linux_dsm_epyc7002/drivers/gpio/gpio-pisosr.c
Matti Vaittinen e42615ec23 gpio: Use new GPIO_LINE_DIRECTION
It's hard for occasional GPIO code reader/writer to know if values 0/1
equal to IN or OUT. Use defined GPIO_LINE_DIRECTION_IN and
GPIO_LINE_DIRECTION_OUT to help them out.

NOTE - for gpio-amd-fch and gpio-bd9571mwv:
This commit also changes the return value for direction get to equal 1
for direction INPUT. Prior this commit these drivers might have
returned some other positive value but 1 for INPUT.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-07 09:27:48 +01:00

206 lines
5.0 KiB
C

/*
* Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
* Andrew F. Davis <afd@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether expressed or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License version 2 for more details.
*/
#include <linux/bitmap.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/gpio/driver.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/spi/spi.h>
#define DEFAULT_NGPIO 8
/**
* struct pisosr_gpio - GPIO driver data
* @chip: GPIO controller chip
* @spi: SPI device pointer
* @buffer: Buffer for device reads
* @buffer_size: Size of buffer
* @load_gpio: GPIO pin used to load input into device
* @lock: Protects read sequences
*/
struct pisosr_gpio {
struct gpio_chip chip;
struct spi_device *spi;
u8 *buffer;
size_t buffer_size;
struct gpio_desc *load_gpio;
struct mutex lock;
};
static int pisosr_gpio_refresh(struct pisosr_gpio *gpio)
{
int ret;
mutex_lock(&gpio->lock);
if (gpio->load_gpio) {
gpiod_set_value_cansleep(gpio->load_gpio, 1);
udelay(1); /* registers load time (~10ns) */
gpiod_set_value_cansleep(gpio->load_gpio, 0);
udelay(1); /* registers recovery time (~5ns) */
}
ret = spi_read(gpio->spi, gpio->buffer, gpio->buffer_size);
mutex_unlock(&gpio->lock);
return ret;
}
static int pisosr_gpio_get_direction(struct gpio_chip *chip,
unsigned offset)
{
/* This device always input */
return GPIO_LINE_DIRECTION_IN;
}
static int pisosr_gpio_direction_input(struct gpio_chip *chip,
unsigned offset)
{
/* This device always input */
return 0;
}
static int pisosr_gpio_direction_output(struct gpio_chip *chip,
unsigned offset, int value)
{
/* This device is input only */
return -EINVAL;
}
static int pisosr_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct pisosr_gpio *gpio = gpiochip_get_data(chip);
/* Refresh may not always be needed */
pisosr_gpio_refresh(gpio);
return (gpio->buffer[offset / 8] >> (offset % 8)) & 0x1;
}
static int pisosr_gpio_get_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
struct pisosr_gpio *gpio = gpiochip_get_data(chip);
unsigned int nbytes = DIV_ROUND_UP(chip->ngpio, 8);
unsigned int i, j;
pisosr_gpio_refresh(gpio);
bitmap_zero(bits, chip->ngpio);
for (i = 0; i < nbytes; i++) {
j = i / sizeof(unsigned long);
bits[j] |= ((unsigned long) gpio->buffer[i])
<< (8 * (i % sizeof(unsigned long)));
}
return 0;
}
static const struct gpio_chip template_chip = {
.label = "pisosr-gpio",
.owner = THIS_MODULE,
.get_direction = pisosr_gpio_get_direction,
.direction_input = pisosr_gpio_direction_input,
.direction_output = pisosr_gpio_direction_output,
.get = pisosr_gpio_get,
.get_multiple = pisosr_gpio_get_multiple,
.base = -1,
.ngpio = DEFAULT_NGPIO,
.can_sleep = true,
};
static int pisosr_gpio_probe(struct spi_device *spi)
{
struct device *dev = &spi->dev;
struct pisosr_gpio *gpio;
int ret;
gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL);
if (!gpio)
return -ENOMEM;
spi_set_drvdata(spi, gpio);
gpio->chip = template_chip;
gpio->chip.parent = dev;
of_property_read_u16(dev->of_node, "ngpios", &gpio->chip.ngpio);
gpio->spi = spi;
gpio->buffer_size = DIV_ROUND_UP(gpio->chip.ngpio, 8);
gpio->buffer = devm_kzalloc(dev, gpio->buffer_size, GFP_KERNEL);
if (!gpio->buffer)
return -ENOMEM;
gpio->load_gpio = devm_gpiod_get_optional(dev, "load", GPIOD_OUT_LOW);
if (IS_ERR(gpio->load_gpio)) {
ret = PTR_ERR(gpio->load_gpio);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Unable to allocate load GPIO\n");
return ret;
}
mutex_init(&gpio->lock);
ret = gpiochip_add_data(&gpio->chip, gpio);
if (ret < 0) {
dev_err(dev, "Unable to register gpiochip\n");
return ret;
}
return 0;
}
static int pisosr_gpio_remove(struct spi_device *spi)
{
struct pisosr_gpio *gpio = spi_get_drvdata(spi);
gpiochip_remove(&gpio->chip);
mutex_destroy(&gpio->lock);
return 0;
}
static const struct spi_device_id pisosr_gpio_id_table[] = {
{ "pisosr-gpio", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(spi, pisosr_gpio_id_table);
static const struct of_device_id pisosr_gpio_of_match_table[] = {
{ .compatible = "pisosr-gpio", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, pisosr_gpio_of_match_table);
static struct spi_driver pisosr_gpio_driver = {
.driver = {
.name = "pisosr-gpio",
.of_match_table = pisosr_gpio_of_match_table,
},
.probe = pisosr_gpio_probe,
.remove = pisosr_gpio_remove,
.id_table = pisosr_gpio_id_table,
};
module_spi_driver(pisosr_gpio_driver);
MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
MODULE_DESCRIPTION("SPI Compatible PISO Shift Register GPIO Driver");
MODULE_LICENSE("GPL v2");