mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-06 04:46:39 +07:00
4909cc2b89
It's a NOOP since 2.6.35 and it will be removed one day. [jejb: remove from missed arm scsi drivers] Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
834 lines
21 KiB
C
834 lines
21 KiB
C
/*
|
|
* Adaptec AAC series RAID controller driver
|
|
* (c) Copyright 2001 Red Hat Inc.
|
|
*
|
|
* based on the old aacraid driver that is..
|
|
* Adaptec aacraid device driver for Linux.
|
|
*
|
|
* Copyright (c) 2000-2010 Adaptec, Inc.
|
|
* 2010 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Module Name:
|
|
* src.c
|
|
*
|
|
* Abstract: Hardware Device Interface for PMC SRC based controllers
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/time.h>
|
|
#include <linux/interrupt.h>
|
|
#include <scsi/scsi_host.h>
|
|
|
|
#include "aacraid.h"
|
|
|
|
static irqreturn_t aac_src_intr_message(int irq, void *dev_id)
|
|
{
|
|
struct aac_dev *dev = dev_id;
|
|
unsigned long bellbits, bellbits_shifted;
|
|
int our_interrupt = 0;
|
|
int isFastResponse;
|
|
u32 index, handle;
|
|
|
|
bellbits = src_readl(dev, MUnit.ODR_R);
|
|
if (bellbits & PmDoorBellResponseSent) {
|
|
bellbits = PmDoorBellResponseSent;
|
|
/* handle async. status */
|
|
src_writel(dev, MUnit.ODR_C, bellbits);
|
|
src_readl(dev, MUnit.ODR_C);
|
|
our_interrupt = 1;
|
|
index = dev->host_rrq_idx;
|
|
for (;;) {
|
|
isFastResponse = 0;
|
|
/* remove toggle bit (31) */
|
|
handle = le32_to_cpu(dev->host_rrq[index]) & 0x7fffffff;
|
|
/* check fast response bit (30) */
|
|
if (handle & 0x40000000)
|
|
isFastResponse = 1;
|
|
handle &= 0x0000ffff;
|
|
if (handle == 0)
|
|
break;
|
|
|
|
aac_intr_normal(dev, handle-1, 0, isFastResponse, NULL);
|
|
|
|
dev->host_rrq[index++] = 0;
|
|
if (index == dev->scsi_host_ptr->can_queue +
|
|
AAC_NUM_MGT_FIB)
|
|
index = 0;
|
|
dev->host_rrq_idx = index;
|
|
}
|
|
} else {
|
|
bellbits_shifted = (bellbits >> SRC_ODR_SHIFT);
|
|
if (bellbits_shifted & DoorBellAifPending) {
|
|
src_writel(dev, MUnit.ODR_C, bellbits);
|
|
src_readl(dev, MUnit.ODR_C);
|
|
our_interrupt = 1;
|
|
/* handle AIF */
|
|
aac_intr_normal(dev, 0, 2, 0, NULL);
|
|
} else if (bellbits_shifted & OUTBOUNDDOORBELL_0) {
|
|
unsigned long sflags;
|
|
struct list_head *entry;
|
|
int send_it = 0;
|
|
extern int aac_sync_mode;
|
|
|
|
src_writel(dev, MUnit.ODR_C, bellbits);
|
|
src_readl(dev, MUnit.ODR_C);
|
|
|
|
if (!aac_sync_mode) {
|
|
src_writel(dev, MUnit.ODR_C, bellbits);
|
|
src_readl(dev, MUnit.ODR_C);
|
|
our_interrupt = 1;
|
|
}
|
|
|
|
if (dev->sync_fib) {
|
|
our_interrupt = 1;
|
|
if (dev->sync_fib->callback)
|
|
dev->sync_fib->callback(dev->sync_fib->callback_data,
|
|
dev->sync_fib);
|
|
spin_lock_irqsave(&dev->sync_fib->event_lock, sflags);
|
|
if (dev->sync_fib->flags & FIB_CONTEXT_FLAG_WAIT) {
|
|
dev->management_fib_count--;
|
|
up(&dev->sync_fib->event_wait);
|
|
}
|
|
spin_unlock_irqrestore(&dev->sync_fib->event_lock, sflags);
|
|
spin_lock_irqsave(&dev->sync_lock, sflags);
|
|
if (!list_empty(&dev->sync_fib_list)) {
|
|
entry = dev->sync_fib_list.next;
|
|
dev->sync_fib = list_entry(entry, struct fib, fiblink);
|
|
list_del(entry);
|
|
send_it = 1;
|
|
} else {
|
|
dev->sync_fib = NULL;
|
|
}
|
|
spin_unlock_irqrestore(&dev->sync_lock, sflags);
|
|
if (send_it) {
|
|
aac_adapter_sync_cmd(dev, SEND_SYNCHRONOUS_FIB,
|
|
(u32)dev->sync_fib->hw_fib_pa, 0, 0, 0, 0, 0,
|
|
NULL, NULL, NULL, NULL, NULL);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (our_interrupt) {
|
|
return IRQ_HANDLED;
|
|
}
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/**
|
|
* aac_src_disable_interrupt - Disable interrupts
|
|
* @dev: Adapter
|
|
*/
|
|
|
|
static void aac_src_disable_interrupt(struct aac_dev *dev)
|
|
{
|
|
src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff);
|
|
}
|
|
|
|
/**
|
|
* aac_src_enable_interrupt_message - Enable interrupts
|
|
* @dev: Adapter
|
|
*/
|
|
|
|
static void aac_src_enable_interrupt_message(struct aac_dev *dev)
|
|
{
|
|
src_writel(dev, MUnit.OIMR, dev->OIMR = 0xfffffff8);
|
|
}
|
|
|
|
/**
|
|
* src_sync_cmd - send a command and wait
|
|
* @dev: Adapter
|
|
* @command: Command to execute
|
|
* @p1: first parameter
|
|
* @ret: adapter status
|
|
*
|
|
* This routine will send a synchronous command to the adapter and wait
|
|
* for its completion.
|
|
*/
|
|
|
|
static int src_sync_cmd(struct aac_dev *dev, u32 command,
|
|
u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
|
|
u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4)
|
|
{
|
|
unsigned long start;
|
|
int ok;
|
|
|
|
/*
|
|
* Write the command into Mailbox 0
|
|
*/
|
|
writel(command, &dev->IndexRegs->Mailbox[0]);
|
|
/*
|
|
* Write the parameters into Mailboxes 1 - 6
|
|
*/
|
|
writel(p1, &dev->IndexRegs->Mailbox[1]);
|
|
writel(p2, &dev->IndexRegs->Mailbox[2]);
|
|
writel(p3, &dev->IndexRegs->Mailbox[3]);
|
|
writel(p4, &dev->IndexRegs->Mailbox[4]);
|
|
|
|
/*
|
|
* Clear the synch command doorbell to start on a clean slate.
|
|
*/
|
|
src_writel(dev, MUnit.ODR_C, OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
|
|
|
|
/*
|
|
* Disable doorbell interrupts
|
|
*/
|
|
src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff);
|
|
|
|
/*
|
|
* Force the completion of the mask register write before issuing
|
|
* the interrupt.
|
|
*/
|
|
src_readl(dev, MUnit.OIMR);
|
|
|
|
/*
|
|
* Signal that there is a new synch command
|
|
*/
|
|
src_writel(dev, MUnit.IDR, INBOUNDDOORBELL_0 << SRC_IDR_SHIFT);
|
|
|
|
if (!dev->sync_mode || command != SEND_SYNCHRONOUS_FIB) {
|
|
ok = 0;
|
|
start = jiffies;
|
|
|
|
/*
|
|
* Wait up to 5 minutes
|
|
*/
|
|
while (time_before(jiffies, start+300*HZ)) {
|
|
udelay(5); /* Delay 5 microseconds to let Mon960 get info. */
|
|
/*
|
|
* Mon960 will set doorbell0 bit when it has completed the command.
|
|
*/
|
|
if ((src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT) & OUTBOUNDDOORBELL_0) {
|
|
/*
|
|
* Clear the doorbell.
|
|
*/
|
|
src_writel(dev, MUnit.ODR_C, OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
|
|
ok = 1;
|
|
break;
|
|
}
|
|
/*
|
|
* Yield the processor in case we are slow
|
|
*/
|
|
msleep(1);
|
|
}
|
|
if (unlikely(ok != 1)) {
|
|
/*
|
|
* Restore interrupt mask even though we timed out
|
|
*/
|
|
aac_adapter_enable_int(dev);
|
|
return -ETIMEDOUT;
|
|
}
|
|
/*
|
|
* Pull the synch status from Mailbox 0.
|
|
*/
|
|
if (status)
|
|
*status = readl(&dev->IndexRegs->Mailbox[0]);
|
|
if (r1)
|
|
*r1 = readl(&dev->IndexRegs->Mailbox[1]);
|
|
if (r2)
|
|
*r2 = readl(&dev->IndexRegs->Mailbox[2]);
|
|
if (r3)
|
|
*r3 = readl(&dev->IndexRegs->Mailbox[3]);
|
|
if (r4)
|
|
*r4 = readl(&dev->IndexRegs->Mailbox[4]);
|
|
|
|
/*
|
|
* Clear the synch command doorbell.
|
|
*/
|
|
src_writel(dev, MUnit.ODR_C, OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
|
|
}
|
|
|
|
/*
|
|
* Restore interrupt mask
|
|
*/
|
|
aac_adapter_enable_int(dev);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* aac_src_interrupt_adapter - interrupt adapter
|
|
* @dev: Adapter
|
|
*
|
|
* Send an interrupt to the i960 and breakpoint it.
|
|
*/
|
|
|
|
static void aac_src_interrupt_adapter(struct aac_dev *dev)
|
|
{
|
|
src_sync_cmd(dev, BREAKPOINT_REQUEST,
|
|
0, 0, 0, 0, 0, 0,
|
|
NULL, NULL, NULL, NULL, NULL);
|
|
}
|
|
|
|
/**
|
|
* aac_src_notify_adapter - send an event to the adapter
|
|
* @dev: Adapter
|
|
* @event: Event to send
|
|
*
|
|
* Notify the i960 that something it probably cares about has
|
|
* happened.
|
|
*/
|
|
|
|
static void aac_src_notify_adapter(struct aac_dev *dev, u32 event)
|
|
{
|
|
switch (event) {
|
|
|
|
case AdapNormCmdQue:
|
|
src_writel(dev, MUnit.ODR_C,
|
|
INBOUNDDOORBELL_1 << SRC_ODR_SHIFT);
|
|
break;
|
|
case HostNormRespNotFull:
|
|
src_writel(dev, MUnit.ODR_C,
|
|
INBOUNDDOORBELL_4 << SRC_ODR_SHIFT);
|
|
break;
|
|
case AdapNormRespQue:
|
|
src_writel(dev, MUnit.ODR_C,
|
|
INBOUNDDOORBELL_2 << SRC_ODR_SHIFT);
|
|
break;
|
|
case HostNormCmdNotFull:
|
|
src_writel(dev, MUnit.ODR_C,
|
|
INBOUNDDOORBELL_3 << SRC_ODR_SHIFT);
|
|
break;
|
|
case FastIo:
|
|
src_writel(dev, MUnit.ODR_C,
|
|
INBOUNDDOORBELL_6 << SRC_ODR_SHIFT);
|
|
break;
|
|
case AdapPrintfDone:
|
|
src_writel(dev, MUnit.ODR_C,
|
|
INBOUNDDOORBELL_5 << SRC_ODR_SHIFT);
|
|
break;
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* aac_src_start_adapter - activate adapter
|
|
* @dev: Adapter
|
|
*
|
|
* Start up processing on an i960 based AAC adapter
|
|
*/
|
|
|
|
static void aac_src_start_adapter(struct aac_dev *dev)
|
|
{
|
|
struct aac_init *init;
|
|
|
|
/* reset host_rrq_idx first */
|
|
dev->host_rrq_idx = 0;
|
|
|
|
init = dev->init;
|
|
init->HostElapsedSeconds = cpu_to_le32(get_seconds());
|
|
|
|
/* We can only use a 32 bit address here */
|
|
src_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
|
|
0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
|
|
}
|
|
|
|
/**
|
|
* aac_src_check_health
|
|
* @dev: device to check if healthy
|
|
*
|
|
* Will attempt to determine if the specified adapter is alive and
|
|
* capable of handling requests, returning 0 if alive.
|
|
*/
|
|
static int aac_src_check_health(struct aac_dev *dev)
|
|
{
|
|
u32 status = src_readl(dev, MUnit.OMR);
|
|
|
|
/*
|
|
* Check to see if the board failed any self tests.
|
|
*/
|
|
if (unlikely(status & SELF_TEST_FAILED))
|
|
return -1;
|
|
|
|
/*
|
|
* Check to see if the board panic'd.
|
|
*/
|
|
if (unlikely(status & KERNEL_PANIC))
|
|
return (status >> 16) & 0xFF;
|
|
/*
|
|
* Wait for the adapter to be up and running.
|
|
*/
|
|
if (unlikely(!(status & KERNEL_UP_AND_RUNNING)))
|
|
return -3;
|
|
/*
|
|
* Everything is OK
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* aac_src_deliver_message
|
|
* @fib: fib to issue
|
|
*
|
|
* Will send a fib, returning 0 if successful.
|
|
*/
|
|
static int aac_src_deliver_message(struct fib *fib)
|
|
{
|
|
struct aac_dev *dev = fib->dev;
|
|
struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue];
|
|
unsigned long qflags;
|
|
u32 fibsize;
|
|
dma_addr_t address;
|
|
struct aac_fib_xporthdr *pFibX;
|
|
u16 hdr_size = le16_to_cpu(fib->hw_fib_va->header.Size);
|
|
|
|
spin_lock_irqsave(q->lock, qflags);
|
|
q->numpending++;
|
|
spin_unlock_irqrestore(q->lock, qflags);
|
|
|
|
if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) {
|
|
/* Calculate the amount to the fibsize bits */
|
|
fibsize = (hdr_size + 127) / 128 - 1;
|
|
if (fibsize > (ALIGN32 - 1))
|
|
return -EMSGSIZE;
|
|
/* New FIB header, 32-bit */
|
|
address = fib->hw_fib_pa;
|
|
fib->hw_fib_va->header.StructType = FIB_MAGIC2;
|
|
fib->hw_fib_va->header.SenderFibAddress = (u32)address;
|
|
fib->hw_fib_va->header.u.TimeStamp = 0;
|
|
BUG_ON(upper_32_bits(address) != 0L);
|
|
address |= fibsize;
|
|
} else {
|
|
/* Calculate the amount to the fibsize bits */
|
|
fibsize = (sizeof(struct aac_fib_xporthdr) + hdr_size + 127) / 128 - 1;
|
|
if (fibsize > (ALIGN32 - 1))
|
|
return -EMSGSIZE;
|
|
|
|
/* Fill XPORT header */
|
|
pFibX = (void *)fib->hw_fib_va - sizeof(struct aac_fib_xporthdr);
|
|
pFibX->Handle = cpu_to_le32(fib->hw_fib_va->header.Handle);
|
|
pFibX->HostAddress = cpu_to_le64(fib->hw_fib_pa);
|
|
pFibX->Size = cpu_to_le32(hdr_size);
|
|
|
|
/*
|
|
* The xport header has been 32-byte aligned for us so that fibsize
|
|
* can be masked out of this address by hardware. -- BenC
|
|
*/
|
|
address = fib->hw_fib_pa - sizeof(struct aac_fib_xporthdr);
|
|
if (address & (ALIGN32 - 1))
|
|
return -EINVAL;
|
|
address |= fibsize;
|
|
}
|
|
|
|
src_writel(dev, MUnit.IQ_H, upper_32_bits(address) & 0xffffffff);
|
|
src_writel(dev, MUnit.IQ_L, address & 0xffffffff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* aac_src_ioremap
|
|
* @size: mapping resize request
|
|
*
|
|
*/
|
|
static int aac_src_ioremap(struct aac_dev *dev, u32 size)
|
|
{
|
|
if (!size) {
|
|
iounmap(dev->regs.src.bar1);
|
|
dev->regs.src.bar1 = NULL;
|
|
iounmap(dev->regs.src.bar0);
|
|
dev->base = dev->regs.src.bar0 = NULL;
|
|
return 0;
|
|
}
|
|
dev->regs.src.bar1 = ioremap(pci_resource_start(dev->pdev, 2),
|
|
AAC_MIN_SRC_BAR1_SIZE);
|
|
dev->base = NULL;
|
|
if (dev->regs.src.bar1 == NULL)
|
|
return -1;
|
|
dev->base = dev->regs.src.bar0 = ioremap(dev->base_start, size);
|
|
if (dev->base == NULL) {
|
|
iounmap(dev->regs.src.bar1);
|
|
dev->regs.src.bar1 = NULL;
|
|
return -1;
|
|
}
|
|
dev->IndexRegs = &((struct src_registers __iomem *)
|
|
dev->base)->u.tupelo.IndexRegs;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* aac_srcv_ioremap
|
|
* @size: mapping resize request
|
|
*
|
|
*/
|
|
static int aac_srcv_ioremap(struct aac_dev *dev, u32 size)
|
|
{
|
|
if (!size) {
|
|
iounmap(dev->regs.src.bar0);
|
|
dev->base = dev->regs.src.bar0 = NULL;
|
|
return 0;
|
|
}
|
|
dev->base = dev->regs.src.bar0 = ioremap(dev->base_start, size);
|
|
if (dev->base == NULL)
|
|
return -1;
|
|
dev->IndexRegs = &((struct src_registers __iomem *)
|
|
dev->base)->u.denali.IndexRegs;
|
|
return 0;
|
|
}
|
|
|
|
static int aac_src_restart_adapter(struct aac_dev *dev, int bled)
|
|
{
|
|
u32 var, reset_mask;
|
|
|
|
if (bled >= 0) {
|
|
if (bled)
|
|
printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n",
|
|
dev->name, dev->id, bled);
|
|
bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS,
|
|
0, 0, 0, 0, 0, 0, &var, &reset_mask, NULL, NULL, NULL);
|
|
if (bled || (var != 0x00000001))
|
|
return -EINVAL;
|
|
if (dev->supplement_adapter_info.SupportedOptions2 &
|
|
AAC_OPTION_DOORBELL_RESET) {
|
|
src_writel(dev, MUnit.IDR, reset_mask);
|
|
msleep(5000); /* Delay 5 seconds */
|
|
}
|
|
}
|
|
|
|
if (src_readl(dev, MUnit.OMR) & KERNEL_PANIC)
|
|
return -ENODEV;
|
|
|
|
if (startup_timeout < 300)
|
|
startup_timeout = 300;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* aac_src_select_comm - Select communications method
|
|
* @dev: Adapter
|
|
* @comm: communications method
|
|
*/
|
|
int aac_src_select_comm(struct aac_dev *dev, int comm)
|
|
{
|
|
switch (comm) {
|
|
case AAC_COMM_MESSAGE:
|
|
dev->a_ops.adapter_enable_int = aac_src_enable_interrupt_message;
|
|
dev->a_ops.adapter_intr = aac_src_intr_message;
|
|
dev->a_ops.adapter_deliver = aac_src_deliver_message;
|
|
break;
|
|
default:
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* aac_src_init - initialize an Cardinal Frey Bar card
|
|
* @dev: device to configure
|
|
*
|
|
*/
|
|
|
|
int aac_src_init(struct aac_dev *dev)
|
|
{
|
|
unsigned long start;
|
|
unsigned long status;
|
|
int restart = 0;
|
|
int instance = dev->id;
|
|
const char *name = dev->name;
|
|
|
|
dev->a_ops.adapter_ioremap = aac_src_ioremap;
|
|
dev->a_ops.adapter_comm = aac_src_select_comm;
|
|
|
|
dev->base_size = AAC_MIN_SRC_BAR0_SIZE;
|
|
if (aac_adapter_ioremap(dev, dev->base_size)) {
|
|
printk(KERN_WARNING "%s: unable to map adapter.\n", name);
|
|
goto error_iounmap;
|
|
}
|
|
|
|
/* Failure to reset here is an option ... */
|
|
dev->a_ops.adapter_sync_cmd = src_sync_cmd;
|
|
dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
|
|
if ((aac_reset_devices || reset_devices) &&
|
|
!aac_src_restart_adapter(dev, 0))
|
|
++restart;
|
|
/*
|
|
* Check to see if the board panic'd while booting.
|
|
*/
|
|
status = src_readl(dev, MUnit.OMR);
|
|
if (status & KERNEL_PANIC) {
|
|
if (aac_src_restart_adapter(dev, aac_src_check_health(dev)))
|
|
goto error_iounmap;
|
|
++restart;
|
|
}
|
|
/*
|
|
* Check to see if the board failed any self tests.
|
|
*/
|
|
status = src_readl(dev, MUnit.OMR);
|
|
if (status & SELF_TEST_FAILED) {
|
|
printk(KERN_ERR "%s%d: adapter self-test failed.\n",
|
|
dev->name, instance);
|
|
goto error_iounmap;
|
|
}
|
|
/*
|
|
* Check to see if the monitor panic'd while booting.
|
|
*/
|
|
if (status & MONITOR_PANIC) {
|
|
printk(KERN_ERR "%s%d: adapter monitor panic.\n",
|
|
dev->name, instance);
|
|
goto error_iounmap;
|
|
}
|
|
start = jiffies;
|
|
/*
|
|
* Wait for the adapter to be up and running. Wait up to 3 minutes
|
|
*/
|
|
while (!((status = src_readl(dev, MUnit.OMR)) &
|
|
KERNEL_UP_AND_RUNNING)) {
|
|
if ((restart &&
|
|
(status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
|
|
time_after(jiffies, start+HZ*startup_timeout)) {
|
|
printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
|
|
dev->name, instance, status);
|
|
goto error_iounmap;
|
|
}
|
|
if (!restart &&
|
|
((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
|
|
time_after(jiffies, start + HZ *
|
|
((startup_timeout > 60)
|
|
? (startup_timeout - 60)
|
|
: (startup_timeout / 2))))) {
|
|
if (likely(!aac_src_restart_adapter(dev,
|
|
aac_src_check_health(dev))))
|
|
start = jiffies;
|
|
++restart;
|
|
}
|
|
msleep(1);
|
|
}
|
|
if (restart && aac_commit)
|
|
aac_commit = 1;
|
|
/*
|
|
* Fill in the common function dispatch table.
|
|
*/
|
|
dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter;
|
|
dev->a_ops.adapter_disable_int = aac_src_disable_interrupt;
|
|
dev->a_ops.adapter_notify = aac_src_notify_adapter;
|
|
dev->a_ops.adapter_sync_cmd = src_sync_cmd;
|
|
dev->a_ops.adapter_check_health = aac_src_check_health;
|
|
dev->a_ops.adapter_restart = aac_src_restart_adapter;
|
|
|
|
/*
|
|
* First clear out all interrupts. Then enable the one's that we
|
|
* can handle.
|
|
*/
|
|
aac_adapter_comm(dev, AAC_COMM_MESSAGE);
|
|
aac_adapter_disable_int(dev);
|
|
src_writel(dev, MUnit.ODR_C, 0xffffffff);
|
|
aac_adapter_enable_int(dev);
|
|
|
|
if (aac_init_adapter(dev) == NULL)
|
|
goto error_iounmap;
|
|
if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE1)
|
|
goto error_iounmap;
|
|
|
|
dev->msi = aac_msi && !pci_enable_msi(dev->pdev);
|
|
|
|
if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
|
|
IRQF_SHARED, "aacraid", dev) < 0) {
|
|
|
|
if (dev->msi)
|
|
pci_disable_msi(dev->pdev);
|
|
|
|
printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
|
|
name, instance);
|
|
goto error_iounmap;
|
|
}
|
|
dev->dbg_base = pci_resource_start(dev->pdev, 2);
|
|
dev->dbg_base_mapped = dev->regs.src.bar1;
|
|
dev->dbg_size = AAC_MIN_SRC_BAR1_SIZE;
|
|
|
|
aac_adapter_enable_int(dev);
|
|
|
|
if (!dev->sync_mode) {
|
|
/*
|
|
* Tell the adapter that all is configured, and it can
|
|
* start accepting requests
|
|
*/
|
|
aac_src_start_adapter(dev);
|
|
}
|
|
return 0;
|
|
|
|
error_iounmap:
|
|
|
|
return -1;
|
|
}
|
|
|
|
/**
|
|
* aac_srcv_init - initialize an SRCv card
|
|
* @dev: device to configure
|
|
*
|
|
*/
|
|
|
|
int aac_srcv_init(struct aac_dev *dev)
|
|
{
|
|
unsigned long start;
|
|
unsigned long status;
|
|
int restart = 0;
|
|
int instance = dev->id;
|
|
const char *name = dev->name;
|
|
|
|
dev->a_ops.adapter_ioremap = aac_srcv_ioremap;
|
|
dev->a_ops.adapter_comm = aac_src_select_comm;
|
|
|
|
dev->base_size = AAC_MIN_SRCV_BAR0_SIZE;
|
|
if (aac_adapter_ioremap(dev, dev->base_size)) {
|
|
printk(KERN_WARNING "%s: unable to map adapter.\n", name);
|
|
goto error_iounmap;
|
|
}
|
|
|
|
/* Failure to reset here is an option ... */
|
|
dev->a_ops.adapter_sync_cmd = src_sync_cmd;
|
|
dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
|
|
if ((aac_reset_devices || reset_devices) &&
|
|
!aac_src_restart_adapter(dev, 0))
|
|
++restart;
|
|
/*
|
|
* Check to see if flash update is running.
|
|
* Wait for the adapter to be up and running. Wait up to 5 minutes
|
|
*/
|
|
status = src_readl(dev, MUnit.OMR);
|
|
if (status & FLASH_UPD_PENDING) {
|
|
start = jiffies;
|
|
do {
|
|
status = src_readl(dev, MUnit.OMR);
|
|
if (time_after(jiffies, start+HZ*FWUPD_TIMEOUT)) {
|
|
printk(KERN_ERR "%s%d: adapter flash update failed.\n",
|
|
dev->name, instance);
|
|
goto error_iounmap;
|
|
}
|
|
} while (!(status & FLASH_UPD_SUCCESS) &&
|
|
!(status & FLASH_UPD_FAILED));
|
|
/* Delay 10 seconds.
|
|
* Because right now FW is doing a soft reset,
|
|
* do not read scratch pad register at this time
|
|
*/
|
|
ssleep(10);
|
|
}
|
|
/*
|
|
* Check to see if the board panic'd while booting.
|
|
*/
|
|
status = src_readl(dev, MUnit.OMR);
|
|
if (status & KERNEL_PANIC) {
|
|
if (aac_src_restart_adapter(dev, aac_src_check_health(dev)))
|
|
goto error_iounmap;
|
|
++restart;
|
|
}
|
|
/*
|
|
* Check to see if the board failed any self tests.
|
|
*/
|
|
status = src_readl(dev, MUnit.OMR);
|
|
if (status & SELF_TEST_FAILED) {
|
|
printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
|
|
goto error_iounmap;
|
|
}
|
|
/*
|
|
* Check to see if the monitor panic'd while booting.
|
|
*/
|
|
if (status & MONITOR_PANIC) {
|
|
printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
|
|
goto error_iounmap;
|
|
}
|
|
start = jiffies;
|
|
/*
|
|
* Wait for the adapter to be up and running. Wait up to 3 minutes
|
|
*/
|
|
while (!((status = src_readl(dev, MUnit.OMR)) &
|
|
KERNEL_UP_AND_RUNNING) ||
|
|
status == 0xffffffff) {
|
|
if ((restart &&
|
|
(status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
|
|
time_after(jiffies, start+HZ*startup_timeout)) {
|
|
printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
|
|
dev->name, instance, status);
|
|
goto error_iounmap;
|
|
}
|
|
if (!restart &&
|
|
((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
|
|
time_after(jiffies, start + HZ *
|
|
((startup_timeout > 60)
|
|
? (startup_timeout - 60)
|
|
: (startup_timeout / 2))))) {
|
|
if (likely(!aac_src_restart_adapter(dev, aac_src_check_health(dev))))
|
|
start = jiffies;
|
|
++restart;
|
|
}
|
|
msleep(1);
|
|
}
|
|
if (restart && aac_commit)
|
|
aac_commit = 1;
|
|
/*
|
|
* Fill in the common function dispatch table.
|
|
*/
|
|
dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter;
|
|
dev->a_ops.adapter_disable_int = aac_src_disable_interrupt;
|
|
dev->a_ops.adapter_notify = aac_src_notify_adapter;
|
|
dev->a_ops.adapter_sync_cmd = src_sync_cmd;
|
|
dev->a_ops.adapter_check_health = aac_src_check_health;
|
|
dev->a_ops.adapter_restart = aac_src_restart_adapter;
|
|
|
|
/*
|
|
* First clear out all interrupts. Then enable the one's that we
|
|
* can handle.
|
|
*/
|
|
aac_adapter_comm(dev, AAC_COMM_MESSAGE);
|
|
aac_adapter_disable_int(dev);
|
|
src_writel(dev, MUnit.ODR_C, 0xffffffff);
|
|
aac_adapter_enable_int(dev);
|
|
|
|
if (aac_init_adapter(dev) == NULL)
|
|
goto error_iounmap;
|
|
if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE2)
|
|
goto error_iounmap;
|
|
dev->msi = aac_msi && !pci_enable_msi(dev->pdev);
|
|
if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
|
|
IRQF_SHARED, "aacraid", dev) < 0) {
|
|
if (dev->msi)
|
|
pci_disable_msi(dev->pdev);
|
|
printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
|
|
name, instance);
|
|
goto error_iounmap;
|
|
}
|
|
dev->dbg_base = dev->base_start;
|
|
dev->dbg_base_mapped = dev->base;
|
|
dev->dbg_size = dev->base_size;
|
|
|
|
aac_adapter_enable_int(dev);
|
|
|
|
if (!dev->sync_mode) {
|
|
/*
|
|
* Tell the adapter that all is configured, and it can
|
|
* start accepting requests
|
|
*/
|
|
aac_src_start_adapter(dev);
|
|
}
|
|
return 0;
|
|
|
|
error_iounmap:
|
|
|
|
return -1;
|
|
}
|
|
|