linux_dsm_epyc7002/drivers/usb/cdns3/cdns3-ti.c
Roger Quadros 387c359b84 usb: cdns3: Add TI specific wrapper driver
The J721e platform comes with 2 Cadence USB3 controller
instances. This driver supports the TI specific wrapper
on this platform.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-29 12:55:09 +02:00

237 lines
5.5 KiB
C

// SPDX-License-Identifier: GPL-2.0
/**
* cdns3-ti.c - TI specific Glue layer for Cadence USB Controller
*
* Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
*/
#include <linux/bits.h>
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <linux/of_platform.h>
#include <linux/pm_runtime.h>
/* USB Wrapper register offsets */
#define USBSS_PID 0x0
#define USBSS_W1 0x4
#define USBSS_STATIC_CONFIG 0x8
#define USBSS_PHY_TEST 0xc
#define USBSS_DEBUG_CTRL 0x10
#define USBSS_DEBUG_INFO 0x14
#define USBSS_DEBUG_LINK_STATE 0x18
#define USBSS_DEVICE_CTRL 0x1c
/* Wrapper 1 register bits */
#define USBSS_W1_PWRUP_RST BIT(0)
#define USBSS_W1_OVERCURRENT_SEL BIT(8)
#define USBSS_W1_MODESTRAP_SEL BIT(9)
#define USBSS_W1_OVERCURRENT BIT(16)
#define USBSS_W1_MODESTRAP_MASK GENMASK(18, 17)
#define USBSS_W1_MODESTRAP_SHIFT 17
#define USBSS_W1_USB2_ONLY BIT(19)
/* Static config register bits */
#define USBSS1_STATIC_PLL_REF_SEL_MASK GENMASK(8, 5)
#define USBSS1_STATIC_PLL_REF_SEL_SHIFT 5
#define USBSS1_STATIC_LOOPBACK_MODE_MASK GENMASK(4, 3)
#define USBSS1_STATIC_LOOPBACK_MODE_SHIFT 3
#define USBSS1_STATIC_VBUS_SEL_MASK GENMASK(2, 1)
#define USBSS1_STATIC_VBUS_SEL_SHIFT 1
#define USBSS1_STATIC_LANE_REVERSE BIT(0)
/* Modestrap modes */
enum modestrap_mode { USBSS_MODESTRAP_MODE_NONE,
USBSS_MODESTRAP_MODE_HOST,
USBSS_MODESTRAP_MODE_PERIPHERAL};
struct cdns_ti {
struct device *dev;
void __iomem *usbss;
int usb2_only:1;
int vbus_divider:1;
struct clk *usb2_refclk;
struct clk *lpm_clk;
};
static const int cdns_ti_rate_table[] = { /* in KHZ */
9600,
10000,
12000,
19200,
20000,
24000,
25000,
26000,
38400,
40000,
58000,
50000,
52000,
};
static inline u32 cdns_ti_readl(struct cdns_ti *data, u32 offset)
{
return readl(data->usbss + offset);
}
static inline void cdns_ti_writel(struct cdns_ti *data, u32 offset, u32 value)
{
writel(value, data->usbss + offset);
}
static int cdns_ti_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *node = pdev->dev.of_node;
struct cdns_ti *data;
int error;
u32 reg;
int rate_code, i;
unsigned long rate;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
platform_set_drvdata(pdev, data);
data->dev = dev;
data->usbss = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(data->usbss)) {
dev_err(dev, "can't map IOMEM resource\n");
return PTR_ERR(data->usbss);
}
data->usb2_refclk = devm_clk_get(dev, "ref");
if (IS_ERR(data->usb2_refclk)) {
dev_err(dev, "can't get usb2_refclk\n");
return PTR_ERR(data->usb2_refclk);
}
data->lpm_clk = devm_clk_get(dev, "lpm");
if (IS_ERR(data->lpm_clk)) {
dev_err(dev, "can't get lpm_clk\n");
return PTR_ERR(data->lpm_clk);
}
rate = clk_get_rate(data->usb2_refclk);
rate /= 1000; /* To KHz */
for (i = 0; i < ARRAY_SIZE(cdns_ti_rate_table); i++) {
if (cdns_ti_rate_table[i] == rate)
break;
}
if (i == ARRAY_SIZE(cdns_ti_rate_table)) {
dev_err(dev, "unsupported usb2_refclk rate: %lu KHz\n", rate);
return -EINVAL;
}
rate_code = i;
pm_runtime_enable(dev);
error = pm_runtime_get_sync(dev);
if (error < 0) {
dev_err(dev, "pm_runtime_get_sync failed: %d\n", error);
goto err_get;
}
/* assert RESET */
reg = cdns_ti_readl(data, USBSS_W1);
reg &= ~USBSS_W1_PWRUP_RST;
cdns_ti_writel(data, USBSS_W1, reg);
/* set static config */
reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG);
reg &= ~USBSS1_STATIC_PLL_REF_SEL_MASK;
reg |= rate_code << USBSS1_STATIC_PLL_REF_SEL_SHIFT;
reg &= ~USBSS1_STATIC_VBUS_SEL_MASK;
data->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider");
if (data->vbus_divider)
reg |= 1 << USBSS1_STATIC_VBUS_SEL_SHIFT;
cdns_ti_writel(data, USBSS_STATIC_CONFIG, reg);
reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG);
/* set USB2_ONLY mode if requested */
reg = cdns_ti_readl(data, USBSS_W1);
data->usb2_only = device_property_read_bool(dev, "ti,usb2-only");
if (data->usb2_only)
reg |= USBSS_W1_USB2_ONLY;
/* set default modestrap */
reg |= USBSS_W1_MODESTRAP_SEL;
reg &= ~USBSS_W1_MODESTRAP_MASK;
reg |= USBSS_MODESTRAP_MODE_NONE << USBSS_W1_MODESTRAP_SHIFT;
cdns_ti_writel(data, USBSS_W1, reg);
/* de-assert RESET */
reg |= USBSS_W1_PWRUP_RST;
cdns_ti_writel(data, USBSS_W1, reg);
error = of_platform_populate(node, NULL, NULL, dev);
if (error) {
dev_err(dev, "failed to create children: %d\n", error);
goto err;
}
return 0;
err:
pm_runtime_put_sync(data->dev);
err_get:
pm_runtime_disable(data->dev);
return error;
}
static int cdns_ti_remove_core(struct device *dev, void *c)
{
struct platform_device *pdev = to_platform_device(dev);
platform_device_unregister(pdev);
return 0;
}
static int cdns_ti_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
device_for_each_child(dev, NULL, cdns_ti_remove_core);
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
platform_set_drvdata(pdev, NULL);
return 0;
}
static const struct of_device_id cdns_ti_of_match[] = {
{ .compatible = "ti,j721e-usb", },
{},
};
MODULE_DEVICE_TABLE(of, cdns_ti_of_match);
static struct platform_driver cdns_ti_driver = {
.probe = cdns_ti_probe,
.remove = cdns_ti_remove,
.driver = {
.name = "cdns3-ti",
.of_match_table = cdns_ti_of_match,
},
};
module_platform_driver(cdns_ti_driver);
MODULE_ALIAS("platform:cdns3-ti");
MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Cadence USB3 TI Glue Layer");