mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 17:56:39 +07:00
b62c3a1158
We program RTC time using SET_TIME_WRITE register and read the RTC current time using CURRENT_TIME register. When we set the time by writing into SET_TIME_WRITE Register and immediately try to read the rtc time from CURRENT_TIME register, the previous old value is returned instead of the new loaded time. This is because RTC takes nearly 1 sec to update the new loaded value into the CURRENT_TIME register. This behaviour is expected in our RTC IP. This patch updates the driver to read the current time from SET_TIME_WRITE register instead of CURRENT_TIME when rtc time is requested within an 1sec period after setting the RTC time. Doing so will ensure the correct time is given to the user. Since there is a delay of 1sec in updating the CURRENT_TIME we are loading set time +1sec while programming the SET_TIME_WRITE register, doing this will give correct time without any delay when read from CURRENT_TIME. Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
328 lines
8.6 KiB
C
328 lines
8.6 KiB
C
/*
|
|
* Xilinx Zynq Ultrascale+ MPSoC Real Time Clock Driver
|
|
*
|
|
* Copyright (C) 2015 Xilinx, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/rtc.h>
|
|
|
|
/* RTC Registers */
|
|
#define RTC_SET_TM_WR 0x00
|
|
#define RTC_SET_TM_RD 0x04
|
|
#define RTC_CALIB_WR 0x08
|
|
#define RTC_CALIB_RD 0x0C
|
|
#define RTC_CUR_TM 0x10
|
|
#define RTC_CUR_TICK 0x14
|
|
#define RTC_ALRM 0x18
|
|
#define RTC_INT_STS 0x20
|
|
#define RTC_INT_MASK 0x24
|
|
#define RTC_INT_EN 0x28
|
|
#define RTC_INT_DIS 0x2C
|
|
#define RTC_CTRL 0x40
|
|
|
|
#define RTC_FR_EN BIT(20)
|
|
#define RTC_FR_DATSHIFT 16
|
|
#define RTC_TICK_MASK 0xFFFF
|
|
#define RTC_INT_SEC BIT(0)
|
|
#define RTC_INT_ALRM BIT(1)
|
|
#define RTC_OSC_EN BIT(24)
|
|
#define RTC_BATT_EN BIT(31)
|
|
|
|
#define RTC_CALIB_DEF 0x198233
|
|
#define RTC_CALIB_MASK 0x1FFFFF
|
|
#define RTC_SEC_MAX_VAL 0xFFFFFFFF
|
|
|
|
struct xlnx_rtc_dev {
|
|
struct rtc_device *rtc;
|
|
void __iomem *reg_base;
|
|
int alarm_irq;
|
|
int sec_irq;
|
|
int calibval;
|
|
};
|
|
|
|
static int xlnx_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
|
|
unsigned long new_time;
|
|
|
|
/*
|
|
* The value written will be updated after 1 sec into the
|
|
* seconds read register, so we need to program time +1 sec
|
|
* to get the correct time on read.
|
|
*/
|
|
new_time = rtc_tm_to_time64(tm) + 1;
|
|
|
|
if (new_time > RTC_SEC_MAX_VAL)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Writing into calibration register will clear the Tick Counter and
|
|
* force the next second to be signaled exactly in 1 second period
|
|
*/
|
|
xrtcdev->calibval &= RTC_CALIB_MASK;
|
|
writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
|
|
|
|
writel(new_time, xrtcdev->reg_base + RTC_SET_TM_WR);
|
|
|
|
/*
|
|
* Clear the rtc interrupt status register after setting the
|
|
* time. During a read_time function, the code should read the
|
|
* RTC_INT_STATUS register and if bit 0 is still 0, it means
|
|
* that one second has not elapsed yet since RTC was set and
|
|
* the current time should be read from SET_TIME_READ register;
|
|
* otherwise, CURRENT_TIME register is read to report the time
|
|
*/
|
|
writel(RTC_INT_SEC, xrtcdev->reg_base + RTC_INT_STS);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xlnx_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
u32 status;
|
|
unsigned long read_time;
|
|
struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
|
|
|
|
status = readl(xrtcdev->reg_base + RTC_INT_STS);
|
|
|
|
if (status & RTC_INT_SEC) {
|
|
/*
|
|
* RTC has updated the CURRENT_TIME with the time written into
|
|
* SET_TIME_WRITE register.
|
|
*/
|
|
rtc_time64_to_tm(readl(xrtcdev->reg_base + RTC_CUR_TM), tm);
|
|
} else {
|
|
/*
|
|
* Time written in SET_TIME_WRITE has not yet updated into
|
|
* the seconds read register, so read the time from the
|
|
* SET_TIME_WRITE instead of CURRENT_TIME register.
|
|
* Since we add +1 sec while writing, we need to -1 sec while
|
|
* reading.
|
|
*/
|
|
read_time = readl(xrtcdev->reg_base + RTC_SET_TM_RD) - 1;
|
|
rtc_time64_to_tm(read_time, tm);
|
|
}
|
|
|
|
return rtc_valid_tm(tm);
|
|
}
|
|
|
|
static int xlnx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
|
|
|
|
rtc_time64_to_tm(readl(xrtcdev->reg_base + RTC_ALRM), &alrm->time);
|
|
alrm->enabled = readl(xrtcdev->reg_base + RTC_INT_MASK) & RTC_INT_ALRM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xlnx_rtc_alarm_irq_enable(struct device *dev, u32 enabled)
|
|
{
|
|
struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
|
|
|
|
if (enabled)
|
|
writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_EN);
|
|
else
|
|
writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_DIS);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xlnx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
|
|
unsigned long alarm_time;
|
|
|
|
alarm_time = rtc_tm_to_time64(&alrm->time);
|
|
|
|
if (alarm_time > RTC_SEC_MAX_VAL)
|
|
return -EINVAL;
|
|
|
|
writel((u32)alarm_time, (xrtcdev->reg_base + RTC_ALRM));
|
|
|
|
xlnx_rtc_alarm_irq_enable(dev, alrm->enabled);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void xlnx_init_rtc(struct xlnx_rtc_dev *xrtcdev)
|
|
{
|
|
u32 rtc_ctrl;
|
|
|
|
/* Enable RTC switch to battery when VCC_PSAUX is not available */
|
|
rtc_ctrl = readl(xrtcdev->reg_base + RTC_CTRL);
|
|
rtc_ctrl |= RTC_BATT_EN;
|
|
writel(rtc_ctrl, xrtcdev->reg_base + RTC_CTRL);
|
|
|
|
/*
|
|
* Based on crystal freq of 33.330 KHz
|
|
* set the seconds counter and enable, set fractions counter
|
|
* to default value suggested as per design spec
|
|
* to correct RTC delay in frequency over period of time.
|
|
*/
|
|
xrtcdev->calibval &= RTC_CALIB_MASK;
|
|
writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
|
|
}
|
|
|
|
static const struct rtc_class_ops xlnx_rtc_ops = {
|
|
.set_time = xlnx_rtc_set_time,
|
|
.read_time = xlnx_rtc_read_time,
|
|
.read_alarm = xlnx_rtc_read_alarm,
|
|
.set_alarm = xlnx_rtc_set_alarm,
|
|
.alarm_irq_enable = xlnx_rtc_alarm_irq_enable,
|
|
};
|
|
|
|
static irqreturn_t xlnx_rtc_interrupt(int irq, void *id)
|
|
{
|
|
struct xlnx_rtc_dev *xrtcdev = (struct xlnx_rtc_dev *)id;
|
|
unsigned int status;
|
|
|
|
status = readl(xrtcdev->reg_base + RTC_INT_STS);
|
|
/* Check if interrupt asserted */
|
|
if (!(status & (RTC_INT_SEC | RTC_INT_ALRM)))
|
|
return IRQ_NONE;
|
|
|
|
/* Clear RTC_INT_ALRM interrupt only */
|
|
writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_STS);
|
|
|
|
if (status & RTC_INT_ALRM)
|
|
rtc_update_irq(xrtcdev->rtc, 1, RTC_IRQF | RTC_AF);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int xlnx_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct xlnx_rtc_dev *xrtcdev;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
xrtcdev = devm_kzalloc(&pdev->dev, sizeof(*xrtcdev), GFP_KERNEL);
|
|
if (!xrtcdev)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, xrtcdev);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
xrtcdev->reg_base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(xrtcdev->reg_base))
|
|
return PTR_ERR(xrtcdev->reg_base);
|
|
|
|
xrtcdev->alarm_irq = platform_get_irq_byname(pdev, "alarm");
|
|
if (xrtcdev->alarm_irq < 0) {
|
|
dev_err(&pdev->dev, "no irq resource\n");
|
|
return xrtcdev->alarm_irq;
|
|
}
|
|
ret = devm_request_irq(&pdev->dev, xrtcdev->alarm_irq,
|
|
xlnx_rtc_interrupt, 0,
|
|
dev_name(&pdev->dev), xrtcdev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "request irq failed\n");
|
|
return ret;
|
|
}
|
|
|
|
xrtcdev->sec_irq = platform_get_irq_byname(pdev, "sec");
|
|
if (xrtcdev->sec_irq < 0) {
|
|
dev_err(&pdev->dev, "no irq resource\n");
|
|
return xrtcdev->sec_irq;
|
|
}
|
|
ret = devm_request_irq(&pdev->dev, xrtcdev->sec_irq,
|
|
xlnx_rtc_interrupt, 0,
|
|
dev_name(&pdev->dev), xrtcdev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "request irq failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = of_property_read_u32(pdev->dev.of_node, "calibration",
|
|
&xrtcdev->calibval);
|
|
if (ret)
|
|
xrtcdev->calibval = RTC_CALIB_DEF;
|
|
|
|
xlnx_init_rtc(xrtcdev);
|
|
|
|
device_init_wakeup(&pdev->dev, 1);
|
|
|
|
xrtcdev->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
|
|
&xlnx_rtc_ops, THIS_MODULE);
|
|
return PTR_ERR_OR_ZERO(xrtcdev->rtc);
|
|
}
|
|
|
|
static int xlnx_rtc_remove(struct platform_device *pdev)
|
|
{
|
|
xlnx_rtc_alarm_irq_enable(&pdev->dev, 0);
|
|
device_init_wakeup(&pdev->dev, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused xlnx_rtc_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct xlnx_rtc_dev *xrtcdev = platform_get_drvdata(pdev);
|
|
|
|
if (device_may_wakeup(&pdev->dev))
|
|
enable_irq_wake(xrtcdev->alarm_irq);
|
|
else
|
|
xlnx_rtc_alarm_irq_enable(dev, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused xlnx_rtc_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct xlnx_rtc_dev *xrtcdev = platform_get_drvdata(pdev);
|
|
|
|
if (device_may_wakeup(&pdev->dev))
|
|
disable_irq_wake(xrtcdev->alarm_irq);
|
|
else
|
|
xlnx_rtc_alarm_irq_enable(dev, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(xlnx_rtc_pm_ops, xlnx_rtc_suspend, xlnx_rtc_resume);
|
|
|
|
static const struct of_device_id xlnx_rtc_of_match[] = {
|
|
{.compatible = "xlnx,zynqmp-rtc" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, xlnx_rtc_of_match);
|
|
|
|
static struct platform_driver xlnx_rtc_driver = {
|
|
.probe = xlnx_rtc_probe,
|
|
.remove = xlnx_rtc_remove,
|
|
.driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.pm = &xlnx_rtc_pm_ops,
|
|
.of_match_table = xlnx_rtc_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(xlnx_rtc_driver);
|
|
|
|
MODULE_DESCRIPTION("Xilinx Zynq MPSoC RTC driver");
|
|
MODULE_AUTHOR("Xilinx Inc.");
|
|
MODULE_LICENSE("GPL v2");
|