mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 10:36:42 +07:00
1f017a9964
The optimal change would be to move the AC97 register definitions into the AC97 driver, unfortunately, the registers are shared between several files. Move them into a dedicated regs-ac97.h first. Signed-off-by: Eric Miao <eric.miao@marvell.com>
385 lines
8.3 KiB
C
385 lines
8.3 KiB
C
/*
|
|
* Based on sound/arm/pxa2xx-ac97.c and sound/soc/pxa/pxa2xx-ac97.c
|
|
* which contain:
|
|
*
|
|
* Author: Nicolas Pitre
|
|
* Created: Dec 02, 2004
|
|
* Copyright: MontaVista Software Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <sound/ac97_codec.h>
|
|
#include <sound/pxa2xx-lib.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/regs-ac97.h>
|
|
#include <mach/pxa2xx-gpio.h>
|
|
#include <mach/audio.h>
|
|
|
|
static DEFINE_MUTEX(car_mutex);
|
|
static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
|
|
static volatile long gsr_bits;
|
|
static struct clk *ac97_clk;
|
|
static struct clk *ac97conf_clk;
|
|
|
|
/*
|
|
* Beware PXA27x bugs:
|
|
*
|
|
* o Slot 12 read from modem space will hang controller.
|
|
* o CDONE, SDONE interrupt fails after any slot 12 IO.
|
|
*
|
|
* We therefore have an hybrid approach for waiting on SDONE (interrupt or
|
|
* 1 jiffy timeout if interrupt never comes).
|
|
*/
|
|
|
|
unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
|
|
{
|
|
unsigned short val = -1;
|
|
volatile u32 *reg_addr;
|
|
|
|
mutex_lock(&car_mutex);
|
|
|
|
/* set up primary or secondary codec space */
|
|
if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
|
|
reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
|
|
else
|
|
reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
|
|
reg_addr += (reg >> 1);
|
|
|
|
/* start read access across the ac97 link */
|
|
GSR = GSR_CDONE | GSR_SDONE;
|
|
gsr_bits = 0;
|
|
val = *reg_addr;
|
|
if (reg == AC97_GPIO_STATUS)
|
|
goto out;
|
|
if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1) <= 0 &&
|
|
!((GSR | gsr_bits) & GSR_SDONE)) {
|
|
printk(KERN_ERR "%s: read error (ac97_reg=%d GSR=%#lx)\n",
|
|
__func__, reg, GSR | gsr_bits);
|
|
val = -1;
|
|
goto out;
|
|
}
|
|
|
|
/* valid data now */
|
|
GSR = GSR_CDONE | GSR_SDONE;
|
|
gsr_bits = 0;
|
|
val = *reg_addr;
|
|
/* but we've just started another cycle... */
|
|
wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
|
|
|
|
out: mutex_unlock(&car_mutex);
|
|
return val;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pxa2xx_ac97_read);
|
|
|
|
void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
|
|
unsigned short val)
|
|
{
|
|
volatile u32 *reg_addr;
|
|
|
|
mutex_lock(&car_mutex);
|
|
|
|
/* set up primary or secondary codec space */
|
|
if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
|
|
reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
|
|
else
|
|
reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
|
|
reg_addr += (reg >> 1);
|
|
|
|
GSR = GSR_CDONE | GSR_SDONE;
|
|
gsr_bits = 0;
|
|
*reg_addr = val;
|
|
if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1) <= 0 &&
|
|
!((GSR | gsr_bits) & GSR_CDONE))
|
|
printk(KERN_ERR "%s: write error (ac97_reg=%d GSR=%#lx)\n",
|
|
__func__, reg, GSR | gsr_bits);
|
|
|
|
mutex_unlock(&car_mutex);
|
|
}
|
|
EXPORT_SYMBOL_GPL(pxa2xx_ac97_write);
|
|
|
|
#ifdef CONFIG_PXA25x
|
|
static inline void pxa_ac97_warm_pxa25x(void)
|
|
{
|
|
gsr_bits = 0;
|
|
|
|
GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN;
|
|
wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
|
|
}
|
|
|
|
static inline void pxa_ac97_cold_pxa25x(void)
|
|
{
|
|
GCR &= GCR_COLD_RST; /* clear everything but nCRST */
|
|
GCR &= ~GCR_COLD_RST; /* then assert nCRST */
|
|
|
|
gsr_bits = 0;
|
|
|
|
GCR = GCR_COLD_RST;
|
|
GCR |= GCR_CDONE_IE|GCR_SDONE_IE;
|
|
wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PXA27x
|
|
static inline void pxa_ac97_warm_pxa27x(void)
|
|
{
|
|
gsr_bits = 0;
|
|
|
|
/* warm reset broken on Bulverde,
|
|
so manually keep AC97 reset high */
|
|
pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH);
|
|
udelay(10);
|
|
GCR |= GCR_WARM_RST;
|
|
pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
|
|
udelay(500);
|
|
}
|
|
|
|
static inline void pxa_ac97_cold_pxa27x(void)
|
|
{
|
|
GCR &= GCR_COLD_RST; /* clear everything but nCRST */
|
|
GCR &= ~GCR_COLD_RST; /* then assert nCRST */
|
|
|
|
gsr_bits = 0;
|
|
|
|
/* PXA27x Developers Manual section 13.5.2.2.1 */
|
|
clk_enable(ac97conf_clk);
|
|
udelay(5);
|
|
clk_disable(ac97conf_clk);
|
|
GCR = GCR_COLD_RST;
|
|
udelay(50);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PXA3xx
|
|
static inline void pxa_ac97_warm_pxa3xx(void)
|
|
{
|
|
int timeout = 100;
|
|
|
|
gsr_bits = 0;
|
|
|
|
/* Can't use interrupts */
|
|
GCR |= GCR_WARM_RST;
|
|
while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
|
|
mdelay(1);
|
|
}
|
|
|
|
static inline void pxa_ac97_cold_pxa3xx(void)
|
|
{
|
|
int timeout = 1000;
|
|
|
|
/* Hold CLKBPB for 100us */
|
|
GCR = 0;
|
|
GCR = GCR_CLKBPB;
|
|
udelay(100);
|
|
GCR = 0;
|
|
|
|
GCR &= GCR_COLD_RST; /* clear everything but nCRST */
|
|
GCR &= ~GCR_COLD_RST; /* then assert nCRST */
|
|
|
|
gsr_bits = 0;
|
|
|
|
/* Can't use interrupts on PXA3xx */
|
|
GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
|
|
|
|
GCR = GCR_WARM_RST | GCR_COLD_RST;
|
|
while (!(GSR & (GSR_PCR | GSR_SCR)) && timeout--)
|
|
mdelay(10);
|
|
}
|
|
#endif
|
|
|
|
bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97)
|
|
{
|
|
#ifdef CONFIG_PXA25x
|
|
if (cpu_is_pxa25x())
|
|
pxa_ac97_warm_pxa25x();
|
|
else
|
|
#endif
|
|
#ifdef CONFIG_PXA27x
|
|
if (cpu_is_pxa27x())
|
|
pxa_ac97_warm_pxa27x();
|
|
else
|
|
#endif
|
|
#ifdef CONFIG_PXA3xx
|
|
if (cpu_is_pxa3xx())
|
|
pxa_ac97_warm_pxa3xx();
|
|
else
|
|
#endif
|
|
BUG();
|
|
|
|
if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR))) {
|
|
printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
|
|
__func__, gsr_bits);
|
|
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_warm_reset);
|
|
|
|
bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97)
|
|
{
|
|
#ifdef CONFIG_PXA25x
|
|
if (cpu_is_pxa25x())
|
|
pxa_ac97_cold_pxa25x();
|
|
else
|
|
#endif
|
|
#ifdef CONFIG_PXA27x
|
|
if (cpu_is_pxa27x())
|
|
pxa_ac97_cold_pxa27x();
|
|
else
|
|
#endif
|
|
#ifdef CONFIG_PXA3xx
|
|
if (cpu_is_pxa3xx())
|
|
pxa_ac97_cold_pxa3xx();
|
|
else
|
|
#endif
|
|
BUG();
|
|
|
|
if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR))) {
|
|
printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",
|
|
__func__, gsr_bits);
|
|
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_cold_reset);
|
|
|
|
|
|
void pxa2xx_ac97_finish_reset(struct snd_ac97 *ac97)
|
|
{
|
|
GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
|
|
GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pxa2xx_ac97_finish_reset);
|
|
|
|
static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id)
|
|
{
|
|
long status;
|
|
|
|
status = GSR;
|
|
if (status) {
|
|
GSR = status;
|
|
gsr_bits |= status;
|
|
wake_up(&gsr_wq);
|
|
|
|
/* Although we don't use those we still need to clear them
|
|
since they tend to spuriously trigger when MMC is used
|
|
(hardware bug? go figure)... */
|
|
if (cpu_is_pxa27x()) {
|
|
MISR = MISR_EOC;
|
|
PISR = PISR_EOC;
|
|
MCSR = MCSR_EOC;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
int pxa2xx_ac97_hw_suspend(void)
|
|
{
|
|
GCR |= GCR_ACLINK_OFF;
|
|
clk_disable(ac97_clk);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_suspend);
|
|
|
|
int pxa2xx_ac97_hw_resume(void)
|
|
{
|
|
if (cpu_is_pxa25x() || cpu_is_pxa27x()) {
|
|
pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
|
|
pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
|
|
pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
|
|
pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
|
|
}
|
|
if (cpu_is_pxa27x()) {
|
|
/* Use GPIO 113 as AC97 Reset on Bulverde */
|
|
pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
|
|
}
|
|
clk_enable(ac97_clk);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_resume);
|
|
#endif
|
|
|
|
int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)
|
|
{
|
|
int ret;
|
|
|
|
ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, 0, "AC97", NULL);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
if (cpu_is_pxa25x() || cpu_is_pxa27x()) {
|
|
pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
|
|
pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
|
|
pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
|
|
pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
|
|
}
|
|
|
|
if (cpu_is_pxa27x()) {
|
|
/* Use GPIO 113 as AC97 Reset on Bulverde */
|
|
pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
|
|
ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
|
|
if (IS_ERR(ac97conf_clk)) {
|
|
ret = PTR_ERR(ac97conf_clk);
|
|
ac97conf_clk = NULL;
|
|
goto err_irq;
|
|
}
|
|
}
|
|
|
|
ac97_clk = clk_get(&dev->dev, "AC97CLK");
|
|
if (IS_ERR(ac97_clk)) {
|
|
ret = PTR_ERR(ac97_clk);
|
|
ac97_clk = NULL;
|
|
goto err_irq;
|
|
}
|
|
|
|
return clk_enable(ac97_clk);
|
|
|
|
err_irq:
|
|
GCR |= GCR_ACLINK_OFF;
|
|
if (ac97conf_clk) {
|
|
clk_put(ac97conf_clk);
|
|
ac97conf_clk = NULL;
|
|
}
|
|
free_irq(IRQ_AC97, NULL);
|
|
err:
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_probe);
|
|
|
|
void pxa2xx_ac97_hw_remove(struct platform_device *dev)
|
|
{
|
|
GCR |= GCR_ACLINK_OFF;
|
|
free_irq(IRQ_AC97, NULL);
|
|
if (ac97conf_clk) {
|
|
clk_put(ac97conf_clk);
|
|
ac97conf_clk = NULL;
|
|
}
|
|
clk_disable(ac97_clk);
|
|
clk_put(ac97_clk);
|
|
ac97_clk = NULL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_remove);
|
|
|
|
MODULE_AUTHOR("Nicolas Pitre");
|
|
MODULE_DESCRIPTION("Intel/Marvell PXA sound library");
|
|
MODULE_LICENSE("GPL");
|
|
|