mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-24 02:18:18 +07:00
12b67b0d6b
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
1373 lines
39 KiB
C
1373 lines
39 KiB
C
/*
|
|
* Copyright (c) 2008-2011 Atheros Communications Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include "hw.h"
|
|
#include "hw-ops.h"
|
|
#include "../regd.h"
|
|
#include "ar9002_phy.h"
|
|
#include "ar5008_initvals.h"
|
|
|
|
/* All code below is for AR5008, AR9001, AR9002 */
|
|
|
|
#define AR5008_OFDM_RATES 8
|
|
#define AR5008_HT_SS_RATES 8
|
|
#define AR5008_HT_DS_RATES 8
|
|
|
|
#define AR5008_HT20_SHIFT 16
|
|
#define AR5008_HT40_SHIFT 24
|
|
|
|
#define AR5008_11NA_OFDM_SHIFT 0
|
|
#define AR5008_11NA_HT_SS_SHIFT 8
|
|
#define AR5008_11NA_HT_DS_SHIFT 16
|
|
|
|
#define AR5008_11NG_OFDM_SHIFT 4
|
|
#define AR5008_11NG_HT_SS_SHIFT 12
|
|
#define AR5008_11NG_HT_DS_SHIFT 20
|
|
|
|
static const int firstep_table[] =
|
|
/* level: 0 1 2 3 4 5 6 7 8 */
|
|
{ -4, -2, 0, 2, 4, 6, 8, 10, 12 }; /* lvl 0-8, default 2 */
|
|
|
|
/*
|
|
* register values to turn OFDM weak signal detection OFF
|
|
*/
|
|
static const int m1ThreshLow_off = 127;
|
|
static const int m2ThreshLow_off = 127;
|
|
static const int m1Thresh_off = 127;
|
|
static const int m2Thresh_off = 127;
|
|
static const int m2CountThr_off = 31;
|
|
static const int m2CountThrLow_off = 63;
|
|
static const int m1ThreshLowExt_off = 127;
|
|
static const int m2ThreshLowExt_off = 127;
|
|
static const int m1ThreshExt_off = 127;
|
|
static const int m2ThreshExt_off = 127;
|
|
|
|
static const struct ar5416IniArray bank0 = STATIC_INI_ARRAY(ar5416Bank0);
|
|
static const struct ar5416IniArray bank1 = STATIC_INI_ARRAY(ar5416Bank1);
|
|
static const struct ar5416IniArray bank2 = STATIC_INI_ARRAY(ar5416Bank2);
|
|
static const struct ar5416IniArray bank3 = STATIC_INI_ARRAY(ar5416Bank3);
|
|
static const struct ar5416IniArray bank7 = STATIC_INI_ARRAY(ar5416Bank7);
|
|
|
|
static void ar5008_write_bank6(struct ath_hw *ah, unsigned int *writecnt)
|
|
{
|
|
struct ar5416IniArray *array = &ah->iniBank6;
|
|
u32 *data = ah->analogBank6Data;
|
|
int r;
|
|
|
|
ENABLE_REGWRITE_BUFFER(ah);
|
|
|
|
for (r = 0; r < array->ia_rows; r++) {
|
|
REG_WRITE(ah, INI_RA(array, r, 0), data[r]);
|
|
DO_DELAY(*writecnt);
|
|
}
|
|
|
|
REGWRITE_BUFFER_FLUSH(ah);
|
|
}
|
|
|
|
/**
|
|
* ar5008_hw_phy_modify_rx_buffer() - perform analog swizzling of parameters
|
|
* @rfbuf:
|
|
* @reg32:
|
|
* @numBits:
|
|
* @firstBit:
|
|
* @column:
|
|
*
|
|
* Performs analog "swizzling" of parameters into their location.
|
|
* Used on external AR2133/AR5133 radios.
|
|
*/
|
|
static void ar5008_hw_phy_modify_rx_buffer(u32 *rfBuf, u32 reg32,
|
|
u32 numBits, u32 firstBit,
|
|
u32 column)
|
|
{
|
|
u32 tmp32, mask, arrayEntry, lastBit;
|
|
int32_t bitPosition, bitsLeft;
|
|
|
|
tmp32 = ath9k_hw_reverse_bits(reg32, numBits);
|
|
arrayEntry = (firstBit - 1) / 8;
|
|
bitPosition = (firstBit - 1) % 8;
|
|
bitsLeft = numBits;
|
|
while (bitsLeft > 0) {
|
|
lastBit = (bitPosition + bitsLeft > 8) ?
|
|
8 : bitPosition + bitsLeft;
|
|
mask = (((1 << lastBit) - 1) ^ ((1 << bitPosition) - 1)) <<
|
|
(column * 8);
|
|
rfBuf[arrayEntry] &= ~mask;
|
|
rfBuf[arrayEntry] |= ((tmp32 << bitPosition) <<
|
|
(column * 8)) & mask;
|
|
bitsLeft -= 8 - bitPosition;
|
|
tmp32 = tmp32 >> (8 - bitPosition);
|
|
bitPosition = 0;
|
|
arrayEntry++;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Fix on 2.4 GHz band for orientation sensitivity issue by increasing
|
|
* rf_pwd_icsyndiv.
|
|
*
|
|
* Theoretical Rules:
|
|
* if 2 GHz band
|
|
* if forceBiasAuto
|
|
* if synth_freq < 2412
|
|
* bias = 0
|
|
* else if 2412 <= synth_freq <= 2422
|
|
* bias = 1
|
|
* else // synth_freq > 2422
|
|
* bias = 2
|
|
* else if forceBias > 0
|
|
* bias = forceBias & 7
|
|
* else
|
|
* no change, use value from ini file
|
|
* else
|
|
* no change, invalid band
|
|
*
|
|
* 1st Mod:
|
|
* 2422 also uses value of 2
|
|
* <approved>
|
|
*
|
|
* 2nd Mod:
|
|
* Less than 2412 uses value of 0, 2412 and above uses value of 2
|
|
*/
|
|
static void ar5008_hw_force_bias(struct ath_hw *ah, u16 synth_freq)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
u32 tmp_reg;
|
|
int reg_writes = 0;
|
|
u32 new_bias = 0;
|
|
|
|
if (!AR_SREV_5416(ah) || synth_freq >= 3000)
|
|
return;
|
|
|
|
BUG_ON(AR_SREV_9280_20_OR_LATER(ah));
|
|
|
|
if (synth_freq < 2412)
|
|
new_bias = 0;
|
|
else if (synth_freq < 2422)
|
|
new_bias = 1;
|
|
else
|
|
new_bias = 2;
|
|
|
|
/* pre-reverse this field */
|
|
tmp_reg = ath9k_hw_reverse_bits(new_bias, 3);
|
|
|
|
ath_dbg(common, CONFIG, "Force rf_pwd_icsyndiv to %1d on %4d\n",
|
|
new_bias, synth_freq);
|
|
|
|
/* swizzle rf_pwd_icsyndiv */
|
|
ar5008_hw_phy_modify_rx_buffer(ah->analogBank6Data, tmp_reg, 3, 181, 3);
|
|
|
|
/* write Bank 6 with new params */
|
|
ar5008_write_bank6(ah, ®_writes);
|
|
}
|
|
|
|
/**
|
|
* ar5008_hw_set_channel - tune to a channel on the external AR2133/AR5133 radios
|
|
* @ah: atheros hardware structure
|
|
* @chan:
|
|
*
|
|
* For the external AR2133/AR5133 radios, takes the MHz channel value and set
|
|
* the channel value. Assumes writes enabled to analog bus and bank6 register
|
|
* cache in ah->analogBank6Data.
|
|
*/
|
|
static int ar5008_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
u32 channelSel = 0;
|
|
u32 bModeSynth = 0;
|
|
u32 aModeRefSel = 0;
|
|
u32 reg32 = 0;
|
|
u16 freq;
|
|
struct chan_centers centers;
|
|
|
|
ath9k_hw_get_channel_centers(ah, chan, ¢ers);
|
|
freq = centers.synth_center;
|
|
|
|
if (freq < 4800) {
|
|
u32 txctl;
|
|
|
|
if (((freq - 2192) % 5) == 0) {
|
|
channelSel = ((freq - 672) * 2 - 3040) / 10;
|
|
bModeSynth = 0;
|
|
} else if (((freq - 2224) % 5) == 0) {
|
|
channelSel = ((freq - 704) * 2 - 3040) / 10;
|
|
bModeSynth = 1;
|
|
} else {
|
|
ath_err(common, "Invalid channel %u MHz\n", freq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
channelSel = (channelSel << 2) & 0xff;
|
|
channelSel = ath9k_hw_reverse_bits(channelSel, 8);
|
|
|
|
txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL);
|
|
if (freq == 2484) {
|
|
|
|
REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
|
|
txctl | AR_PHY_CCK_TX_CTRL_JAPAN);
|
|
} else {
|
|
REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
|
|
txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN);
|
|
}
|
|
|
|
} else if ((freq % 20) == 0 && freq >= 5120) {
|
|
channelSel =
|
|
ath9k_hw_reverse_bits(((freq - 4800) / 20 << 2), 8);
|
|
aModeRefSel = ath9k_hw_reverse_bits(1, 2);
|
|
} else if ((freq % 10) == 0) {
|
|
channelSel =
|
|
ath9k_hw_reverse_bits(((freq - 4800) / 10 << 1), 8);
|
|
if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah))
|
|
aModeRefSel = ath9k_hw_reverse_bits(2, 2);
|
|
else
|
|
aModeRefSel = ath9k_hw_reverse_bits(1, 2);
|
|
} else if ((freq % 5) == 0) {
|
|
channelSel = ath9k_hw_reverse_bits((freq - 4800) / 5, 8);
|
|
aModeRefSel = ath9k_hw_reverse_bits(1, 2);
|
|
} else {
|
|
ath_err(common, "Invalid channel %u MHz\n", freq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ar5008_hw_force_bias(ah, freq);
|
|
|
|
reg32 =
|
|
(channelSel << 8) | (aModeRefSel << 2) | (bModeSynth << 1) |
|
|
(1 << 5) | 0x1;
|
|
|
|
REG_WRITE(ah, AR_PHY(0x37), reg32);
|
|
|
|
ah->curchan = chan;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ar5008_hw_cmn_spur_mitigate(struct ath_hw *ah,
|
|
struct ath9k_channel *chan, int bin)
|
|
{
|
|
int cur_bin;
|
|
int upper, lower, cur_vit_mask;
|
|
int i;
|
|
int8_t mask_m[123] = {0};
|
|
int8_t mask_p[123] = {0};
|
|
int8_t mask_amt;
|
|
int tmp_mask;
|
|
static const int pilot_mask_reg[4] = {
|
|
AR_PHY_TIMING7, AR_PHY_TIMING8,
|
|
AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60
|
|
};
|
|
static const int chan_mask_reg[4] = {
|
|
AR_PHY_TIMING9, AR_PHY_TIMING10,
|
|
AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60
|
|
};
|
|
static const int inc[4] = { 0, 100, 0, 0 };
|
|
|
|
cur_bin = -6000;
|
|
upper = bin + 100;
|
|
lower = bin - 100;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
int pilot_mask = 0;
|
|
int chan_mask = 0;
|
|
int bp = 0;
|
|
|
|
for (bp = 0; bp < 30; bp++) {
|
|
if ((cur_bin > lower) && (cur_bin < upper)) {
|
|
pilot_mask = pilot_mask | 0x1 << bp;
|
|
chan_mask = chan_mask | 0x1 << bp;
|
|
}
|
|
cur_bin += 100;
|
|
}
|
|
cur_bin += inc[i];
|
|
REG_WRITE(ah, pilot_mask_reg[i], pilot_mask);
|
|
REG_WRITE(ah, chan_mask_reg[i], chan_mask);
|
|
}
|
|
|
|
cur_vit_mask = 6100;
|
|
upper = bin + 120;
|
|
lower = bin - 120;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mask_m); i++) {
|
|
if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) {
|
|
/* workaround for gcc bug #37014 */
|
|
volatile int tmp_v = abs(cur_vit_mask - bin);
|
|
|
|
if (tmp_v < 75)
|
|
mask_amt = 1;
|
|
else
|
|
mask_amt = 0;
|
|
if (cur_vit_mask < 0)
|
|
mask_m[abs(cur_vit_mask / 100)] = mask_amt;
|
|
else
|
|
mask_p[cur_vit_mask / 100] = mask_amt;
|
|
}
|
|
cur_vit_mask -= 100;
|
|
}
|
|
|
|
tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28)
|
|
| (mask_m[48] << 26) | (mask_m[49] << 24)
|
|
| (mask_m[50] << 22) | (mask_m[51] << 20)
|
|
| (mask_m[52] << 18) | (mask_m[53] << 16)
|
|
| (mask_m[54] << 14) | (mask_m[55] << 12)
|
|
| (mask_m[56] << 10) | (mask_m[57] << 8)
|
|
| (mask_m[58] << 6) | (mask_m[59] << 4)
|
|
| (mask_m[60] << 2) | (mask_m[61] << 0);
|
|
REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask);
|
|
REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask);
|
|
|
|
tmp_mask = (mask_m[31] << 28)
|
|
| (mask_m[32] << 26) | (mask_m[33] << 24)
|
|
| (mask_m[34] << 22) | (mask_m[35] << 20)
|
|
| (mask_m[36] << 18) | (mask_m[37] << 16)
|
|
| (mask_m[48] << 14) | (mask_m[39] << 12)
|
|
| (mask_m[40] << 10) | (mask_m[41] << 8)
|
|
| (mask_m[42] << 6) | (mask_m[43] << 4)
|
|
| (mask_m[44] << 2) | (mask_m[45] << 0);
|
|
REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask);
|
|
REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask);
|
|
|
|
tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28)
|
|
| (mask_m[18] << 26) | (mask_m[18] << 24)
|
|
| (mask_m[20] << 22) | (mask_m[20] << 20)
|
|
| (mask_m[22] << 18) | (mask_m[22] << 16)
|
|
| (mask_m[24] << 14) | (mask_m[24] << 12)
|
|
| (mask_m[25] << 10) | (mask_m[26] << 8)
|
|
| (mask_m[27] << 6) | (mask_m[28] << 4)
|
|
| (mask_m[29] << 2) | (mask_m[30] << 0);
|
|
REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask);
|
|
REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask);
|
|
|
|
tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28)
|
|
| (mask_m[2] << 26) | (mask_m[3] << 24)
|
|
| (mask_m[4] << 22) | (mask_m[5] << 20)
|
|
| (mask_m[6] << 18) | (mask_m[7] << 16)
|
|
| (mask_m[8] << 14) | (mask_m[9] << 12)
|
|
| (mask_m[10] << 10) | (mask_m[11] << 8)
|
|
| (mask_m[12] << 6) | (mask_m[13] << 4)
|
|
| (mask_m[14] << 2) | (mask_m[15] << 0);
|
|
REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask);
|
|
REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask);
|
|
|
|
tmp_mask = (mask_p[15] << 28)
|
|
| (mask_p[14] << 26) | (mask_p[13] << 24)
|
|
| (mask_p[12] << 22) | (mask_p[11] << 20)
|
|
| (mask_p[10] << 18) | (mask_p[9] << 16)
|
|
| (mask_p[8] << 14) | (mask_p[7] << 12)
|
|
| (mask_p[6] << 10) | (mask_p[5] << 8)
|
|
| (mask_p[4] << 6) | (mask_p[3] << 4)
|
|
| (mask_p[2] << 2) | (mask_p[1] << 0);
|
|
REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask);
|
|
REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask);
|
|
|
|
tmp_mask = (mask_p[30] << 28)
|
|
| (mask_p[29] << 26) | (mask_p[28] << 24)
|
|
| (mask_p[27] << 22) | (mask_p[26] << 20)
|
|
| (mask_p[25] << 18) | (mask_p[24] << 16)
|
|
| (mask_p[23] << 14) | (mask_p[22] << 12)
|
|
| (mask_p[21] << 10) | (mask_p[20] << 8)
|
|
| (mask_p[19] << 6) | (mask_p[18] << 4)
|
|
| (mask_p[17] << 2) | (mask_p[16] << 0);
|
|
REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask);
|
|
REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask);
|
|
|
|
tmp_mask = (mask_p[45] << 28)
|
|
| (mask_p[44] << 26) | (mask_p[43] << 24)
|
|
| (mask_p[42] << 22) | (mask_p[41] << 20)
|
|
| (mask_p[40] << 18) | (mask_p[39] << 16)
|
|
| (mask_p[38] << 14) | (mask_p[37] << 12)
|
|
| (mask_p[36] << 10) | (mask_p[35] << 8)
|
|
| (mask_p[34] << 6) | (mask_p[33] << 4)
|
|
| (mask_p[32] << 2) | (mask_p[31] << 0);
|
|
REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask);
|
|
REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask);
|
|
|
|
tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28)
|
|
| (mask_p[59] << 26) | (mask_p[58] << 24)
|
|
| (mask_p[57] << 22) | (mask_p[56] << 20)
|
|
| (mask_p[55] << 18) | (mask_p[54] << 16)
|
|
| (mask_p[53] << 14) | (mask_p[52] << 12)
|
|
| (mask_p[51] << 10) | (mask_p[50] << 8)
|
|
| (mask_p[49] << 6) | (mask_p[48] << 4)
|
|
| (mask_p[47] << 2) | (mask_p[46] << 0);
|
|
REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask);
|
|
REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
|
|
}
|
|
|
|
/**
|
|
* ar5008_hw_spur_mitigate - convert baseband spur frequency for external radios
|
|
* @ah: atheros hardware structure
|
|
* @chan:
|
|
*
|
|
* For non single-chip solutions. Converts to baseband spur frequency given the
|
|
* input channel frequency and compute register settings below.
|
|
*/
|
|
static void ar5008_hw_spur_mitigate(struct ath_hw *ah,
|
|
struct ath9k_channel *chan)
|
|
{
|
|
int bb_spur = AR_NO_SPUR;
|
|
int bin;
|
|
int spur_freq_sd;
|
|
int spur_delta_phase;
|
|
int denominator;
|
|
int tmp, new;
|
|
int i;
|
|
|
|
int cur_bb_spur;
|
|
bool is2GHz = IS_CHAN_2GHZ(chan);
|
|
|
|
for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
|
|
cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz);
|
|
if (AR_NO_SPUR == cur_bb_spur)
|
|
break;
|
|
cur_bb_spur = cur_bb_spur - (chan->channel * 10);
|
|
if ((cur_bb_spur > -95) && (cur_bb_spur < 95)) {
|
|
bb_spur = cur_bb_spur;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (AR_NO_SPUR == bb_spur)
|
|
return;
|
|
|
|
bin = bb_spur * 32;
|
|
|
|
tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0));
|
|
new = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI |
|
|
AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER |
|
|
AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK |
|
|
AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK);
|
|
|
|
REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), new);
|
|
|
|
new = (AR_PHY_SPUR_REG_MASK_RATE_CNTL |
|
|
AR_PHY_SPUR_REG_ENABLE_MASK_PPM |
|
|
AR_PHY_SPUR_REG_MASK_RATE_SELECT |
|
|
AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI |
|
|
SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH));
|
|
REG_WRITE(ah, AR_PHY_SPUR_REG, new);
|
|
|
|
spur_delta_phase = ((bb_spur * 524288) / 100) &
|
|
AR_PHY_TIMING11_SPUR_DELTA_PHASE;
|
|
|
|
denominator = IS_CHAN_2GHZ(chan) ? 440 : 400;
|
|
spur_freq_sd = ((bb_spur * 2048) / denominator) & 0x3ff;
|
|
|
|
new = (AR_PHY_TIMING11_USE_SPUR_IN_AGC |
|
|
SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) |
|
|
SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE));
|
|
REG_WRITE(ah, AR_PHY_TIMING11, new);
|
|
|
|
ar5008_hw_cmn_spur_mitigate(ah, chan, bin);
|
|
}
|
|
|
|
/**
|
|
* ar5008_hw_rf_alloc_ext_banks - allocates banks for external radio programming
|
|
* @ah: atheros hardware structure
|
|
*
|
|
* Only required for older devices with external AR2133/AR5133 radios.
|
|
*/
|
|
static int ar5008_hw_rf_alloc_ext_banks(struct ath_hw *ah)
|
|
{
|
|
int size = ah->iniBank6.ia_rows * sizeof(u32);
|
|
|
|
if (AR_SREV_9280_20_OR_LATER(ah))
|
|
return 0;
|
|
|
|
ah->analogBank6Data = devm_kzalloc(ah->dev, size, GFP_KERNEL);
|
|
if (!ah->analogBank6Data)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* *
|
|
* ar5008_hw_set_rf_regs - programs rf registers based on EEPROM
|
|
* @ah: atheros hardware structure
|
|
* @chan:
|
|
* @modesIndex:
|
|
*
|
|
* Used for the external AR2133/AR5133 radios.
|
|
*
|
|
* Reads the EEPROM header info from the device structure and programs
|
|
* all rf registers. This routine requires access to the analog
|
|
* rf device. This is not required for single-chip devices.
|
|
*/
|
|
static bool ar5008_hw_set_rf_regs(struct ath_hw *ah,
|
|
struct ath9k_channel *chan,
|
|
u16 modesIndex)
|
|
{
|
|
u32 eepMinorRev;
|
|
u32 ob5GHz = 0, db5GHz = 0;
|
|
u32 ob2GHz = 0, db2GHz = 0;
|
|
int regWrites = 0;
|
|
int i;
|
|
|
|
/*
|
|
* Software does not need to program bank data
|
|
* for single chip devices, that is AR9280 or anything
|
|
* after that.
|
|
*/
|
|
if (AR_SREV_9280_20_OR_LATER(ah))
|
|
return true;
|
|
|
|
/* Setup rf parameters */
|
|
eepMinorRev = ah->eep_ops->get_eeprom_rev(ah);
|
|
|
|
for (i = 0; i < ah->iniBank6.ia_rows; i++)
|
|
ah->analogBank6Data[i] = INI_RA(&ah->iniBank6, i, modesIndex);
|
|
|
|
/* Only the 5 or 2 GHz OB/DB need to be set for a mode */
|
|
if (eepMinorRev >= 2) {
|
|
if (IS_CHAN_2GHZ(chan)) {
|
|
ob2GHz = ah->eep_ops->get_eeprom(ah, EEP_OB_2);
|
|
db2GHz = ah->eep_ops->get_eeprom(ah, EEP_DB_2);
|
|
ar5008_hw_phy_modify_rx_buffer(ah->analogBank6Data,
|
|
ob2GHz, 3, 197, 0);
|
|
ar5008_hw_phy_modify_rx_buffer(ah->analogBank6Data,
|
|
db2GHz, 3, 194, 0);
|
|
} else {
|
|
ob5GHz = ah->eep_ops->get_eeprom(ah, EEP_OB_5);
|
|
db5GHz = ah->eep_ops->get_eeprom(ah, EEP_DB_5);
|
|
ar5008_hw_phy_modify_rx_buffer(ah->analogBank6Data,
|
|
ob5GHz, 3, 203, 0);
|
|
ar5008_hw_phy_modify_rx_buffer(ah->analogBank6Data,
|
|
db5GHz, 3, 200, 0);
|
|
}
|
|
}
|
|
|
|
/* Write Analog registers */
|
|
REG_WRITE_ARRAY(&bank0, 1, regWrites);
|
|
REG_WRITE_ARRAY(&bank1, 1, regWrites);
|
|
REG_WRITE_ARRAY(&bank2, 1, regWrites);
|
|
REG_WRITE_ARRAY(&bank3, modesIndex, regWrites);
|
|
ar5008_write_bank6(ah, ®Writes);
|
|
REG_WRITE_ARRAY(&bank7, 1, regWrites);
|
|
|
|
return true;
|
|
}
|
|
|
|
static void ar5008_hw_init_bb(struct ath_hw *ah,
|
|
struct ath9k_channel *chan)
|
|
{
|
|
u32 synthDelay;
|
|
|
|
synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
|
|
|
|
REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
|
|
|
|
ath9k_hw_synth_delay(ah, chan, synthDelay);
|
|
}
|
|
|
|
static void ar5008_hw_init_chain_masks(struct ath_hw *ah)
|
|
{
|
|
int rx_chainmask, tx_chainmask;
|
|
|
|
rx_chainmask = ah->rxchainmask;
|
|
tx_chainmask = ah->txchainmask;
|
|
|
|
|
|
switch (rx_chainmask) {
|
|
case 0x5:
|
|
REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP,
|
|
AR_PHY_SWAP_ALT_CHAIN);
|
|
/* fall through */
|
|
case 0x3:
|
|
if (ah->hw_version.macVersion == AR_SREV_REVISION_5416_10) {
|
|
REG_WRITE(ah, AR_PHY_RX_CHAINMASK, 0x7);
|
|
REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, 0x7);
|
|
break;
|
|
}
|
|
/* else: fall through */
|
|
case 0x1:
|
|
case 0x2:
|
|
case 0x7:
|
|
ENABLE_REGWRITE_BUFFER(ah);
|
|
REG_WRITE(ah, AR_PHY_RX_CHAINMASK, rx_chainmask);
|
|
REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, rx_chainmask);
|
|
break;
|
|
default:
|
|
ENABLE_REGWRITE_BUFFER(ah);
|
|
break;
|
|
}
|
|
|
|
REG_WRITE(ah, AR_SELFGEN_MASK, tx_chainmask);
|
|
|
|
REGWRITE_BUFFER_FLUSH(ah);
|
|
|
|
if (tx_chainmask == 0x5) {
|
|
REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP,
|
|
AR_PHY_SWAP_ALT_CHAIN);
|
|
}
|
|
if (AR_SREV_9100(ah))
|
|
REG_WRITE(ah, AR_PHY_ANALOG_SWAP,
|
|
REG_READ(ah, AR_PHY_ANALOG_SWAP) | 0x00000001);
|
|
}
|
|
|
|
static void ar5008_hw_override_ini(struct ath_hw *ah,
|
|
struct ath9k_channel *chan)
|
|
{
|
|
u32 val;
|
|
|
|
/*
|
|
* Set the RX_ABORT and RX_DIS and clear if off only after
|
|
* RXE is set for MAC. This prevents frames with corrupted
|
|
* descriptor status.
|
|
*/
|
|
REG_SET_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
|
|
|
|
if (AR_SREV_9280_20_OR_LATER(ah)) {
|
|
/*
|
|
* For AR9280 and above, there is a new feature that allows
|
|
* Multicast search based on both MAC Address and Key ID.
|
|
* By default, this feature is enabled. But since the driver
|
|
* is not using this feature, we switch it off; otherwise
|
|
* multicast search based on MAC addr only will fail.
|
|
*/
|
|
val = REG_READ(ah, AR_PCU_MISC_MODE2) &
|
|
(~AR_ADHOC_MCAST_KEYID_ENABLE);
|
|
|
|
if (!AR_SREV_9271(ah))
|
|
val &= ~AR_PCU_MISC_MODE2_HWWAR1;
|
|
|
|
if (AR_SREV_9287_11_OR_LATER(ah))
|
|
val = val & (~AR_PCU_MISC_MODE2_HWWAR2);
|
|
|
|
val |= AR_PCU_MISC_MODE2_CFP_IGNORE;
|
|
|
|
REG_WRITE(ah, AR_PCU_MISC_MODE2, val);
|
|
}
|
|
|
|
if (AR_SREV_9280_20_OR_LATER(ah))
|
|
return;
|
|
/*
|
|
* Disable BB clock gating
|
|
* Necessary to avoid issues on AR5416 2.0
|
|
*/
|
|
REG_WRITE(ah, 0x9800 + (651 << 2), 0x11);
|
|
|
|
/*
|
|
* Disable RIFS search on some chips to avoid baseband
|
|
* hang issues.
|
|
*/
|
|
if (AR_SREV_9100(ah) || AR_SREV_9160(ah)) {
|
|
val = REG_READ(ah, AR_PHY_HEAVY_CLIP_FACTOR_RIFS);
|
|
val &= ~AR_PHY_RIFS_INIT_DELAY;
|
|
REG_WRITE(ah, AR_PHY_HEAVY_CLIP_FACTOR_RIFS, val);
|
|
}
|
|
}
|
|
|
|
static void ar5008_hw_set_channel_regs(struct ath_hw *ah,
|
|
struct ath9k_channel *chan)
|
|
{
|
|
u32 phymode;
|
|
u32 enableDacFifo = 0;
|
|
|
|
if (AR_SREV_9285_12_OR_LATER(ah))
|
|
enableDacFifo = (REG_READ(ah, AR_PHY_TURBO) &
|
|
AR_PHY_FC_ENABLE_DAC_FIFO);
|
|
|
|
phymode = AR_PHY_FC_HT_EN | AR_PHY_FC_SHORT_GI_40
|
|
| AR_PHY_FC_SINGLE_HT_LTF1 | AR_PHY_FC_WALSH | enableDacFifo;
|
|
|
|
if (IS_CHAN_HT40(chan)) {
|
|
phymode |= AR_PHY_FC_DYN2040_EN;
|
|
|
|
if (IS_CHAN_HT40PLUS(chan))
|
|
phymode |= AR_PHY_FC_DYN2040_PRI_CH;
|
|
|
|
}
|
|
ENABLE_REGWRITE_BUFFER(ah);
|
|
REG_WRITE(ah, AR_PHY_TURBO, phymode);
|
|
|
|
/* This function do only REG_WRITE, so
|
|
* we can include it to REGWRITE_BUFFER. */
|
|
ath9k_hw_set11nmac2040(ah, chan);
|
|
|
|
REG_WRITE(ah, AR_GTXTO, 25 << AR_GTXTO_TIMEOUT_LIMIT_S);
|
|
REG_WRITE(ah, AR_CST, 0xF << AR_CST_TIMEOUT_LIMIT_S);
|
|
|
|
REGWRITE_BUFFER_FLUSH(ah);
|
|
}
|
|
|
|
|
|
static int ar5008_hw_process_ini(struct ath_hw *ah,
|
|
struct ath9k_channel *chan)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
int i, regWrites = 0;
|
|
u32 modesIndex, freqIndex;
|
|
|
|
if (IS_CHAN_5GHZ(chan)) {
|
|
freqIndex = 1;
|
|
modesIndex = IS_CHAN_HT40(chan) ? 2 : 1;
|
|
} else {
|
|
freqIndex = 2;
|
|
modesIndex = IS_CHAN_HT40(chan) ? 3 : 4;
|
|
}
|
|
|
|
/*
|
|
* Set correct baseband to analog shift setting to
|
|
* access analog chips.
|
|
*/
|
|
REG_WRITE(ah, AR_PHY(0), 0x00000007);
|
|
|
|
/* Write ADDAC shifts */
|
|
REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_EXTERNAL_RADIO);
|
|
if (ah->eep_ops->set_addac)
|
|
ah->eep_ops->set_addac(ah, chan);
|
|
|
|
REG_WRITE_ARRAY(&ah->iniAddac, 1, regWrites);
|
|
REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_INTERNAL_ADDAC);
|
|
|
|
ENABLE_REGWRITE_BUFFER(ah);
|
|
|
|
for (i = 0; i < ah->iniModes.ia_rows; i++) {
|
|
u32 reg = INI_RA(&ah->iniModes, i, 0);
|
|
u32 val = INI_RA(&ah->iniModes, i, modesIndex);
|
|
|
|
if (reg == AR_AN_TOP2 && ah->need_an_top2_fixup)
|
|
val &= ~AR_AN_TOP2_PWDCLKIND;
|
|
|
|
REG_WRITE(ah, reg, val);
|
|
|
|
if (reg >= 0x7800 && reg < 0x78a0
|
|
&& ah->config.analog_shiftreg
|
|
&& (common->bus_ops->ath_bus_type != ATH_USB)) {
|
|
udelay(100);
|
|
}
|
|
|
|
DO_DELAY(regWrites);
|
|
}
|
|
|
|
REGWRITE_BUFFER_FLUSH(ah);
|
|
|
|
if (AR_SREV_9280(ah) || AR_SREV_9287_11_OR_LATER(ah))
|
|
REG_WRITE_ARRAY(&ah->iniModesRxGain, modesIndex, regWrites);
|
|
|
|
if (AR_SREV_9280(ah) || AR_SREV_9285_12_OR_LATER(ah) ||
|
|
AR_SREV_9287_11_OR_LATER(ah))
|
|
REG_WRITE_ARRAY(&ah->iniModesTxGain, modesIndex, regWrites);
|
|
|
|
if (AR_SREV_9271_10(ah)) {
|
|
REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENA);
|
|
REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_ADC_ON, 0xa);
|
|
}
|
|
|
|
ENABLE_REGWRITE_BUFFER(ah);
|
|
|
|
/* Write common array parameters */
|
|
for (i = 0; i < ah->iniCommon.ia_rows; i++) {
|
|
u32 reg = INI_RA(&ah->iniCommon, i, 0);
|
|
u32 val = INI_RA(&ah->iniCommon, i, 1);
|
|
|
|
REG_WRITE(ah, reg, val);
|
|
|
|
if (reg >= 0x7800 && reg < 0x78a0
|
|
&& ah->config.analog_shiftreg
|
|
&& (common->bus_ops->ath_bus_type != ATH_USB)) {
|
|
udelay(100);
|
|
}
|
|
|
|
DO_DELAY(regWrites);
|
|
}
|
|
|
|
REGWRITE_BUFFER_FLUSH(ah);
|
|
|
|
REG_WRITE_ARRAY(&ah->iniBB_RfGain, freqIndex, regWrites);
|
|
|
|
if (IS_CHAN_A_FAST_CLOCK(ah, chan))
|
|
REG_WRITE_ARRAY(&ah->iniModesFastClock, modesIndex,
|
|
regWrites);
|
|
|
|
ar5008_hw_override_ini(ah, chan);
|
|
ar5008_hw_set_channel_regs(ah, chan);
|
|
ar5008_hw_init_chain_masks(ah);
|
|
ath9k_olc_init(ah);
|
|
ath9k_hw_apply_txpower(ah, chan, false);
|
|
|
|
/* Write analog registers */
|
|
if (!ath9k_hw_set_rf_regs(ah, chan, freqIndex)) {
|
|
ath_err(ath9k_hw_common(ah), "ar5416SetRfRegs failed\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ar5008_hw_set_rfmode(struct ath_hw *ah, struct ath9k_channel *chan)
|
|
{
|
|
u32 rfMode = 0;
|
|
|
|
if (chan == NULL)
|
|
return;
|
|
|
|
if (IS_CHAN_2GHZ(chan))
|
|
rfMode |= AR_PHY_MODE_DYNAMIC;
|
|
else
|
|
rfMode |= AR_PHY_MODE_OFDM;
|
|
|
|
if (!AR_SREV_9280_20_OR_LATER(ah))
|
|
rfMode |= (IS_CHAN_5GHZ(chan)) ?
|
|
AR_PHY_MODE_RF5GHZ : AR_PHY_MODE_RF2GHZ;
|
|
|
|
if (IS_CHAN_A_FAST_CLOCK(ah, chan))
|
|
rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE);
|
|
|
|
REG_WRITE(ah, AR_PHY_MODE, rfMode);
|
|
}
|
|
|
|
static void ar5008_hw_mark_phy_inactive(struct ath_hw *ah)
|
|
{
|
|
REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
|
|
}
|
|
|
|
static void ar5008_hw_set_delta_slope(struct ath_hw *ah,
|
|
struct ath9k_channel *chan)
|
|
{
|
|
u32 coef_scaled, ds_coef_exp, ds_coef_man;
|
|
u32 clockMhzScaled = 0x64000000;
|
|
struct chan_centers centers;
|
|
|
|
if (IS_CHAN_HALF_RATE(chan))
|
|
clockMhzScaled = clockMhzScaled >> 1;
|
|
else if (IS_CHAN_QUARTER_RATE(chan))
|
|
clockMhzScaled = clockMhzScaled >> 2;
|
|
|
|
ath9k_hw_get_channel_centers(ah, chan, ¢ers);
|
|
coef_scaled = clockMhzScaled / centers.synth_center;
|
|
|
|
ath9k_hw_get_delta_slope_vals(ah, coef_scaled, &ds_coef_man,
|
|
&ds_coef_exp);
|
|
|
|
REG_RMW_FIELD(ah, AR_PHY_TIMING3,
|
|
AR_PHY_TIMING3_DSC_MAN, ds_coef_man);
|
|
REG_RMW_FIELD(ah, AR_PHY_TIMING3,
|
|
AR_PHY_TIMING3_DSC_EXP, ds_coef_exp);
|
|
|
|
coef_scaled = (9 * coef_scaled) / 10;
|
|
|
|
ath9k_hw_get_delta_slope_vals(ah, coef_scaled, &ds_coef_man,
|
|
&ds_coef_exp);
|
|
|
|
REG_RMW_FIELD(ah, AR_PHY_HALFGI,
|
|
AR_PHY_HALFGI_DSC_MAN, ds_coef_man);
|
|
REG_RMW_FIELD(ah, AR_PHY_HALFGI,
|
|
AR_PHY_HALFGI_DSC_EXP, ds_coef_exp);
|
|
}
|
|
|
|
static bool ar5008_hw_rfbus_req(struct ath_hw *ah)
|
|
{
|
|
REG_WRITE(ah, AR_PHY_RFBUS_REQ, AR_PHY_RFBUS_REQ_EN);
|
|
return ath9k_hw_wait(ah, AR_PHY_RFBUS_GRANT, AR_PHY_RFBUS_GRANT_EN,
|
|
AR_PHY_RFBUS_GRANT_EN, AH_WAIT_TIMEOUT);
|
|
}
|
|
|
|
static void ar5008_hw_rfbus_done(struct ath_hw *ah)
|
|
{
|
|
u32 synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
|
|
|
|
ath9k_hw_synth_delay(ah, ah->curchan, synthDelay);
|
|
|
|
REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0);
|
|
}
|
|
|
|
static void ar5008_restore_chainmask(struct ath_hw *ah)
|
|
{
|
|
int rx_chainmask = ah->rxchainmask;
|
|
|
|
if ((rx_chainmask == 0x5) || (rx_chainmask == 0x3)) {
|
|
REG_WRITE(ah, AR_PHY_RX_CHAINMASK, rx_chainmask);
|
|
REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, rx_chainmask);
|
|
}
|
|
}
|
|
|
|
static u32 ar9160_hw_compute_pll_control(struct ath_hw *ah,
|
|
struct ath9k_channel *chan)
|
|
{
|
|
u32 pll;
|
|
|
|
pll = SM(0x5, AR_RTC_9160_PLL_REFDIV);
|
|
|
|
if (chan && IS_CHAN_HALF_RATE(chan))
|
|
pll |= SM(0x1, AR_RTC_9160_PLL_CLKSEL);
|
|
else if (chan && IS_CHAN_QUARTER_RATE(chan))
|
|
pll |= SM(0x2, AR_RTC_9160_PLL_CLKSEL);
|
|
|
|
if (chan && IS_CHAN_5GHZ(chan))
|
|
pll |= SM(0x50, AR_RTC_9160_PLL_DIV);
|
|
else
|
|
pll |= SM(0x58, AR_RTC_9160_PLL_DIV);
|
|
|
|
return pll;
|
|
}
|
|
|
|
static u32 ar5008_hw_compute_pll_control(struct ath_hw *ah,
|
|
struct ath9k_channel *chan)
|
|
{
|
|
u32 pll;
|
|
|
|
pll = AR_RTC_PLL_REFDIV_5 | AR_RTC_PLL_DIV2;
|
|
|
|
if (chan && IS_CHAN_HALF_RATE(chan))
|
|
pll |= SM(0x1, AR_RTC_PLL_CLKSEL);
|
|
else if (chan && IS_CHAN_QUARTER_RATE(chan))
|
|
pll |= SM(0x2, AR_RTC_PLL_CLKSEL);
|
|
|
|
if (chan && IS_CHAN_5GHZ(chan))
|
|
pll |= SM(0xa, AR_RTC_PLL_DIV);
|
|
else
|
|
pll |= SM(0xb, AR_RTC_PLL_DIV);
|
|
|
|
return pll;
|
|
}
|
|
|
|
static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
|
|
enum ath9k_ani_cmd cmd,
|
|
int param)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct ath9k_channel *chan = ah->curchan;
|
|
struct ar5416AniState *aniState = &ah->ani;
|
|
s32 value;
|
|
|
|
switch (cmd & ah->ani_function) {
|
|
case ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION:{
|
|
/*
|
|
* on == 1 means ofdm weak signal detection is ON
|
|
* on == 1 is the default, for less noise immunity
|
|
*
|
|
* on == 0 means ofdm weak signal detection is OFF
|
|
* on == 0 means more noise imm
|
|
*/
|
|
u32 on = param ? 1 : 0;
|
|
/*
|
|
* make register setting for default
|
|
* (weak sig detect ON) come from INI file
|
|
*/
|
|
int m1ThreshLow = on ?
|
|
aniState->iniDef.m1ThreshLow : m1ThreshLow_off;
|
|
int m2ThreshLow = on ?
|
|
aniState->iniDef.m2ThreshLow : m2ThreshLow_off;
|
|
int m1Thresh = on ?
|
|
aniState->iniDef.m1Thresh : m1Thresh_off;
|
|
int m2Thresh = on ?
|
|
aniState->iniDef.m2Thresh : m2Thresh_off;
|
|
int m2CountThr = on ?
|
|
aniState->iniDef.m2CountThr : m2CountThr_off;
|
|
int m2CountThrLow = on ?
|
|
aniState->iniDef.m2CountThrLow : m2CountThrLow_off;
|
|
int m1ThreshLowExt = on ?
|
|
aniState->iniDef.m1ThreshLowExt : m1ThreshLowExt_off;
|
|
int m2ThreshLowExt = on ?
|
|
aniState->iniDef.m2ThreshLowExt : m2ThreshLowExt_off;
|
|
int m1ThreshExt = on ?
|
|
aniState->iniDef.m1ThreshExt : m1ThreshExt_off;
|
|
int m2ThreshExt = on ?
|
|
aniState->iniDef.m2ThreshExt : m2ThreshExt_off;
|
|
|
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
|
|
AR_PHY_SFCORR_LOW_M1_THRESH_LOW,
|
|
m1ThreshLow);
|
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
|
|
AR_PHY_SFCORR_LOW_M2_THRESH_LOW,
|
|
m2ThreshLow);
|
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR,
|
|
AR_PHY_SFCORR_M1_THRESH, m1Thresh);
|
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR,
|
|
AR_PHY_SFCORR_M2_THRESH, m2Thresh);
|
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR,
|
|
AR_PHY_SFCORR_M2COUNT_THR, m2CountThr);
|
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
|
|
AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW,
|
|
m2CountThrLow);
|
|
|
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
|
|
AR_PHY_SFCORR_EXT_M1_THRESH_LOW, m1ThreshLowExt);
|
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
|
|
AR_PHY_SFCORR_EXT_M2_THRESH_LOW, m2ThreshLowExt);
|
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
|
|
AR_PHY_SFCORR_EXT_M1_THRESH, m1ThreshExt);
|
|
REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
|
|
AR_PHY_SFCORR_EXT_M2_THRESH, m2ThreshExt);
|
|
|
|
if (on)
|
|
REG_SET_BIT(ah, AR_PHY_SFCORR_LOW,
|
|
AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
|
|
else
|
|
REG_CLR_BIT(ah, AR_PHY_SFCORR_LOW,
|
|
AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
|
|
|
|
if (on != aniState->ofdmWeakSigDetect) {
|
|
ath_dbg(common, ANI,
|
|
"** ch %d: ofdm weak signal: %s=>%s\n",
|
|
chan->channel,
|
|
aniState->ofdmWeakSigDetect ?
|
|
"on" : "off",
|
|
on ? "on" : "off");
|
|
if (on)
|
|
ah->stats.ast_ani_ofdmon++;
|
|
else
|
|
ah->stats.ast_ani_ofdmoff++;
|
|
aniState->ofdmWeakSigDetect = on;
|
|
}
|
|
break;
|
|
}
|
|
case ATH9K_ANI_FIRSTEP_LEVEL:{
|
|
u32 level = param;
|
|
|
|
value = level * 2;
|
|
REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
|
|
AR_PHY_FIND_SIG_FIRSTEP, value);
|
|
REG_RMW_FIELD(ah, AR_PHY_FIND_SIG_LOW,
|
|
AR_PHY_FIND_SIG_FIRSTEP_LOW, value);
|
|
|
|
if (level != aniState->firstepLevel) {
|
|
ath_dbg(common, ANI,
|
|
"** ch %d: level %d=>%d[def:%d] firstep[level]=%d ini=%d\n",
|
|
chan->channel,
|
|
aniState->firstepLevel,
|
|
level,
|
|
ATH9K_ANI_FIRSTEP_LVL,
|
|
value,
|
|
aniState->iniDef.firstep);
|
|
ath_dbg(common, ANI,
|
|
"** ch %d: level %d=>%d[def:%d] firstep_low[level]=%d ini=%d\n",
|
|
chan->channel,
|
|
aniState->firstepLevel,
|
|
level,
|
|
ATH9K_ANI_FIRSTEP_LVL,
|
|
value,
|
|
aniState->iniDef.firstepLow);
|
|
if (level > aniState->firstepLevel)
|
|
ah->stats.ast_ani_stepup++;
|
|
else if (level < aniState->firstepLevel)
|
|
ah->stats.ast_ani_stepdown++;
|
|
aniState->firstepLevel = level;
|
|
}
|
|
break;
|
|
}
|
|
case ATH9K_ANI_SPUR_IMMUNITY_LEVEL:{
|
|
u32 level = param;
|
|
|
|
value = (level + 1) * 2;
|
|
REG_RMW_FIELD(ah, AR_PHY_TIMING5,
|
|
AR_PHY_TIMING5_CYCPWR_THR1, value);
|
|
|
|
REG_RMW_FIELD(ah, AR_PHY_EXT_CCA,
|
|
AR_PHY_EXT_TIMING5_CYCPWR_THR1, value - 1);
|
|
|
|
if (level != aniState->spurImmunityLevel) {
|
|
ath_dbg(common, ANI,
|
|
"** ch %d: level %d=>%d[def:%d] cycpwrThr1[level]=%d ini=%d\n",
|
|
chan->channel,
|
|
aniState->spurImmunityLevel,
|
|
level,
|
|
ATH9K_ANI_SPUR_IMMUNE_LVL,
|
|
value,
|
|
aniState->iniDef.cycpwrThr1);
|
|
ath_dbg(common, ANI,
|
|
"** ch %d: level %d=>%d[def:%d] cycpwrThr1Ext[level]=%d ini=%d\n",
|
|
chan->channel,
|
|
aniState->spurImmunityLevel,
|
|
level,
|
|
ATH9K_ANI_SPUR_IMMUNE_LVL,
|
|
value,
|
|
aniState->iniDef.cycpwrThr1Ext);
|
|
if (level > aniState->spurImmunityLevel)
|
|
ah->stats.ast_ani_spurup++;
|
|
else if (level < aniState->spurImmunityLevel)
|
|
ah->stats.ast_ani_spurdown++;
|
|
aniState->spurImmunityLevel = level;
|
|
}
|
|
break;
|
|
}
|
|
case ATH9K_ANI_MRC_CCK:
|
|
/*
|
|
* You should not see this as AR5008, AR9001, AR9002
|
|
* does not have hardware support for MRC CCK.
|
|
*/
|
|
WARN_ON(1);
|
|
break;
|
|
default:
|
|
ath_dbg(common, ANI, "invalid cmd %u\n", cmd);
|
|
return false;
|
|
}
|
|
|
|
ath_dbg(common, ANI,
|
|
"ANI parameters: SI=%d, ofdmWS=%s FS=%d MRCcck=%s listenTime=%d ofdmErrs=%d cckErrs=%d\n",
|
|
aniState->spurImmunityLevel,
|
|
aniState->ofdmWeakSigDetect ? "on" : "off",
|
|
aniState->firstepLevel,
|
|
aniState->mrcCCK ? "on" : "off",
|
|
aniState->listenTime,
|
|
aniState->ofdmPhyErrCount,
|
|
aniState->cckPhyErrCount);
|
|
return true;
|
|
}
|
|
|
|
static void ar5008_hw_do_getnf(struct ath_hw *ah,
|
|
int16_t nfarray[NUM_NF_READINGS])
|
|
{
|
|
int16_t nf;
|
|
|
|
nf = MS(REG_READ(ah, AR_PHY_CCA), AR_PHY_MINCCA_PWR);
|
|
nfarray[0] = sign_extend32(nf, 8);
|
|
|
|
nf = MS(REG_READ(ah, AR_PHY_CH1_CCA), AR_PHY_CH1_MINCCA_PWR);
|
|
nfarray[1] = sign_extend32(nf, 8);
|
|
|
|
nf = MS(REG_READ(ah, AR_PHY_CH2_CCA), AR_PHY_CH2_MINCCA_PWR);
|
|
nfarray[2] = sign_extend32(nf, 8);
|
|
|
|
if (!IS_CHAN_HT40(ah->curchan))
|
|
return;
|
|
|
|
nf = MS(REG_READ(ah, AR_PHY_EXT_CCA), AR_PHY_EXT_MINCCA_PWR);
|
|
nfarray[3] = sign_extend32(nf, 8);
|
|
|
|
nf = MS(REG_READ(ah, AR_PHY_CH1_EXT_CCA), AR_PHY_CH1_EXT_MINCCA_PWR);
|
|
nfarray[4] = sign_extend32(nf, 8);
|
|
|
|
nf = MS(REG_READ(ah, AR_PHY_CH2_EXT_CCA), AR_PHY_CH2_EXT_MINCCA_PWR);
|
|
nfarray[5] = sign_extend32(nf, 8);
|
|
}
|
|
|
|
/*
|
|
* Initialize the ANI register values with default (ini) values.
|
|
* This routine is called during a (full) hardware reset after
|
|
* all the registers are initialised from the INI.
|
|
*/
|
|
static void ar5008_hw_ani_cache_ini_regs(struct ath_hw *ah)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct ath9k_channel *chan = ah->curchan;
|
|
struct ar5416AniState *aniState = &ah->ani;
|
|
struct ath9k_ani_default *iniDef;
|
|
u32 val;
|
|
|
|
iniDef = &aniState->iniDef;
|
|
|
|
ath_dbg(common, ANI, "ver %d.%d opmode %u chan %d Mhz\n",
|
|
ah->hw_version.macVersion,
|
|
ah->hw_version.macRev,
|
|
ah->opmode,
|
|
chan->channel);
|
|
|
|
val = REG_READ(ah, AR_PHY_SFCORR);
|
|
iniDef->m1Thresh = MS(val, AR_PHY_SFCORR_M1_THRESH);
|
|
iniDef->m2Thresh = MS(val, AR_PHY_SFCORR_M2_THRESH);
|
|
iniDef->m2CountThr = MS(val, AR_PHY_SFCORR_M2COUNT_THR);
|
|
|
|
val = REG_READ(ah, AR_PHY_SFCORR_LOW);
|
|
iniDef->m1ThreshLow = MS(val, AR_PHY_SFCORR_LOW_M1_THRESH_LOW);
|
|
iniDef->m2ThreshLow = MS(val, AR_PHY_SFCORR_LOW_M2_THRESH_LOW);
|
|
iniDef->m2CountThrLow = MS(val, AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW);
|
|
|
|
val = REG_READ(ah, AR_PHY_SFCORR_EXT);
|
|
iniDef->m1ThreshExt = MS(val, AR_PHY_SFCORR_EXT_M1_THRESH);
|
|
iniDef->m2ThreshExt = MS(val, AR_PHY_SFCORR_EXT_M2_THRESH);
|
|
iniDef->m1ThreshLowExt = MS(val, AR_PHY_SFCORR_EXT_M1_THRESH_LOW);
|
|
iniDef->m2ThreshLowExt = MS(val, AR_PHY_SFCORR_EXT_M2_THRESH_LOW);
|
|
iniDef->firstep = REG_READ_FIELD(ah,
|
|
AR_PHY_FIND_SIG,
|
|
AR_PHY_FIND_SIG_FIRSTEP);
|
|
iniDef->firstepLow = REG_READ_FIELD(ah,
|
|
AR_PHY_FIND_SIG_LOW,
|
|
AR_PHY_FIND_SIG_FIRSTEP_LOW);
|
|
iniDef->cycpwrThr1 = REG_READ_FIELD(ah,
|
|
AR_PHY_TIMING5,
|
|
AR_PHY_TIMING5_CYCPWR_THR1);
|
|
iniDef->cycpwrThr1Ext = REG_READ_FIELD(ah,
|
|
AR_PHY_EXT_CCA,
|
|
AR_PHY_EXT_TIMING5_CYCPWR_THR1);
|
|
|
|
/* these levels just got reset to defaults by the INI */
|
|
aniState->spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL;
|
|
aniState->firstepLevel = ATH9K_ANI_FIRSTEP_LVL;
|
|
aniState->ofdmWeakSigDetect = true;
|
|
aniState->mrcCCK = false; /* not available on pre AR9003 */
|
|
}
|
|
|
|
static void ar5008_hw_set_nf_limits(struct ath_hw *ah)
|
|
{
|
|
ah->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_5416_2GHZ;
|
|
ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_5416_2GHZ;
|
|
ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_5416_2GHZ;
|
|
ah->nf_5g.max = AR_PHY_CCA_MAX_GOOD_VAL_5416_5GHZ;
|
|
ah->nf_5g.min = AR_PHY_CCA_MIN_GOOD_VAL_5416_5GHZ;
|
|
ah->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_5416_5GHZ;
|
|
}
|
|
|
|
static void ar5008_hw_set_radar_params(struct ath_hw *ah,
|
|
struct ath_hw_radar_conf *conf)
|
|
{
|
|
u32 radar_0 = 0, radar_1;
|
|
|
|
if (!conf) {
|
|
REG_CLR_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_ENA);
|
|
return;
|
|
}
|
|
|
|
radar_0 |= AR_PHY_RADAR_0_ENA | AR_PHY_RADAR_0_FFT_ENA;
|
|
radar_0 |= SM(conf->fir_power, AR_PHY_RADAR_0_FIRPWR);
|
|
radar_0 |= SM(conf->radar_rssi, AR_PHY_RADAR_0_RRSSI);
|
|
radar_0 |= SM(conf->pulse_height, AR_PHY_RADAR_0_HEIGHT);
|
|
radar_0 |= SM(conf->pulse_rssi, AR_PHY_RADAR_0_PRSSI);
|
|
radar_0 |= SM(conf->pulse_inband, AR_PHY_RADAR_0_INBAND);
|
|
|
|
radar_1 = REG_READ(ah, AR_PHY_RADAR_1);
|
|
radar_1 &= ~(AR_PHY_RADAR_1_MAXLEN | AR_PHY_RADAR_1_RELSTEP_THRESH |
|
|
AR_PHY_RADAR_1_RELPWR_THRESH);
|
|
radar_1 |= AR_PHY_RADAR_1_MAX_RRSSI;
|
|
radar_1 |= AR_PHY_RADAR_1_BLOCK_CHECK;
|
|
radar_1 |= SM(conf->pulse_maxlen, AR_PHY_RADAR_1_MAXLEN);
|
|
radar_1 |= SM(conf->pulse_inband_step, AR_PHY_RADAR_1_RELSTEP_THRESH);
|
|
radar_1 |= SM(conf->radar_inband, AR_PHY_RADAR_1_RELPWR_THRESH);
|
|
|
|
REG_WRITE(ah, AR_PHY_RADAR_0, radar_0);
|
|
REG_WRITE(ah, AR_PHY_RADAR_1, radar_1);
|
|
if (conf->ext_channel)
|
|
REG_SET_BIT(ah, AR_PHY_RADAR_EXT, AR_PHY_RADAR_EXT_ENA);
|
|
else
|
|
REG_CLR_BIT(ah, AR_PHY_RADAR_EXT, AR_PHY_RADAR_EXT_ENA);
|
|
}
|
|
|
|
static void ar5008_hw_set_radar_conf(struct ath_hw *ah)
|
|
{
|
|
struct ath_hw_radar_conf *conf = &ah->radar_conf;
|
|
|
|
conf->fir_power = -33;
|
|
conf->radar_rssi = 20;
|
|
conf->pulse_height = 10;
|
|
conf->pulse_rssi = 15;
|
|
conf->pulse_inband = 15;
|
|
conf->pulse_maxlen = 255;
|
|
conf->pulse_inband_step = 12;
|
|
conf->radar_inband = 8;
|
|
}
|
|
|
|
static void ar5008_hw_init_txpower_cck(struct ath_hw *ah, int16_t *rate_array)
|
|
{
|
|
#define CCK_DELTA(x) ((OLC_FOR_AR9280_20_LATER) ? max((x) - 2, 0) : (x))
|
|
ah->tx_power[0] = CCK_DELTA(rate_array[rate1l]);
|
|
ah->tx_power[1] = CCK_DELTA(min(rate_array[rate2l],
|
|
rate_array[rate2s]));
|
|
ah->tx_power[2] = CCK_DELTA(min(rate_array[rate5_5l],
|
|
rate_array[rate5_5s]));
|
|
ah->tx_power[3] = CCK_DELTA(min(rate_array[rate11l],
|
|
rate_array[rate11s]));
|
|
#undef CCK_DELTA
|
|
}
|
|
|
|
static void ar5008_hw_init_txpower_ofdm(struct ath_hw *ah, int16_t *rate_array,
|
|
int offset)
|
|
{
|
|
int i, idx = 0;
|
|
|
|
for (i = offset; i < offset + AR5008_OFDM_RATES; i++) {
|
|
ah->tx_power[i] = rate_array[idx];
|
|
idx++;
|
|
}
|
|
}
|
|
|
|
static void ar5008_hw_init_txpower_ht(struct ath_hw *ah, int16_t *rate_array,
|
|
int ss_offset, int ds_offset,
|
|
bool is_40, int ht40_delta)
|
|
{
|
|
int i, mcs_idx = (is_40) ? AR5008_HT40_SHIFT : AR5008_HT20_SHIFT;
|
|
|
|
for (i = ss_offset; i < ss_offset + AR5008_HT_SS_RATES; i++) {
|
|
ah->tx_power[i] = rate_array[mcs_idx] + ht40_delta;
|
|
mcs_idx++;
|
|
}
|
|
memcpy(&ah->tx_power[ds_offset], &ah->tx_power[ss_offset],
|
|
AR5008_HT_SS_RATES);
|
|
}
|
|
|
|
void ar5008_hw_init_rate_txpower(struct ath_hw *ah, int16_t *rate_array,
|
|
struct ath9k_channel *chan, int ht40_delta)
|
|
{
|
|
if (IS_CHAN_5GHZ(chan)) {
|
|
ar5008_hw_init_txpower_ofdm(ah, rate_array,
|
|
AR5008_11NA_OFDM_SHIFT);
|
|
if (IS_CHAN_HT20(chan) || IS_CHAN_HT40(chan)) {
|
|
ar5008_hw_init_txpower_ht(ah, rate_array,
|
|
AR5008_11NA_HT_SS_SHIFT,
|
|
AR5008_11NA_HT_DS_SHIFT,
|
|
IS_CHAN_HT40(chan),
|
|
ht40_delta);
|
|
}
|
|
} else {
|
|
ar5008_hw_init_txpower_cck(ah, rate_array);
|
|
ar5008_hw_init_txpower_ofdm(ah, rate_array,
|
|
AR5008_11NG_OFDM_SHIFT);
|
|
if (IS_CHAN_HT20(chan) || IS_CHAN_HT40(chan)) {
|
|
ar5008_hw_init_txpower_ht(ah, rate_array,
|
|
AR5008_11NG_HT_SS_SHIFT,
|
|
AR5008_11NG_HT_DS_SHIFT,
|
|
IS_CHAN_HT40(chan),
|
|
ht40_delta);
|
|
}
|
|
}
|
|
}
|
|
|
|
int ar5008_hw_attach_phy_ops(struct ath_hw *ah)
|
|
{
|
|
struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
|
|
static const u32 ar5416_cca_regs[6] = {
|
|
AR_PHY_CCA,
|
|
AR_PHY_CH1_CCA,
|
|
AR_PHY_CH2_CCA,
|
|
AR_PHY_EXT_CCA,
|
|
AR_PHY_CH1_EXT_CCA,
|
|
AR_PHY_CH2_EXT_CCA
|
|
};
|
|
int ret;
|
|
|
|
ret = ar5008_hw_rf_alloc_ext_banks(ah);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv_ops->rf_set_freq = ar5008_hw_set_channel;
|
|
priv_ops->spur_mitigate_freq = ar5008_hw_spur_mitigate;
|
|
|
|
priv_ops->set_rf_regs = ar5008_hw_set_rf_regs;
|
|
priv_ops->set_channel_regs = ar5008_hw_set_channel_regs;
|
|
priv_ops->init_bb = ar5008_hw_init_bb;
|
|
priv_ops->process_ini = ar5008_hw_process_ini;
|
|
priv_ops->set_rfmode = ar5008_hw_set_rfmode;
|
|
priv_ops->mark_phy_inactive = ar5008_hw_mark_phy_inactive;
|
|
priv_ops->set_delta_slope = ar5008_hw_set_delta_slope;
|
|
priv_ops->rfbus_req = ar5008_hw_rfbus_req;
|
|
priv_ops->rfbus_done = ar5008_hw_rfbus_done;
|
|
priv_ops->restore_chainmask = ar5008_restore_chainmask;
|
|
priv_ops->do_getnf = ar5008_hw_do_getnf;
|
|
priv_ops->set_radar_params = ar5008_hw_set_radar_params;
|
|
|
|
priv_ops->ani_control = ar5008_hw_ani_control_new;
|
|
priv_ops->ani_cache_ini_regs = ar5008_hw_ani_cache_ini_regs;
|
|
|
|
if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah))
|
|
priv_ops->compute_pll_control = ar9160_hw_compute_pll_control;
|
|
else
|
|
priv_ops->compute_pll_control = ar5008_hw_compute_pll_control;
|
|
|
|
ar5008_hw_set_nf_limits(ah);
|
|
ar5008_hw_set_radar_conf(ah);
|
|
memcpy(ah->nf_regs, ar5416_cca_regs, sizeof(ah->nf_regs));
|
|
return 0;
|
|
}
|