsc911x();
|
|
usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data));
|
|
usbhs_init(&igep2_usbhs_bdata);
|
|
} else {
|
|
usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data));
|
|
usbhs_init(&igep3_usbhs_bdata);
|
|
}
|
|
}
|
|
|
|
MACHINE_START(IGEP0020, "IGEP v2 board")
|
|
.atag_offset = 0x100,
|
|
.reserve = omap_reserve,
|
|
.map_io = omap3_map_io,
|
|
.init_early = omap35xx_init_early,
|
|
.init_irq = omap3_init_irq,
|
|
.handle_irq = omap3_intc_handle_irq,
|
|
.init_machine = igep_init,
|
|
.init_late = omap35xx_init_late,
|
|
.init_time = omap3_sync32k_timer_init,
|
|
.restart = omap3xxx_restart,
|
|
MACHINE_END
|
|
|
|
MACHINE_START(IGEP0030, "IGEP OMAP3 module")
|
|
.atag_offset = 0x100,
|
|
.reserve = omap_reserve,
|
|
.map_io = omap3_map_io,
|
|
.init_early = omap35xx_init_early,
|
|
.init_irq = omap3_init_irq,
|
|
.handle_irq = omap3_intc_handle_irq,
|
|
.init_machine = igep_init,
|
|
.init_late = omap35xx_init_late,
|
|
.init_time = omap3_sync32k_timer_init,
|
|
.restart = omap3xxx_restart,
|
|
MACHINE_END
|