mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 20:23:16 +07:00
5f0632c467
This patch adds support to set the power line polarity for i.MX SoCs. To let the USB controller control the power it may be necessary to configure the polarity of the power line. So far the polarity was configured by Bootloader or alternatively the power line was muxed as gpio and driven by a regulator. Also make use of of_property_read_bool. Signed-off-by: Philipp Puschmann <philipp.puschmann@emlix.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
34 lines
1.0 KiB
C
34 lines
1.0 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2012 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#ifndef __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H
|
|
#define __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H
|
|
|
|
struct imx_usbmisc_data {
|
|
struct device *dev;
|
|
int index;
|
|
|
|
unsigned int disable_oc:1; /* over current detect disabled */
|
|
|
|
/* true if over-current polarity is active low */
|
|
unsigned int oc_pol_active_low:1;
|
|
|
|
/* true if dt specifies polarity */
|
|
unsigned int oc_pol_configured:1;
|
|
|
|
unsigned int pwr_pol:1; /* power polarity */
|
|
unsigned int evdo:1; /* set external vbus divider option */
|
|
unsigned int ulpi:1; /* connected to an ULPI phy */
|
|
unsigned int hsic:1; /* HSIC controlller */
|
|
};
|
|
|
|
int imx_usbmisc_init(struct imx_usbmisc_data *data);
|
|
int imx_usbmisc_init_post(struct imx_usbmisc_data *data);
|
|
int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled);
|
|
int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data);
|
|
int imx_usbmisc_hsic_set_clk(struct imx_usbmisc_data *data, bool on);
|
|
|
|
#endif /* __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H */
|