mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-06 04:46:39 +07:00
d19d5efd8c
- Numerous minor fixes, cleanups etc. - More EEH work from Gavin to remove its dependency on device_nodes. - Memory hotplug implemented entirely in the kernel from Nathan Fontenot. - Removal of redundant CONFIG_PPC_OF by Kevin Hao. - Rewrite of VPHN parsing logic & tests from Greg Kurz. - A fix from Nish Aravamudan to reduce memory usage by clamping nodes_possible_map. - Support for pstore on powernv from Hari Bathini. - Removal of old powerpc specific byte swap routines by David Gibson. - Fix from Vasant Hegde to prevent the flash driver telling you it was flashing your firmware when it wasn't. - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver. - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek. - Some fixes for migration from Tyrel Datwyler. - A new syscall to switch the cpu endian by Michael Ellerman. - Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn. - A fix for the OPAL sensor driver from Cédric Le Goater. - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman. - Large series from Daniel Axtens to make our PCI hooks per PHB rather than per machine. - Small patch from Sam Bobroff to explicitly abort non-suspended transactions on syscalls, plus a test to exercise it. - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu. - Small patch to enable the hard lockup detector from Anton Blanchard. - Fix from Dave Olson for missing L2 cache information on some CPUs. - Some fixes from Michael Ellerman to get Cell machines booting again. - Freescale updates from Scott: Highlights include BMan device tree nodes, an MSI erratum workaround, a couple minor performance improvements, config updates, and misc fixes/cleanup. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJVL2cxAAoJEFHr6jzI4aWAR8cP/19VTo/CzCE4ffPSx7qR464n F+WFZcbNjIMXu6+B0YLuJZEsuWtKKrCit/MCg3+mSgE4iqvxmtI+HDD0445Buszj UD4E4HMdPrXQ+KUSUDORvRjv/FFUXIa94LSv/0g2UeMsPz/HeZlhMxEu7AkXw9Nf rTxsmRTsOWME85Y/c9ss7XHuWKXT3DJV7fOoK9roSaN3dJAuWTtG3WaKS0nUu0ok 0M81D6ZczoD6ybwh2DUMPD9K6SGxLdQ4OzQwtW6vWzcQIBDfy5Pdeo0iAFhGPvXf T4LLPkv4cF4AwHsAC4rKDPHQNa+oZBoLlScrHClaebAlDiv+XYKNdMogawUObvSh h7avKmQr0Ygp1OvvZAaXLhuDJI9FJJ8lf6AOIeULgHsDR9SyKMjZWxRzPe11uarO Fyi0qj3oJaQu6LjazZraApu8mo+JBtQuD3z3o5GhLxeFtBBF60JXj6zAXJikufnl kk1/BUF10nKUhtKcDX767AMUCtMH3fp5hx8K/z9T5v+pobJB26Wup1bbdT68pNBT NjdKUppV6QTjZvCsA6U2/ECu6E9KeIaFtFSL2IRRoiI0dWBN5/5eYn3RGkO2ZFoL 1NdwKA2XJcchwTPkpSRrUG70sYH0uM2AldNYyaLfjzrQqza7Y6lF699ilxWmCN/H OplzJAE5cQ8Am078veTW =03Yh -----END PGP SIGNATURE----- Merge tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: - Numerous minor fixes, cleanups etc. - More EEH work from Gavin to remove its dependency on device_nodes. - Memory hotplug implemented entirely in the kernel from Nathan Fontenot. - Removal of redundant CONFIG_PPC_OF by Kevin Hao. - Rewrite of VPHN parsing logic & tests from Greg Kurz. - A fix from Nish Aravamudan to reduce memory usage by clamping nodes_possible_map. - Support for pstore on powernv from Hari Bathini. - Removal of old powerpc specific byte swap routines by David Gibson. - Fix from Vasant Hegde to prevent the flash driver telling you it was flashing your firmware when it wasn't. - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver. - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek. - Some fixes for migration from Tyrel Datwyler. - A new syscall to switch the cpu endian by Michael Ellerman. - Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn. - A fix for the OPAL sensor driver from Cédric Le Goater. - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman. - Large series from Daniel Axtens to make our PCI hooks per PHB rather than per machine. - Small patch from Sam Bobroff to explicitly abort non-suspended transactions on syscalls, plus a test to exercise it. - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu. - Small patch to enable the hard lockup detector from Anton Blanchard. - Fix from Dave Olson for missing L2 cache information on some CPUs. - Some fixes from Michael Ellerman to get Cell machines booting again. - Freescale updates from Scott: Highlights include BMan device tree nodes, an MSI erratum workaround, a couple minor performance improvements, config updates, and misc fixes/cleanup. * tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits) powerpc/powermac: Fix build error seen with powermac smp builds powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE powerpc: Remove PPC32 code from pseries specific find_and_init_phbs() powerpc/cell: Fix iommu breakage caused by controller_ops change powerpc/eeh: Fix crash in eeh_add_device_early() on Cell powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails powerpc/pseries: Correct memory hotplug locking powerpc: Fix missing L2 cache size in /sys/devices/system/cpu powerpc: Add ppc64 hard lockup detector support oprofile: Disable oprofile NMI timer on ppc64 powerpc/perf/hv-24x7: Add missing put_cpu_var() powerpc/perf/hv-24x7: Break up single_24x7_request powerpc/perf/hv-24x7: Define update_event_count() powerpc/perf/hv-24x7: Whitespace cleanup powerpc/perf/hv-24x7: Define add_event_to_24x7_request() powerpc/perf/hv-24x7: Rename hv_24x7_event_update powerpc/perf/hv-24x7: Move debug prints to separate function powerpc/perf/hv-24x7: Drop event_24x7_request() powerpc/perf/hv-24x7: Use pr_devel() to log message ... Conflicts: tools/testing/selftests/powerpc/Makefile tools/testing/selftests/powerpc/tm/Makefile
545 lines
15 KiB
C
545 lines
15 KiB
C
/*
|
|
* sata_svw.c - ServerWorks / Apple K2 SATA
|
|
*
|
|
* Maintained by: Benjamin Herrenschmidt <benh@kernel.crashing.org> and
|
|
* Jeff Garzik <jgarzik@pobox.com>
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
* on emails.
|
|
*
|
|
* Copyright 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
*
|
|
* Bits from Jeff Garzik, Copyright RedHat, Inc.
|
|
*
|
|
* This driver probably works with non-Apple versions of the
|
|
* Broadcom chipset...
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/DocBook/libata.*
|
|
*
|
|
* Hardware documentation available under NDA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <scsi/scsi.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/of.h>
|
|
|
|
#define DRV_NAME "sata_svw"
|
|
#define DRV_VERSION "2.3"
|
|
|
|
enum {
|
|
/* ap->flags bits */
|
|
K2_FLAG_SATA_8_PORTS = (1 << 24),
|
|
K2_FLAG_NO_ATAPI_DMA = (1 << 25),
|
|
K2_FLAG_BAR_POS_3 = (1 << 26),
|
|
|
|
/* Taskfile registers offsets */
|
|
K2_SATA_TF_CMD_OFFSET = 0x00,
|
|
K2_SATA_TF_DATA_OFFSET = 0x00,
|
|
K2_SATA_TF_ERROR_OFFSET = 0x04,
|
|
K2_SATA_TF_NSECT_OFFSET = 0x08,
|
|
K2_SATA_TF_LBAL_OFFSET = 0x0c,
|
|
K2_SATA_TF_LBAM_OFFSET = 0x10,
|
|
K2_SATA_TF_LBAH_OFFSET = 0x14,
|
|
K2_SATA_TF_DEVICE_OFFSET = 0x18,
|
|
K2_SATA_TF_CMDSTAT_OFFSET = 0x1c,
|
|
K2_SATA_TF_CTL_OFFSET = 0x20,
|
|
|
|
/* DMA base */
|
|
K2_SATA_DMA_CMD_OFFSET = 0x30,
|
|
|
|
/* SCRs base */
|
|
K2_SATA_SCR_STATUS_OFFSET = 0x40,
|
|
K2_SATA_SCR_ERROR_OFFSET = 0x44,
|
|
K2_SATA_SCR_CONTROL_OFFSET = 0x48,
|
|
|
|
/* Others */
|
|
K2_SATA_SICR1_OFFSET = 0x80,
|
|
K2_SATA_SICR2_OFFSET = 0x84,
|
|
K2_SATA_SIM_OFFSET = 0x88,
|
|
|
|
/* Port stride */
|
|
K2_SATA_PORT_OFFSET = 0x100,
|
|
|
|
chip_svw4 = 0,
|
|
chip_svw8 = 1,
|
|
chip_svw42 = 2, /* bar 3 */
|
|
chip_svw43 = 3, /* bar 5 */
|
|
};
|
|
|
|
static u8 k2_stat_check_status(struct ata_port *ap);
|
|
|
|
|
|
static int k2_sata_check_atapi_dma(struct ata_queued_cmd *qc)
|
|
{
|
|
u8 cmnd = qc->scsicmd->cmnd[0];
|
|
|
|
if (qc->ap->flags & K2_FLAG_NO_ATAPI_DMA)
|
|
return -1; /* ATAPI DMA not supported */
|
|
else {
|
|
switch (cmnd) {
|
|
case READ_10:
|
|
case READ_12:
|
|
case READ_16:
|
|
case WRITE_10:
|
|
case WRITE_12:
|
|
case WRITE_16:
|
|
return 0;
|
|
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
}
|
|
}
|
|
|
|
static int k2_sata_scr_read(struct ata_link *link,
|
|
unsigned int sc_reg, u32 *val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return -EINVAL;
|
|
*val = readl(link->ap->ioaddr.scr_addr + (sc_reg * 4));
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int k2_sata_scr_write(struct ata_link *link,
|
|
unsigned int sc_reg, u32 val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return -EINVAL;
|
|
writel(val, link->ap->ioaddr.scr_addr + (sc_reg * 4));
|
|
return 0;
|
|
}
|
|
|
|
static int k2_sata_softreset(struct ata_link *link,
|
|
unsigned int *class, unsigned long deadline)
|
|
{
|
|
u8 dmactl;
|
|
void __iomem *mmio = link->ap->ioaddr.bmdma_addr;
|
|
|
|
dmactl = readb(mmio + ATA_DMA_CMD);
|
|
|
|
/* Clear the start bit */
|
|
if (dmactl & ATA_DMA_START) {
|
|
dmactl &= ~ATA_DMA_START;
|
|
writeb(dmactl, mmio + ATA_DMA_CMD);
|
|
}
|
|
|
|
return ata_sff_softreset(link, class, deadline);
|
|
}
|
|
|
|
static int k2_sata_hardreset(struct ata_link *link,
|
|
unsigned int *class, unsigned long deadline)
|
|
{
|
|
u8 dmactl;
|
|
void __iomem *mmio = link->ap->ioaddr.bmdma_addr;
|
|
|
|
dmactl = readb(mmio + ATA_DMA_CMD);
|
|
|
|
/* Clear the start bit */
|
|
if (dmactl & ATA_DMA_START) {
|
|
dmactl &= ~ATA_DMA_START;
|
|
writeb(dmactl, mmio + ATA_DMA_CMD);
|
|
}
|
|
|
|
return sata_sff_hardreset(link, class, deadline);
|
|
}
|
|
|
|
static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
|
|
|
|
if (tf->ctl != ap->last_ctl) {
|
|
writeb(tf->ctl, ioaddr->ctl_addr);
|
|
ap->last_ctl = tf->ctl;
|
|
ata_wait_idle(ap);
|
|
}
|
|
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
|
|
writew(tf->feature | (((u16)tf->hob_feature) << 8),
|
|
ioaddr->feature_addr);
|
|
writew(tf->nsect | (((u16)tf->hob_nsect) << 8),
|
|
ioaddr->nsect_addr);
|
|
writew(tf->lbal | (((u16)tf->hob_lbal) << 8),
|
|
ioaddr->lbal_addr);
|
|
writew(tf->lbam | (((u16)tf->hob_lbam) << 8),
|
|
ioaddr->lbam_addr);
|
|
writew(tf->lbah | (((u16)tf->hob_lbah) << 8),
|
|
ioaddr->lbah_addr);
|
|
} else if (is_addr) {
|
|
writew(tf->feature, ioaddr->feature_addr);
|
|
writew(tf->nsect, ioaddr->nsect_addr);
|
|
writew(tf->lbal, ioaddr->lbal_addr);
|
|
writew(tf->lbam, ioaddr->lbam_addr);
|
|
writew(tf->lbah, ioaddr->lbah_addr);
|
|
}
|
|
|
|
if (tf->flags & ATA_TFLAG_DEVICE)
|
|
writeb(tf->device, ioaddr->device_addr);
|
|
|
|
ata_wait_idle(ap);
|
|
}
|
|
|
|
|
|
static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
u16 nsect, lbal, lbam, lbah, feature;
|
|
|
|
tf->command = k2_stat_check_status(ap);
|
|
tf->device = readw(ioaddr->device_addr);
|
|
feature = readw(ioaddr->error_addr);
|
|
nsect = readw(ioaddr->nsect_addr);
|
|
lbal = readw(ioaddr->lbal_addr);
|
|
lbam = readw(ioaddr->lbam_addr);
|
|
lbah = readw(ioaddr->lbah_addr);
|
|
|
|
tf->feature = feature;
|
|
tf->nsect = nsect;
|
|
tf->lbal = lbal;
|
|
tf->lbam = lbam;
|
|
tf->lbah = lbah;
|
|
|
|
if (tf->flags & ATA_TFLAG_LBA48) {
|
|
tf->hob_feature = feature >> 8;
|
|
tf->hob_nsect = nsect >> 8;
|
|
tf->hob_lbal = lbal >> 8;
|
|
tf->hob_lbam = lbam >> 8;
|
|
tf->hob_lbah = lbah >> 8;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* k2_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction (MMIO)
|
|
* @qc: Info associated with this ATA transaction.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
|
|
static void k2_bmdma_setup_mmio(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
|
|
u8 dmactl;
|
|
void __iomem *mmio = ap->ioaddr.bmdma_addr;
|
|
|
|
/* load PRD table addr. */
|
|
mb(); /* make sure PRD table writes are visible to controller */
|
|
writel(ap->bmdma_prd_dma, mmio + ATA_DMA_TABLE_OFS);
|
|
|
|
/* specify data direction, triple-check start bit is clear */
|
|
dmactl = readb(mmio + ATA_DMA_CMD);
|
|
dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
|
|
if (!rw)
|
|
dmactl |= ATA_DMA_WR;
|
|
writeb(dmactl, mmio + ATA_DMA_CMD);
|
|
|
|
/* issue r/w command if this is not a ATA DMA command*/
|
|
if (qc->tf.protocol != ATA_PROT_DMA)
|
|
ap->ops->sff_exec_command(ap, &qc->tf);
|
|
}
|
|
|
|
/**
|
|
* k2_bmdma_start_mmio - Start a PCI IDE BMDMA transaction (MMIO)
|
|
* @qc: Info associated with this ATA transaction.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
|
|
static void k2_bmdma_start_mmio(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
void __iomem *mmio = ap->ioaddr.bmdma_addr;
|
|
u8 dmactl;
|
|
|
|
/* start host DMA transaction */
|
|
dmactl = readb(mmio + ATA_DMA_CMD);
|
|
writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD);
|
|
/* This works around possible data corruption.
|
|
|
|
On certain SATA controllers that can be seen when the r/w
|
|
command is given to the controller before the host DMA is
|
|
started.
|
|
|
|
On a Read command, the controller would initiate the
|
|
command to the drive even before it sees the DMA
|
|
start. When there are very fast drives connected to the
|
|
controller, or when the data request hits in the drive
|
|
cache, there is the possibility that the drive returns a
|
|
part or all of the requested data to the controller before
|
|
the DMA start is issued. In this case, the controller
|
|
would become confused as to what to do with the data. In
|
|
the worst case when all the data is returned back to the
|
|
controller, the controller could hang. In other cases it
|
|
could return partial data returning in data
|
|
corruption. This problem has been seen in PPC systems and
|
|
can also appear on an system with very fast disks, where
|
|
the SATA controller is sitting behind a number of bridges,
|
|
and hence there is significant latency between the r/w
|
|
command and the start command. */
|
|
/* issue r/w command if the access is to ATA */
|
|
if (qc->tf.protocol == ATA_PROT_DMA)
|
|
ap->ops->sff_exec_command(ap, &qc->tf);
|
|
}
|
|
|
|
|
|
static u8 k2_stat_check_status(struct ata_port *ap)
|
|
{
|
|
return readl(ap->ioaddr.status_addr);
|
|
}
|
|
|
|
static int k2_sata_show_info(struct seq_file *m, struct Scsi_Host *shost)
|
|
{
|
|
struct ata_port *ap;
|
|
struct device_node *np;
|
|
int index;
|
|
|
|
/* Find the ata_port */
|
|
ap = ata_shost_to_port(shost);
|
|
if (ap == NULL)
|
|
return 0;
|
|
|
|
/* Find the OF node for the PCI device proper */
|
|
np = pci_device_to_OF_node(to_pci_dev(ap->host->dev));
|
|
if (np == NULL)
|
|
return 0;
|
|
|
|
/* Match it to a port node */
|
|
index = (ap == ap->host->ports[0]) ? 0 : 1;
|
|
for (np = np->child; np != NULL; np = np->sibling) {
|
|
const u32 *reg = of_get_property(np, "reg", NULL);
|
|
if (!reg)
|
|
continue;
|
|
if (index == *reg) {
|
|
seq_printf(m, "devspec: %s\n", np->full_name);
|
|
break;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct scsi_host_template k2_sata_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
.show_info = k2_sata_show_info,
|
|
};
|
|
|
|
|
|
static struct ata_port_operations k2_sata_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
.softreset = k2_sata_softreset,
|
|
.hardreset = k2_sata_hardreset,
|
|
.sff_tf_load = k2_sata_tf_load,
|
|
.sff_tf_read = k2_sata_tf_read,
|
|
.sff_check_status = k2_stat_check_status,
|
|
.check_atapi_dma = k2_sata_check_atapi_dma,
|
|
.bmdma_setup = k2_bmdma_setup_mmio,
|
|
.bmdma_start = k2_bmdma_start_mmio,
|
|
.scr_read = k2_sata_scr_read,
|
|
.scr_write = k2_sata_scr_write,
|
|
};
|
|
|
|
static const struct ata_port_info k2_port_info[] = {
|
|
/* chip_svw4 */
|
|
{
|
|
.flags = ATA_FLAG_SATA | K2_FLAG_NO_ATAPI_DMA,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &k2_sata_ops,
|
|
},
|
|
/* chip_svw8 */
|
|
{
|
|
.flags = ATA_FLAG_SATA | K2_FLAG_NO_ATAPI_DMA |
|
|
K2_FLAG_SATA_8_PORTS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &k2_sata_ops,
|
|
},
|
|
/* chip_svw42 */
|
|
{
|
|
.flags = ATA_FLAG_SATA | K2_FLAG_BAR_POS_3,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &k2_sata_ops,
|
|
},
|
|
/* chip_svw43 */
|
|
{
|
|
.flags = ATA_FLAG_SATA,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &k2_sata_ops,
|
|
},
|
|
};
|
|
|
|
static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base)
|
|
{
|
|
port->cmd_addr = base + K2_SATA_TF_CMD_OFFSET;
|
|
port->data_addr = base + K2_SATA_TF_DATA_OFFSET;
|
|
port->feature_addr =
|
|
port->error_addr = base + K2_SATA_TF_ERROR_OFFSET;
|
|
port->nsect_addr = base + K2_SATA_TF_NSECT_OFFSET;
|
|
port->lbal_addr = base + K2_SATA_TF_LBAL_OFFSET;
|
|
port->lbam_addr = base + K2_SATA_TF_LBAM_OFFSET;
|
|
port->lbah_addr = base + K2_SATA_TF_LBAH_OFFSET;
|
|
port->device_addr = base + K2_SATA_TF_DEVICE_OFFSET;
|
|
port->command_addr =
|
|
port->status_addr = base + K2_SATA_TF_CMDSTAT_OFFSET;
|
|
port->altstatus_addr =
|
|
port->ctl_addr = base + K2_SATA_TF_CTL_OFFSET;
|
|
port->bmdma_addr = base + K2_SATA_DMA_CMD_OFFSET;
|
|
port->scr_addr = base + K2_SATA_SCR_STATUS_OFFSET;
|
|
}
|
|
|
|
|
|
static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
const struct ata_port_info *ppi[] =
|
|
{ &k2_port_info[ent->driver_data], NULL };
|
|
struct ata_host *host;
|
|
void __iomem *mmio_base;
|
|
int n_ports, i, rc, bar_pos;
|
|
|
|
ata_print_version_once(&pdev->dev, DRV_VERSION);
|
|
|
|
/* allocate host */
|
|
n_ports = 4;
|
|
if (ppi[0]->flags & K2_FLAG_SATA_8_PORTS)
|
|
n_ports = 8;
|
|
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
|
|
if (!host)
|
|
return -ENOMEM;
|
|
|
|
bar_pos = 5;
|
|
if (ppi[0]->flags & K2_FLAG_BAR_POS_3)
|
|
bar_pos = 3;
|
|
/*
|
|
* If this driver happens to only be useful on Apple's K2, then
|
|
* we should check that here as it has a normal Serverworks ID
|
|
*/
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/*
|
|
* Check if we have resources mapped at all (second function may
|
|
* have been disabled by firmware)
|
|
*/
|
|
if (pci_resource_len(pdev, bar_pos) == 0) {
|
|
/* In IDE mode we need to pin the device to ensure that
|
|
pcim_release does not clear the busmaster bit in config
|
|
space, clearing causes busmaster DMA to fail on
|
|
ports 3 & 4 */
|
|
pcim_pin_device(pdev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Request and iomap PCI regions */
|
|
rc = pcim_iomap_regions(pdev, 1 << bar_pos, DRV_NAME);
|
|
if (rc == -EBUSY)
|
|
pcim_pin_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
host->iomap = pcim_iomap_table(pdev);
|
|
mmio_base = host->iomap[bar_pos];
|
|
|
|
/* different controllers have different number of ports - currently 4 or 8 */
|
|
/* All ports are on the same function. Multi-function device is no
|
|
* longer available. This should not be seen in any system. */
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
unsigned int offset = i * K2_SATA_PORT_OFFSET;
|
|
|
|
k2_sata_setup_port(&ap->ioaddr, mmio_base + offset);
|
|
|
|
ata_port_pbar_desc(ap, 5, -1, "mmio");
|
|
ata_port_pbar_desc(ap, 5, offset, "port");
|
|
}
|
|
|
|
rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Clear a magic bit in SCR1 according to Darwin, those help
|
|
* some funky seagate drives (though so far, those were already
|
|
* set by the firmware on the machines I had access to)
|
|
*/
|
|
writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000,
|
|
mmio_base + K2_SATA_SICR1_OFFSET);
|
|
|
|
/* Clear SATA error & interrupts we don't use */
|
|
writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET);
|
|
writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
|
|
|
|
pci_set_master(pdev);
|
|
return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
|
|
IRQF_SHARED, &k2_sata_sht);
|
|
}
|
|
|
|
/* 0x240 is device ID for Apple K2 device
|
|
* 0x241 is device ID for Serverworks Frodo4
|
|
* 0x242 is device ID for Serverworks Frodo8
|
|
* 0x24a is device ID for BCM5785 (aka HT1000) HT southbridge integrated SATA
|
|
* controller
|
|
* */
|
|
static const struct pci_device_id k2_sata_pci_tbl[] = {
|
|
{ PCI_VDEVICE(SERVERWORKS, 0x0240), chip_svw4 },
|
|
{ PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw8 },
|
|
{ PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw4 },
|
|
{ PCI_VDEVICE(SERVERWORKS, 0x024a), chip_svw4 },
|
|
{ PCI_VDEVICE(SERVERWORKS, 0x024b), chip_svw4 },
|
|
{ PCI_VDEVICE(SERVERWORKS, 0x0410), chip_svw42 },
|
|
{ PCI_VDEVICE(SERVERWORKS, 0x0411), chip_svw43 },
|
|
|
|
{ }
|
|
};
|
|
|
|
static struct pci_driver k2_sata_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = k2_sata_pci_tbl,
|
|
.probe = k2_sata_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
module_pci_driver(k2_sata_pci_driver);
|
|
|
|
MODULE_AUTHOR("Benjamin Herrenschmidt");
|
|
MODULE_DESCRIPTION("low-level driver for K2 SATA controller");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, k2_sata_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|