mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-26 21:30:54 +07:00
4c821d1c93
The A23 uses the same pin controller as previous SoC's from Allwinner. Add support for the pins controlled by the main PIO controller. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
67 lines
1.9 KiB
Plaintext
67 lines
1.9 KiB
Plaintext
* Allwinner A1X Pin Controller
|
|
|
|
The pins controlled by sunXi pin controller are organized in banks,
|
|
each bank has 32 pins. Each pin has 7 multiplexing functions, with
|
|
the first two functions being GPIO in and out. The configuration on
|
|
the pins includes drive strength and pull-up.
|
|
|
|
Required properties:
|
|
- compatible: Should be one of the followings (depending on you SoC):
|
|
"allwinner,sun4i-a10-pinctrl"
|
|
"allwinner,sun5i-a10s-pinctrl"
|
|
"allwinner,sun5i-a13-pinctrl"
|
|
"allwinner,sun6i-a31-pinctrl"
|
|
"allwinner,sun6i-a31-r-pinctrl"
|
|
"allwinner,sun7i-a20-pinctrl"
|
|
"allwinner,sun8i-a23-pinctrl"
|
|
- reg: Should contain the register physical address and length for the
|
|
pin controller.
|
|
|
|
Please refer to pinctrl-bindings.txt in this directory for details of the
|
|
common pinctrl bindings used by client devices.
|
|
|
|
A pinctrl node should contain at least one subnodes representing the
|
|
pinctrl groups available on the machine. Each subnode will list the
|
|
pins it needs, and how they should be configured, with regard to muxer
|
|
configuration, drive strength and pullups. If one of these options is
|
|
not set, its actual value will be unspecified.
|
|
|
|
Required subnode-properties:
|
|
|
|
- allwinner,pins: List of strings containing the pin name.
|
|
- allwinner,function: Function to mux the pins listed above to.
|
|
|
|
Optional subnode-properties:
|
|
- allwinner,drive: Integer. Represents the current sent to the pin
|
|
0: 10 mA
|
|
1: 20 mA
|
|
2: 30 mA
|
|
3: 40 mA
|
|
- allwinner,pull: Integer.
|
|
0: No resistor
|
|
1: Pull-up resistor
|
|
2: Pull-down resistor
|
|
|
|
Examples:
|
|
|
|
pinctrl@01c20800 {
|
|
compatible = "allwinner,sun5i-a13-pinctrl";
|
|
reg = <0x01c20800 0x400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
uart1_pins_a: uart1@0 {
|
|
allwinner,pins = "PE10", "PE11";
|
|
allwinner,function = "uart1";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
uart1_pins_b: uart1@1 {
|
|
allwinner,pins = "PG3", "PG4";
|
|
allwinner,function = "uart1";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
};
|