mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 12:49:08 +07:00
3c9740a117
Individual controller driver has different requirement for wakeup setting, so move it from core to itself. In order to align with current etting the default wakeup setting is enabled (except for chipidea host). Pass compile test with below commands: make O=outout/all allmodconfig make -j$CPU_NUM O=outout/all drivers/usb Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1948 lines
48 KiB
C
1948 lines
48 KiB
C
/*
|
|
* USB Host Controller Driver for IMX21
|
|
*
|
|
* Copyright (C) 2006 Loping Dog Embedded Systems
|
|
* Copyright (C) 2009 Martin Fuzzey
|
|
* Originally written by Jay Monkman <jtm@lopingdog.com>
|
|
* Ported to 2.6.30, debugged and enhanced by Martin Fuzzey
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
|
|
/*
|
|
* The i.MX21 USB hardware contains
|
|
* * 32 transfer descriptors (called ETDs)
|
|
* * 4Kb of Data memory
|
|
*
|
|
* The data memory is shared between the host and function controllers
|
|
* (but this driver only supports the host controller)
|
|
*
|
|
* So setting up a transfer involves:
|
|
* * Allocating a ETD
|
|
* * Fill in ETD with appropriate information
|
|
* * Allocating data memory (and putting the offset in the ETD)
|
|
* * Activate the ETD
|
|
* * Get interrupt when done.
|
|
*
|
|
* An ETD is assigned to each active endpoint.
|
|
*
|
|
* Low resource (ETD and Data memory) situations are handled differently for
|
|
* isochronous and non insosynchronous transactions :
|
|
*
|
|
* Non ISOC transfers are queued if either ETDs or Data memory are unavailable
|
|
*
|
|
* ISOC transfers use 2 ETDs per endpoint to achieve double buffering.
|
|
* They allocate both ETDs and Data memory during URB submission
|
|
* (and fail if unavailable).
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/hcd.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/module.h>
|
|
|
|
#include "imx21-hcd.h"
|
|
|
|
#ifdef CONFIG_DYNAMIC_DEBUG
|
|
#define DEBUG
|
|
#endif
|
|
|
|
#ifdef DEBUG
|
|
#define DEBUG_LOG_FRAME(imx21, etd, event) \
|
|
(etd)->event##_frame = readl((imx21)->regs + USBH_FRMNUB)
|
|
#else
|
|
#define DEBUG_LOG_FRAME(imx21, etd, event) do { } while (0)
|
|
#endif
|
|
|
|
static const char hcd_name[] = "imx21-hcd";
|
|
|
|
static inline struct imx21 *hcd_to_imx21(struct usb_hcd *hcd)
|
|
{
|
|
return (struct imx21 *)hcd->hcd_priv;
|
|
}
|
|
|
|
|
|
/* =========================================== */
|
|
/* Hardware access helpers */
|
|
/* =========================================== */
|
|
|
|
static inline void set_register_bits(struct imx21 *imx21, u32 offset, u32 mask)
|
|
{
|
|
void __iomem *reg = imx21->regs + offset;
|
|
writel(readl(reg) | mask, reg);
|
|
}
|
|
|
|
static inline void clear_register_bits(struct imx21 *imx21,
|
|
u32 offset, u32 mask)
|
|
{
|
|
void __iomem *reg = imx21->regs + offset;
|
|
writel(readl(reg) & ~mask, reg);
|
|
}
|
|
|
|
static inline void clear_toggle_bit(struct imx21 *imx21, u32 offset, u32 mask)
|
|
{
|
|
void __iomem *reg = imx21->regs + offset;
|
|
|
|
if (readl(reg) & mask)
|
|
writel(mask, reg);
|
|
}
|
|
|
|
static inline void set_toggle_bit(struct imx21 *imx21, u32 offset, u32 mask)
|
|
{
|
|
void __iomem *reg = imx21->regs + offset;
|
|
|
|
if (!(readl(reg) & mask))
|
|
writel(mask, reg);
|
|
}
|
|
|
|
static void etd_writel(struct imx21 *imx21, int etd_num, int dword, u32 value)
|
|
{
|
|
writel(value, imx21->regs + USB_ETD_DWORD(etd_num, dword));
|
|
}
|
|
|
|
static u32 etd_readl(struct imx21 *imx21, int etd_num, int dword)
|
|
{
|
|
return readl(imx21->regs + USB_ETD_DWORD(etd_num, dword));
|
|
}
|
|
|
|
static inline int wrap_frame(int counter)
|
|
{
|
|
return counter & 0xFFFF;
|
|
}
|
|
|
|
static inline int frame_after(int frame, int after)
|
|
{
|
|
/* handle wrapping like jiffies time_afer */
|
|
return (s16)((s16)after - (s16)frame) < 0;
|
|
}
|
|
|
|
static int imx21_hc_get_frame(struct usb_hcd *hcd)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
|
|
return wrap_frame(readl(imx21->regs + USBH_FRMNUB));
|
|
}
|
|
|
|
static inline bool unsuitable_for_dma(dma_addr_t addr)
|
|
{
|
|
return (addr & 3) != 0;
|
|
}
|
|
|
|
#include "imx21-dbg.c"
|
|
|
|
static void nonisoc_urb_completed_for_etd(
|
|
struct imx21 *imx21, struct etd_priv *etd, int status);
|
|
static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb);
|
|
static void free_dmem(struct imx21 *imx21, struct etd_priv *etd);
|
|
|
|
/* =========================================== */
|
|
/* ETD management */
|
|
/* =========================================== */
|
|
|
|
static int alloc_etd(struct imx21 *imx21)
|
|
{
|
|
int i;
|
|
struct etd_priv *etd = imx21->etd;
|
|
|
|
for (i = 0; i < USB_NUM_ETD; i++, etd++) {
|
|
if (etd->alloc == 0) {
|
|
memset(etd, 0, sizeof(imx21->etd[0]));
|
|
etd->alloc = 1;
|
|
debug_etd_allocated(imx21);
|
|
return i;
|
|
}
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static void disactivate_etd(struct imx21 *imx21, int num)
|
|
{
|
|
int etd_mask = (1 << num);
|
|
struct etd_priv *etd = &imx21->etd[num];
|
|
|
|
writel(etd_mask, imx21->regs + USBH_ETDENCLR);
|
|
clear_register_bits(imx21, USBH_ETDDONEEN, etd_mask);
|
|
writel(etd_mask, imx21->regs + USB_ETDDMACHANLCLR);
|
|
clear_toggle_bit(imx21, USBH_ETDDONESTAT, etd_mask);
|
|
|
|
etd->active_count = 0;
|
|
|
|
DEBUG_LOG_FRAME(imx21, etd, disactivated);
|
|
}
|
|
|
|
static void reset_etd(struct imx21 *imx21, int num)
|
|
{
|
|
struct etd_priv *etd = imx21->etd + num;
|
|
int i;
|
|
|
|
disactivate_etd(imx21, num);
|
|
|
|
for (i = 0; i < 4; i++)
|
|
etd_writel(imx21, num, i, 0);
|
|
etd->urb = NULL;
|
|
etd->ep = NULL;
|
|
etd->td = NULL;
|
|
etd->bounce_buffer = NULL;
|
|
}
|
|
|
|
static void free_etd(struct imx21 *imx21, int num)
|
|
{
|
|
if (num < 0)
|
|
return;
|
|
|
|
if (num >= USB_NUM_ETD) {
|
|
dev_err(imx21->dev, "BAD etd=%d!\n", num);
|
|
return;
|
|
}
|
|
if (imx21->etd[num].alloc == 0) {
|
|
dev_err(imx21->dev, "ETD %d already free!\n", num);
|
|
return;
|
|
}
|
|
|
|
debug_etd_freed(imx21);
|
|
reset_etd(imx21, num);
|
|
memset(&imx21->etd[num], 0, sizeof(imx21->etd[0]));
|
|
}
|
|
|
|
|
|
static void setup_etd_dword0(struct imx21 *imx21,
|
|
int etd_num, struct urb *urb, u8 dir, u16 maxpacket)
|
|
{
|
|
etd_writel(imx21, etd_num, 0,
|
|
((u32) usb_pipedevice(urb->pipe)) << DW0_ADDRESS |
|
|
((u32) usb_pipeendpoint(urb->pipe) << DW0_ENDPNT) |
|
|
((u32) dir << DW0_DIRECT) |
|
|
((u32) ((urb->dev->speed == USB_SPEED_LOW) ?
|
|
1 : 0) << DW0_SPEED) |
|
|
((u32) fmt_urb_to_etd[usb_pipetype(urb->pipe)] << DW0_FORMAT) |
|
|
((u32) maxpacket << DW0_MAXPKTSIZ));
|
|
}
|
|
|
|
/**
|
|
* Copy buffer to data controller data memory.
|
|
* We cannot use memcpy_toio() because the hardware requires 32bit writes
|
|
*/
|
|
static void copy_to_dmem(
|
|
struct imx21 *imx21, int dmem_offset, void *src, int count)
|
|
{
|
|
void __iomem *dmem = imx21->regs + USBOTG_DMEM + dmem_offset;
|
|
u32 word = 0;
|
|
u8 *p = src;
|
|
int byte = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
byte = i % 4;
|
|
word += (*p++ << (byte * 8));
|
|
if (byte == 3) {
|
|
writel(word, dmem);
|
|
dmem += 4;
|
|
word = 0;
|
|
}
|
|
}
|
|
|
|
if (count && byte != 3)
|
|
writel(word, dmem);
|
|
}
|
|
|
|
static void activate_etd(struct imx21 *imx21, int etd_num, u8 dir)
|
|
{
|
|
u32 etd_mask = 1 << etd_num;
|
|
struct etd_priv *etd = &imx21->etd[etd_num];
|
|
|
|
if (etd->dma_handle && unsuitable_for_dma(etd->dma_handle)) {
|
|
/* For non aligned isoc the condition below is always true */
|
|
if (etd->len <= etd->dmem_size) {
|
|
/* Fits into data memory, use PIO */
|
|
if (dir != TD_DIR_IN) {
|
|
copy_to_dmem(imx21,
|
|
etd->dmem_offset,
|
|
etd->cpu_buffer, etd->len);
|
|
}
|
|
etd->dma_handle = 0;
|
|
|
|
} else {
|
|
/* Too big for data memory, use bounce buffer */
|
|
enum dma_data_direction dmadir;
|
|
|
|
if (dir == TD_DIR_IN) {
|
|
dmadir = DMA_FROM_DEVICE;
|
|
etd->bounce_buffer = kmalloc(etd->len,
|
|
GFP_ATOMIC);
|
|
} else {
|
|
dmadir = DMA_TO_DEVICE;
|
|
etd->bounce_buffer = kmemdup(etd->cpu_buffer,
|
|
etd->len,
|
|
GFP_ATOMIC);
|
|
}
|
|
if (!etd->bounce_buffer) {
|
|
dev_err(imx21->dev, "failed bounce alloc\n");
|
|
goto err_bounce_alloc;
|
|
}
|
|
|
|
etd->dma_handle =
|
|
dma_map_single(imx21->dev,
|
|
etd->bounce_buffer,
|
|
etd->len,
|
|
dmadir);
|
|
if (dma_mapping_error(imx21->dev, etd->dma_handle)) {
|
|
dev_err(imx21->dev, "failed bounce map\n");
|
|
goto err_bounce_map;
|
|
}
|
|
}
|
|
}
|
|
|
|
clear_toggle_bit(imx21, USBH_ETDDONESTAT, etd_mask);
|
|
set_register_bits(imx21, USBH_ETDDONEEN, etd_mask);
|
|
clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask);
|
|
clear_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask);
|
|
|
|
if (etd->dma_handle) {
|
|
set_register_bits(imx21, USB_ETDDMACHANLCLR, etd_mask);
|
|
clear_toggle_bit(imx21, USBH_XBUFSTAT, etd_mask);
|
|
clear_toggle_bit(imx21, USBH_YBUFSTAT, etd_mask);
|
|
writel(etd->dma_handle, imx21->regs + USB_ETDSMSA(etd_num));
|
|
set_register_bits(imx21, USB_ETDDMAEN, etd_mask);
|
|
} else {
|
|
if (dir != TD_DIR_IN) {
|
|
/* need to set for ZLP and PIO */
|
|
set_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask);
|
|
set_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask);
|
|
}
|
|
}
|
|
|
|
DEBUG_LOG_FRAME(imx21, etd, activated);
|
|
|
|
#ifdef DEBUG
|
|
if (!etd->active_count) {
|
|
int i;
|
|
etd->activated_frame = readl(imx21->regs + USBH_FRMNUB);
|
|
etd->disactivated_frame = -1;
|
|
etd->last_int_frame = -1;
|
|
etd->last_req_frame = -1;
|
|
|
|
for (i = 0; i < 4; i++)
|
|
etd->submitted_dwords[i] = etd_readl(imx21, etd_num, i);
|
|
}
|
|
#endif
|
|
|
|
etd->active_count = 1;
|
|
writel(etd_mask, imx21->regs + USBH_ETDENSET);
|
|
return;
|
|
|
|
err_bounce_map:
|
|
kfree(etd->bounce_buffer);
|
|
|
|
err_bounce_alloc:
|
|
free_dmem(imx21, etd);
|
|
nonisoc_urb_completed_for_etd(imx21, etd, -ENOMEM);
|
|
}
|
|
|
|
/* =========================================== */
|
|
/* Data memory management */
|
|
/* =========================================== */
|
|
|
|
static int alloc_dmem(struct imx21 *imx21, unsigned int size,
|
|
struct usb_host_endpoint *ep)
|
|
{
|
|
unsigned int offset = 0;
|
|
struct imx21_dmem_area *area;
|
|
struct imx21_dmem_area *tmp;
|
|
|
|
size += (~size + 1) & 0x3; /* Round to 4 byte multiple */
|
|
|
|
if (size > DMEM_SIZE) {
|
|
dev_err(imx21->dev, "size=%d > DMEM_SIZE(%d)\n",
|
|
size, DMEM_SIZE);
|
|
return -EINVAL;
|
|
}
|
|
|
|
list_for_each_entry(tmp, &imx21->dmem_list, list) {
|
|
if ((size + offset) < offset)
|
|
goto fail;
|
|
if ((size + offset) <= tmp->offset)
|
|
break;
|
|
offset = tmp->size + tmp->offset;
|
|
if ((offset + size) > DMEM_SIZE)
|
|
goto fail;
|
|
}
|
|
|
|
area = kmalloc(sizeof(struct imx21_dmem_area), GFP_ATOMIC);
|
|
if (area == NULL)
|
|
return -ENOMEM;
|
|
|
|
area->ep = ep;
|
|
area->offset = offset;
|
|
area->size = size;
|
|
list_add_tail(&area->list, &tmp->list);
|
|
debug_dmem_allocated(imx21, size);
|
|
return offset;
|
|
|
|
fail:
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Memory now available for a queued ETD - activate it */
|
|
static void activate_queued_etd(struct imx21 *imx21,
|
|
struct etd_priv *etd, u32 dmem_offset)
|
|
{
|
|
struct urb_priv *urb_priv = etd->urb->hcpriv;
|
|
int etd_num = etd - &imx21->etd[0];
|
|
u32 maxpacket = etd_readl(imx21, etd_num, 1) >> DW1_YBUFSRTAD;
|
|
u8 dir = (etd_readl(imx21, etd_num, 2) >> DW2_DIRPID) & 0x03;
|
|
|
|
dev_dbg(imx21->dev, "activating queued ETD %d now DMEM available\n",
|
|
etd_num);
|
|
etd_writel(imx21, etd_num, 1,
|
|
((dmem_offset + maxpacket) << DW1_YBUFSRTAD) | dmem_offset);
|
|
|
|
etd->dmem_offset = dmem_offset;
|
|
urb_priv->active = 1;
|
|
activate_etd(imx21, etd_num, dir);
|
|
}
|
|
|
|
static void free_dmem(struct imx21 *imx21, struct etd_priv *etd)
|
|
{
|
|
struct imx21_dmem_area *area;
|
|
struct etd_priv *tmp;
|
|
int found = 0;
|
|
int offset;
|
|
|
|
if (!etd->dmem_size)
|
|
return;
|
|
etd->dmem_size = 0;
|
|
|
|
offset = etd->dmem_offset;
|
|
list_for_each_entry(area, &imx21->dmem_list, list) {
|
|
if (area->offset == offset) {
|
|
debug_dmem_freed(imx21, area->size);
|
|
list_del(&area->list);
|
|
kfree(area);
|
|
found = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!found) {
|
|
dev_err(imx21->dev,
|
|
"Trying to free unallocated DMEM %d\n", offset);
|
|
return;
|
|
}
|
|
|
|
/* Try again to allocate memory for anything we've queued */
|
|
list_for_each_entry_safe(etd, tmp, &imx21->queue_for_dmem, queue) {
|
|
offset = alloc_dmem(imx21, etd->dmem_size, etd->ep);
|
|
if (offset >= 0) {
|
|
list_del(&etd->queue);
|
|
activate_queued_etd(imx21, etd, (u32)offset);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void free_epdmem(struct imx21 *imx21, struct usb_host_endpoint *ep)
|
|
{
|
|
struct imx21_dmem_area *area, *tmp;
|
|
|
|
list_for_each_entry_safe(area, tmp, &imx21->dmem_list, list) {
|
|
if (area->ep == ep) {
|
|
dev_err(imx21->dev,
|
|
"Active DMEM %d for disabled ep=%p\n",
|
|
area->offset, ep);
|
|
list_del(&area->list);
|
|
kfree(area);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* =========================================== */
|
|
/* End handling */
|
|
/* =========================================== */
|
|
|
|
/* Endpoint now idle - release its ETD(s) or assign to queued request */
|
|
static void ep_idle(struct imx21 *imx21, struct ep_priv *ep_priv)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_ISO_ETDS; i++) {
|
|
int etd_num = ep_priv->etd[i];
|
|
struct etd_priv *etd;
|
|
if (etd_num < 0)
|
|
continue;
|
|
|
|
etd = &imx21->etd[etd_num];
|
|
ep_priv->etd[i] = -1;
|
|
|
|
free_dmem(imx21, etd); /* for isoc */
|
|
|
|
if (list_empty(&imx21->queue_for_etd)) {
|
|
free_etd(imx21, etd_num);
|
|
continue;
|
|
}
|
|
|
|
dev_dbg(imx21->dev,
|
|
"assigning idle etd %d for queued request\n", etd_num);
|
|
ep_priv = list_first_entry(&imx21->queue_for_etd,
|
|
struct ep_priv, queue);
|
|
list_del(&ep_priv->queue);
|
|
reset_etd(imx21, etd_num);
|
|
ep_priv->waiting_etd = 0;
|
|
ep_priv->etd[i] = etd_num;
|
|
|
|
if (list_empty(&ep_priv->ep->urb_list)) {
|
|
dev_err(imx21->dev, "No urb for queued ep!\n");
|
|
continue;
|
|
}
|
|
schedule_nonisoc_etd(imx21, list_first_entry(
|
|
&ep_priv->ep->urb_list, struct urb, urb_list));
|
|
}
|
|
}
|
|
|
|
static void urb_done(struct usb_hcd *hcd, struct urb *urb, int status)
|
|
__releases(imx21->lock)
|
|
__acquires(imx21->lock)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
struct ep_priv *ep_priv = urb->ep->hcpriv;
|
|
struct urb_priv *urb_priv = urb->hcpriv;
|
|
|
|
debug_urb_completed(imx21, urb, status);
|
|
dev_vdbg(imx21->dev, "urb %p done %d\n", urb, status);
|
|
|
|
kfree(urb_priv->isoc_td);
|
|
kfree(urb->hcpriv);
|
|
urb->hcpriv = NULL;
|
|
usb_hcd_unlink_urb_from_ep(hcd, urb);
|
|
spin_unlock(&imx21->lock);
|
|
usb_hcd_giveback_urb(hcd, urb, status);
|
|
spin_lock(&imx21->lock);
|
|
if (list_empty(&ep_priv->ep->urb_list))
|
|
ep_idle(imx21, ep_priv);
|
|
}
|
|
|
|
static void nonisoc_urb_completed_for_etd(
|
|
struct imx21 *imx21, struct etd_priv *etd, int status)
|
|
{
|
|
struct usb_host_endpoint *ep = etd->ep;
|
|
|
|
urb_done(imx21->hcd, etd->urb, status);
|
|
etd->urb = NULL;
|
|
|
|
if (!list_empty(&ep->urb_list)) {
|
|
struct urb *urb = list_first_entry(
|
|
&ep->urb_list, struct urb, urb_list);
|
|
|
|
dev_vdbg(imx21->dev, "next URB %p\n", urb);
|
|
schedule_nonisoc_etd(imx21, urb);
|
|
}
|
|
}
|
|
|
|
|
|
/* =========================================== */
|
|
/* ISOC Handling ... */
|
|
/* =========================================== */
|
|
|
|
static void schedule_isoc_etds(struct usb_hcd *hcd,
|
|
struct usb_host_endpoint *ep)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
struct ep_priv *ep_priv = ep->hcpriv;
|
|
struct etd_priv *etd;
|
|
struct urb_priv *urb_priv;
|
|
struct td *td;
|
|
int etd_num;
|
|
int i;
|
|
int cur_frame;
|
|
u8 dir;
|
|
|
|
for (i = 0; i < NUM_ISO_ETDS; i++) {
|
|
too_late:
|
|
if (list_empty(&ep_priv->td_list))
|
|
break;
|
|
|
|
etd_num = ep_priv->etd[i];
|
|
if (etd_num < 0)
|
|
break;
|
|
|
|
etd = &imx21->etd[etd_num];
|
|
if (etd->urb)
|
|
continue;
|
|
|
|
td = list_entry(ep_priv->td_list.next, struct td, list);
|
|
list_del(&td->list);
|
|
urb_priv = td->urb->hcpriv;
|
|
|
|
cur_frame = imx21_hc_get_frame(hcd);
|
|
if (frame_after(cur_frame, td->frame)) {
|
|
dev_dbg(imx21->dev, "isoc too late frame %d > %d\n",
|
|
cur_frame, td->frame);
|
|
urb_priv->isoc_status = -EXDEV;
|
|
td->urb->iso_frame_desc[
|
|
td->isoc_index].actual_length = 0;
|
|
td->urb->iso_frame_desc[td->isoc_index].status = -EXDEV;
|
|
if (--urb_priv->isoc_remaining == 0)
|
|
urb_done(hcd, td->urb, urb_priv->isoc_status);
|
|
goto too_late;
|
|
}
|
|
|
|
urb_priv->active = 1;
|
|
etd->td = td;
|
|
etd->ep = td->ep;
|
|
etd->urb = td->urb;
|
|
etd->len = td->len;
|
|
etd->dma_handle = td->dma_handle;
|
|
etd->cpu_buffer = td->cpu_buffer;
|
|
|
|
debug_isoc_submitted(imx21, cur_frame, td);
|
|
|
|
dir = usb_pipeout(td->urb->pipe) ? TD_DIR_OUT : TD_DIR_IN;
|
|
setup_etd_dword0(imx21, etd_num, td->urb, dir, etd->dmem_size);
|
|
etd_writel(imx21, etd_num, 1, etd->dmem_offset);
|
|
etd_writel(imx21, etd_num, 2,
|
|
(TD_NOTACCESSED << DW2_COMPCODE) |
|
|
((td->frame & 0xFFFF) << DW2_STARTFRM));
|
|
etd_writel(imx21, etd_num, 3,
|
|
(TD_NOTACCESSED << DW3_COMPCODE0) |
|
|
(td->len << DW3_PKTLEN0));
|
|
|
|
activate_etd(imx21, etd_num, dir);
|
|
}
|
|
}
|
|
|
|
static void isoc_etd_done(struct usb_hcd *hcd, int etd_num)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
int etd_mask = 1 << etd_num;
|
|
struct etd_priv *etd = imx21->etd + etd_num;
|
|
struct urb *urb = etd->urb;
|
|
struct urb_priv *urb_priv = urb->hcpriv;
|
|
struct td *td = etd->td;
|
|
struct usb_host_endpoint *ep = etd->ep;
|
|
int isoc_index = td->isoc_index;
|
|
unsigned int pipe = urb->pipe;
|
|
int dir_in = usb_pipein(pipe);
|
|
int cc;
|
|
int bytes_xfrd;
|
|
|
|
disactivate_etd(imx21, etd_num);
|
|
|
|
cc = (etd_readl(imx21, etd_num, 3) >> DW3_COMPCODE0) & 0xf;
|
|
bytes_xfrd = etd_readl(imx21, etd_num, 3) & 0x3ff;
|
|
|
|
/* Input doesn't always fill the buffer, don't generate an error
|
|
* when this happens.
|
|
*/
|
|
if (dir_in && (cc == TD_DATAUNDERRUN))
|
|
cc = TD_CC_NOERROR;
|
|
|
|
if (cc == TD_NOTACCESSED)
|
|
bytes_xfrd = 0;
|
|
|
|
debug_isoc_completed(imx21,
|
|
imx21_hc_get_frame(hcd), td, cc, bytes_xfrd);
|
|
if (cc) {
|
|
urb_priv->isoc_status = -EXDEV;
|
|
dev_dbg(imx21->dev,
|
|
"bad iso cc=0x%X frame=%d sched frame=%d "
|
|
"cnt=%d len=%d urb=%p etd=%d index=%d\n",
|
|
cc, imx21_hc_get_frame(hcd), td->frame,
|
|
bytes_xfrd, td->len, urb, etd_num, isoc_index);
|
|
}
|
|
|
|
if (dir_in) {
|
|
clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask);
|
|
if (!etd->dma_handle)
|
|
memcpy_fromio(etd->cpu_buffer,
|
|
imx21->regs + USBOTG_DMEM + etd->dmem_offset,
|
|
bytes_xfrd);
|
|
}
|
|
|
|
urb->actual_length += bytes_xfrd;
|
|
urb->iso_frame_desc[isoc_index].actual_length = bytes_xfrd;
|
|
urb->iso_frame_desc[isoc_index].status = cc_to_error[cc];
|
|
|
|
etd->td = NULL;
|
|
etd->urb = NULL;
|
|
etd->ep = NULL;
|
|
|
|
if (--urb_priv->isoc_remaining == 0)
|
|
urb_done(hcd, urb, urb_priv->isoc_status);
|
|
|
|
schedule_isoc_etds(hcd, ep);
|
|
}
|
|
|
|
static struct ep_priv *alloc_isoc_ep(
|
|
struct imx21 *imx21, struct usb_host_endpoint *ep)
|
|
{
|
|
struct ep_priv *ep_priv;
|
|
int i;
|
|
|
|
ep_priv = kzalloc(sizeof(struct ep_priv), GFP_ATOMIC);
|
|
if (!ep_priv)
|
|
return NULL;
|
|
|
|
for (i = 0; i < NUM_ISO_ETDS; i++)
|
|
ep_priv->etd[i] = -1;
|
|
|
|
INIT_LIST_HEAD(&ep_priv->td_list);
|
|
ep_priv->ep = ep;
|
|
ep->hcpriv = ep_priv;
|
|
return ep_priv;
|
|
}
|
|
|
|
static int alloc_isoc_etds(struct imx21 *imx21, struct ep_priv *ep_priv)
|
|
{
|
|
int i, j;
|
|
int etd_num;
|
|
|
|
/* Allocate the ETDs if required */
|
|
for (i = 0; i < NUM_ISO_ETDS; i++) {
|
|
if (ep_priv->etd[i] < 0) {
|
|
etd_num = alloc_etd(imx21);
|
|
if (etd_num < 0)
|
|
goto alloc_etd_failed;
|
|
|
|
ep_priv->etd[i] = etd_num;
|
|
imx21->etd[etd_num].ep = ep_priv->ep;
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
alloc_etd_failed:
|
|
dev_err(imx21->dev, "isoc: Couldn't allocate etd\n");
|
|
for (j = 0; j < i; j++) {
|
|
free_etd(imx21, ep_priv->etd[j]);
|
|
ep_priv->etd[j] = -1;
|
|
}
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static int imx21_hc_urb_enqueue_isoc(struct usb_hcd *hcd,
|
|
struct usb_host_endpoint *ep,
|
|
struct urb *urb, gfp_t mem_flags)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
struct urb_priv *urb_priv;
|
|
unsigned long flags;
|
|
struct ep_priv *ep_priv;
|
|
struct td *td = NULL;
|
|
int i;
|
|
int ret;
|
|
int cur_frame;
|
|
u16 maxpacket;
|
|
|
|
urb_priv = kzalloc(sizeof(struct urb_priv), mem_flags);
|
|
if (urb_priv == NULL)
|
|
return -ENOMEM;
|
|
|
|
urb_priv->isoc_td = kzalloc(
|
|
sizeof(struct td) * urb->number_of_packets, mem_flags);
|
|
if (urb_priv->isoc_td == NULL) {
|
|
ret = -ENOMEM;
|
|
goto alloc_td_failed;
|
|
}
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags);
|
|
|
|
if (ep->hcpriv == NULL) {
|
|
ep_priv = alloc_isoc_ep(imx21, ep);
|
|
if (ep_priv == NULL) {
|
|
ret = -ENOMEM;
|
|
goto alloc_ep_failed;
|
|
}
|
|
} else {
|
|
ep_priv = ep->hcpriv;
|
|
}
|
|
|
|
ret = alloc_isoc_etds(imx21, ep_priv);
|
|
if (ret)
|
|
goto alloc_etd_failed;
|
|
|
|
ret = usb_hcd_link_urb_to_ep(hcd, urb);
|
|
if (ret)
|
|
goto link_failed;
|
|
|
|
urb->status = -EINPROGRESS;
|
|
urb->actual_length = 0;
|
|
urb->error_count = 0;
|
|
urb->hcpriv = urb_priv;
|
|
urb_priv->ep = ep;
|
|
|
|
/* allocate data memory for largest packets if not already done */
|
|
maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
|
|
for (i = 0; i < NUM_ISO_ETDS; i++) {
|
|
struct etd_priv *etd = &imx21->etd[ep_priv->etd[i]];
|
|
|
|
if (etd->dmem_size > 0 && etd->dmem_size < maxpacket) {
|
|
/* not sure if this can really occur.... */
|
|
dev_err(imx21->dev, "increasing isoc buffer %d->%d\n",
|
|
etd->dmem_size, maxpacket);
|
|
ret = -EMSGSIZE;
|
|
goto alloc_dmem_failed;
|
|
}
|
|
|
|
if (etd->dmem_size == 0) {
|
|
etd->dmem_offset = alloc_dmem(imx21, maxpacket, ep);
|
|
if (etd->dmem_offset < 0) {
|
|
dev_dbg(imx21->dev, "failed alloc isoc dmem\n");
|
|
ret = -EAGAIN;
|
|
goto alloc_dmem_failed;
|
|
}
|
|
etd->dmem_size = maxpacket;
|
|
}
|
|
}
|
|
|
|
/* calculate frame */
|
|
cur_frame = imx21_hc_get_frame(hcd);
|
|
i = 0;
|
|
if (list_empty(&ep_priv->td_list)) {
|
|
urb->start_frame = wrap_frame(cur_frame + 5);
|
|
} else {
|
|
urb->start_frame = wrap_frame(list_entry(ep_priv->td_list.prev,
|
|
struct td, list)->frame + urb->interval);
|
|
|
|
if (frame_after(cur_frame, urb->start_frame)) {
|
|
dev_dbg(imx21->dev,
|
|
"enqueue: adjusting iso start %d (cur=%d) asap=%d\n",
|
|
urb->start_frame, cur_frame,
|
|
(urb->transfer_flags & URB_ISO_ASAP) != 0);
|
|
i = DIV_ROUND_UP(wrap_frame(
|
|
cur_frame - urb->start_frame),
|
|
urb->interval);
|
|
|
|
/* Treat underruns as if URB_ISO_ASAP was set */
|
|
if ((urb->transfer_flags & URB_ISO_ASAP) ||
|
|
i >= urb->number_of_packets) {
|
|
urb->start_frame = wrap_frame(urb->start_frame
|
|
+ i * urb->interval);
|
|
i = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* set up transfers */
|
|
urb_priv->isoc_remaining = urb->number_of_packets - i;
|
|
td = urb_priv->isoc_td;
|
|
for (; i < urb->number_of_packets; i++, td++) {
|
|
unsigned int offset = urb->iso_frame_desc[i].offset;
|
|
td->ep = ep;
|
|
td->urb = urb;
|
|
td->len = urb->iso_frame_desc[i].length;
|
|
td->isoc_index = i;
|
|
td->frame = wrap_frame(urb->start_frame + urb->interval * i);
|
|
td->dma_handle = urb->transfer_dma + offset;
|
|
td->cpu_buffer = urb->transfer_buffer + offset;
|
|
list_add_tail(&td->list, &ep_priv->td_list);
|
|
}
|
|
|
|
dev_vdbg(imx21->dev, "setup %d packets for iso frame %d->%d\n",
|
|
urb->number_of_packets, urb->start_frame, td->frame);
|
|
|
|
debug_urb_submitted(imx21, urb);
|
|
schedule_isoc_etds(hcd, ep);
|
|
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
return 0;
|
|
|
|
alloc_dmem_failed:
|
|
usb_hcd_unlink_urb_from_ep(hcd, urb);
|
|
|
|
link_failed:
|
|
alloc_etd_failed:
|
|
alloc_ep_failed:
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
kfree(urb_priv->isoc_td);
|
|
|
|
alloc_td_failed:
|
|
kfree(urb_priv);
|
|
return ret;
|
|
}
|
|
|
|
static void dequeue_isoc_urb(struct imx21 *imx21,
|
|
struct urb *urb, struct ep_priv *ep_priv)
|
|
{
|
|
struct urb_priv *urb_priv = urb->hcpriv;
|
|
struct td *td, *tmp;
|
|
int i;
|
|
|
|
if (urb_priv->active) {
|
|
for (i = 0; i < NUM_ISO_ETDS; i++) {
|
|
int etd_num = ep_priv->etd[i];
|
|
if (etd_num != -1 && imx21->etd[etd_num].urb == urb) {
|
|
struct etd_priv *etd = imx21->etd + etd_num;
|
|
|
|
reset_etd(imx21, etd_num);
|
|
free_dmem(imx21, etd);
|
|
}
|
|
}
|
|
}
|
|
|
|
list_for_each_entry_safe(td, tmp, &ep_priv->td_list, list) {
|
|
if (td->urb == urb) {
|
|
dev_vdbg(imx21->dev, "removing td %p\n", td);
|
|
list_del(&td->list);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* =========================================== */
|
|
/* NON ISOC Handling ... */
|
|
/* =========================================== */
|
|
|
|
static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb)
|
|
{
|
|
unsigned int pipe = urb->pipe;
|
|
struct urb_priv *urb_priv = urb->hcpriv;
|
|
struct ep_priv *ep_priv = urb_priv->ep->hcpriv;
|
|
int state = urb_priv->state;
|
|
int etd_num = ep_priv->etd[0];
|
|
struct etd_priv *etd;
|
|
u32 count;
|
|
u16 etd_buf_size;
|
|
u16 maxpacket;
|
|
u8 dir;
|
|
u8 bufround;
|
|
u8 datatoggle;
|
|
u8 interval = 0;
|
|
u8 relpolpos = 0;
|
|
|
|
if (etd_num < 0) {
|
|
dev_err(imx21->dev, "No valid ETD\n");
|
|
return;
|
|
}
|
|
if (readl(imx21->regs + USBH_ETDENSET) & (1 << etd_num))
|
|
dev_err(imx21->dev, "submitting to active ETD %d\n", etd_num);
|
|
|
|
etd = &imx21->etd[etd_num];
|
|
maxpacket = usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe));
|
|
if (!maxpacket)
|
|
maxpacket = 8;
|
|
|
|
if (usb_pipecontrol(pipe) && (state != US_CTRL_DATA)) {
|
|
if (state == US_CTRL_SETUP) {
|
|
dir = TD_DIR_SETUP;
|
|
if (unsuitable_for_dma(urb->setup_dma))
|
|
usb_hcd_unmap_urb_setup_for_dma(imx21->hcd,
|
|
urb);
|
|
etd->dma_handle = urb->setup_dma;
|
|
etd->cpu_buffer = urb->setup_packet;
|
|
bufround = 0;
|
|
count = 8;
|
|
datatoggle = TD_TOGGLE_DATA0;
|
|
} else { /* US_CTRL_ACK */
|
|
dir = usb_pipeout(pipe) ? TD_DIR_IN : TD_DIR_OUT;
|
|
bufround = 0;
|
|
count = 0;
|
|
datatoggle = TD_TOGGLE_DATA1;
|
|
}
|
|
} else {
|
|
dir = usb_pipeout(pipe) ? TD_DIR_OUT : TD_DIR_IN;
|
|
bufround = (dir == TD_DIR_IN) ? 1 : 0;
|
|
if (unsuitable_for_dma(urb->transfer_dma))
|
|
usb_hcd_unmap_urb_for_dma(imx21->hcd, urb);
|
|
|
|
etd->dma_handle = urb->transfer_dma;
|
|
etd->cpu_buffer = urb->transfer_buffer;
|
|
if (usb_pipebulk(pipe) && (state == US_BULK0))
|
|
count = 0;
|
|
else
|
|
count = urb->transfer_buffer_length;
|
|
|
|
if (usb_pipecontrol(pipe)) {
|
|
datatoggle = TD_TOGGLE_DATA1;
|
|
} else {
|
|
if (usb_gettoggle(
|
|
urb->dev,
|
|
usb_pipeendpoint(urb->pipe),
|
|
usb_pipeout(urb->pipe)))
|
|
datatoggle = TD_TOGGLE_DATA1;
|
|
else
|
|
datatoggle = TD_TOGGLE_DATA0;
|
|
}
|
|
}
|
|
|
|
etd->urb = urb;
|
|
etd->ep = urb_priv->ep;
|
|
etd->len = count;
|
|
|
|
if (usb_pipeint(pipe)) {
|
|
interval = urb->interval;
|
|
relpolpos = (readl(imx21->regs + USBH_FRMNUB) + 1) & 0xff;
|
|
}
|
|
|
|
/* Write ETD to device memory */
|
|
setup_etd_dword0(imx21, etd_num, urb, dir, maxpacket);
|
|
|
|
etd_writel(imx21, etd_num, 2,
|
|
(u32) interval << DW2_POLINTERV |
|
|
((u32) relpolpos << DW2_RELPOLPOS) |
|
|
((u32) dir << DW2_DIRPID) |
|
|
((u32) bufround << DW2_BUFROUND) |
|
|
((u32) datatoggle << DW2_DATATOG) |
|
|
((u32) TD_NOTACCESSED << DW2_COMPCODE));
|
|
|
|
/* DMA will always transfer buffer size even if TOBYCNT in DWORD3
|
|
is smaller. Make sure we don't overrun the buffer!
|
|
*/
|
|
if (count && count < maxpacket)
|
|
etd_buf_size = count;
|
|
else
|
|
etd_buf_size = maxpacket;
|
|
|
|
etd_writel(imx21, etd_num, 3,
|
|
((u32) (etd_buf_size - 1) << DW3_BUFSIZE) | (u32) count);
|
|
|
|
if (!count)
|
|
etd->dma_handle = 0;
|
|
|
|
/* allocate x and y buffer space at once */
|
|
etd->dmem_size = (count > maxpacket) ? maxpacket * 2 : maxpacket;
|
|
etd->dmem_offset = alloc_dmem(imx21, etd->dmem_size, urb_priv->ep);
|
|
if (etd->dmem_offset < 0) {
|
|
/* Setup everything we can in HW and update when we get DMEM */
|
|
etd_writel(imx21, etd_num, 1, (u32)maxpacket << 16);
|
|
|
|
dev_dbg(imx21->dev, "Queuing etd %d for DMEM\n", etd_num);
|
|
debug_urb_queued_for_dmem(imx21, urb);
|
|
list_add_tail(&etd->queue, &imx21->queue_for_dmem);
|
|
return;
|
|
}
|
|
|
|
etd_writel(imx21, etd_num, 1,
|
|
(((u32) etd->dmem_offset + (u32) maxpacket) << DW1_YBUFSRTAD) |
|
|
(u32) etd->dmem_offset);
|
|
|
|
urb_priv->active = 1;
|
|
|
|
/* enable the ETD to kick off transfer */
|
|
dev_vdbg(imx21->dev, "Activating etd %d for %d bytes %s\n",
|
|
etd_num, count, dir != TD_DIR_IN ? "out" : "in");
|
|
activate_etd(imx21, etd_num, dir);
|
|
|
|
}
|
|
|
|
static void nonisoc_etd_done(struct usb_hcd *hcd, int etd_num)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
struct etd_priv *etd = &imx21->etd[etd_num];
|
|
struct urb *urb = etd->urb;
|
|
u32 etd_mask = 1 << etd_num;
|
|
struct urb_priv *urb_priv = urb->hcpriv;
|
|
int dir;
|
|
int cc;
|
|
u32 bytes_xfrd;
|
|
int etd_done;
|
|
|
|
disactivate_etd(imx21, etd_num);
|
|
|
|
dir = (etd_readl(imx21, etd_num, 0) >> DW0_DIRECT) & 0x3;
|
|
cc = (etd_readl(imx21, etd_num, 2) >> DW2_COMPCODE) & 0xf;
|
|
bytes_xfrd = etd->len - (etd_readl(imx21, etd_num, 3) & 0x1fffff);
|
|
|
|
/* save toggle carry */
|
|
usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
|
|
usb_pipeout(urb->pipe),
|
|
(etd_readl(imx21, etd_num, 0) >> DW0_TOGCRY) & 0x1);
|
|
|
|
if (dir == TD_DIR_IN) {
|
|
clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask);
|
|
clear_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask);
|
|
|
|
if (etd->bounce_buffer) {
|
|
memcpy(etd->cpu_buffer, etd->bounce_buffer, bytes_xfrd);
|
|
dma_unmap_single(imx21->dev,
|
|
etd->dma_handle, etd->len, DMA_FROM_DEVICE);
|
|
} else if (!etd->dma_handle && bytes_xfrd) {/* PIO */
|
|
memcpy_fromio(etd->cpu_buffer,
|
|
imx21->regs + USBOTG_DMEM + etd->dmem_offset,
|
|
bytes_xfrd);
|
|
}
|
|
}
|
|
|
|
kfree(etd->bounce_buffer);
|
|
etd->bounce_buffer = NULL;
|
|
free_dmem(imx21, etd);
|
|
|
|
urb->error_count = 0;
|
|
if (!(urb->transfer_flags & URB_SHORT_NOT_OK)
|
|
&& (cc == TD_DATAUNDERRUN))
|
|
cc = TD_CC_NOERROR;
|
|
|
|
if (cc != 0)
|
|
dev_vdbg(imx21->dev, "cc is 0x%x\n", cc);
|
|
|
|
etd_done = (cc_to_error[cc] != 0); /* stop if error */
|
|
|
|
switch (usb_pipetype(urb->pipe)) {
|
|
case PIPE_CONTROL:
|
|
switch (urb_priv->state) {
|
|
case US_CTRL_SETUP:
|
|
if (urb->transfer_buffer_length > 0)
|
|
urb_priv->state = US_CTRL_DATA;
|
|
else
|
|
urb_priv->state = US_CTRL_ACK;
|
|
break;
|
|
case US_CTRL_DATA:
|
|
urb->actual_length += bytes_xfrd;
|
|
urb_priv->state = US_CTRL_ACK;
|
|
break;
|
|
case US_CTRL_ACK:
|
|
etd_done = 1;
|
|
break;
|
|
default:
|
|
dev_err(imx21->dev,
|
|
"Invalid pipe state %d\n", urb_priv->state);
|
|
etd_done = 1;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case PIPE_BULK:
|
|
urb->actual_length += bytes_xfrd;
|
|
if ((urb_priv->state == US_BULK)
|
|
&& (urb->transfer_flags & URB_ZERO_PACKET)
|
|
&& urb->transfer_buffer_length > 0
|
|
&& ((urb->transfer_buffer_length %
|
|
usb_maxpacket(urb->dev, urb->pipe,
|
|
usb_pipeout(urb->pipe))) == 0)) {
|
|
/* need a 0-packet */
|
|
urb_priv->state = US_BULK0;
|
|
} else {
|
|
etd_done = 1;
|
|
}
|
|
break;
|
|
|
|
case PIPE_INTERRUPT:
|
|
urb->actual_length += bytes_xfrd;
|
|
etd_done = 1;
|
|
break;
|
|
}
|
|
|
|
if (etd_done)
|
|
nonisoc_urb_completed_for_etd(imx21, etd, cc_to_error[cc]);
|
|
else {
|
|
dev_vdbg(imx21->dev, "next state=%d\n", urb_priv->state);
|
|
schedule_nonisoc_etd(imx21, urb);
|
|
}
|
|
}
|
|
|
|
|
|
static struct ep_priv *alloc_ep(void)
|
|
{
|
|
int i;
|
|
struct ep_priv *ep_priv;
|
|
|
|
ep_priv = kzalloc(sizeof(struct ep_priv), GFP_ATOMIC);
|
|
if (!ep_priv)
|
|
return NULL;
|
|
|
|
for (i = 0; i < NUM_ISO_ETDS; ++i)
|
|
ep_priv->etd[i] = -1;
|
|
|
|
return ep_priv;
|
|
}
|
|
|
|
static int imx21_hc_urb_enqueue(struct usb_hcd *hcd,
|
|
struct urb *urb, gfp_t mem_flags)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
struct usb_host_endpoint *ep = urb->ep;
|
|
struct urb_priv *urb_priv;
|
|
struct ep_priv *ep_priv;
|
|
struct etd_priv *etd;
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
dev_vdbg(imx21->dev,
|
|
"enqueue urb=%p ep=%p len=%d "
|
|
"buffer=%p dma=%08X setupBuf=%p setupDma=%08X\n",
|
|
urb, ep,
|
|
urb->transfer_buffer_length,
|
|
urb->transfer_buffer, urb->transfer_dma,
|
|
urb->setup_packet, urb->setup_dma);
|
|
|
|
if (usb_pipeisoc(urb->pipe))
|
|
return imx21_hc_urb_enqueue_isoc(hcd, ep, urb, mem_flags);
|
|
|
|
urb_priv = kzalloc(sizeof(struct urb_priv), mem_flags);
|
|
if (!urb_priv)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags);
|
|
|
|
ep_priv = ep->hcpriv;
|
|
if (ep_priv == NULL) {
|
|
ep_priv = alloc_ep();
|
|
if (!ep_priv) {
|
|
ret = -ENOMEM;
|
|
goto failed_alloc_ep;
|
|
}
|
|
ep->hcpriv = ep_priv;
|
|
ep_priv->ep = ep;
|
|
}
|
|
|
|
ret = usb_hcd_link_urb_to_ep(hcd, urb);
|
|
if (ret)
|
|
goto failed_link;
|
|
|
|
urb->status = -EINPROGRESS;
|
|
urb->actual_length = 0;
|
|
urb->error_count = 0;
|
|
urb->hcpriv = urb_priv;
|
|
urb_priv->ep = ep;
|
|
|
|
switch (usb_pipetype(urb->pipe)) {
|
|
case PIPE_CONTROL:
|
|
urb_priv->state = US_CTRL_SETUP;
|
|
break;
|
|
case PIPE_BULK:
|
|
urb_priv->state = US_BULK;
|
|
break;
|
|
}
|
|
|
|
debug_urb_submitted(imx21, urb);
|
|
if (ep_priv->etd[0] < 0) {
|
|
if (ep_priv->waiting_etd) {
|
|
dev_dbg(imx21->dev,
|
|
"no ETD available already queued %p\n",
|
|
ep_priv);
|
|
debug_urb_queued_for_etd(imx21, urb);
|
|
goto out;
|
|
}
|
|
ep_priv->etd[0] = alloc_etd(imx21);
|
|
if (ep_priv->etd[0] < 0) {
|
|
dev_dbg(imx21->dev,
|
|
"no ETD available queueing %p\n", ep_priv);
|
|
debug_urb_queued_for_etd(imx21, urb);
|
|
list_add_tail(&ep_priv->queue, &imx21->queue_for_etd);
|
|
ep_priv->waiting_etd = 1;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* Schedule if no URB already active for this endpoint */
|
|
etd = &imx21->etd[ep_priv->etd[0]];
|
|
if (etd->urb == NULL) {
|
|
DEBUG_LOG_FRAME(imx21, etd, last_req);
|
|
schedule_nonisoc_etd(imx21, urb);
|
|
}
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
return 0;
|
|
|
|
failed_link:
|
|
failed_alloc_ep:
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
kfree(urb_priv);
|
|
return ret;
|
|
}
|
|
|
|
static int imx21_hc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
|
|
int status)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
unsigned long flags;
|
|
struct usb_host_endpoint *ep;
|
|
struct ep_priv *ep_priv;
|
|
struct urb_priv *urb_priv = urb->hcpriv;
|
|
int ret = -EINVAL;
|
|
|
|
dev_vdbg(imx21->dev, "dequeue urb=%p iso=%d status=%d\n",
|
|
urb, usb_pipeisoc(urb->pipe), status);
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags);
|
|
|
|
ret = usb_hcd_check_unlink_urb(hcd, urb, status);
|
|
if (ret)
|
|
goto fail;
|
|
ep = urb_priv->ep;
|
|
ep_priv = ep->hcpriv;
|
|
|
|
debug_urb_unlinked(imx21, urb);
|
|
|
|
if (usb_pipeisoc(urb->pipe)) {
|
|
dequeue_isoc_urb(imx21, urb, ep_priv);
|
|
schedule_isoc_etds(hcd, ep);
|
|
} else if (urb_priv->active) {
|
|
int etd_num = ep_priv->etd[0];
|
|
if (etd_num != -1) {
|
|
struct etd_priv *etd = &imx21->etd[etd_num];
|
|
|
|
disactivate_etd(imx21, etd_num);
|
|
free_dmem(imx21, etd);
|
|
etd->urb = NULL;
|
|
kfree(etd->bounce_buffer);
|
|
etd->bounce_buffer = NULL;
|
|
}
|
|
}
|
|
|
|
urb_done(hcd, urb, status);
|
|
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
return 0;
|
|
|
|
fail:
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
/* =========================================== */
|
|
/* Interrupt dispatch */
|
|
/* =========================================== */
|
|
|
|
static void process_etds(struct usb_hcd *hcd, struct imx21 *imx21, int sof)
|
|
{
|
|
int etd_num;
|
|
int enable_sof_int = 0;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags);
|
|
|
|
for (etd_num = 0; etd_num < USB_NUM_ETD; etd_num++) {
|
|
u32 etd_mask = 1 << etd_num;
|
|
u32 enabled = readl(imx21->regs + USBH_ETDENSET) & etd_mask;
|
|
u32 done = readl(imx21->regs + USBH_ETDDONESTAT) & etd_mask;
|
|
struct etd_priv *etd = &imx21->etd[etd_num];
|
|
|
|
|
|
if (done) {
|
|
DEBUG_LOG_FRAME(imx21, etd, last_int);
|
|
} else {
|
|
/*
|
|
* Kludge warning!
|
|
*
|
|
* When multiple transfers are using the bus we sometimes get into a state
|
|
* where the transfer has completed (the CC field of the ETD is != 0x0F),
|
|
* the ETD has self disabled but the ETDDONESTAT flag is not set
|
|
* (and hence no interrupt occurs).
|
|
* This causes the transfer in question to hang.
|
|
* The kludge below checks for this condition at each SOF and processes any
|
|
* blocked ETDs (after an arbitrary 10 frame wait)
|
|
*
|
|
* With a single active transfer the usbtest test suite will run for days
|
|
* without the kludge.
|
|
* With other bus activity (eg mass storage) even just test1 will hang without
|
|
* the kludge.
|
|
*/
|
|
u32 dword0;
|
|
int cc;
|
|
|
|
if (etd->active_count && !enabled) /* suspicious... */
|
|
enable_sof_int = 1;
|
|
|
|
if (!sof || enabled || !etd->active_count)
|
|
continue;
|
|
|
|
cc = etd_readl(imx21, etd_num, 2) >> DW2_COMPCODE;
|
|
if (cc == TD_NOTACCESSED)
|
|
continue;
|
|
|
|
if (++etd->active_count < 10)
|
|
continue;
|
|
|
|
dword0 = etd_readl(imx21, etd_num, 0);
|
|
dev_dbg(imx21->dev,
|
|
"unblock ETD %d dev=0x%X ep=0x%X cc=0x%02X!\n",
|
|
etd_num, dword0 & 0x7F,
|
|
(dword0 >> DW0_ENDPNT) & 0x0F,
|
|
cc);
|
|
|
|
#ifdef DEBUG
|
|
dev_dbg(imx21->dev,
|
|
"frame: act=%d disact=%d"
|
|
" int=%d req=%d cur=%d\n",
|
|
etd->activated_frame,
|
|
etd->disactivated_frame,
|
|
etd->last_int_frame,
|
|
etd->last_req_frame,
|
|
readl(imx21->regs + USBH_FRMNUB));
|
|
imx21->debug_unblocks++;
|
|
#endif
|
|
etd->active_count = 0;
|
|
/* End of kludge */
|
|
}
|
|
|
|
if (etd->ep == NULL || etd->urb == NULL) {
|
|
dev_dbg(imx21->dev,
|
|
"Interrupt for unexpected etd %d"
|
|
" ep=%p urb=%p\n",
|
|
etd_num, etd->ep, etd->urb);
|
|
disactivate_etd(imx21, etd_num);
|
|
continue;
|
|
}
|
|
|
|
if (usb_pipeisoc(etd->urb->pipe))
|
|
isoc_etd_done(hcd, etd_num);
|
|
else
|
|
nonisoc_etd_done(hcd, etd_num);
|
|
}
|
|
|
|
/* only enable SOF interrupt if it may be needed for the kludge */
|
|
if (enable_sof_int)
|
|
set_register_bits(imx21, USBH_SYSIEN, USBH_SYSIEN_SOFINT);
|
|
else
|
|
clear_register_bits(imx21, USBH_SYSIEN, USBH_SYSIEN_SOFINT);
|
|
|
|
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
}
|
|
|
|
static irqreturn_t imx21_irq(struct usb_hcd *hcd)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
u32 ints = readl(imx21->regs + USBH_SYSISR);
|
|
|
|
if (ints & USBH_SYSIEN_HERRINT)
|
|
dev_dbg(imx21->dev, "Scheduling error\n");
|
|
|
|
if (ints & USBH_SYSIEN_SORINT)
|
|
dev_dbg(imx21->dev, "Scheduling overrun\n");
|
|
|
|
if (ints & (USBH_SYSISR_DONEINT | USBH_SYSISR_SOFINT))
|
|
process_etds(hcd, imx21, ints & USBH_SYSISR_SOFINT);
|
|
|
|
writel(ints, imx21->regs + USBH_SYSISR);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void imx21_hc_endpoint_disable(struct usb_hcd *hcd,
|
|
struct usb_host_endpoint *ep)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
unsigned long flags;
|
|
struct ep_priv *ep_priv;
|
|
int i;
|
|
|
|
if (ep == NULL)
|
|
return;
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags);
|
|
ep_priv = ep->hcpriv;
|
|
dev_vdbg(imx21->dev, "disable ep=%p, ep->hcpriv=%p\n", ep, ep_priv);
|
|
|
|
if (!list_empty(&ep->urb_list))
|
|
dev_dbg(imx21->dev, "ep's URB list is not empty\n");
|
|
|
|
if (ep_priv != NULL) {
|
|
for (i = 0; i < NUM_ISO_ETDS; i++) {
|
|
if (ep_priv->etd[i] > -1)
|
|
dev_dbg(imx21->dev, "free etd %d for disable\n",
|
|
ep_priv->etd[i]);
|
|
|
|
free_etd(imx21, ep_priv->etd[i]);
|
|
}
|
|
kfree(ep_priv);
|
|
ep->hcpriv = NULL;
|
|
}
|
|
|
|
for (i = 0; i < USB_NUM_ETD; i++) {
|
|
if (imx21->etd[i].alloc && imx21->etd[i].ep == ep) {
|
|
dev_err(imx21->dev,
|
|
"Active etd %d for disabled ep=%p!\n", i, ep);
|
|
free_etd(imx21, i);
|
|
}
|
|
}
|
|
free_epdmem(imx21, ep);
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
}
|
|
|
|
/* =========================================== */
|
|
/* Hub handling */
|
|
/* =========================================== */
|
|
|
|
static int get_hub_descriptor(struct usb_hcd *hcd,
|
|
struct usb_hub_descriptor *desc)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
desc->bDescriptorType = 0x29; /* HUB descriptor */
|
|
desc->bHubContrCurrent = 0;
|
|
|
|
desc->bNbrPorts = readl(imx21->regs + USBH_ROOTHUBA)
|
|
& USBH_ROOTHUBA_NDNSTMPRT_MASK;
|
|
desc->bDescLength = 9;
|
|
desc->bPwrOn2PwrGood = 0;
|
|
desc->wHubCharacteristics = (__force __u16) cpu_to_le16(
|
|
0x0002 | /* No power switching */
|
|
0x0010 | /* No over current protection */
|
|
0);
|
|
|
|
desc->u.hs.DeviceRemovable[0] = 1 << 1;
|
|
desc->u.hs.DeviceRemovable[1] = ~0;
|
|
return 0;
|
|
}
|
|
|
|
static int imx21_hc_hub_status_data(struct usb_hcd *hcd, char *buf)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
int ports;
|
|
int changed = 0;
|
|
int i;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags);
|
|
ports = readl(imx21->regs + USBH_ROOTHUBA)
|
|
& USBH_ROOTHUBA_NDNSTMPRT_MASK;
|
|
if (ports > 7) {
|
|
ports = 7;
|
|
dev_err(imx21->dev, "ports %d > 7\n", ports);
|
|
}
|
|
for (i = 0; i < ports; i++) {
|
|
if (readl(imx21->regs + USBH_PORTSTAT(i)) &
|
|
(USBH_PORTSTAT_CONNECTSC |
|
|
USBH_PORTSTAT_PRTENBLSC |
|
|
USBH_PORTSTAT_PRTSTATSC |
|
|
USBH_PORTSTAT_OVRCURIC |
|
|
USBH_PORTSTAT_PRTRSTSC)) {
|
|
|
|
changed = 1;
|
|
buf[0] |= 1 << (i + 1);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
|
|
if (changed)
|
|
dev_info(imx21->dev, "Hub status changed\n");
|
|
return changed;
|
|
}
|
|
|
|
static int imx21_hc_hub_control(struct usb_hcd *hcd,
|
|
u16 typeReq,
|
|
u16 wValue, u16 wIndex, char *buf, u16 wLength)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
int rc = 0;
|
|
u32 status_write = 0;
|
|
|
|
switch (typeReq) {
|
|
case ClearHubFeature:
|
|
dev_dbg(imx21->dev, "ClearHubFeature\n");
|
|
switch (wValue) {
|
|
case C_HUB_OVER_CURRENT:
|
|
dev_dbg(imx21->dev, " OVER_CURRENT\n");
|
|
break;
|
|
case C_HUB_LOCAL_POWER:
|
|
dev_dbg(imx21->dev, " LOCAL_POWER\n");
|
|
break;
|
|
default:
|
|
dev_dbg(imx21->dev, " unknown\n");
|
|
rc = -EINVAL;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case ClearPortFeature:
|
|
dev_dbg(imx21->dev, "ClearPortFeature\n");
|
|
switch (wValue) {
|
|
case USB_PORT_FEAT_ENABLE:
|
|
dev_dbg(imx21->dev, " ENABLE\n");
|
|
status_write = USBH_PORTSTAT_CURCONST;
|
|
break;
|
|
case USB_PORT_FEAT_SUSPEND:
|
|
dev_dbg(imx21->dev, " SUSPEND\n");
|
|
status_write = USBH_PORTSTAT_PRTOVRCURI;
|
|
break;
|
|
case USB_PORT_FEAT_POWER:
|
|
dev_dbg(imx21->dev, " POWER\n");
|
|
status_write = USBH_PORTSTAT_LSDEVCON;
|
|
break;
|
|
case USB_PORT_FEAT_C_ENABLE:
|
|
dev_dbg(imx21->dev, " C_ENABLE\n");
|
|
status_write = USBH_PORTSTAT_PRTENBLSC;
|
|
break;
|
|
case USB_PORT_FEAT_C_SUSPEND:
|
|
dev_dbg(imx21->dev, " C_SUSPEND\n");
|
|
status_write = USBH_PORTSTAT_PRTSTATSC;
|
|
break;
|
|
case USB_PORT_FEAT_C_CONNECTION:
|
|
dev_dbg(imx21->dev, " C_CONNECTION\n");
|
|
status_write = USBH_PORTSTAT_CONNECTSC;
|
|
break;
|
|
case USB_PORT_FEAT_C_OVER_CURRENT:
|
|
dev_dbg(imx21->dev, " C_OVER_CURRENT\n");
|
|
status_write = USBH_PORTSTAT_OVRCURIC;
|
|
break;
|
|
case USB_PORT_FEAT_C_RESET:
|
|
dev_dbg(imx21->dev, " C_RESET\n");
|
|
status_write = USBH_PORTSTAT_PRTRSTSC;
|
|
break;
|
|
default:
|
|
dev_dbg(imx21->dev, " unknown\n");
|
|
rc = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
break;
|
|
|
|
case GetHubDescriptor:
|
|
dev_dbg(imx21->dev, "GetHubDescriptor\n");
|
|
rc = get_hub_descriptor(hcd, (void *)buf);
|
|
break;
|
|
|
|
case GetHubStatus:
|
|
dev_dbg(imx21->dev, " GetHubStatus\n");
|
|
*(__le32 *) buf = 0;
|
|
break;
|
|
|
|
case GetPortStatus:
|
|
dev_dbg(imx21->dev, "GetPortStatus: port: %d, 0x%x\n",
|
|
wIndex, USBH_PORTSTAT(wIndex - 1));
|
|
*(__le32 *) buf = readl(imx21->regs +
|
|
USBH_PORTSTAT(wIndex - 1));
|
|
break;
|
|
|
|
case SetHubFeature:
|
|
dev_dbg(imx21->dev, "SetHubFeature\n");
|
|
switch (wValue) {
|
|
case C_HUB_OVER_CURRENT:
|
|
dev_dbg(imx21->dev, " OVER_CURRENT\n");
|
|
break;
|
|
|
|
case C_HUB_LOCAL_POWER:
|
|
dev_dbg(imx21->dev, " LOCAL_POWER\n");
|
|
break;
|
|
default:
|
|
dev_dbg(imx21->dev, " unknown\n");
|
|
rc = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
break;
|
|
|
|
case SetPortFeature:
|
|
dev_dbg(imx21->dev, "SetPortFeature\n");
|
|
switch (wValue) {
|
|
case USB_PORT_FEAT_SUSPEND:
|
|
dev_dbg(imx21->dev, " SUSPEND\n");
|
|
status_write = USBH_PORTSTAT_PRTSUSPST;
|
|
break;
|
|
case USB_PORT_FEAT_POWER:
|
|
dev_dbg(imx21->dev, " POWER\n");
|
|
status_write = USBH_PORTSTAT_PRTPWRST;
|
|
break;
|
|
case USB_PORT_FEAT_RESET:
|
|
dev_dbg(imx21->dev, " RESET\n");
|
|
status_write = USBH_PORTSTAT_PRTRSTST;
|
|
break;
|
|
default:
|
|
dev_dbg(imx21->dev, " unknown\n");
|
|
rc = -EINVAL;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
dev_dbg(imx21->dev, " unknown\n");
|
|
rc = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (status_write)
|
|
writel(status_write, imx21->regs + USBH_PORTSTAT(wIndex - 1));
|
|
return rc;
|
|
}
|
|
|
|
/* =========================================== */
|
|
/* Host controller management */
|
|
/* =========================================== */
|
|
|
|
static int imx21_hc_reset(struct usb_hcd *hcd)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
unsigned long timeout;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags);
|
|
|
|
/* Reset the Host controller modules */
|
|
writel(USBOTG_RST_RSTCTRL | USBOTG_RST_RSTRH |
|
|
USBOTG_RST_RSTHSIE | USBOTG_RST_RSTHC,
|
|
imx21->regs + USBOTG_RST_CTRL);
|
|
|
|
/* Wait for reset to finish */
|
|
timeout = jiffies + HZ;
|
|
while (readl(imx21->regs + USBOTG_RST_CTRL) != 0) {
|
|
if (time_after(jiffies, timeout)) {
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
dev_err(imx21->dev, "timeout waiting for reset\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
spin_unlock_irq(&imx21->lock);
|
|
schedule_timeout_uninterruptible(1);
|
|
spin_lock_irq(&imx21->lock);
|
|
}
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int imx21_hc_start(struct usb_hcd *hcd)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
unsigned long flags;
|
|
int i, j;
|
|
u32 hw_mode = USBOTG_HWMODE_CRECFG_HOST;
|
|
u32 usb_control = 0;
|
|
|
|
hw_mode |= ((imx21->pdata->host_xcvr << USBOTG_HWMODE_HOSTXCVR_SHIFT) &
|
|
USBOTG_HWMODE_HOSTXCVR_MASK);
|
|
hw_mode |= ((imx21->pdata->otg_xcvr << USBOTG_HWMODE_OTGXCVR_SHIFT) &
|
|
USBOTG_HWMODE_OTGXCVR_MASK);
|
|
|
|
if (imx21->pdata->host1_txenoe)
|
|
usb_control |= USBCTRL_HOST1_TXEN_OE;
|
|
|
|
if (!imx21->pdata->host1_xcverless)
|
|
usb_control |= USBCTRL_HOST1_BYP_TLL;
|
|
|
|
if (imx21->pdata->otg_ext_xcvr)
|
|
usb_control |= USBCTRL_OTC_RCV_RXDP;
|
|
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags);
|
|
|
|
writel((USBOTG_CLK_CTRL_HST | USBOTG_CLK_CTRL_MAIN),
|
|
imx21->regs + USBOTG_CLK_CTRL);
|
|
writel(hw_mode, imx21->regs + USBOTG_HWMODE);
|
|
writel(usb_control, imx21->regs + USBCTRL);
|
|
writel(USB_MISCCONTROL_SKPRTRY | USB_MISCCONTROL_ARBMODE,
|
|
imx21->regs + USB_MISCCONTROL);
|
|
|
|
/* Clear the ETDs */
|
|
for (i = 0; i < USB_NUM_ETD; i++)
|
|
for (j = 0; j < 4; j++)
|
|
etd_writel(imx21, i, j, 0);
|
|
|
|
/* Take the HC out of reset */
|
|
writel(USBH_HOST_CTRL_HCUSBSTE_OPERATIONAL | USBH_HOST_CTRL_CTLBLKSR_1,
|
|
imx21->regs + USBH_HOST_CTRL);
|
|
|
|
/* Enable ports */
|
|
if (imx21->pdata->enable_otg_host)
|
|
writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST,
|
|
imx21->regs + USBH_PORTSTAT(0));
|
|
|
|
if (imx21->pdata->enable_host1)
|
|
writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST,
|
|
imx21->regs + USBH_PORTSTAT(1));
|
|
|
|
if (imx21->pdata->enable_host2)
|
|
writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST,
|
|
imx21->regs + USBH_PORTSTAT(2));
|
|
|
|
|
|
hcd->state = HC_STATE_RUNNING;
|
|
|
|
/* Enable host controller interrupts */
|
|
set_register_bits(imx21, USBH_SYSIEN,
|
|
USBH_SYSIEN_HERRINT |
|
|
USBH_SYSIEN_DONEINT | USBH_SYSIEN_SORINT);
|
|
set_register_bits(imx21, USBOTG_CINT_STEN, USBOTG_HCINT);
|
|
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void imx21_hc_stop(struct usb_hcd *hcd)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags);
|
|
|
|
writel(0, imx21->regs + USBH_SYSIEN);
|
|
clear_register_bits(imx21, USBOTG_CINT_STEN, USBOTG_HCINT);
|
|
clear_register_bits(imx21, USBOTG_CLK_CTRL_HST | USBOTG_CLK_CTRL_MAIN,
|
|
USBOTG_CLK_CTRL);
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
}
|
|
|
|
/* =========================================== */
|
|
/* Driver glue */
|
|
/* =========================================== */
|
|
|
|
static struct hc_driver imx21_hc_driver = {
|
|
.description = hcd_name,
|
|
.product_desc = "IMX21 USB Host Controller",
|
|
.hcd_priv_size = sizeof(struct imx21),
|
|
|
|
.flags = HCD_USB11,
|
|
.irq = imx21_irq,
|
|
|
|
.reset = imx21_hc_reset,
|
|
.start = imx21_hc_start,
|
|
.stop = imx21_hc_stop,
|
|
|
|
/* I/O requests */
|
|
.urb_enqueue = imx21_hc_urb_enqueue,
|
|
.urb_dequeue = imx21_hc_urb_dequeue,
|
|
.endpoint_disable = imx21_hc_endpoint_disable,
|
|
|
|
/* scheduling support */
|
|
.get_frame_number = imx21_hc_get_frame,
|
|
|
|
/* Root hub support */
|
|
.hub_status_data = imx21_hc_hub_status_data,
|
|
.hub_control = imx21_hc_hub_control,
|
|
|
|
};
|
|
|
|
static struct mx21_usbh_platform_data default_pdata = {
|
|
.host_xcvr = MX21_USBXCVR_TXDIF_RXDIF,
|
|
.otg_xcvr = MX21_USBXCVR_TXDIF_RXDIF,
|
|
.enable_host1 = 1,
|
|
.enable_host2 = 1,
|
|
.enable_otg_host = 1,
|
|
|
|
};
|
|
|
|
static int imx21_remove(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
remove_debug_files(imx21);
|
|
usb_remove_hcd(hcd);
|
|
|
|
if (res != NULL) {
|
|
clk_disable_unprepare(imx21->clk);
|
|
clk_put(imx21->clk);
|
|
iounmap(imx21->regs);
|
|
release_mem_region(res->start, resource_size(res));
|
|
}
|
|
|
|
kfree(hcd);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int imx21_probe(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd;
|
|
struct imx21 *imx21;
|
|
struct resource *res;
|
|
int ret;
|
|
int irq;
|
|
|
|
printk(KERN_INFO "%s\n", imx21_hc_driver.product_desc);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -ENODEV;
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return -ENXIO;
|
|
|
|
hcd = usb_create_hcd(&imx21_hc_driver,
|
|
&pdev->dev, dev_name(&pdev->dev));
|
|
if (hcd == NULL) {
|
|
dev_err(&pdev->dev, "Cannot create hcd (%s)\n",
|
|
dev_name(&pdev->dev));
|
|
return -ENOMEM;
|
|
}
|
|
|
|
imx21 = hcd_to_imx21(hcd);
|
|
imx21->hcd = hcd;
|
|
imx21->dev = &pdev->dev;
|
|
imx21->pdata = dev_get_platdata(&pdev->dev);
|
|
if (!imx21->pdata)
|
|
imx21->pdata = &default_pdata;
|
|
|
|
spin_lock_init(&imx21->lock);
|
|
INIT_LIST_HEAD(&imx21->dmem_list);
|
|
INIT_LIST_HEAD(&imx21->queue_for_etd);
|
|
INIT_LIST_HEAD(&imx21->queue_for_dmem);
|
|
create_debug_files(imx21);
|
|
|
|
res = request_mem_region(res->start, resource_size(res), hcd_name);
|
|
if (!res) {
|
|
ret = -EBUSY;
|
|
goto failed_request_mem;
|
|
}
|
|
|
|
imx21->regs = ioremap(res->start, resource_size(res));
|
|
if (imx21->regs == NULL) {
|
|
dev_err(imx21->dev, "Cannot map registers\n");
|
|
ret = -ENOMEM;
|
|
goto failed_ioremap;
|
|
}
|
|
|
|
/* Enable clocks source */
|
|
imx21->clk = clk_get(imx21->dev, NULL);
|
|
if (IS_ERR(imx21->clk)) {
|
|
dev_err(imx21->dev, "no clock found\n");
|
|
ret = PTR_ERR(imx21->clk);
|
|
goto failed_clock_get;
|
|
}
|
|
|
|
ret = clk_set_rate(imx21->clk, clk_round_rate(imx21->clk, 48000000));
|
|
if (ret)
|
|
goto failed_clock_set;
|
|
ret = clk_prepare_enable(imx21->clk);
|
|
if (ret)
|
|
goto failed_clock_enable;
|
|
|
|
dev_info(imx21->dev, "Hardware HC revision: 0x%02X\n",
|
|
(readl(imx21->regs + USBOTG_HWMODE) >> 16) & 0xFF);
|
|
|
|
ret = usb_add_hcd(hcd, irq, 0);
|
|
if (ret != 0) {
|
|
dev_err(imx21->dev, "usb_add_hcd() returned %d\n", ret);
|
|
goto failed_add_hcd;
|
|
}
|
|
device_wakeup_enable(hcd->self.controller);
|
|
|
|
return 0;
|
|
|
|
failed_add_hcd:
|
|
clk_disable_unprepare(imx21->clk);
|
|
failed_clock_enable:
|
|
failed_clock_set:
|
|
clk_put(imx21->clk);
|
|
failed_clock_get:
|
|
iounmap(imx21->regs);
|
|
failed_ioremap:
|
|
release_mem_region(res->start, resource_size(res));
|
|
failed_request_mem:
|
|
remove_debug_files(imx21);
|
|
usb_put_hcd(hcd);
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver imx21_hcd_driver = {
|
|
.driver = {
|
|
.name = hcd_name,
|
|
},
|
|
.probe = imx21_probe,
|
|
.remove = imx21_remove,
|
|
.suspend = NULL,
|
|
.resume = NULL,
|
|
};
|
|
|
|
module_platform_driver(imx21_hcd_driver);
|
|
|
|
MODULE_DESCRIPTION("i.MX21 USB Host controller");
|
|
MODULE_AUTHOR("Martin Fuzzey");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:imx21-hcd");
|