Stephen Boyd 490b63e6de usb: chipidea: Configure phy for appropriate mode ... When the qcom chipidea controller is used with an extcon, we need to signal device mode or host mode to the phy so it can configure itself for the correct mode. This should be done after the phy is powered up, so that the register writes work correctly. Add in the appropriate phy_set_mode() call here. Cc: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>		2017-02-03 16:48:33 +08:00
..
bits.h	usb: chipidea: add tx/rx burst size configuration interface	2015-08-14 10:03:58 +08:00
ci_hdrc_imx.c	usb: chipidea: imx: configure imx for ULPI phy	2016-11-14 10:03:40 +08:00
ci_hdrc_imx.h	usb: chipidea: imx: configure imx for ULPI phy	2016-11-14 10:03:40 +08:00
ci_hdrc_msm.c	usb: chipidea: msm: Be silent on probe defer errors	2017-01-20 15:27:38 +08:00
ci_hdrc_pci.c	usb: chipidea: fix return value check in ci_hdrc_pci_probe()	2016-02-19 14:13:44 +08:00
ci_hdrc_usb2.c	usb: chipidea: usb2: delete the redundant setting default DMA mask code	2017-01-23 17:02:39 +08:00
ci_hdrc_zevio.c	Chipidea: TI-NSPIRE USB OTG hardware does not support high speed and must connect at full speed	2015-03-18 16:19:11 +01:00
ci.h	usb: chipidea: Add support for ULPI PHY bus	2017-01-20 11:25:14 +08:00
core.c	usb: chipidea: Configure phy for appropriate mode	2017-02-03 16:48:33 +08:00
debug.c	chipidea: error on overflow for port_test_write	2016-02-20 20:15:57 -08:00
host.c	usb: chipidea: msm: Handle phy power states	2017-01-20 15:27:35 +08:00
host.h	usb: chipidea: ehci_init_driver is intended to call one time	2015-07-22 08:03:41 +08:00
Kconfig	usb: chipidea: msm: Add reset controller for PHY POR bit	2017-01-20 15:26:47 +08:00
Makefile	usb: chipidea: Add support for ULPI PHY bus	2017-01-20 11:25:14 +08:00
otg_fsm.c	ktime: Get rid of the union	2016-12-25 17:21:22 +01:00
otg_fsm.h	usb: chipidea: otg: add A idle to B disconnect timer	2016-03-04 15:14:38 +02:00
otg.c	usb: chipidea: vbus event may exist before starting gadget	2017-01-20 15:24:59 +08:00
otg.h	usb: chipidea: using one inline function to cover queue work operations	2014-05-23 11:35:02 +09:00
udc.c	usb: chipidea: Drop lock across event_notify during gadget stop	2017-01-20 15:27:43 +08:00
udc.h	usb: chipidea: Properly mark little endian descriptors	2016-11-14 10:03:40 +08:00
ulpi.c	usb: chipidea: Add support for ULPI PHY bus	2017-01-20 11:25:14 +08:00
usbmisc_imx.c	usb: chipidea: imx: Disable internal 60Mhz clock with ULPI PHY	2016-11-14 10:03:40 +08:00