linux_dsm_epyc7002/arch/arm
Eric Miao 4a3dcd35c8 [ARM] 4438/1: PXA: remove #ifdef .. #endif from pxa_gpio_demux_handler()
1. use GPIO_IRQ_mask[] to select those bits of interest, actually
   only those "unmasked" GPIO IRQs with their corresponding bits
   in GPIO_IRQ_mask[] set to "1" should be checked

2. remove #ifdef PXA_LAST_GPIO > 96 .. #endif, GPIO_IRQ_mask[]
   is used to mask out the irrelevant bits, so that even though
   the GEDR3 on PXA25x is reserved, it will be masked, and the
   following code will never run. Another point is that GPIO85-
   GPIO95 bits within GEDR2 will also be masked out on PXA25x

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:14 +01:00
..
boot [ARM] 4449/1: more entries in arch/arm/boot/.gitignore 2007-06-25 20:37:35 +01:00
common [ARM] pxa: Fix PXA27x suspend type validation, remove pxa_pm_prepare() 2007-07-12 14:28:06 +01:00
configs [ARM] 4333/2: KS8695: Micrel Development board 2007-05-11 22:02:55 +01:00
kernel [ARM] always allow dump_stack() to produce a backtrace 2007-07-05 19:59:51 +01:00
lib [ARM] spelling fixes 2007-05-20 20:10:32 +01:00
mach-aaec2000 Add IRQF_IRQPOLL flag on arm 2007-05-08 11:15:22 -07:00
mach-at91 PM: introduce set_target method in pm_ops 2007-07-01 12:29:44 -07:00
mach-clps711x Add IRQF_IRQPOLL flag on arm 2007-05-08 11:15:22 -07:00
mach-clps7500 Add IRQF_IRQPOLL flag on arm 2007-05-08 11:15:22 -07:00
mach-davinci [ARM] 4303/3: base kernel support for TI DaVinci 2007-05-11 17:26:55 +01:00
mach-ebsa110 [ARM] EBSA110: fix build errors caused by missing "const" 2007-05-11 17:20:02 +01:00
mach-ep93xx Add IRQF_IRQPOLL flag on arm 2007-05-08 11:15:22 -07:00
mach-footbridge [ARM] Fix some section mismatch warnings 2007-05-30 17:48:45 +01:00
mach-h720x [ARM] spelling fixes 2007-05-20 20:10:32 +01:00
mach-imx [ARM] Fix some section mismatch warnings 2007-05-30 17:48:45 +01:00
mach-integrator [ARM] integrator: fix pci_v3 compile error with DEBUG_LL 2007-05-17 10:16:55 +01:00
mach-iop13xx Merge master.kernel.org:/home/rmk/linux-2.6-arm 2007-05-21 10:00:22 -07:00
mach-iop32x [ARM] 4383/1: iop: fix usage of '__init' and 'inline' in iop files 2007-05-16 15:35:27 +01:00
mach-iop33x [ARM] 4383/1: iop: fix usage of '__init' and 'inline' in iop files 2007-05-16 15:35:27 +01:00
mach-ixp4xx [ARM] 4410/1: Remove extern declarations in coyote/ixdpg425-pci.c 2007-05-30 13:15:39 +01:00
mach-ixp23xx [ARM] Fix some section mismatch warnings 2007-05-30 17:48:45 +01:00
mach-ixp2000 [ARM] Fix some section mismatch warnings 2007-05-30 17:48:45 +01:00
mach-ks8695 [ARM] 4333/2: KS8695: Micrel Development board 2007-05-11 22:02:55 +01:00
mach-l7200 [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-lh7a40x [ARM] spelling fixes 2007-05-20 20:10:32 +01:00
mach-netx Add IRQF_IRQPOLL flag on arm 2007-05-08 11:15:22 -07:00
mach-ns9xxx [ARM] spelling fixes 2007-05-20 20:10:32 +01:00
mach-omap1 [ARM] spelling fixes 2007-05-20 20:10:32 +01:00
mach-omap2 [ARM] spelling fixes 2007-05-20 20:10:32 +01:00
mach-pnx4008 [ARM] Spinlock initializer cleanup 2007-05-11 17:38:04 +01:00
mach-pxa [ARM] 4438/1: PXA: remove #ifdef .. #endif from pxa_gpio_demux_handler() 2007-07-12 14:28:14 +01:00
mach-realview [ARM] spelling fixes 2007-05-20 20:10:32 +01:00
mach-rpc [ARM] Add platform support for PATA on RiscPC 2007-05-03 14:16:55 +01:00
mach-s3c2400 [ARM] 4157/2: S3C24XX: move arch/arch/mach-s3c2410 into cpu components 2007-02-11 17:36:09 +00:00
mach-s3c2410 [ARM] 4415/1: AML5900: fix sparse warnings from map_io 2007-05-30 13:15:30 +01:00
mach-s3c2412 [ARM] 4412/1: S3C2412: reset errata fix 2007-05-30 13:15:23 +01:00
mach-s3c2440 [ARM] 4445/1: ANUBIS: Fix CPLD registers 2007-06-11 09:09:34 +01:00
mach-s3c2442 [ARM] 4157/2: S3C24XX: move arch/arch/mach-s3c2410 into cpu components 2007-02-11 17:36:09 +00:00
mach-s3c2443 [ARM] 4414/1: S3C2443: sparse fix for clock.c 2007-05-30 13:15:26 +01:00
mach-sa1100 [ARM] Fix some section mismatch warnings 2007-05-30 17:48:45 +01:00
mach-shark Add IRQF_IRQPOLL flag on arm 2007-05-08 11:15:22 -07:00
mach-versatile [ARM] 4454/1: Use word accesses in Versatile PCI config reads 2007-07-02 13:39:35 +01:00
mm [ARM] Fix non-page aligned boot time mappings 2007-07-04 21:16:33 +01:00
nwfpe [ARM] 4416/1: NWFPE: fix undeclared symbols 2007-05-30 13:15:34 +01:00
oprofile [ARM] Solve buggy smp_processor_id() usage 2007-06-02 21:31:49 +01:00
plat-iop Merge master.kernel.org:/home/rmk/linux-2.6-arm 2007-05-21 10:00:22 -07:00
plat-omap [ARM] spelling fixes 2007-05-20 20:10:32 +01:00
plat-s3c24xx [ARM] spelling fixes 2007-05-20 20:10:32 +01:00
tools [ARM] Update mach-types 2007-05-11 19:54:39 +01:00
vfp [ARM] VFP: fix section mismatch error 2007-06-10 12:22:20 +01:00
Kconfig [ARM] 4376/1: Selects GENERIC_GPIO for ARCH_IXP4XX in Kconfig 2007-05-16 15:35:25 +01:00
Kconfig-nommu [ARM] nommu: manage the CP15 things 2006-09-27 17:34:30 +01:00
Kconfig.debug [ARM] Remove DEBUG_WAITQ 2006-11-30 12:24:47 +00:00
Makefile [ARM] 4331/3: Support for Micrel/Kendin KS8695 processor 2007-05-11 22:02:48 +01:00