mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-26 18:30:54 +07:00
58c12bdc5d
This is needed to avoid ugly #ifdefs in drivers. Also update fsl_qe_udc driver so that now it doesn't define its own versions that cause build breakage when the generic stubs are used. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
423 lines
12 KiB
C
423 lines
12 KiB
C
/*
|
|
* drivers/usb/gadget/qe_udc.h
|
|
*
|
|
* Copyright (C) 2006-2008 Freescale Semiconductor, Inc. All rights reserved.
|
|
*
|
|
* Xiaobo Xie <X.Xie@freescale.com>
|
|
* Li Yang <leoli@freescale.com>
|
|
*
|
|
* Description:
|
|
* Freescale USB device/endpoint management registers
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*/
|
|
|
|
#ifndef __FSL_QE_UDC_H
|
|
#define __FSL_QE_UDC_H
|
|
|
|
/* SoC type */
|
|
#define PORT_CPM 0
|
|
#define PORT_QE 1
|
|
|
|
#define USB_MAX_ENDPOINTS 4
|
|
#define USB_MAX_PIPES USB_MAX_ENDPOINTS
|
|
#define USB_EP0_MAX_SIZE 64
|
|
#define USB_MAX_CTRL_PAYLOAD 0x4000
|
|
#define USB_BDRING_LEN 16
|
|
#define USB_BDRING_LEN_RX 256
|
|
#define USB_BDRING_LEN_TX 16
|
|
#define MIN_EMPTY_BDS 128
|
|
#define MAX_DATA_BDS 8
|
|
#define USB_CRC_SIZE 2
|
|
#define USB_DIR_BOTH 0x88
|
|
#define R_BUF_MAXSIZE 0x800
|
|
#define USB_EP_PARA_ALIGNMENT 32
|
|
|
|
/* USB Mode Register bit define */
|
|
#define USB_MODE_EN 0x01
|
|
#define USB_MODE_HOST 0x02
|
|
#define USB_MODE_TEST 0x04
|
|
#define USB_MODE_SFTE 0x08
|
|
#define USB_MODE_RESUME 0x40
|
|
#define USB_MODE_LSS 0x80
|
|
|
|
/* USB Slave Address Register Mask */
|
|
#define USB_SLVADDR_MASK 0x7F
|
|
|
|
/* USB Endpoint register define */
|
|
#define USB_EPNUM_MASK 0xF000
|
|
#define USB_EPNUM_SHIFT 12
|
|
|
|
#define USB_TRANS_MODE_SHIFT 8
|
|
#define USB_TRANS_CTR 0x0000
|
|
#define USB_TRANS_INT 0x0100
|
|
#define USB_TRANS_BULK 0x0200
|
|
#define USB_TRANS_ISO 0x0300
|
|
|
|
#define USB_EP_MF 0x0020
|
|
#define USB_EP_RTE 0x0010
|
|
|
|
#define USB_THS_SHIFT 2
|
|
#define USB_THS_MASK 0x000c
|
|
#define USB_THS_NORMAL 0x0
|
|
#define USB_THS_IGNORE_IN 0x0004
|
|
#define USB_THS_NACK 0x0008
|
|
#define USB_THS_STALL 0x000c
|
|
|
|
#define USB_RHS_SHIFT 0
|
|
#define USB_RHS_MASK 0x0003
|
|
#define USB_RHS_NORMAL 0x0
|
|
#define USB_RHS_IGNORE_OUT 0x0001
|
|
#define USB_RHS_NACK 0x0002
|
|
#define USB_RHS_STALL 0x0003
|
|
|
|
#define USB_RTHS_MASK 0x000f
|
|
|
|
/* USB Command Register define */
|
|
#define USB_CMD_STR_FIFO 0x80
|
|
#define USB_CMD_FLUSH_FIFO 0x40
|
|
#define USB_CMD_ISFT 0x20
|
|
#define USB_CMD_DSFT 0x10
|
|
#define USB_CMD_EP_MASK 0x03
|
|
|
|
/* USB Event and Mask Register define */
|
|
#define USB_E_MSF_MASK 0x0800
|
|
#define USB_E_SFT_MASK 0x0400
|
|
#define USB_E_RESET_MASK 0x0200
|
|
#define USB_E_IDLE_MASK 0x0100
|
|
#define USB_E_TXE4_MASK 0x0080
|
|
#define USB_E_TXE3_MASK 0x0040
|
|
#define USB_E_TXE2_MASK 0x0020
|
|
#define USB_E_TXE1_MASK 0x0010
|
|
#define USB_E_SOF_MASK 0x0008
|
|
#define USB_E_BSY_MASK 0x0004
|
|
#define USB_E_TXB_MASK 0x0002
|
|
#define USB_E_RXB_MASK 0x0001
|
|
#define USBER_ALL_CLEAR 0x0fff
|
|
|
|
#define USB_E_DEFAULT_DEVICE (USB_E_RESET_MASK | USB_E_TXE4_MASK | \
|
|
USB_E_TXE3_MASK | USB_E_TXE2_MASK | \
|
|
USB_E_TXE1_MASK | USB_E_BSY_MASK | \
|
|
USB_E_TXB_MASK | USB_E_RXB_MASK)
|
|
|
|
#define USB_E_TXE_MASK (USB_E_TXE4_MASK | USB_E_TXE3_MASK|\
|
|
USB_E_TXE2_MASK | USB_E_TXE1_MASK)
|
|
/* USB Status Register define */
|
|
#define USB_IDLE_STATUS_MASK 0x01
|
|
|
|
/* USB Start of Frame Timer */
|
|
#define USB_USSFT_MASK 0x3FFF
|
|
|
|
/* USB Frame Number Register */
|
|
#define USB_USFRN_MASK 0xFFFF
|
|
|
|
struct usb_device_para{
|
|
u16 epptr[4];
|
|
u32 rstate;
|
|
u32 rptr;
|
|
u16 frame_n;
|
|
u16 rbcnt;
|
|
u32 rtemp;
|
|
u32 rxusb_data;
|
|
u16 rxuptr;
|
|
u8 reso[2];
|
|
u32 softbl;
|
|
u8 sofucrctemp;
|
|
};
|
|
|
|
struct usb_ep_para{
|
|
u16 rbase;
|
|
u16 tbase;
|
|
u8 rbmr;
|
|
u8 tbmr;
|
|
u16 mrblr;
|
|
u16 rbptr;
|
|
u16 tbptr;
|
|
u32 tstate;
|
|
u32 tptr;
|
|
u16 tcrc;
|
|
u16 tbcnt;
|
|
u32 ttemp;
|
|
u16 txusbu_ptr;
|
|
u8 reserve[2];
|
|
};
|
|
|
|
#define USB_BUSMODE_GBL 0x20
|
|
#define USB_BUSMODE_BO_MASK 0x18
|
|
#define USB_BUSMODE_BO_SHIFT 0x3
|
|
#define USB_BUSMODE_BE 0x2
|
|
#define USB_BUSMODE_CETM 0x04
|
|
#define USB_BUSMODE_DTB 0x02
|
|
|
|
/* Endpoint basic handle */
|
|
#define ep_index(EP) ((EP)->desc->bEndpointAddress & 0xF)
|
|
#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
|
|
#define ep_is_in(EP) ((ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
|
|
USB_DIR_IN) : ((EP)->desc->bEndpointAddress \
|
|
& USB_DIR_IN) == USB_DIR_IN)
|
|
|
|
/* ep0 transfer state */
|
|
#define WAIT_FOR_SETUP 0
|
|
#define DATA_STATE_XMIT 1
|
|
#define DATA_STATE_NEED_ZLP 2
|
|
#define WAIT_FOR_OUT_STATUS 3
|
|
#define DATA_STATE_RECV 4
|
|
|
|
/* ep tramsfer mode */
|
|
#define USBP_TM_CTL 0
|
|
#define USBP_TM_ISO 1
|
|
#define USBP_TM_BULK 2
|
|
#define USBP_TM_INT 3
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
USB RX And TX DATA Frame
|
|
-----------------------------------------------------------------------------*/
|
|
struct qe_frame{
|
|
u8 *data;
|
|
u32 len;
|
|
u32 status;
|
|
u32 info;
|
|
|
|
void *privdata;
|
|
struct list_head node;
|
|
};
|
|
|
|
/* Frame structure, info field. */
|
|
#define PID_DATA0 0x80000000 /* Data toggle zero */
|
|
#define PID_DATA1 0x40000000 /* Data toggle one */
|
|
#define PID_SETUP 0x20000000 /* setup bit */
|
|
#define SETUP_STATUS 0x10000000 /* setup status bit */
|
|
#define SETADDR_STATUS 0x08000000 /* setupup address status bit */
|
|
#define NO_REQ 0x04000000 /* Frame without request */
|
|
#define HOST_DATA 0x02000000 /* Host data frame */
|
|
#define FIRST_PACKET_IN_FRAME 0x01000000 /* first packet in the frame */
|
|
#define TOKEN_FRAME 0x00800000 /* Host token frame */
|
|
#define ZLP 0x00400000 /* Zero length packet */
|
|
#define IN_TOKEN_FRAME 0x00200000 /* In token package */
|
|
#define OUT_TOKEN_FRAME 0x00100000 /* Out token package */
|
|
#define SETUP_TOKEN_FRAME 0x00080000 /* Setup token package */
|
|
#define STALL_FRAME 0x00040000 /* Stall handshake */
|
|
#define NACK_FRAME 0x00020000 /* Nack handshake */
|
|
#define NO_PID 0x00010000 /* No send PID */
|
|
#define NO_CRC 0x00008000 /* No send CRC */
|
|
#define HOST_COMMAND 0x00004000 /* Host command frame */
|
|
|
|
/* Frame status field */
|
|
/* Receive side */
|
|
#define FRAME_OK 0x00000000 /* Frame tranmitted or received OK */
|
|
#define FRAME_ERROR 0x80000000 /* Error occured on frame */
|
|
#define START_FRAME_LOST 0x40000000 /* START_FRAME_LOST */
|
|
#define END_FRAME_LOST 0x20000000 /* END_FRAME_LOST */
|
|
#define RX_ER_NONOCT 0x10000000 /* Rx Non Octet Aligned Packet */
|
|
#define RX_ER_BITSTUFF 0x08000000 /* Frame Aborted --Received packet
|
|
with bit stuff error */
|
|
#define RX_ER_CRC 0x04000000 /* Received packet with CRC error */
|
|
#define RX_ER_OVERUN 0x02000000 /* Over-run occured on reception */
|
|
#define RX_ER_PID 0x01000000 /* Wrong PID received */
|
|
/* Tranmit side */
|
|
#define TX_ER_NAK 0x00800000 /* Received NAK handshake */
|
|
#define TX_ER_STALL 0x00400000 /* Received STALL handshake */
|
|
#define TX_ER_TIMEOUT 0x00200000 /* Transmit time out */
|
|
#define TX_ER_UNDERUN 0x00100000 /* Transmit underrun */
|
|
#define FRAME_INPROGRESS 0x00080000 /* Frame is being transmitted */
|
|
#define ER_DATA_UNDERUN 0x00040000 /* Frame is shorter then expected */
|
|
#define ER_DATA_OVERUN 0x00020000 /* Frame is longer then expected */
|
|
|
|
/* QE USB frame operation functions */
|
|
#define frame_get_length(frm) (frm->len)
|
|
#define frame_set_length(frm, leng) (frm->len = leng)
|
|
#define frame_get_data(frm) (frm->data)
|
|
#define frame_set_data(frm, dat) (frm->data = dat)
|
|
#define frame_get_info(frm) (frm->info)
|
|
#define frame_set_info(frm, inf) (frm->info = inf)
|
|
#define frame_get_status(frm) (frm->status)
|
|
#define frame_set_status(frm, stat) (frm->status = stat)
|
|
#define frame_get_privdata(frm) (frm->privdata)
|
|
#define frame_set_privdata(frm, dat) (frm->privdata = dat)
|
|
|
|
static inline void qe_frame_clean(struct qe_frame *frm)
|
|
{
|
|
frame_set_data(frm, NULL);
|
|
frame_set_length(frm, 0);
|
|
frame_set_status(frm, FRAME_OK);
|
|
frame_set_info(frm, 0);
|
|
frame_set_privdata(frm, NULL);
|
|
}
|
|
|
|
static inline void qe_frame_init(struct qe_frame *frm)
|
|
{
|
|
qe_frame_clean(frm);
|
|
INIT_LIST_HEAD(&(frm->node));
|
|
}
|
|
|
|
struct qe_req {
|
|
struct usb_request req;
|
|
struct list_head queue;
|
|
/* ep_queue() func will add
|
|
a request->queue into a udc_ep->queue 'd tail */
|
|
struct qe_ep *ep;
|
|
unsigned mapped:1;
|
|
};
|
|
|
|
struct qe_ep {
|
|
struct usb_ep ep;
|
|
struct list_head queue;
|
|
struct qe_udc *udc;
|
|
const struct usb_endpoint_descriptor *desc;
|
|
struct usb_gadget *gadget;
|
|
|
|
u8 state;
|
|
|
|
struct qe_bd __iomem *rxbase;
|
|
struct qe_bd __iomem *n_rxbd;
|
|
struct qe_bd __iomem *e_rxbd;
|
|
|
|
struct qe_bd __iomem *txbase;
|
|
struct qe_bd __iomem *n_txbd;
|
|
struct qe_bd __iomem *c_txbd;
|
|
|
|
struct qe_frame *rxframe;
|
|
u8 *rxbuffer;
|
|
dma_addr_t rxbuf_d;
|
|
u8 rxbufmap;
|
|
unsigned char localnack;
|
|
int has_data;
|
|
|
|
struct qe_frame *txframe;
|
|
struct qe_req *tx_req;
|
|
int sent; /*data already sent */
|
|
int last; /*data sent in the last time*/
|
|
|
|
u8 dir;
|
|
u8 epnum;
|
|
u8 tm; /* transfer mode */
|
|
u8 data01;
|
|
u8 init;
|
|
|
|
u8 already_seen;
|
|
u8 enable_tasklet;
|
|
u8 setup_stage;
|
|
u32 last_io; /* timestamp */
|
|
|
|
char name[14];
|
|
|
|
unsigned double_buf:1;
|
|
unsigned stopped:1;
|
|
unsigned fnf:1;
|
|
unsigned has_dma:1;
|
|
|
|
u8 ackwait;
|
|
u8 dma_channel;
|
|
u16 dma_counter;
|
|
int lch;
|
|
|
|
struct timer_list timer;
|
|
};
|
|
|
|
struct qe_udc {
|
|
struct usb_gadget gadget;
|
|
struct usb_gadget_driver *driver;
|
|
struct device *dev;
|
|
struct qe_ep eps[USB_MAX_ENDPOINTS];
|
|
struct usb_ctrlrequest local_setup_buff;
|
|
spinlock_t lock; /* lock for set/config qe_udc */
|
|
unsigned long soc_type; /* QE or CPM soc */
|
|
|
|
struct qe_req *status_req; /* ep0 status request */
|
|
|
|
/* USB and EP Parameter Block pointer */
|
|
struct usb_device_para __iomem *usb_param;
|
|
struct usb_ep_para __iomem *ep_param[4];
|
|
|
|
u32 max_pipes; /* Device max pipes */
|
|
u32 max_use_endpts; /* Max endpointes to be used */
|
|
u32 bus_reset; /* Device is bus reseting */
|
|
u32 resume_state; /* USB state to resume*/
|
|
u32 usb_state; /* USB current state */
|
|
u32 usb_next_state; /* USB next state */
|
|
u32 ep0_state; /* Enpoint zero state */
|
|
u32 ep0_dir; /* Enpoint zero direction: can be
|
|
USB_DIR_IN or USB_DIR_OUT*/
|
|
u32 usb_sof_count; /* SOF count */
|
|
u32 errors; /* USB ERRORs count */
|
|
|
|
u8 *tmpbuf;
|
|
u32 c_start;
|
|
u32 c_end;
|
|
|
|
u8 *nullbuf;
|
|
u8 *statusbuf;
|
|
dma_addr_t nullp;
|
|
u8 nullmap;
|
|
u8 device_address; /* Device USB address */
|
|
|
|
unsigned int usb_clock;
|
|
unsigned int usb_irq;
|
|
struct usb_ctlr __iomem *usb_regs;
|
|
|
|
struct tasklet_struct rx_tasklet;
|
|
|
|
struct completion *done; /* to make sure release() is done */
|
|
};
|
|
|
|
#define EP_STATE_IDLE 0
|
|
#define EP_STATE_NACK 1
|
|
#define EP_STATE_STALL 2
|
|
|
|
/*
|
|
* transmit BD's status
|
|
*/
|
|
#define T_R 0x80000000 /* ready bit */
|
|
#define T_W 0x20000000 /* wrap bit */
|
|
#define T_I 0x10000000 /* interrupt on completion */
|
|
#define T_L 0x08000000 /* last */
|
|
#define T_TC 0x04000000 /* transmit CRC */
|
|
#define T_CNF 0x02000000 /* wait for transmit confirm */
|
|
#define T_LSP 0x01000000 /* Low-speed transaction */
|
|
#define T_PID 0x00c00000 /* packet id */
|
|
#define T_NAK 0x00100000 /* No ack. */
|
|
#define T_STAL 0x00080000 /* Stall recieved */
|
|
#define T_TO 0x00040000 /* time out */
|
|
#define T_UN 0x00020000 /* underrun */
|
|
|
|
#define DEVICE_T_ERROR (T_UN | T_TO)
|
|
#define HOST_T_ERROR (T_UN | T_TO | T_NAK | T_STAL)
|
|
#define DEVICE_T_BD_MASK DEVICE_T_ERROR
|
|
#define HOST_T_BD_MASK HOST_T_ERROR
|
|
|
|
#define T_PID_SHIFT 6
|
|
#define T_PID_DATA0 0x00800000 /* Data 0 toggle */
|
|
#define T_PID_DATA1 0x00c00000 /* Data 1 toggle */
|
|
|
|
/*
|
|
* receive BD's status
|
|
*/
|
|
#define R_E 0x80000000 /* buffer empty */
|
|
#define R_W 0x20000000 /* wrap bit */
|
|
#define R_I 0x10000000 /* interrupt on reception */
|
|
#define R_L 0x08000000 /* last */
|
|
#define R_F 0x04000000 /* first */
|
|
#define R_PID 0x00c00000 /* packet id */
|
|
#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */
|
|
#define R_AB 0x00080000 /* Frame Aborted */
|
|
#define R_CR 0x00040000 /* CRC Error */
|
|
#define R_OV 0x00020000 /* Overrun */
|
|
|
|
#define R_ERROR (R_NO | R_AB | R_CR | R_OV)
|
|
#define R_BD_MASK R_ERROR
|
|
|
|
#define R_PID_DATA0 0x00000000
|
|
#define R_PID_DATA1 0x00400000
|
|
#define R_PID_SETUP 0x00800000
|
|
|
|
#define CPM_USB_STOP_TX 0x2e600000
|
|
#define CPM_USB_RESTART_TX 0x2e600000
|
|
#define CPM_USB_STOP_TX_OPCODE 0x0a
|
|
#define CPM_USB_RESTART_TX_OPCODE 0x0b
|
|
#define CPM_USB_EP_SHIFT 5
|
|
|
|
#endif /* __FSL_QE_UDC_H */
|