mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
4c268d635f
The commit d8ff0c63fbcb ("drm/tilcdc: Adjust the FB_CEILING address") added an adjustment of the FB_CEILING address. This is done by decrementing the address by one. On the AM335x (rev 0x4F201000) the framebuffer is rotated left over the display border, because the ceiling address is 8f276fff instead of 8f277000. Since this adjustment isn't necessary for the LCDC v2, the origin ceiling address should be used. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Jyri Sarha <jsarha@ti.com>
897 lines
23 KiB
C
897 lines
23 KiB
C
/*
|
|
* Copyright (C) 2012 Texas Instruments
|
|
* Author: Rob Clark <robdclark@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <drm/drm_atomic.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_crtc.h>
|
|
#include <drm/drm_flip_work.h>
|
|
#include <drm/drm_plane_helper.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#include "tilcdc_drv.h"
|
|
#include "tilcdc_regs.h"
|
|
|
|
#define TILCDC_VBLANK_SAFETY_THRESHOLD_US 1000
|
|
|
|
struct tilcdc_crtc {
|
|
struct drm_crtc base;
|
|
|
|
struct drm_plane primary;
|
|
const struct tilcdc_panel_info *info;
|
|
struct drm_pending_vblank_event *event;
|
|
bool enabled;
|
|
wait_queue_head_t frame_done_wq;
|
|
bool frame_done;
|
|
spinlock_t irq_lock;
|
|
|
|
unsigned int lcd_fck_rate;
|
|
|
|
ktime_t last_vblank;
|
|
|
|
struct drm_framebuffer *curr_fb;
|
|
struct drm_framebuffer *next_fb;
|
|
|
|
/* for deferred fb unref's: */
|
|
struct drm_flip_work unref_work;
|
|
|
|
/* Only set if an external encoder is connected */
|
|
bool simulate_vesa_sync;
|
|
|
|
int sync_lost_count;
|
|
bool frame_intact;
|
|
};
|
|
#define to_tilcdc_crtc(x) container_of(x, struct tilcdc_crtc, base)
|
|
|
|
static void unref_worker(struct drm_flip_work *work, void *val)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc =
|
|
container_of(work, struct tilcdc_crtc, unref_work);
|
|
struct drm_device *dev = tilcdc_crtc->base.dev;
|
|
|
|
mutex_lock(&dev->mode_config.mutex);
|
|
drm_framebuffer_unreference(val);
|
|
mutex_unlock(&dev->mode_config.mutex);
|
|
}
|
|
|
|
static void set_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
struct drm_gem_cma_object *gem;
|
|
dma_addr_t start, end;
|
|
u64 dma_base_and_ceiling;
|
|
|
|
gem = drm_fb_cma_get_gem_obj(fb, 0);
|
|
|
|
start = gem->paddr + fb->offsets[0] +
|
|
crtc->y * fb->pitches[0] +
|
|
crtc->x * drm_format_plane_cpp(fb->pixel_format, 0);
|
|
|
|
end = start + (crtc->mode.vdisplay * fb->pitches[0]);
|
|
|
|
/* Write LCDC_DMA_FB_BASE_ADDR_0_REG and LCDC_DMA_FB_CEILING_ADDR_0_REG
|
|
* with a single insruction, if available. This should make it more
|
|
* unlikely that LCDC would fetch the DMA addresses in the middle of
|
|
* an update.
|
|
*/
|
|
if (priv->rev == 1)
|
|
end -= 1;
|
|
|
|
dma_base_and_ceiling = (u64)end << 32 | start;
|
|
tilcdc_write64(dev, LCDC_DMA_FB_BASE_ADDR_0_REG, dma_base_and_ceiling);
|
|
|
|
if (tilcdc_crtc->curr_fb)
|
|
drm_flip_work_queue(&tilcdc_crtc->unref_work,
|
|
tilcdc_crtc->curr_fb);
|
|
|
|
tilcdc_crtc->curr_fb = fb;
|
|
}
|
|
|
|
static void tilcdc_crtc_enable_irqs(struct drm_device *dev)
|
|
{
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
|
|
tilcdc_clear_irqstatus(dev, 0xffffffff);
|
|
|
|
if (priv->rev == 1) {
|
|
tilcdc_set(dev, LCDC_RASTER_CTRL_REG,
|
|
LCDC_V1_UNDERFLOW_INT_ENA);
|
|
tilcdc_set(dev, LCDC_DMA_CTRL_REG,
|
|
LCDC_V1_END_OF_FRAME_INT_ENA);
|
|
} else {
|
|
tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG,
|
|
LCDC_V2_UNDERFLOW_INT_ENA |
|
|
LCDC_V2_END_OF_FRAME0_INT_ENA |
|
|
LCDC_FRAME_DONE | LCDC_SYNC_LOST);
|
|
}
|
|
}
|
|
|
|
static void tilcdc_crtc_disable_irqs(struct drm_device *dev)
|
|
{
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
|
|
/* disable irqs that we might have enabled: */
|
|
if (priv->rev == 1) {
|
|
tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
|
|
LCDC_V1_UNDERFLOW_INT_ENA | LCDC_V1_PL_INT_ENA);
|
|
tilcdc_clear(dev, LCDC_DMA_CTRL_REG,
|
|
LCDC_V1_END_OF_FRAME_INT_ENA);
|
|
} else {
|
|
tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
|
|
LCDC_V2_UNDERFLOW_INT_ENA | LCDC_V2_PL_INT_ENA |
|
|
LCDC_V2_END_OF_FRAME0_INT_ENA |
|
|
LCDC_FRAME_DONE | LCDC_SYNC_LOST);
|
|
}
|
|
}
|
|
|
|
static void reset(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
|
|
if (priv->rev != 2)
|
|
return;
|
|
|
|
tilcdc_set(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
|
|
usleep_range(250, 1000);
|
|
tilcdc_clear(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
|
|
}
|
|
|
|
static void tilcdc_crtc_enable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
|
|
WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
|
|
|
|
if (tilcdc_crtc->enabled)
|
|
return;
|
|
|
|
pm_runtime_get_sync(dev->dev);
|
|
|
|
reset(crtc);
|
|
|
|
tilcdc_crtc_enable_irqs(dev);
|
|
|
|
tilcdc_clear(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE);
|
|
tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_PALETTE_LOAD_MODE(DATA_ONLY));
|
|
tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
|
|
|
|
drm_crtc_vblank_on(crtc);
|
|
|
|
tilcdc_crtc->enabled = true;
|
|
}
|
|
|
|
void tilcdc_crtc_disable(struct drm_crtc *crtc)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
|
|
WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
|
|
|
|
if (!tilcdc_crtc->enabled)
|
|
return;
|
|
|
|
tilcdc_crtc->frame_done = false;
|
|
tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
|
|
|
|
/*
|
|
* if necessary wait for framedone irq which will still come
|
|
* before putting things to sleep..
|
|
*/
|
|
if (priv->rev == 2) {
|
|
int ret = wait_event_timeout(tilcdc_crtc->frame_done_wq,
|
|
tilcdc_crtc->frame_done,
|
|
msecs_to_jiffies(500));
|
|
if (ret == 0)
|
|
dev_err(dev->dev, "%s: timeout waiting for framedone\n",
|
|
__func__);
|
|
}
|
|
|
|
drm_crtc_vblank_off(crtc);
|
|
|
|
tilcdc_crtc_disable_irqs(dev);
|
|
|
|
pm_runtime_put_sync(dev->dev);
|
|
|
|
if (tilcdc_crtc->next_fb) {
|
|
drm_flip_work_queue(&tilcdc_crtc->unref_work,
|
|
tilcdc_crtc->next_fb);
|
|
tilcdc_crtc->next_fb = NULL;
|
|
}
|
|
|
|
if (tilcdc_crtc->curr_fb) {
|
|
drm_flip_work_queue(&tilcdc_crtc->unref_work,
|
|
tilcdc_crtc->curr_fb);
|
|
tilcdc_crtc->curr_fb = NULL;
|
|
}
|
|
|
|
drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq);
|
|
tilcdc_crtc->last_vblank = ktime_set(0, 0);
|
|
|
|
tilcdc_crtc->enabled = false;
|
|
}
|
|
|
|
static bool tilcdc_crtc_is_on(struct drm_crtc *crtc)
|
|
{
|
|
return crtc->state && crtc->state->enable && crtc->state->active;
|
|
}
|
|
|
|
static void tilcdc_crtc_destroy(struct drm_crtc *crtc)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct tilcdc_drm_private *priv = crtc->dev->dev_private;
|
|
|
|
drm_modeset_lock_crtc(crtc, NULL);
|
|
tilcdc_crtc_disable(crtc);
|
|
drm_modeset_unlock_crtc(crtc);
|
|
|
|
flush_workqueue(priv->wq);
|
|
|
|
of_node_put(crtc->port);
|
|
drm_crtc_cleanup(crtc);
|
|
drm_flip_work_cleanup(&tilcdc_crtc->unref_work);
|
|
}
|
|
|
|
int tilcdc_crtc_update_fb(struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_pending_vblank_event *event)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
unsigned long flags;
|
|
|
|
WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
|
|
|
|
if (tilcdc_crtc->event) {
|
|
dev_err(dev->dev, "already pending page flip!\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
drm_framebuffer_reference(fb);
|
|
|
|
crtc->primary->fb = fb;
|
|
|
|
spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
|
|
|
|
if (crtc->hwmode.vrefresh && ktime_to_ns(tilcdc_crtc->last_vblank)) {
|
|
ktime_t next_vblank;
|
|
s64 tdiff;
|
|
|
|
next_vblank = ktime_add_us(tilcdc_crtc->last_vblank,
|
|
1000000 / crtc->hwmode.vrefresh);
|
|
|
|
tdiff = ktime_to_us(ktime_sub(next_vblank, ktime_get()));
|
|
|
|
if (tdiff < TILCDC_VBLANK_SAFETY_THRESHOLD_US)
|
|
tilcdc_crtc->next_fb = fb;
|
|
}
|
|
|
|
if (tilcdc_crtc->next_fb != fb)
|
|
set_scanout(crtc, fb);
|
|
|
|
tilcdc_crtc->event = event;
|
|
|
|
spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool tilcdc_crtc_mode_fixup(struct drm_crtc *crtc,
|
|
const struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
|
|
if (!tilcdc_crtc->simulate_vesa_sync)
|
|
return true;
|
|
|
|
/*
|
|
* tilcdc does not generate VESA-compliant sync but aligns
|
|
* VS on the second edge of HS instead of first edge.
|
|
* We use adjusted_mode, to fixup sync by aligning both rising
|
|
* edges and add HSKEW offset to fix the sync.
|
|
*/
|
|
adjusted_mode->hskew = mode->hsync_end - mode->hsync_start;
|
|
adjusted_mode->flags |= DRM_MODE_FLAG_HSKEW;
|
|
|
|
if (mode->flags & DRM_MODE_FLAG_NHSYNC) {
|
|
adjusted_mode->flags |= DRM_MODE_FLAG_PHSYNC;
|
|
adjusted_mode->flags &= ~DRM_MODE_FLAG_NHSYNC;
|
|
} else {
|
|
adjusted_mode->flags |= DRM_MODE_FLAG_NHSYNC;
|
|
adjusted_mode->flags &= ~DRM_MODE_FLAG_PHSYNC;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Calculate the percentage difference between the requested pixel clock rate
|
|
* and the effective rate resulting from calculating the clock divider value.
|
|
*/
|
|
static unsigned int tilcdc_pclk_diff(unsigned long rate,
|
|
unsigned long real_rate)
|
|
{
|
|
int r = rate / 100, rr = real_rate / 100;
|
|
|
|
return (unsigned int)(abs(((rr - r) * 100) / r));
|
|
}
|
|
|
|
static void tilcdc_crtc_set_clk(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
unsigned long clk_rate, real_rate, req_rate;
|
|
unsigned int clkdiv;
|
|
int ret;
|
|
|
|
clkdiv = 2; /* first try using a standard divider of 2 */
|
|
|
|
/* mode.clock is in KHz, set_rate wants parameter in Hz */
|
|
req_rate = crtc->mode.clock * 1000;
|
|
|
|
ret = clk_set_rate(priv->clk, req_rate * clkdiv);
|
|
clk_rate = clk_get_rate(priv->clk);
|
|
if (ret < 0) {
|
|
/*
|
|
* If we fail to set the clock rate (some architectures don't
|
|
* use the common clock framework yet and may not implement
|
|
* all the clk API calls for every clock), try the next best
|
|
* thing: adjusting the clock divider, unless clk_get_rate()
|
|
* failed as well.
|
|
*/
|
|
if (!clk_rate) {
|
|
/* Nothing more we can do. Just bail out. */
|
|
dev_err(dev->dev,
|
|
"failed to set the pixel clock - unable to read current lcdc clock rate\n");
|
|
return;
|
|
}
|
|
|
|
clkdiv = DIV_ROUND_CLOSEST(clk_rate, req_rate);
|
|
|
|
/*
|
|
* Emit a warning if the real clock rate resulting from the
|
|
* calculated divider differs much from the requested rate.
|
|
*
|
|
* 5% is an arbitrary value - LCDs are usually quite tolerant
|
|
* about pixel clock rates.
|
|
*/
|
|
real_rate = clkdiv * req_rate;
|
|
|
|
if (tilcdc_pclk_diff(clk_rate, real_rate) > 5) {
|
|
dev_warn(dev->dev,
|
|
"effective pixel clock rate (%luHz) differs from the calculated rate (%luHz)\n",
|
|
clk_rate, real_rate);
|
|
}
|
|
}
|
|
|
|
tilcdc_crtc->lcd_fck_rate = clk_rate;
|
|
|
|
DBG("lcd_clk=%u, mode clock=%d, div=%u",
|
|
tilcdc_crtc->lcd_fck_rate, crtc->mode.clock, clkdiv);
|
|
|
|
/* Configure the LCD clock divisor. */
|
|
tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(clkdiv) |
|
|
LCDC_RASTER_MODE);
|
|
|
|
if (priv->rev == 2)
|
|
tilcdc_set(dev, LCDC_CLK_ENABLE_REG,
|
|
LCDC_V2_DMA_CLK_EN | LCDC_V2_LIDD_CLK_EN |
|
|
LCDC_V2_CORE_CLK_EN);
|
|
}
|
|
|
|
static void tilcdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
const struct tilcdc_panel_info *info = tilcdc_crtc->info;
|
|
uint32_t reg, hbp, hfp, hsw, vbp, vfp, vsw;
|
|
struct drm_display_mode *mode = &crtc->state->adjusted_mode;
|
|
struct drm_framebuffer *fb = crtc->primary->state->fb;
|
|
|
|
WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
|
|
|
|
if (WARN_ON(!info))
|
|
return;
|
|
|
|
if (WARN_ON(!fb))
|
|
return;
|
|
|
|
/* Configure the Burst Size and fifo threshold of DMA: */
|
|
reg = tilcdc_read(dev, LCDC_DMA_CTRL_REG) & ~0x00000770;
|
|
switch (info->dma_burst_sz) {
|
|
case 1:
|
|
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_1);
|
|
break;
|
|
case 2:
|
|
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_2);
|
|
break;
|
|
case 4:
|
|
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_4);
|
|
break;
|
|
case 8:
|
|
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_8);
|
|
break;
|
|
case 16:
|
|
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_16);
|
|
break;
|
|
default:
|
|
dev_err(dev->dev, "invalid burst size\n");
|
|
return;
|
|
}
|
|
reg |= (info->fifo_th << 8);
|
|
tilcdc_write(dev, LCDC_DMA_CTRL_REG, reg);
|
|
|
|
/* Configure timings: */
|
|
hbp = mode->htotal - mode->hsync_end;
|
|
hfp = mode->hsync_start - mode->hdisplay;
|
|
hsw = mode->hsync_end - mode->hsync_start;
|
|
vbp = mode->vtotal - mode->vsync_end;
|
|
vfp = mode->vsync_start - mode->vdisplay;
|
|
vsw = mode->vsync_end - mode->vsync_start;
|
|
|
|
DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
|
|
mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
|
|
|
|
/* Set AC Bias Period and Number of Transitions per Interrupt: */
|
|
reg = tilcdc_read(dev, LCDC_RASTER_TIMING_2_REG) & ~0x000fff00;
|
|
reg |= LCDC_AC_BIAS_FREQUENCY(info->ac_bias) |
|
|
LCDC_AC_BIAS_TRANSITIONS_PER_INT(info->ac_bias_intrpt);
|
|
|
|
/*
|
|
* subtract one from hfp, hbp, hsw because the hardware uses
|
|
* a value of 0 as 1
|
|
*/
|
|
if (priv->rev == 2) {
|
|
/* clear bits we're going to set */
|
|
reg &= ~0x78000033;
|
|
reg |= ((hfp-1) & 0x300) >> 8;
|
|
reg |= ((hbp-1) & 0x300) >> 4;
|
|
reg |= ((hsw-1) & 0x3c0) << 21;
|
|
}
|
|
tilcdc_write(dev, LCDC_RASTER_TIMING_2_REG, reg);
|
|
|
|
reg = (((mode->hdisplay >> 4) - 1) << 4) |
|
|
(((hbp-1) & 0xff) << 24) |
|
|
(((hfp-1) & 0xff) << 16) |
|
|
(((hsw-1) & 0x3f) << 10);
|
|
if (priv->rev == 2)
|
|
reg |= (((mode->hdisplay >> 4) - 1) & 0x40) >> 3;
|
|
tilcdc_write(dev, LCDC_RASTER_TIMING_0_REG, reg);
|
|
|
|
reg = ((mode->vdisplay - 1) & 0x3ff) |
|
|
((vbp & 0xff) << 24) |
|
|
((vfp & 0xff) << 16) |
|
|
(((vsw-1) & 0x3f) << 10);
|
|
tilcdc_write(dev, LCDC_RASTER_TIMING_1_REG, reg);
|
|
|
|
/*
|
|
* be sure to set Bit 10 for the V2 LCDC controller,
|
|
* otherwise limited to 1024 pixels width, stopping
|
|
* 1920x1080 being supported.
|
|
*/
|
|
if (priv->rev == 2) {
|
|
if ((mode->vdisplay - 1) & 0x400) {
|
|
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG,
|
|
LCDC_LPP_B10);
|
|
} else {
|
|
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG,
|
|
LCDC_LPP_B10);
|
|
}
|
|
}
|
|
|
|
/* Configure display type: */
|
|
reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG) &
|
|
~(LCDC_TFT_MODE | LCDC_MONO_8BIT_MODE | LCDC_MONOCHROME_MODE |
|
|
LCDC_V2_TFT_24BPP_MODE | LCDC_V2_TFT_24BPP_UNPACK |
|
|
0x000ff000 /* Palette Loading Delay bits */);
|
|
reg |= LCDC_TFT_MODE; /* no monochrome/passive support */
|
|
if (info->tft_alt_mode)
|
|
reg |= LCDC_TFT_ALT_ENABLE;
|
|
if (priv->rev == 2) {
|
|
switch (fb->pixel_format) {
|
|
case DRM_FORMAT_BGR565:
|
|
case DRM_FORMAT_RGB565:
|
|
break;
|
|
case DRM_FORMAT_XBGR8888:
|
|
case DRM_FORMAT_XRGB8888:
|
|
reg |= LCDC_V2_TFT_24BPP_UNPACK;
|
|
/* fallthrough */
|
|
case DRM_FORMAT_BGR888:
|
|
case DRM_FORMAT_RGB888:
|
|
reg |= LCDC_V2_TFT_24BPP_MODE;
|
|
break;
|
|
default:
|
|
dev_err(dev->dev, "invalid pixel format\n");
|
|
return;
|
|
}
|
|
}
|
|
reg |= info->fdd < 12;
|
|
tilcdc_write(dev, LCDC_RASTER_CTRL_REG, reg);
|
|
|
|
if (info->invert_pxl_clk)
|
|
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
|
|
else
|
|
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
|
|
|
|
if (info->sync_ctrl)
|
|
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
|
|
else
|
|
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
|
|
|
|
if (info->sync_edge)
|
|
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
|
|
else
|
|
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
|
|
|
|
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
|
|
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
|
|
else
|
|
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
|
|
|
|
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
|
|
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
|
|
else
|
|
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
|
|
|
|
if (info->raster_order)
|
|
tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
|
|
else
|
|
tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
|
|
|
|
drm_framebuffer_reference(fb);
|
|
|
|
set_scanout(crtc, fb);
|
|
|
|
tilcdc_crtc_set_clk(crtc);
|
|
|
|
crtc->hwmode = crtc->state->adjusted_mode;
|
|
}
|
|
|
|
static int tilcdc_crtc_atomic_check(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *state)
|
|
{
|
|
struct drm_display_mode *mode = &state->mode;
|
|
int ret;
|
|
|
|
/* If we are not active we don't care */
|
|
if (!state->active)
|
|
return 0;
|
|
|
|
if (state->state->planes[0].ptr != crtc->primary ||
|
|
state->state->planes[0].state == NULL ||
|
|
state->state->planes[0].state->crtc != crtc) {
|
|
dev_dbg(crtc->dev->dev, "CRTC primary plane must be present");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = tilcdc_crtc_mode_valid(crtc, mode);
|
|
if (ret) {
|
|
dev_dbg(crtc->dev->dev, "Mode \"%s\" not valid", mode->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_crtc_funcs tilcdc_crtc_funcs = {
|
|
.destroy = tilcdc_crtc_destroy,
|
|
.set_config = drm_atomic_helper_set_config,
|
|
.page_flip = drm_atomic_helper_page_flip,
|
|
.reset = drm_atomic_helper_crtc_reset,
|
|
.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
|
|
.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
|
|
};
|
|
|
|
static const struct drm_crtc_helper_funcs tilcdc_crtc_helper_funcs = {
|
|
.mode_fixup = tilcdc_crtc_mode_fixup,
|
|
.enable = tilcdc_crtc_enable,
|
|
.disable = tilcdc_crtc_disable,
|
|
.atomic_check = tilcdc_crtc_atomic_check,
|
|
.mode_set_nofb = tilcdc_crtc_mode_set_nofb,
|
|
};
|
|
|
|
int tilcdc_crtc_max_width(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
int max_width = 0;
|
|
|
|
if (priv->rev == 1)
|
|
max_width = 1024;
|
|
else if (priv->rev == 2)
|
|
max_width = 2048;
|
|
|
|
return max_width;
|
|
}
|
|
|
|
int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode)
|
|
{
|
|
struct tilcdc_drm_private *priv = crtc->dev->dev_private;
|
|
unsigned int bandwidth;
|
|
uint32_t hbp, hfp, hsw, vbp, vfp, vsw;
|
|
|
|
/*
|
|
* check to see if the width is within the range that
|
|
* the LCD Controller physically supports
|
|
*/
|
|
if (mode->hdisplay > tilcdc_crtc_max_width(crtc))
|
|
return MODE_VIRTUAL_X;
|
|
|
|
/* width must be multiple of 16 */
|
|
if (mode->hdisplay & 0xf)
|
|
return MODE_VIRTUAL_X;
|
|
|
|
if (mode->vdisplay > 2048)
|
|
return MODE_VIRTUAL_Y;
|
|
|
|
DBG("Processing mode %dx%d@%d with pixel clock %d",
|
|
mode->hdisplay, mode->vdisplay,
|
|
drm_mode_vrefresh(mode), mode->clock);
|
|
|
|
hbp = mode->htotal - mode->hsync_end;
|
|
hfp = mode->hsync_start - mode->hdisplay;
|
|
hsw = mode->hsync_end - mode->hsync_start;
|
|
vbp = mode->vtotal - mode->vsync_end;
|
|
vfp = mode->vsync_start - mode->vdisplay;
|
|
vsw = mode->vsync_end - mode->vsync_start;
|
|
|
|
if ((hbp-1) & ~0x3ff) {
|
|
DBG("Pruning mode: Horizontal Back Porch out of range");
|
|
return MODE_HBLANK_WIDE;
|
|
}
|
|
|
|
if ((hfp-1) & ~0x3ff) {
|
|
DBG("Pruning mode: Horizontal Front Porch out of range");
|
|
return MODE_HBLANK_WIDE;
|
|
}
|
|
|
|
if ((hsw-1) & ~0x3ff) {
|
|
DBG("Pruning mode: Horizontal Sync Width out of range");
|
|
return MODE_HSYNC_WIDE;
|
|
}
|
|
|
|
if (vbp & ~0xff) {
|
|
DBG("Pruning mode: Vertical Back Porch out of range");
|
|
return MODE_VBLANK_WIDE;
|
|
}
|
|
|
|
if (vfp & ~0xff) {
|
|
DBG("Pruning mode: Vertical Front Porch out of range");
|
|
return MODE_VBLANK_WIDE;
|
|
}
|
|
|
|
if ((vsw-1) & ~0x3f) {
|
|
DBG("Pruning mode: Vertical Sync Width out of range");
|
|
return MODE_VSYNC_WIDE;
|
|
}
|
|
|
|
/*
|
|
* some devices have a maximum allowed pixel clock
|
|
* configured from the DT
|
|
*/
|
|
if (mode->clock > priv->max_pixelclock) {
|
|
DBG("Pruning mode: pixel clock too high");
|
|
return MODE_CLOCK_HIGH;
|
|
}
|
|
|
|
/*
|
|
* some devices further limit the max horizontal resolution
|
|
* configured from the DT
|
|
*/
|
|
if (mode->hdisplay > priv->max_width)
|
|
return MODE_BAD_WIDTH;
|
|
|
|
/* filter out modes that would require too much memory bandwidth: */
|
|
bandwidth = mode->hdisplay * mode->vdisplay *
|
|
drm_mode_vrefresh(mode);
|
|
if (bandwidth > priv->max_bandwidth) {
|
|
DBG("Pruning mode: exceeds defined bandwidth limit");
|
|
return MODE_BAD;
|
|
}
|
|
|
|
return MODE_OK;
|
|
}
|
|
|
|
void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
|
|
const struct tilcdc_panel_info *info)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
tilcdc_crtc->info = info;
|
|
}
|
|
|
|
void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc,
|
|
bool simulate_vesa_sync)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
|
|
tilcdc_crtc->simulate_vesa_sync = simulate_vesa_sync;
|
|
}
|
|
|
|
void tilcdc_crtc_update_clk(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
|
|
drm_modeset_lock_crtc(crtc, NULL);
|
|
if (tilcdc_crtc->lcd_fck_rate != clk_get_rate(priv->clk)) {
|
|
if (tilcdc_crtc_is_on(crtc)) {
|
|
pm_runtime_get_sync(dev->dev);
|
|
tilcdc_crtc_disable(crtc);
|
|
|
|
tilcdc_crtc_set_clk(crtc);
|
|
|
|
tilcdc_crtc_enable(crtc);
|
|
pm_runtime_put_sync(dev->dev);
|
|
}
|
|
}
|
|
drm_modeset_unlock_crtc(crtc);
|
|
}
|
|
|
|
#define SYNC_LOST_COUNT_LIMIT 50
|
|
|
|
irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
uint32_t stat;
|
|
|
|
stat = tilcdc_read_irqstatus(dev);
|
|
tilcdc_clear_irqstatus(dev, stat);
|
|
|
|
if (stat & LCDC_END_OF_FRAME0) {
|
|
unsigned long flags;
|
|
bool skip_event = false;
|
|
ktime_t now;
|
|
|
|
now = ktime_get();
|
|
|
|
drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq);
|
|
|
|
spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
|
|
|
|
tilcdc_crtc->last_vblank = now;
|
|
|
|
if (tilcdc_crtc->next_fb) {
|
|
set_scanout(crtc, tilcdc_crtc->next_fb);
|
|
tilcdc_crtc->next_fb = NULL;
|
|
skip_event = true;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
|
|
|
|
drm_crtc_handle_vblank(crtc);
|
|
|
|
if (!skip_event) {
|
|
struct drm_pending_vblank_event *event;
|
|
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
|
|
event = tilcdc_crtc->event;
|
|
tilcdc_crtc->event = NULL;
|
|
if (event)
|
|
drm_crtc_send_vblank_event(crtc, event);
|
|
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
}
|
|
|
|
if (tilcdc_crtc->frame_intact)
|
|
tilcdc_crtc->sync_lost_count = 0;
|
|
else
|
|
tilcdc_crtc->frame_intact = true;
|
|
}
|
|
|
|
if (stat & LCDC_FIFO_UNDERFLOW)
|
|
dev_err_ratelimited(dev->dev, "%s(0x%08x): FIFO underfow",
|
|
__func__, stat);
|
|
|
|
/* For revision 2 only */
|
|
if (priv->rev == 2) {
|
|
if (stat & LCDC_FRAME_DONE) {
|
|
tilcdc_crtc->frame_done = true;
|
|
wake_up(&tilcdc_crtc->frame_done_wq);
|
|
}
|
|
|
|
if (stat & LCDC_SYNC_LOST) {
|
|
dev_err_ratelimited(dev->dev, "%s(0x%08x): Sync lost",
|
|
__func__, stat);
|
|
tilcdc_crtc->frame_intact = false;
|
|
if (tilcdc_crtc->sync_lost_count++ >
|
|
SYNC_LOST_COUNT_LIMIT) {
|
|
dev_err(dev->dev, "%s(0x%08x): Sync lost flood detected, disabling the interrupt", __func__, stat);
|
|
tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
|
|
LCDC_SYNC_LOST);
|
|
}
|
|
}
|
|
|
|
/* Indicate to LCDC that the interrupt service routine has
|
|
* completed, see 13.3.6.1.6 in AM335x TRM.
|
|
*/
|
|
tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev)
|
|
{
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
struct tilcdc_crtc *tilcdc_crtc;
|
|
struct drm_crtc *crtc;
|
|
int ret;
|
|
|
|
tilcdc_crtc = devm_kzalloc(dev->dev, sizeof(*tilcdc_crtc), GFP_KERNEL);
|
|
if (!tilcdc_crtc) {
|
|
dev_err(dev->dev, "allocation failed\n");
|
|
return NULL;
|
|
}
|
|
|
|
crtc = &tilcdc_crtc->base;
|
|
|
|
ret = tilcdc_plane_init(dev, &tilcdc_crtc->primary);
|
|
if (ret < 0)
|
|
goto fail;
|
|
|
|
init_waitqueue_head(&tilcdc_crtc->frame_done_wq);
|
|
|
|
drm_flip_work_init(&tilcdc_crtc->unref_work,
|
|
"unref", unref_worker);
|
|
|
|
spin_lock_init(&tilcdc_crtc->irq_lock);
|
|
|
|
ret = drm_crtc_init_with_planes(dev, crtc,
|
|
&tilcdc_crtc->primary,
|
|
NULL,
|
|
&tilcdc_crtc_funcs,
|
|
"tilcdc crtc");
|
|
if (ret < 0)
|
|
goto fail;
|
|
|
|
drm_crtc_helper_add(crtc, &tilcdc_crtc_helper_funcs);
|
|
|
|
if (priv->is_componentized) {
|
|
struct device_node *ports =
|
|
of_get_child_by_name(dev->dev->of_node, "ports");
|
|
|
|
if (ports) {
|
|
crtc->port = of_get_child_by_name(ports, "port");
|
|
of_node_put(ports);
|
|
} else {
|
|
crtc->port =
|
|
of_get_child_by_name(dev->dev->of_node, "port");
|
|
}
|
|
if (!crtc->port) { /* This should never happen */
|
|
dev_err(dev->dev, "Port node not found in %s\n",
|
|
dev->dev->of_node->full_name);
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
return crtc;
|
|
|
|
fail:
|
|
tilcdc_crtc_destroy(crtc);
|
|
return NULL;
|
|
}
|