| .. |
|
include/mach
|
[ARM] pxa/balloon3: Add NAND driver
|
2010-08-05 14:32:47 +08:00 |
|
am200epd.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
am300epd.c
|
broadsheetfb: add multiple panel type support
|
2010-03-12 15:52:32 -08:00 |
|
balloon3.c
|
[ARM] pxa/balloon3: Add MAX1586 PMIC support
|
2010-08-05 14:32:48 +08:00 |
|
capc7117.c
|
[ARM] pxa: add support for Embedian MXM-8x10
|
2010-03-02 07:40:51 +08:00 |
|
clock.c
|
ARM: Consolidate clks_register() and similar
|
2010-02-12 17:32:36 +00:00 |
|
clock.h
|
ARM: Consolidate clks_register() and similar
|
2010-02-12 17:32:36 +00:00 |
|
cm-x2xx-pci.c
|
[ARM] pxa: use chip->ack() instead of accessing GEDR directly
|
2010-03-02 07:40:45 +08:00 |
|
cm-x2xx-pci.h
|
[ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255
|
2008-10-07 12:05:05 +01:00 |
|
cm-x2xx.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
cm-x255.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa25x platforms
|
2010-03-02 07:40:46 +08:00 |
|
cm-x270.c
|
[ARM] pxa/cm-x270: avoid direct access of GPIO/MFP registers
|
2010-03-02 07:40:48 +08:00 |
|
cm-x300.c
|
[ARM] pxa/cm-x300: enable the IRQ_WAKEUP0 as wakeup source.
|
2010-08-05 14:32:18 +08:00 |
|
colibri-pxa3xx.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
|
colibri-pxa270-evalboard.c
|
[ARM] pxa/colibri270: Split module and base board code
|
2010-06-18 15:07:34 +08:00 |
|
colibri-pxa270-income.c
|
[ARM] pxa/income: Add Income SBC support
|
2010-06-18 15:07:34 +08:00 |
|
colibri-pxa270.c
|
[ARM] pxa/income: Add Income SBC support
|
2010-06-18 15:07:34 +08:00 |
|
colibri-pxa300.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
colibri-pxa320.c
|
[ARM] pxa/colibri320: Add UDC support
|
2010-08-05 14:32:25 +08:00 |
|
corgi_pm.c
|
[ARM] pxa: removed mostly unused and confusing two sharpsl.h
|
2010-08-05 14:32:38 +08:00 |
|
corgi.c
|
[ARM] pxa: removed mostly unused and confusing two sharpsl.h
|
2010-08-05 14:32:38 +08:00 |
|
cpufreq-pxa2xx.c
|
[ARM] pxa: cpufreq-pxa2xx: fix DRI recomputation routine
|
2010-08-05 14:32:28 +08:00 |
|
cpufreq-pxa3xx.c
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
|
2010-03-30 22:02:32 +09:00 |
|
csb701.c
|
[ARM] pxa/csb701: do not register devices on non-csb726 boads
|
2009-04-04 10:26:35 +08:00 |
|
csb726.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
|
devices.c
|
[ARM] pxa: move pmu device back into mach-pxa/
|
2010-08-05 14:32:19 +08:00 |
|
devices.h
|
[ARM] pxa: move pmu device back into mach-pxa/
|
2010-08-05 14:32:19 +08:00 |
|
em-x270.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
|
eseries.c
|
[ARM] pxa: merge all eseries board code into eseries.c
|
2010-08-05 14:32:20 +08:00 |
|
eseries.h
|
[ARM] pxa: Add multi-io support for e-series
|
2008-12-15 03:29:34 +00:00 |
|
ezx.c
|
[ARM] pxa/ezx: add leds-lp3944 support for A910 EZX phone
|
2009-12-01 09:03:03 +08:00 |
|
generic.c
|
[ARM] pxa: remove pxa_gpio_mode() and files
|
2010-05-11 17:25:01 +02:00 |
|
generic.h
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
gumstix.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
h5000.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
himalaya.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
hx4700.c
|
[ARM] pxa/hx4700: actually use platform_lcd driver
|
2009-12-01 09:03:15 +08:00 |
|
icontrol.c
|
Add hotplug support to mcp251x driver
|
2010-03-30 23:51:09 -07:00 |
|
idp.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa25x platforms
|
2010-03-02 07:40:46 +08:00 |
|
irq.c
|
[ARM] pxa: fix irq suspend/resume for pxa25x
|
2010-01-13 21:01:09 +08:00 |
|
Kconfig
|
[ARM] pxa/palm: Flip Palm LD,TX,T5,Z72 to Palm27x
|
2010-08-05 14:32:40 +08:00 |
|
leds-idp.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
leds-lubbock.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
leds-mainstone.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
leds.c
|
[ARM] 5251/1: remove old LED support for Trizeps4 SOM
|
2008-10-01 22:34:34 +01:00 |
|
leds.h
|
fix file specification in comments
|
2006-10-03 23:01:26 +02:00 |
|
littleton.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
|
lpd270.c
|
[ARM] pxa: add the missing AC97 pin configurations
|
2010-03-02 07:40:48 +08:00 |
|
lubbock.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
|
magician.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
|
2010-03-02 07:40:47 +08:00 |
|
mainstone.c
|
[ARM] pxa: add the missing AC97 pin configurations
|
2010-03-02 07:40:48 +08:00 |
|
Makefile
|
[ARM] pxa/palm: Introduce Palm27x
|
2010-08-05 14:32:39 +08:00 |
|
Makefile.boot
|
Linux-2.6.12-rc2
|
2005-04-16 15:20:36 -07:00 |
|
mfp-pxa2xx.c
|
[ARM] pxa: allow MFP_LPM_INPUT to be explicitly specified
|
2010-05-11 17:25:00 +02:00 |
|
mfp-pxa3xx.c
|
[ARM] pxa: move common MFP handling code into plat-pxa
|
2009-03-23 10:11:34 +08:00 |
|
mioa701_bootresume.S
|
[ARM] pxa/MioA701: fix memory corruption.
|
2008-11-22 20:57:21 +08:00 |
|
mioa701.c
|
[ARM] pxa: fix all devices using wm97xx_batt.h
|
2010-08-05 14:32:14 +08:00 |
|
mp900.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
mxm8x10.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
|
palm27x.c
|
[ARM] pxa/palm: Introduce Palm27x
|
2010-08-05 14:32:39 +08:00 |
|
palmld.c
|
[ARM] pxa/palm: Flip Palm LD,TX,T5,Z72 to Palm27x
|
2010-08-05 14:32:40 +08:00 |
|
palmt5.c
|
[ARM] pxa/palm: Flip Palm LD,TX,T5,Z72 to Palm27x
|
2010-08-05 14:32:40 +08:00 |
|
palmtc.c
|
[ARM] pxa/palmtc: storage class should be before const qualifier
|
2010-05-31 12:03:44 +08:00 |
|
palmte2.c
|
[ARM] pxa: fix all devices using wm97xx_batt.h
|
2010-08-05 14:32:14 +08:00 |
|
palmtreo.c
|
[ARM] pxa/palm: Flip Palm LD,TX,T5,Z72 to Palm27x
|
2010-08-05 14:32:40 +08:00 |
|
palmtx.c
|
[ARM] pxa/palm: Flip Palm LD,TX,T5,Z72 to Palm27x
|
2010-08-05 14:32:40 +08:00 |
|
palmz72.c
|
[ARM] pxa/palm: Flip Palm LD,TX,T5,Z72 to Palm27x
|
2010-08-05 14:32:40 +08:00 |
|
pcm027.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
pcm990-baseboard.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
|
pm.c
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
|
2010-03-30 22:02:32 +09:00 |
|
poodle.c
|
[ARM] pxa: removed mostly unused and confusing two sharpsl.h
|
2010-08-05 14:32:38 +08:00 |
|
pxa2xx.c
|
[ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c
|
2009-09-10 18:49:39 +08:00 |
|
pxa3xx.c
|
[ARM] pxa: fix HSIO bus x24 multiplier for pxa3xx
|
2010-08-05 14:32:27 +08:00 |
|
pxa25x.c
|
[ARM] pxa: move pmu device back into mach-pxa/
|
2010-08-05 14:32:19 +08:00 |
|
pxa27x.c
|
[ARM] pxa: move pmu device back into mach-pxa/
|
2010-08-05 14:32:19 +08:00 |
|
pxa300.c
|
ARM: Consolidate clks_register() and similar
|
2010-02-12 17:32:36 +00:00 |
|
pxa320.c
|
ARM: Consolidate clks_register() and similar
|
2010-02-12 17:32:36 +00:00 |
|
pxa930.c
|
[ARM] pxa: support mfp of pxa935
|
2009-09-10 18:49:24 +08:00 |
|
raumfeld.c
|
[ARM] pxa/raumfeld: Check charge state after resume
|
2010-06-18 15:07:35 +08:00 |
|
reset.c
|
[ARM] pxa: allow gpio_reset drive high during normal work
|
2009-05-18 21:52:09 +08:00 |
|
saar.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
sharpsl_pm.c
|
[ARM] pxa: removed mostly unused and confusing two sharpsl.h
|
2010-08-05 14:32:38 +08:00 |
|
sleep.S
|
[ARM] pxa: removing dead XSCALE_CACHE_ERRATA
|
2010-08-05 14:32:33 +08:00 |
|
smemc.c
|
[ARM] pxa: avoid polluting the kernel's namespace
|
2008-11-28 16:04:54 +00:00 |
|
spitz_pm.c
|
[ARM] pxa: removed mostly unused and confusing two sharpsl.h
|
2010-08-05 14:32:38 +08:00 |
|
spitz.c
|
[ARM] pxa/spitz: Formating and naming fixes
|
2010-08-05 14:32:42 +08:00 |
|
standby.S
|
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
|
2009-03-09 21:22:40 +08:00 |
|
stargate2.c
|
[ARM] pxa: merge stargate2 and imote2 board files
|
2010-08-05 14:32:16 +08:00 |
|
tavorevb.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
time.c
|
arm/{pxa,sa1100,nomadik}: Don't disable irqs in set_next_event and set_mode
|
2010-01-22 17:04:52 +01:00 |
|
tosa-bt.c
|
rfkill: rewrite
|
2009-06-03 14:06:13 -04:00 |
|
tosa.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
|
trizeps4.c
|
[ARM] pxa: removing dead IDE_PXA_CF
|
2010-08-05 14:32:34 +08:00 |
|
viper.c
|
[ARM] pxa/viper: fix timeout usage for I2C
|
2010-05-06 11:12:11 +08:00 |
|
vpac270.c
|
[ARM] pxa/vpac270: Add VGA modes for ADV7125
|
2010-06-18 15:07:33 +08:00 |
|
xcep.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
|
z2.c
|
[ARM] pxa/z2: Fix flash layout typo
|
2010-08-05 14:32:43 +08:00 |
|
zeus.c
|
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
|
2010-05-20 21:04:44 -07:00 |
|
zylonite_pxa300.c
|
[ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot
|
2009-12-29 14:11:34 +08:00 |
|
zylonite_pxa320.c
|
[ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot
|
2009-12-29 14:11:34 +08:00 |
|
zylonite.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
