mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 09:56:40 +07:00
547dd1e089
Current imx53_pm_init() implementation is incomplete as it lacks calling suspend_set_ops(). Use a single imx5_pm_init() function to handle both mx51 and mx53. This allows mx53 to enter in low-power mode. Tested on a mx53qsb: root@freescale /$ echo mem > /sys/power/state PM: Syncing filesystems ... done. mmc0: card e624 removed Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) ... (Press Power button) PM: suspend of devices complete after 17.067 msecs PM: suspend devices took 0.020 seconds PM: late suspend of devices complete after 0.954 msecs PM: noirq suspend of devices complete after 1.288 msecs Disabling non-boot CPUs ... PM: noirq resume of devices complete after 0.680 msecs PM: early resume of devices complete after 0.914 msecs PM: resume of devices complete after 44.955 msecs PM: resume devices took 0.050 seconds Restarting tasks ... done. mmc0: host does not support reading read-only switch. assuming write-enable. mmc0: new SDHC card at address e624 mmcblk0: mmc0:e624 SU04G 3.69 GiB mmcblk0: p1 p2 p3 libphy: 63fec000.etherne:00 - Link is Down libphy: 63fec000.etherne:00 - Link is Up - 100/Full root@freescale /$ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
178 lines
4.4 KiB
C
178 lines
4.4 KiB
C
/*
|
|
* Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
#include <linux/suspend.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/err.h>
|
|
#include <linux/export.h>
|
|
#include <asm/cacheflush.h>
|
|
#include <asm/system_misc.h>
|
|
#include <asm/tlbflush.h>
|
|
|
|
#include "common.h"
|
|
#include "cpuidle.h"
|
|
#include "crm-regs-imx5.h"
|
|
#include "hardware.h"
|
|
|
|
/*
|
|
* The WAIT_UNCLOCKED_POWER_OFF state only requires <= 500ns to exit.
|
|
* This is also the lowest power state possible without affecting
|
|
* non-cpu parts of the system. For these reasons, imx5 should default
|
|
* to always using this state for cpu idling. The PM_SUSPEND_STANDBY also
|
|
* uses this state and needs to take no action when registers remain confgiured
|
|
* for this state.
|
|
*/
|
|
#define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF
|
|
|
|
/*
|
|
* set cpu low power mode before WFI instruction. This function is called
|
|
* mx5 because it can be used for mx51, and mx53.
|
|
*/
|
|
static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
|
|
{
|
|
u32 plat_lpc, arm_srpgcr, ccm_clpcr;
|
|
u32 empgc0, empgc1;
|
|
int stop_mode = 0;
|
|
|
|
/* always allow platform to issue a deep sleep mode request */
|
|
plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) &
|
|
~(MXC_CORTEXA8_PLAT_LPC_DSM);
|
|
ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK);
|
|
arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR);
|
|
empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR);
|
|
empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR);
|
|
|
|
switch (mode) {
|
|
case WAIT_CLOCKED:
|
|
break;
|
|
case WAIT_UNCLOCKED:
|
|
ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
|
|
break;
|
|
case WAIT_UNCLOCKED_POWER_OFF:
|
|
case STOP_POWER_OFF:
|
|
plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM
|
|
| MXC_CORTEXA8_PLAT_LPC_DBG_DSM;
|
|
if (mode == WAIT_UNCLOCKED_POWER_OFF) {
|
|
ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
|
|
ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY;
|
|
ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS;
|
|
stop_mode = 0;
|
|
} else {
|
|
ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
|
|
ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET;
|
|
ccm_clpcr |= MXC_CCM_CLPCR_VSTBY;
|
|
ccm_clpcr |= MXC_CCM_CLPCR_SBYOS;
|
|
stop_mode = 1;
|
|
}
|
|
arm_srpgcr |= MXC_SRPGCR_PCR;
|
|
break;
|
|
case STOP_POWER_ON:
|
|
ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode);
|
|
return;
|
|
}
|
|
|
|
__raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
|
|
__raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
|
|
__raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
|
|
__raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
|
|
|
|
if (stop_mode) {
|
|
empgc0 |= MXC_SRPGCR_PCR;
|
|
empgc1 |= MXC_SRPGCR_PCR;
|
|
|
|
__raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR);
|
|
__raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
|
|
}
|
|
}
|
|
|
|
static int mx5_suspend_enter(suspend_state_t state)
|
|
{
|
|
switch (state) {
|
|
case PM_SUSPEND_MEM:
|
|
mx5_cpu_lp_set(STOP_POWER_OFF);
|
|
break;
|
|
case PM_SUSPEND_STANDBY:
|
|
/* DEFAULT_IDLE_STATE already configured */
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (state == PM_SUSPEND_MEM) {
|
|
local_flush_tlb_all();
|
|
flush_cache_all();
|
|
|
|
/*clear the EMPGC0/1 bits */
|
|
__raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
|
|
__raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
|
|
}
|
|
cpu_do_idle();
|
|
|
|
/* return registers to default idle state */
|
|
mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
|
|
return 0;
|
|
}
|
|
|
|
static int mx5_pm_valid(suspend_state_t state)
|
|
{
|
|
return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
|
|
}
|
|
|
|
static const struct platform_suspend_ops mx5_suspend_ops = {
|
|
.valid = mx5_pm_valid,
|
|
.enter = mx5_suspend_enter,
|
|
};
|
|
|
|
static inline int imx5_cpu_do_idle(void)
|
|
{
|
|
int ret = tzic_enable_wake();
|
|
|
|
if (likely(!ret))
|
|
cpu_do_idle();
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void imx5_pm_idle(void)
|
|
{
|
|
imx5_cpu_do_idle();
|
|
}
|
|
|
|
static int __init imx5_pm_common_init(void)
|
|
{
|
|
int ret;
|
|
struct clk *gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
|
|
|
|
if (IS_ERR(gpc_dvfs_clk))
|
|
return PTR_ERR(gpc_dvfs_clk);
|
|
|
|
ret = clk_prepare_enable(gpc_dvfs_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
arm_pm_idle = imx5_pm_idle;
|
|
|
|
/* Set the registers to the default cpu idle state. */
|
|
mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
|
|
|
|
return imx5_cpuidle_init();
|
|
}
|
|
|
|
void __init imx5_pm_init(void)
|
|
{
|
|
int ret = imx5_pm_common_init();
|
|
if (!ret)
|
|
suspend_set_ops(&mx5_suspend_ops);
|
|
}
|