mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 06:10:54 +07:00
a07e6ab41b
This message describes another issue about md RAID10 found by testing the 2.6.24 md RAID10 using new scsi fault injection framework. Abstract: When a scsi error results in disabling a disk during RAID10 recovery, the resync threads of md RAID10 could stall. This case, the raid array has already been broken and it may not matter. But I think stall is not preferable. If it occurs, even shutdown or reboot will fail because of resource busy. The deadlock mechanism: The r10bio_s structure has a "remaining" member to keep track of BIOs yet to be handled when recovering. The "remaining" counter is incremented when building a BIO in sync_request() and is decremented when finish a BIO in end_sync_write(). If building a BIO fails for some reasons in sync_request(), the "remaining" should be decremented if it has already been incremented. I found a case where this decrement is forgotten. This causes a md_do_sync() deadlock because md_do_sync() waits for md_done_sync() called by end_sync_write(), but end_sync_write() never calls md_done_sync() because of the "remaining" counter mismatch. For example, this problem would be reproduced in the following case: Personalities : [raid10] md0 : active raid10 sdf1[4] sde1[5](F) sdd1[2] sdc1[1] sdb1[6](F) 3919616 blocks 64K chunks 2 near-copies [4/2] [_UU_] [>....................] recovery = 2.2% (45376/1959808) finish=0.7min speed=45376K/sec This case, sdf1 is recovering, sdb1 and sde1 are disabled. An additional error with detaching sdd will cause a deadlock. md0 : active raid10 sdf1[4] sde1[5](F) sdd1[6](F) sdc1[1] sdb1[7](F) 3919616 blocks 64K chunks 2 near-copies [4/1] [_U__] [=>...................] recovery = 5.0% (99520/1959808) finish=5.9min speed=5237K/sec 2739 ? S< 0:17 [md0_raid10] 28608 ? D< 0:00 [md0_resync] 28629 pts/1 Ss 0:00 bash 28830 pts/1 R+ 0:00 ps ax 31819 ? D< 0:00 [kjournald] The resync thread keeps working, but actually it is deadlocked. Patch: By this patch, the remaining counter will be decremented if needed. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
---|---|---|
.. | ||
raid6test | ||
.gitignore | ||
bitmap.c | ||
dm-bio-list.h | ||
dm-bio-record.h | ||
dm-crypt.c | ||
dm-delay.c | ||
dm-emc.c | ||
dm-exception-store.c | ||
dm-hw-handler.c | ||
dm-hw-handler.h | ||
dm-io.c | ||
dm-io.h | ||
dm-ioctl.c | ||
dm-linear.c | ||
dm-log.c | ||
dm-log.h | ||
dm-mpath-hp-sw.c | ||
dm-mpath-rdac.c | ||
dm-mpath.c | ||
dm-mpath.h | ||
dm-path-selector.c | ||
dm-path-selector.h | ||
dm-raid1.c | ||
dm-round-robin.c | ||
dm-snap.c | ||
dm-snap.h | ||
dm-stripe.c | ||
dm-table.c | ||
dm-target.c | ||
dm-uevent.c | ||
dm-uevent.h | ||
dm-zero.c | ||
dm.c | ||
dm.h | ||
faulty.c | ||
Kconfig | ||
kcopyd.c | ||
kcopyd.h | ||
linear.c | ||
Makefile | ||
md.c | ||
mktables.c | ||
multipath.c | ||
raid0.c | ||
raid1.c | ||
raid5.c | ||
raid6.h | ||
raid6algos.c | ||
raid6altivec.uc | ||
raid6int.uc | ||
raid6mmx.c | ||
raid6recov.c | ||
raid6sse1.c | ||
raid6sse2.c | ||
raid6x86.h | ||
raid10.c | ||
unroll.pl |