linux_dsm_epyc7002/arch/arm/plat-mxc/ehci.c
Uwe Kleine-König a060656240 ARM: imx: ehci: use void __iomem * to hold i/o addresses
This fixes:

	arch/arm/plat-mxc/ehci.c: In function 'mxc_initialize_usb_hw':
	arch/arm/plat-mxc/ehci.c:260: warning: assignment makes integer from pointer without a cast
	arch/arm/plat-mxc/ehci.c:263: warning: assignment makes integer from pointer without a cast
	arch/arm/plat-mxc/ehci.c:270: warning: assignment makes integer from pointer without a cast

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-27 12:53:01 +02:00

331 lines
9.3 KiB
C

/*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/mxc_ehci.h>
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX31_OTG_SIC_SHIFT 29
#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT)
#define MX31_OTG_PM_BIT (1 << 24)
#define MX31_H2_SIC_SHIFT 21
#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT)
#define MX31_H2_PM_BIT (1 << 16)
#define MX31_H2_DT_BIT (1 << 5)
#define MX31_H1_SIC_SHIFT 13
#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT)
#define MX31_H1_PM_BIT (1 << 8)
#define MX31_H1_DT_BIT (1 << 4)
#define MX35_OTG_SIC_SHIFT 29
#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT)
#define MX35_OTG_PM_BIT (1 << 24)
#define MX35_H1_SIC_SHIFT 21
#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT)
#define MX35_H1_PM_BIT (1 << 8)
#define MX35_H1_IPPUE_UP_BIT (1 << 7)
#define MX35_H1_IPPUE_DOWN_BIT (1 << 6)
#define MX35_H1_TLL_BIT (1 << 5)
#define MX35_H1_USBTE_BIT (1 << 4)
#define MXC_OTG_OFFSET 0
#define MXC_H1_OFFSET 0x200
/* USB_CTRL */
#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) /* OTG wakeup intr enable */
#define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */
#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */
#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */
#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */
/* USB_PHY_CTRL_FUNC */
#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */
#define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */
#define MXC_USBCMD_OFFSET 0x140
/* USBCMD */
#define MXC_UCMD_ITC_NO_THRESHOLD_MASK (~(0xff << 16)) /* Interrupt Threshold Control */
int mxc_initialize_usb_hw(int port, unsigned int flags)
{
unsigned int v;
#if defined(CONFIG_ARCH_MX25)
if (cpu_is_mx25()) {
v = readl(MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
switch (port) {
case 0: /* OTG port */
v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX35_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX35_OTG_PM_BIT;
break;
case 1: /* H1 port */
v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX35_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX35_H1_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX35_H1_TLL_BIT;
if (flags & MXC_EHCI_INTERNAL_PHY)
v |= MX35_H1_USBTE_BIT;
if (flags & MXC_EHCI_IPPUE_DOWN)
v |= MX35_H1_IPPUE_DOWN_BIT;
if (flags & MXC_EHCI_IPPUE_UP)
v |= MX35_H1_IPPUE_UP_BIT;
break;
default:
return -EINVAL;
}
writel(v, MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
return 0;
}
#endif /* CONFIG_ARCH_MX25 */
#if defined(CONFIG_ARCH_MX3)
if (cpu_is_mx31()) {
v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
switch (port) {
case 0: /* OTG port */
v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX31_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_OTG_PM_BIT;
break;
case 1: /* H1 port */
v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX31_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_H1_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX31_H1_DT_BIT;
break;
case 2: /* H2 port */
v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX31_H2_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_H2_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX31_H2_DT_BIT;
break;
default:
return -EINVAL;
}
writel(v, MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
return 0;
}
if (cpu_is_mx35()) {
v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
switch (port) {
case 0: /* OTG port */
v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX35_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX35_OTG_PM_BIT;
break;
case 1: /* H1 port */
v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX35_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX35_H1_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX35_H1_TLL_BIT;
if (flags & MXC_EHCI_INTERNAL_PHY)
v |= MX35_H1_USBTE_BIT;
if (flags & MXC_EHCI_IPPUE_DOWN)
v |= MX35_H1_IPPUE_DOWN_BIT;
if (flags & MXC_EHCI_IPPUE_UP)
v |= MX35_H1_IPPUE_UP_BIT;
break;
default:
return -EINVAL;
}
writel(v, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
return 0;
}
#endif /* CONFIG_ARCH_MX3 */
#ifdef CONFIG_MACH_MX27
if (cpu_is_mx27()) {
/* On i.MX27 we can use the i.MX31 USBCTRL bits, they
* are identical
*/
v = readl(MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
switch (port) {
case 0: /* OTG port */
v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX31_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_OTG_PM_BIT;
break;
case 1: /* H1 port */
v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX31_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_H1_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX31_H1_DT_BIT;
break;
case 2: /* H2 port */
v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX31_H2_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_H2_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX31_H2_DT_BIT;
break;
default:
return -EINVAL;
}
writel(v, MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
return 0;
}
#endif /* CONFIG_MACH_MX27 */
#ifdef CONFIG_ARCH_MX51
if (cpu_is_mx51()) {
void __iomem *usb_base;
void __iomem *usbotg_base;
void __iomem *usbother_base;
int ret = 0;
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
switch (port) {
case 0: /* OTG port */
usbotg_base = usb_base + MXC_OTG_OFFSET;
break;
case 1: /* Host 1 port */
usbotg_base = usb_base + MXC_H1_OFFSET;
break;
default:
printk(KERN_ERR"%s no such port %d\n", __func__, port);
ret = -ENOENT;
goto error;
}
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
switch (port) {
case 0: /*OTG port */
if (flags & MXC_EHCI_INTERNAL_PHY) {
v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
v |= (MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is not used */
else
v &= ~(MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is used */
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
if (flags & MXC_EHCI_WAKEUP_ENABLED)
v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
else
v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
}
break;
case 1: /* Host 1 */
/*Host ULPI */
v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
if (flags & MXC_EHCI_WAKEUP_ENABLED)
v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */
else
v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
else
v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
else
v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
/* Interrupt Threshold Control:Immediate (no threshold) */
v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
__raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
break;
}
error:
iounmap(usb_base);
return ret;
}
#endif
printk(KERN_WARNING
"%s() unable to setup USBCONTROL for this CPU\n", __func__);
return -EINVAL;
}
EXPORT_SYMBOL(mxc_initialize_usb_hw);