mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
aed09a4a48
Set default mode for vaudio, which may be left in standby mode if the system is booted via kexec from Android. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
261 lines
6.3 KiB
Plaintext
261 lines
6.3 KiB
Plaintext
/*
|
|
* Common CPCAP configuration used on Motorola phones
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
&mcspi1 {
|
|
cpcap: pmic@0 {
|
|
compatible = "motorola,cpcap", "st,6556002";
|
|
reg = <0>; /* cs0 */
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
spi-max-frequency = <3000000>;
|
|
spi-cs-high;
|
|
|
|
cpcap_adc: adc {
|
|
compatible = "motorola,mapphone-cpcap-adc";
|
|
interrupts-extended = <&cpcap 8 0>;
|
|
interrupt-names = "adcdone";
|
|
#io-channel-cells = <1>;
|
|
};
|
|
|
|
cpcap_battery: battery {
|
|
compatible = "motorola,cpcap-battery";
|
|
interrupts-extended = <
|
|
&cpcap 6 0 &cpcap 5 0 &cpcap 3 0
|
|
&cpcap 20 0 &cpcap 54 0
|
|
>;
|
|
interrupt-names =
|
|
"eol", "lowbph", "lowbpl",
|
|
"chrgcurr1", "battdetb";
|
|
io-channels = <&cpcap_adc 0 &cpcap_adc 1
|
|
&cpcap_adc 5 &cpcap_adc 6>;
|
|
io-channel-names = "battdetb", "battp",
|
|
"chg_isense", "batti";
|
|
power-supplies = <&cpcap_charger>;
|
|
};
|
|
|
|
cpcap_charger: charger {
|
|
compatible = "motorola,mapphone-cpcap-charger";
|
|
interrupts-extended = <
|
|
&cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
|
|
&cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
|
|
>;
|
|
interrupt-names =
|
|
"chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
|
|
"rvrs_mode", "chrgcurr1", "vbusvld", "battdetb";
|
|
mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
|
|
&gpio3 23 GPIO_ACTIVE_LOW>;
|
|
io-channels = <&cpcap_adc 0 &cpcap_adc 1
|
|
&cpcap_adc 2 &cpcap_adc 5
|
|
&cpcap_adc 6>;
|
|
io-channel-names = "battdetb", "battp",
|
|
"vbus", "chg_isense",
|
|
"batti";
|
|
};
|
|
|
|
cpcap_regulator: regulator {
|
|
compatible = "motorola,mapphone-cpcap-regulator";
|
|
|
|
cpcap_regulators: regulators {
|
|
};
|
|
};
|
|
|
|
cpcap_rtc: rtc {
|
|
compatible = "motorola,cpcap-rtc";
|
|
|
|
interrupt-parent = <&cpcap>;
|
|
interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>;
|
|
};
|
|
|
|
power_button: button {
|
|
compatible = "motorola,cpcap-pwrbutton";
|
|
|
|
interrupts = <23 IRQ_TYPE_NONE>;
|
|
};
|
|
|
|
cpcap_usb2_phy: phy {
|
|
compatible = "motorola,mapphone-cpcap-usb-phy";
|
|
pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
|
|
pinctrl-1 = <&usb_ulpi_pins>;
|
|
pinctrl-2 = <&usb_utmi_pins>;
|
|
pinctrl-3 = <&uart3_pins>;
|
|
pinctrl-names = "default", "ulpi", "utmi", "uart";
|
|
#phy-cells = <0>;
|
|
interrupts-extended = <
|
|
&cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
|
|
&cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
|
|
&cpcap 48 1
|
|
>;
|
|
interrupt-names =
|
|
"id_ground", "id_float", "se0conn", "vbusvld",
|
|
"sessvld", "sessend", "se1", "dm", "dp";
|
|
mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
|
|
&gpio1 0 GPIO_ACTIVE_HIGH>;
|
|
io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
|
|
io-channel-names = "vbus", "id";
|
|
vusb-supply = <&vusb>;
|
|
};
|
|
|
|
led_red: led-red {
|
|
compatible = "motorola,cpcap-led-red";
|
|
vdd-supply = <&sw5>;
|
|
label = "status-led:red";
|
|
};
|
|
|
|
led_green: led-green {
|
|
compatible = "motorola,cpcap-led-green";
|
|
vdd-supply = <&sw5>;
|
|
label = "status-led:green";
|
|
};
|
|
|
|
led_blue: led-blue {
|
|
compatible = "motorola,cpcap-led-blue";
|
|
vdd-supply = <&sw5>;
|
|
label = "status-led:blue";
|
|
};
|
|
|
|
led_adl: led-adl {
|
|
compatible = "motorola,cpcap-led-adl";
|
|
vdd-supply = <&sw5>;
|
|
label = "button-backlight";
|
|
};
|
|
|
|
led_cp: led-cp {
|
|
compatible = "motorola,cpcap-led-cp";
|
|
vdd-supply = <&sw5>;
|
|
label = "shift-key-light";
|
|
};
|
|
};
|
|
};
|
|
|
|
&cpcap_regulators {
|
|
sw5: SW5 {
|
|
regulator-min-microvolt = <5050000>;
|
|
regulator-max-microvolt = <5050000>;
|
|
regulator-enable-ramp-delay = <50000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vcam: VCAM {
|
|
regulator-min-microvolt = <2900000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
regulator-enable-ramp-delay = <1000>;
|
|
};
|
|
|
|
/* Used by DSS */
|
|
vcsi: VCSI {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-enable-ramp-delay = <1000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdac: VDAC {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-enable-ramp-delay = <1000>;
|
|
};
|
|
|
|
vdig: VDIG {
|
|
regulator-min-microvolt = <1875000>;
|
|
regulator-max-microvolt = <1875000>;
|
|
regulator-enable-ramp-delay = <1000>;
|
|
};
|
|
|
|
vfuse: VFUSE {
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <3150000>;
|
|
regulator-enable-ramp-delay = <1000>;
|
|
};
|
|
|
|
vhvio: VHVIO {
|
|
regulator-min-microvolt = <2775000>;
|
|
regulator-max-microvolt = <2775000>;
|
|
regulator-enable-ramp-delay = <1000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
/* Used by eMMC at mmc2 */
|
|
vsdio: VSDIO {
|
|
regulator-min-microvolt = <2900000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
regulator-enable-ramp-delay = <1000>;
|
|
};
|
|
|
|
vpll: VPLL {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-enable-ramp-delay = <100>;
|
|
};
|
|
|
|
vrf1: VRF1 {
|
|
regulator-min-microvolt = <2775000>;
|
|
regulator-max-microvolt = <2775000>;
|
|
regulator-enable-ramp-delay = <1000>;
|
|
};
|
|
|
|
vrf2: VRF2 {
|
|
regulator-min-microvolt = <2775000>;
|
|
regulator-max-microvolt = <2775000>;
|
|
regulator-enable-ramp-delay = <1000>;
|
|
};
|
|
|
|
vrfref: VRFREF {
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2775000>;
|
|
regulator-enable-ramp-delay = <100>;
|
|
};
|
|
|
|
vwlan1: VWLAN1 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1900000>;
|
|
regulator-enable-ramp-delay = <1000>;
|
|
};
|
|
|
|
/* Used by micro-SDIO at mmc1 */
|
|
vwlan2: VWLAN2 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-enable-ramp-delay = <1000>;
|
|
};
|
|
|
|
vsim: VSIM {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
regulator-enable-ramp-delay = <1000>;
|
|
};
|
|
|
|
vsimcard: VSIMCARD {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
regulator-enable-ramp-delay = <1000>;
|
|
};
|
|
|
|
vvib: VVIB {
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-enable-ramp-delay = <500>;
|
|
};
|
|
|
|
vusb: VUSB {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-enable-ramp-delay = <1000>;
|
|
};
|
|
|
|
vaudio: VAUDIO {
|
|
regulator-min-microvolt = <2775000>;
|
|
regulator-max-microvolt = <2775000>;
|
|
regulator-enable-ramp-delay = <1000>;
|
|
regulator-initial-mode = <0x00>; /* NORMAL */
|
|
};
|
|
};
|