linux_dsm_epyc7002/drivers/usb/gadget/s3c2410_udc.c
Michal Nazarewicz 7177aed44f usb: gadget: rename usb_gadget_driver::speed to max_speed
This commit renames the “speed” field of the usb_gadget_driver
structure to “max_speed”.  This is so that to make it more
apparent that the field represents the maximum speed gadget
driver can support.

This also make the field look more like fields with the same
name in usb_gadget and usb_composite_driver structures.  All
of those represent the *maximal* speed given entity supports.

After this commit, there are the following fields in various
structures:
* usb_gadget::speed - the current connection speed,
* usb_gadget::max_speed - maximal speed UDC supports,
* usb_gadget_driver::max_speed - maximal speed gadget driver
  supports, and
* usb_composite_driver::max_speed - maximal speed composite
  gadget supports.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:12 +02:00

2106 lines
49 KiB
C

/*
* linux/drivers/usb/gadget/s3c2410_udc.c
*
* Samsung S3C24xx series on-chip full speed USB device controllers
*
* Copyright (C) 2004-2007 Herbert Pötzl - Arnaud Patard
* Additional cleanups by Ben Dooks <ben-linux@fluff.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/prefetch.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/usb.h>
#include <linux/usb/gadget.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/unaligned.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
#include <plat/regs-udc.h>
#include <plat/udc.h>
#include "s3c2410_udc.h"
#define DRIVER_DESC "S3C2410 USB Device Controller Gadget"
#define DRIVER_VERSION "29 Apr 2007"
#define DRIVER_AUTHOR "Herbert Pötzl <herbert@13thfloor.at>, " \
"Arnaud Patard <arnaud.patard@rtp-net.org>"
static const char gadget_name[] = "s3c2410_udc";
static const char driver_desc[] = DRIVER_DESC;
static struct s3c2410_udc *the_controller;
static struct clk *udc_clock;
static struct clk *usb_bus_clock;
static void __iomem *base_addr;
static u64 rsrc_start;
static u64 rsrc_len;
static struct dentry *s3c2410_udc_debugfs_root;
static inline u32 udc_read(u32 reg)
{
return readb(base_addr + reg);
}
static inline void udc_write(u32 value, u32 reg)
{
writeb(value, base_addr + reg);
}
static inline void udc_writeb(void __iomem *base, u32 value, u32 reg)
{
writeb(value, base + reg);
}
static struct s3c2410_udc_mach_info *udc_info;
/*************************** DEBUG FUNCTION ***************************/
#define DEBUG_NORMAL 1
#define DEBUG_VERBOSE 2
#ifdef CONFIG_USB_S3C2410_DEBUG
#define USB_S3C2410_DEBUG_LEVEL 0
static uint32_t s3c2410_ticks = 0;
static int dprintk(int level, const char *fmt, ...)
{
static char printk_buf[1024];
static long prevticks;
static int invocation;
va_list args;
int len;
if (level > USB_S3C2410_DEBUG_LEVEL)
return 0;
if (s3c2410_ticks != prevticks) {
prevticks = s3c2410_ticks;
invocation = 0;
}
len = scnprintf(printk_buf,
sizeof(printk_buf), "%1lu.%02d USB: ",
prevticks, invocation++);
va_start(args, fmt);
len = vscnprintf(printk_buf+len,
sizeof(printk_buf)-len, fmt, args);
va_end(args);
return printk(KERN_DEBUG "%s", printk_buf);
}
#else
static int dprintk(int level, const char *fmt, ...)
{
return 0;
}
#endif
static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p)
{
u32 addr_reg,pwr_reg,ep_int_reg,usb_int_reg;
u32 ep_int_en_reg, usb_int_en_reg, ep0_csr;
u32 ep1_i_csr1,ep1_i_csr2,ep1_o_csr1,ep1_o_csr2;
u32 ep2_i_csr1,ep2_i_csr2,ep2_o_csr1,ep2_o_csr2;
addr_reg = udc_read(S3C2410_UDC_FUNC_ADDR_REG);
pwr_reg = udc_read(S3C2410_UDC_PWR_REG);
ep_int_reg = udc_read(S3C2410_UDC_EP_INT_REG);
usb_int_reg = udc_read(S3C2410_UDC_USB_INT_REG);
ep_int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG);
usb_int_en_reg = udc_read(S3C2410_UDC_USB_INT_EN_REG);
udc_write(0, S3C2410_UDC_INDEX_REG);
ep0_csr = udc_read(S3C2410_UDC_IN_CSR1_REG);
udc_write(1, S3C2410_UDC_INDEX_REG);
ep1_i_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG);
ep1_i_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG);
ep1_o_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG);
ep1_o_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG);
udc_write(2, S3C2410_UDC_INDEX_REG);
ep2_i_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG);
ep2_i_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG);
ep2_o_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG);
ep2_o_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG);
seq_printf(m, "FUNC_ADDR_REG : 0x%04X\n"
"PWR_REG : 0x%04X\n"
"EP_INT_REG : 0x%04X\n"
"USB_INT_REG : 0x%04X\n"
"EP_INT_EN_REG : 0x%04X\n"
"USB_INT_EN_REG : 0x%04X\n"
"EP0_CSR : 0x%04X\n"
"EP1_I_CSR1 : 0x%04X\n"
"EP1_I_CSR2 : 0x%04X\n"
"EP1_O_CSR1 : 0x%04X\n"
"EP1_O_CSR2 : 0x%04X\n"
"EP2_I_CSR1 : 0x%04X\n"
"EP2_I_CSR2 : 0x%04X\n"
"EP2_O_CSR1 : 0x%04X\n"
"EP2_O_CSR2 : 0x%04X\n",
addr_reg,pwr_reg,ep_int_reg,usb_int_reg,
ep_int_en_reg, usb_int_en_reg, ep0_csr,
ep1_i_csr1,ep1_i_csr2,ep1_o_csr1,ep1_o_csr2,
ep2_i_csr1,ep2_i_csr2,ep2_o_csr1,ep2_o_csr2
);
return 0;
}
static int s3c2410_udc_debugfs_fops_open(struct inode *inode,
struct file *file)
{
return single_open(file, s3c2410_udc_debugfs_seq_show, NULL);
}
static const struct file_operations s3c2410_udc_debugfs_fops = {
.open = s3c2410_udc_debugfs_fops_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
.owner = THIS_MODULE,
};
/* io macros */
static inline void s3c2410_udc_clear_ep0_opr(void __iomem *base)
{
udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
udc_writeb(base, S3C2410_UDC_EP0_CSR_SOPKTRDY,
S3C2410_UDC_EP0_CSR_REG);
}
static inline void s3c2410_udc_clear_ep0_sst(void __iomem *base)
{
udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
writeb(0x00, base + S3C2410_UDC_EP0_CSR_REG);
}
static inline void s3c2410_udc_clear_ep0_se(void __iomem *base)
{
udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
udc_writeb(base, S3C2410_UDC_EP0_CSR_SSE, S3C2410_UDC_EP0_CSR_REG);
}
static inline void s3c2410_udc_set_ep0_ipr(void __iomem *base)
{
udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
udc_writeb(base, S3C2410_UDC_EP0_CSR_IPKRDY, S3C2410_UDC_EP0_CSR_REG);
}
static inline void s3c2410_udc_set_ep0_de(void __iomem *base)
{
udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
udc_writeb(base, S3C2410_UDC_EP0_CSR_DE, S3C2410_UDC_EP0_CSR_REG);
}
inline void s3c2410_udc_set_ep0_ss(void __iomem *b)
{
udc_writeb(b, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
udc_writeb(b, S3C2410_UDC_EP0_CSR_SENDSTL, S3C2410_UDC_EP0_CSR_REG);
}
static inline void s3c2410_udc_set_ep0_de_out(void __iomem *base)
{
udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
udc_writeb(base,(S3C2410_UDC_EP0_CSR_SOPKTRDY
| S3C2410_UDC_EP0_CSR_DE),
S3C2410_UDC_EP0_CSR_REG);
}
static inline void s3c2410_udc_set_ep0_sse_out(void __iomem *base)
{
udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
udc_writeb(base, (S3C2410_UDC_EP0_CSR_SOPKTRDY
| S3C2410_UDC_EP0_CSR_SSE),
S3C2410_UDC_EP0_CSR_REG);
}
static inline void s3c2410_udc_set_ep0_de_in(void __iomem *base)
{
udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
udc_writeb(base, (S3C2410_UDC_EP0_CSR_IPKRDY
| S3C2410_UDC_EP0_CSR_DE),
S3C2410_UDC_EP0_CSR_REG);
}
/*------------------------- I/O ----------------------------------*/
/*
* s3c2410_udc_done
*/
static void s3c2410_udc_done(struct s3c2410_ep *ep,
struct s3c2410_request *req, int status)
{
unsigned halted = ep->halted;
list_del_init(&req->queue);
if (likely (req->req.status == -EINPROGRESS))
req->req.status = status;
else
status = req->req.status;
ep->halted = 1;
req->req.complete(&ep->ep, &req->req);
ep->halted = halted;
}
static void s3c2410_udc_nuke(struct s3c2410_udc *udc,
struct s3c2410_ep *ep, int status)
{
/* Sanity check */
if (&ep->queue == NULL)
return;
while (!list_empty (&ep->queue)) {
struct s3c2410_request *req;
req = list_entry (ep->queue.next, struct s3c2410_request,
queue);
s3c2410_udc_done(ep, req, status);
}
}
static inline void s3c2410_udc_clear_ep_state(struct s3c2410_udc *dev)
{
unsigned i;
/* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint
* fifos, and pending transactions mustn't be continued in any case.
*/
for (i = 1; i < S3C2410_ENDPOINTS; i++)
s3c2410_udc_nuke(dev, &dev->ep[i], -ECONNABORTED);
}
static inline int s3c2410_udc_fifo_count_out(void)
{
int tmp;
tmp = udc_read(S3C2410_UDC_OUT_FIFO_CNT2_REG) << 8;
tmp |= udc_read(S3C2410_UDC_OUT_FIFO_CNT1_REG);
return tmp;
}
/*
* s3c2410_udc_write_packet
*/
static inline int s3c2410_udc_write_packet(int fifo,
struct s3c2410_request *req,
unsigned max)
{
unsigned len = min(req->req.length - req->req.actual, max);
u8 *buf = req->req.buf + req->req.actual;
prefetch(buf);
dprintk(DEBUG_VERBOSE, "%s %d %d %d %d\n", __func__,
req->req.actual, req->req.length, len, req->req.actual + len);
req->req.actual += len;
udelay(5);
writesb(base_addr + fifo, buf, len);
return len;
}
/*
* s3c2410_udc_write_fifo
*
* return: 0 = still running, 1 = completed, negative = errno
*/
static int s3c2410_udc_write_fifo(struct s3c2410_ep *ep,
struct s3c2410_request *req)
{
unsigned count;
int is_last;
u32 idx;
int fifo_reg;
u32 ep_csr;
idx = ep->bEndpointAddress & 0x7F;
switch (idx) {
default:
idx = 0;
case 0:
fifo_reg = S3C2410_UDC_EP0_FIFO_REG;
break;
case 1:
fifo_reg = S3C2410_UDC_EP1_FIFO_REG;
break;
case 2:
fifo_reg = S3C2410_UDC_EP2_FIFO_REG;
break;
case 3:
fifo_reg = S3C2410_UDC_EP3_FIFO_REG;
break;
case 4:
fifo_reg = S3C2410_UDC_EP4_FIFO_REG;
break;
}
count = s3c2410_udc_write_packet(fifo_reg, req, ep->ep.maxpacket);
/* last packet is often short (sometimes a zlp) */
if (count != ep->ep.maxpacket)
is_last = 1;
else if (req->req.length != req->req.actual || req->req.zero)
is_last = 0;
else
is_last = 2;
/* Only ep0 debug messages are interesting */
if (idx == 0)
dprintk(DEBUG_NORMAL,
"Written ep%d %d.%d of %d b [last %d,z %d]\n",
idx, count, req->req.actual, req->req.length,
is_last, req->req.zero);
if (is_last) {
/* The order is important. It prevents sending 2 packets
* at the same time */
if (idx == 0) {
/* Reset signal => no need to say 'data sent' */
if (! (udc_read(S3C2410_UDC_USB_INT_REG)
& S3C2410_UDC_USBINT_RESET))
s3c2410_udc_set_ep0_de_in(base_addr);
ep->dev->ep0state=EP0_IDLE;
} else {
udc_write(idx, S3C2410_UDC_INDEX_REG);
ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG);
udc_write(idx, S3C2410_UDC_INDEX_REG);
udc_write(ep_csr | S3C2410_UDC_ICSR1_PKTRDY,
S3C2410_UDC_IN_CSR1_REG);
}
s3c2410_udc_done(ep, req, 0);
is_last = 1;
} else {
if (idx == 0) {
/* Reset signal => no need to say 'data sent' */
if (! (udc_read(S3C2410_UDC_USB_INT_REG)
& S3C2410_UDC_USBINT_RESET))
s3c2410_udc_set_ep0_ipr(base_addr);
} else {
udc_write(idx, S3C2410_UDC_INDEX_REG);
ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG);
udc_write(idx, S3C2410_UDC_INDEX_REG);
udc_write(ep_csr | S3C2410_UDC_ICSR1_PKTRDY,
S3C2410_UDC_IN_CSR1_REG);
}
}
return is_last;
}
static inline int s3c2410_udc_read_packet(int fifo, u8 *buf,
struct s3c2410_request *req, unsigned avail)
{
unsigned len;
len = min(req->req.length - req->req.actual, avail);
req->req.actual += len;
readsb(fifo + base_addr, buf, len);
return len;
}
/*
* return: 0 = still running, 1 = queue empty, negative = errno
*/
static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep,
struct s3c2410_request *req)
{
u8 *buf;
u32 ep_csr;
unsigned bufferspace;
int is_last=1;
unsigned avail;
int fifo_count = 0;
u32 idx;
int fifo_reg;
idx = ep->bEndpointAddress & 0x7F;
switch (idx) {
default:
idx = 0;
case 0:
fifo_reg = S3C2410_UDC_EP0_FIFO_REG;
break;
case 1:
fifo_reg = S3C2410_UDC_EP1_FIFO_REG;
break;
case 2:
fifo_reg = S3C2410_UDC_EP2_FIFO_REG;
break;
case 3:
fifo_reg = S3C2410_UDC_EP3_FIFO_REG;
break;
case 4:
fifo_reg = S3C2410_UDC_EP4_FIFO_REG;
break;
}
if (!req->req.length)
return 1;
buf = req->req.buf + req->req.actual;
bufferspace = req->req.length - req->req.actual;
if (!bufferspace) {
dprintk(DEBUG_NORMAL, "%s: buffer full!\n", __func__);
return -1;
}
udc_write(idx, S3C2410_UDC_INDEX_REG);
fifo_count = s3c2410_udc_fifo_count_out();
dprintk(DEBUG_NORMAL, "%s fifo count : %d\n", __func__, fifo_count);
if (fifo_count > ep->ep.maxpacket)
avail = ep->ep.maxpacket;
else
avail = fifo_count;
fifo_count = s3c2410_udc_read_packet(fifo_reg, buf, req, avail);
/* checking this with ep0 is not accurate as we already
* read a control request
**/
if (idx != 0 && fifo_count < ep->ep.maxpacket) {
is_last = 1;
/* overflowed this request? flush extra data */
if (fifo_count != avail)
req->req.status = -EOVERFLOW;
} else {
is_last = (req->req.length <= req->req.actual) ? 1 : 0;
}
udc_write(idx, S3C2410_UDC_INDEX_REG);
fifo_count = s3c2410_udc_fifo_count_out();
/* Only ep0 debug messages are interesting */
if (idx == 0)
dprintk(DEBUG_VERBOSE, "%s fifo count : %d [last %d]\n",
__func__, fifo_count,is_last);
if (is_last) {
if (idx == 0) {
s3c2410_udc_set_ep0_de_out(base_addr);
ep->dev->ep0state = EP0_IDLE;
} else {
udc_write(idx, S3C2410_UDC_INDEX_REG);
ep_csr = udc_read(S3C2410_UDC_OUT_CSR1_REG);
udc_write(idx, S3C2410_UDC_INDEX_REG);
udc_write(ep_csr & ~S3C2410_UDC_OCSR1_PKTRDY,
S3C2410_UDC_OUT_CSR1_REG);
}
s3c2410_udc_done(ep, req, 0);
} else {
if (idx == 0) {
s3c2410_udc_clear_ep0_opr(base_addr);
} else {
udc_write(idx, S3C2410_UDC_INDEX_REG);
ep_csr = udc_read(S3C2410_UDC_OUT_CSR1_REG);
udc_write(idx, S3C2410_UDC_INDEX_REG);
udc_write(ep_csr & ~S3C2410_UDC_OCSR1_PKTRDY,
S3C2410_UDC_OUT_CSR1_REG);
}
}
return is_last;
}
static int s3c2410_udc_read_fifo_crq(struct usb_ctrlrequest *crq)
{
unsigned char *outbuf = (unsigned char*)crq;
int bytes_read = 0;
udc_write(0, S3C2410_UDC_INDEX_REG);
bytes_read = s3c2410_udc_fifo_count_out();
dprintk(DEBUG_NORMAL, "%s: fifo_count=%d\n", __func__, bytes_read);
if (bytes_read > sizeof(struct usb_ctrlrequest))
bytes_read = sizeof(struct usb_ctrlrequest);
readsb(S3C2410_UDC_EP0_FIFO_REG + base_addr, outbuf, bytes_read);
dprintk(DEBUG_VERBOSE, "%s: len=%d %02x:%02x {%x,%x,%x}\n", __func__,
bytes_read, crq->bRequest, crq->bRequestType,
crq->wValue, crq->wIndex, crq->wLength);
return bytes_read;
}
static int s3c2410_udc_get_status(struct s3c2410_udc *dev,
struct usb_ctrlrequest *crq)
{
u16 status = 0;
u8 ep_num = crq->wIndex & 0x7F;
u8 is_in = crq->wIndex & USB_DIR_IN;
switch (crq->bRequestType & USB_RECIP_MASK) {
case USB_RECIP_INTERFACE:
break;
case USB_RECIP_DEVICE:
status = dev->devstatus;
break;
case USB_RECIP_ENDPOINT:
if (ep_num > 4 || crq->wLength > 2)
return 1;
if (ep_num == 0) {
udc_write(0, S3C2410_UDC_INDEX_REG);
status = udc_read(S3C2410_UDC_IN_CSR1_REG);
status = status & S3C2410_UDC_EP0_CSR_SENDSTL;
} else {
udc_write(ep_num, S3C2410_UDC_INDEX_REG);
if (is_in) {
status = udc_read(S3C2410_UDC_IN_CSR1_REG);
status = status & S3C2410_UDC_ICSR1_SENDSTL;
} else {
status = udc_read(S3C2410_UDC_OUT_CSR1_REG);
status = status & S3C2410_UDC_OCSR1_SENDSTL;
}
}
status = status ? 1 : 0;
break;
default:
return 1;
}
/* Seems to be needed to get it working. ouch :( */
udelay(5);
udc_write(status & 0xFF, S3C2410_UDC_EP0_FIFO_REG);
udc_write(status >> 8, S3C2410_UDC_EP0_FIFO_REG);
s3c2410_udc_set_ep0_de_in(base_addr);
return 0;
}
/*------------------------- usb state machine -------------------------------*/
static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value);
static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev,
struct s3c2410_ep *ep,
struct usb_ctrlrequest *crq,
u32 ep0csr)
{
int len, ret, tmp;
/* start control request? */
if (!(ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY))
return;
s3c2410_udc_nuke(dev, ep, -EPROTO);
len = s3c2410_udc_read_fifo_crq(crq);
if (len != sizeof(*crq)) {
dprintk(DEBUG_NORMAL, "setup begin: fifo READ ERROR"
" wanted %d bytes got %d. Stalling out...\n",
sizeof(*crq), len);
s3c2410_udc_set_ep0_ss(base_addr);
return;
}
dprintk(DEBUG_NORMAL, "bRequest = %d bRequestType %d wLength = %d\n",
crq->bRequest, crq->bRequestType, crq->wLength);
/* cope with automagic for some standard requests. */
dev->req_std = (crq->bRequestType & USB_TYPE_MASK)
== USB_TYPE_STANDARD;
dev->req_config = 0;
dev->req_pending = 1;
switch (crq->bRequest) {
case USB_REQ_SET_CONFIGURATION:
dprintk(DEBUG_NORMAL, "USB_REQ_SET_CONFIGURATION ... \n");
if (crq->bRequestType == USB_RECIP_DEVICE) {
dev->req_config = 1;
s3c2410_udc_set_ep0_de_out(base_addr);
}
break;
case USB_REQ_SET_INTERFACE:
dprintk(DEBUG_NORMAL, "USB_REQ_SET_INTERFACE ... \n");
if (crq->bRequestType == USB_RECIP_INTERFACE) {
dev->req_config = 1;
s3c2410_udc_set_ep0_de_out(base_addr);
}
break;
case USB_REQ_SET_ADDRESS:
dprintk(DEBUG_NORMAL, "USB_REQ_SET_ADDRESS ... \n");
if (crq->bRequestType == USB_RECIP_DEVICE) {
tmp = crq->wValue & 0x7F;
dev->address = tmp;
udc_write((tmp | S3C2410_UDC_FUNCADDR_UPDATE),
S3C2410_UDC_FUNC_ADDR_REG);
s3c2410_udc_set_ep0_de_out(base_addr);
return;
}
break;
case USB_REQ_GET_STATUS:
dprintk(DEBUG_NORMAL, "USB_REQ_GET_STATUS ... \n");
s3c2410_udc_clear_ep0_opr(base_addr);
if (dev->req_std) {
if (!s3c2410_udc_get_status(dev, crq)) {
return;
}
}
break;
case USB_REQ_CLEAR_FEATURE:
s3c2410_udc_clear_ep0_opr(base_addr);
if (crq->bRequestType != USB_RECIP_ENDPOINT)
break;
if (crq->wValue != USB_ENDPOINT_HALT || crq->wLength != 0)
break;
s3c2410_udc_set_halt(&dev->ep[crq->wIndex & 0x7f].ep, 0);
s3c2410_udc_set_ep0_de_out(base_addr);
return;
case USB_REQ_SET_FEATURE:
s3c2410_udc_clear_ep0_opr(base_addr);
if (crq->bRequestType != USB_RECIP_ENDPOINT)
break;
if (crq->wValue != USB_ENDPOINT_HALT || crq->wLength != 0)
break;
s3c2410_udc_set_halt(&dev->ep[crq->wIndex & 0x7f].ep, 1);
s3c2410_udc_set_ep0_de_out(base_addr);
return;
default:
s3c2410_udc_clear_ep0_opr(base_addr);
break;
}
if (crq->bRequestType & USB_DIR_IN)
dev->ep0state = EP0_IN_DATA_PHASE;
else
dev->ep0state = EP0_OUT_DATA_PHASE;
if (!dev->driver)
return;
/* deliver the request to the gadget driver */
ret = dev->driver->setup(&dev->gadget, crq);
if (ret < 0) {
if (dev->req_config) {
dprintk(DEBUG_NORMAL, "config change %02x fail %d?\n",
crq->bRequest, ret);
return;
}
if (ret == -EOPNOTSUPP)
dprintk(DEBUG_NORMAL, "Operation not supported\n");
else
dprintk(DEBUG_NORMAL,
"dev->driver->setup failed. (%d)\n", ret);
udelay(5);
s3c2410_udc_set_ep0_ss(base_addr);
s3c2410_udc_set_ep0_de_out(base_addr);
dev->ep0state = EP0_IDLE;
/* deferred i/o == no response yet */
} else if (dev->req_pending) {
dprintk(DEBUG_VERBOSE, "dev->req_pending... what now?\n");
dev->req_pending=0;
}
dprintk(DEBUG_VERBOSE, "ep0state %s\n", ep0states[dev->ep0state]);
}
static void s3c2410_udc_handle_ep0(struct s3c2410_udc *dev)
{
u32 ep0csr;
struct s3c2410_ep *ep = &dev->ep[0];
struct s3c2410_request *req;
struct usb_ctrlrequest crq;
if (list_empty(&ep->queue))
req = NULL;
else
req = list_entry(ep->queue.next, struct s3c2410_request, queue);
/* We make the assumption that S3C2410_UDC_IN_CSR1_REG equal to
* S3C2410_UDC_EP0_CSR_REG when index is zero */
udc_write(0, S3C2410_UDC_INDEX_REG);
ep0csr = udc_read(S3C2410_UDC_IN_CSR1_REG);
dprintk(DEBUG_NORMAL, "ep0csr %x ep0state %s\n",
ep0csr, ep0states[dev->ep0state]);
/* clear stall status */
if (ep0csr & S3C2410_UDC_EP0_CSR_SENTSTL) {
s3c2410_udc_nuke(dev, ep, -EPIPE);
dprintk(DEBUG_NORMAL, "... clear SENT_STALL ...\n");
s3c2410_udc_clear_ep0_sst(base_addr);
dev->ep0state = EP0_IDLE;
return;
}
/* clear setup end */
if (ep0csr & S3C2410_UDC_EP0_CSR_SE) {
dprintk(DEBUG_NORMAL, "... serviced SETUP_END ...\n");
s3c2410_udc_nuke(dev, ep, 0);
s3c2410_udc_clear_ep0_se(base_addr);
dev->ep0state = EP0_IDLE;
}
switch (dev->ep0state) {
case EP0_IDLE:
s3c2410_udc_handle_ep0_idle(dev, ep, &crq, ep0csr);
break;
case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */
dprintk(DEBUG_NORMAL, "EP0_IN_DATA_PHASE ... what now?\n");
if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY) && req) {
s3c2410_udc_write_fifo(ep, req);
}
break;
case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */
dprintk(DEBUG_NORMAL, "EP0_OUT_DATA_PHASE ... what now?\n");
if ((ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) && req ) {
s3c2410_udc_read_fifo(ep,req);
}
break;
case EP0_END_XFER:
dprintk(DEBUG_NORMAL, "EP0_END_XFER ... what now?\n");
dev->ep0state = EP0_IDLE;
break;
case EP0_STALL:
dprintk(DEBUG_NORMAL, "EP0_STALL ... what now?\n");
dev->ep0state = EP0_IDLE;
break;
}
}
/*
* handle_ep - Manage I/O endpoints
*/
static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
{
struct s3c2410_request *req;
int is_in = ep->bEndpointAddress & USB_DIR_IN;
u32 ep_csr1;
u32 idx;
if (likely (!list_empty(&ep->queue)))
req = list_entry(ep->queue.next,
struct s3c2410_request, queue);
else
req = NULL;
idx = ep->bEndpointAddress & 0x7F;
if (is_in) {
udc_write(idx, S3C2410_UDC_INDEX_REG);
ep_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG);
dprintk(DEBUG_VERBOSE, "ep%01d write csr:%02x %d\n",
idx, ep_csr1, req ? 1 : 0);
if (ep_csr1 & S3C2410_UDC_ICSR1_SENTSTL) {
dprintk(DEBUG_VERBOSE, "st\n");
udc_write(idx, S3C2410_UDC_INDEX_REG);
udc_write(ep_csr1 & ~S3C2410_UDC_ICSR1_SENTSTL,
S3C2410_UDC_IN_CSR1_REG);
return;
}
if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && req) {
s3c2410_udc_write_fifo(ep,req);
}
} else {
udc_write(idx, S3C2410_UDC_INDEX_REG);
ep_csr1 = udc_read(S3C2410_UDC_OUT_CSR1_REG);
dprintk(DEBUG_VERBOSE, "ep%01d rd csr:%02x\n", idx, ep_csr1);
if (ep_csr1 & S3C2410_UDC_OCSR1_SENTSTL) {
udc_write(idx, S3C2410_UDC_INDEX_REG);
udc_write(ep_csr1 & ~S3C2410_UDC_OCSR1_SENTSTL,
S3C2410_UDC_OUT_CSR1_REG);
return;
}
if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) {
s3c2410_udc_read_fifo(ep,req);
}
}
}
#include <mach/regs-irq.h>
/*
* s3c2410_udc_irq - interrupt handler
*/
static irqreturn_t s3c2410_udc_irq(int dummy, void *_dev)
{
struct s3c2410_udc *dev = _dev;
int usb_status;
int usbd_status;
int pwr_reg;
int ep0csr;
int i;
u32 idx, idx2;
unsigned long flags;
spin_lock_irqsave(&dev->lock, flags);
/* Driver connected ? */
if (!dev->driver) {
/* Clear interrupts */
udc_write(udc_read(S3C2410_UDC_USB_INT_REG),
S3C2410_UDC_USB_INT_REG);
udc_write(udc_read(S3C2410_UDC_EP_INT_REG),
S3C2410_UDC_EP_INT_REG);
}
/* Save index */
idx = udc_read(S3C2410_UDC_INDEX_REG);
/* Read status registers */
usb_status = udc_read(S3C2410_UDC_USB_INT_REG);
usbd_status = udc_read(S3C2410_UDC_EP_INT_REG);
pwr_reg = udc_read(S3C2410_UDC_PWR_REG);
udc_writeb(base_addr, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
ep0csr = udc_read(S3C2410_UDC_IN_CSR1_REG);
dprintk(DEBUG_NORMAL, "usbs=%02x, usbds=%02x, pwr=%02x ep0csr=%02x\n",
usb_status, usbd_status, pwr_reg, ep0csr);
/*
* Now, handle interrupts. There's two types :
* - Reset, Resume, Suspend coming -> usb_int_reg
* - EP -> ep_int_reg
*/
/* RESET */
if (usb_status & S3C2410_UDC_USBINT_RESET) {
/* two kind of reset :
* - reset start -> pwr reg = 8
* - reset end -> pwr reg = 0
**/
dprintk(DEBUG_NORMAL, "USB reset csr %x pwr %x\n",
ep0csr, pwr_reg);
dev->gadget.speed = USB_SPEED_UNKNOWN;
udc_write(0x00, S3C2410_UDC_INDEX_REG);
udc_write((dev->ep[0].ep.maxpacket & 0x7ff) >> 3,
S3C2410_UDC_MAXP_REG);
dev->address = 0;
dev->ep0state = EP0_IDLE;
dev->gadget.speed = USB_SPEED_FULL;
/* clear interrupt */
udc_write(S3C2410_UDC_USBINT_RESET,
S3C2410_UDC_USB_INT_REG);
udc_write(idx, S3C2410_UDC_INDEX_REG);
spin_unlock_irqrestore(&dev->lock, flags);
return IRQ_HANDLED;
}
/* RESUME */
if (usb_status & S3C2410_UDC_USBINT_RESUME) {
dprintk(DEBUG_NORMAL, "USB resume\n");
/* clear interrupt */
udc_write(S3C2410_UDC_USBINT_RESUME,
S3C2410_UDC_USB_INT_REG);
if (dev->gadget.speed != USB_SPEED_UNKNOWN
&& dev->driver
&& dev->driver->resume)
dev->driver->resume(&dev->gadget);
}
/* SUSPEND */
if (usb_status & S3C2410_UDC_USBINT_SUSPEND) {
dprintk(DEBUG_NORMAL, "USB suspend\n");
/* clear interrupt */
udc_write(S3C2410_UDC_USBINT_SUSPEND,
S3C2410_UDC_USB_INT_REG);
if (dev->gadget.speed != USB_SPEED_UNKNOWN
&& dev->driver
&& dev->driver->suspend)
dev->driver->suspend(&dev->gadget);
dev->ep0state = EP0_IDLE;
}
/* EP */
/* control traffic */
/* check on ep0csr != 0 is not a good idea as clearing in_pkt_ready
* generate an interrupt
*/
if (usbd_status & S3C2410_UDC_INT_EP0) {
dprintk(DEBUG_VERBOSE, "USB ep0 irq\n");
/* Clear the interrupt bit by setting it to 1 */
udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_REG);
s3c2410_udc_handle_ep0(dev);
}
/* endpoint data transfers */
for (i = 1; i < S3C2410_ENDPOINTS; i++) {
u32 tmp = 1 << i;
if (usbd_status & tmp) {
dprintk(DEBUG_VERBOSE, "USB ep%d irq\n", i);
/* Clear the interrupt bit by setting it to 1 */
udc_write(tmp, S3C2410_UDC_EP_INT_REG);
s3c2410_udc_handle_ep(&dev->ep[i]);
}
}
/* what else causes this interrupt? a receive! who is it? */
if (!usb_status && !usbd_status && !pwr_reg && !ep0csr) {
for (i = 1; i < S3C2410_ENDPOINTS; i++) {
idx2 = udc_read(S3C2410_UDC_INDEX_REG);
udc_write(i, S3C2410_UDC_INDEX_REG);
if (udc_read(S3C2410_UDC_OUT_CSR1_REG) & 0x1)
s3c2410_udc_handle_ep(&dev->ep[i]);
/* restore index */
udc_write(idx2, S3C2410_UDC_INDEX_REG);
}
}
dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", IRQ_USBD);
/* Restore old index */
udc_write(idx, S3C2410_UDC_INDEX_REG);
spin_unlock_irqrestore(&dev->lock, flags);
return IRQ_HANDLED;
}
/*------------------------- s3c2410_ep_ops ----------------------------------*/
static inline struct s3c2410_ep *to_s3c2410_ep(struct usb_ep *ep)
{
return container_of(ep, struct s3c2410_ep, ep);
}
static inline struct s3c2410_udc *to_s3c2410_udc(struct usb_gadget *gadget)
{
return container_of(gadget, struct s3c2410_udc, gadget);
}
static inline struct s3c2410_request *to_s3c2410_req(struct usb_request *req)
{
return container_of(req, struct s3c2410_request, req);
}
/*
* s3c2410_udc_ep_enable
*/
static int s3c2410_udc_ep_enable(struct usb_ep *_ep,
const struct usb_endpoint_descriptor *desc)
{
struct s3c2410_udc *dev;
struct s3c2410_ep *ep;
u32 max, tmp;
unsigned long flags;
u32 csr1,csr2;
u32 int_en_reg;
ep = to_s3c2410_ep(_ep);
if (!_ep || !desc || ep->desc
|| _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT)
return -EINVAL;
dev = ep->dev;
if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
return -ESHUTDOWN;
max = usb_endpoint_maxp(desc) & 0x1fff;
local_irq_save (flags);
_ep->maxpacket = max & 0x7ff;
ep->desc = desc;
ep->halted = 0;
ep->bEndpointAddress = desc->bEndpointAddress;
/* set max packet */
udc_write(ep->num, S3C2410_UDC_INDEX_REG);
udc_write(max >> 3, S3C2410_UDC_MAXP_REG);
/* set type, direction, address; reset fifo counters */
if (desc->bEndpointAddress & USB_DIR_IN) {
csr1 = S3C2410_UDC_ICSR1_FFLUSH|S3C2410_UDC_ICSR1_CLRDT;
csr2 = S3C2410_UDC_ICSR2_MODEIN|S3C2410_UDC_ICSR2_DMAIEN;
udc_write(ep->num, S3C2410_UDC_INDEX_REG);
udc_write(csr1, S3C2410_UDC_IN_CSR1_REG);
udc_write(ep->num, S3C2410_UDC_INDEX_REG);
udc_write(csr2, S3C2410_UDC_IN_CSR2_REG);
} else {
/* don't flush in fifo or it will cause endpoint interrupt */
csr1 = S3C2410_UDC_ICSR1_CLRDT;
csr2 = S3C2410_UDC_ICSR2_DMAIEN;
udc_write(ep->num, S3C2410_UDC_INDEX_REG);
udc_write(csr1, S3C2410_UDC_IN_CSR1_REG);
udc_write(ep->num, S3C2410_UDC_INDEX_REG);
udc_write(csr2, S3C2410_UDC_IN_CSR2_REG);
csr1 = S3C2410_UDC_OCSR1_FFLUSH | S3C2410_UDC_OCSR1_CLRDT;
csr2 = S3C2410_UDC_OCSR2_DMAIEN;
udc_write(ep->num, S3C2410_UDC_INDEX_REG);
udc_write(csr1, S3C2410_UDC_OUT_CSR1_REG);
udc_write(ep->num, S3C2410_UDC_INDEX_REG);
udc_write(csr2, S3C2410_UDC_OUT_CSR2_REG);
}
/* enable irqs */
int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG);
udc_write(int_en_reg | (1 << ep->num), S3C2410_UDC_EP_INT_EN_REG);
/* print some debug message */
tmp = desc->bEndpointAddress;
dprintk (DEBUG_NORMAL, "enable %s(%d) ep%x%s-blk max %02x\n",
_ep->name,ep->num, tmp,
desc->bEndpointAddress & USB_DIR_IN ? "in" : "out", max);
local_irq_restore (flags);
s3c2410_udc_set_halt(_ep, 0);
return 0;
}
/*
* s3c2410_udc_ep_disable
*/
static int s3c2410_udc_ep_disable(struct usb_ep *_ep)
{
struct s3c2410_ep *ep = to_s3c2410_ep(_ep);
unsigned long flags;
u32 int_en_reg;
if (!_ep || !ep->desc) {
dprintk(DEBUG_NORMAL, "%s not enabled\n",
_ep ? ep->ep.name : NULL);
return -EINVAL;
}
local_irq_save(flags);
dprintk(DEBUG_NORMAL, "ep_disable: %s\n", _ep->name);
ep->desc = NULL;
ep->halted = 1;
s3c2410_udc_nuke (ep->dev, ep, -ESHUTDOWN);
/* disable irqs */
int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG);
udc_write(int_en_reg & ~(1<<ep->num), S3C2410_UDC_EP_INT_EN_REG);
local_irq_restore(flags);
dprintk(DEBUG_NORMAL, "%s disabled\n", _ep->name);
return 0;
}
/*
* s3c2410_udc_alloc_request
*/
static struct usb_request *
s3c2410_udc_alloc_request(struct usb_ep *_ep, gfp_t mem_flags)
{
struct s3c2410_request *req;
dprintk(DEBUG_VERBOSE,"%s(%p,%d)\n", __func__, _ep, mem_flags);
if (!_ep)
return NULL;
req = kzalloc (sizeof(struct s3c2410_request), mem_flags);
if (!req)
return NULL;
INIT_LIST_HEAD (&req->queue);
return &req->req;
}
/*
* s3c2410_udc_free_request
*/
static void
s3c2410_udc_free_request(struct usb_ep *_ep, struct usb_request *_req)
{
struct s3c2410_ep *ep = to_s3c2410_ep(_ep);
struct s3c2410_request *req = to_s3c2410_req(_req);
dprintk(DEBUG_VERBOSE, "%s(%p,%p)\n", __func__, _ep, _req);
if (!ep || !_req || (!ep->desc && _ep->name != ep0name))
return;
WARN_ON (!list_empty (&req->queue));
kfree(req);
}
/*
* s3c2410_udc_queue
*/
static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req,
gfp_t gfp_flags)
{
struct s3c2410_request *req = to_s3c2410_req(_req);
struct s3c2410_ep *ep = to_s3c2410_ep(_ep);
struct s3c2410_udc *dev;
u32 ep_csr = 0;
int fifo_count = 0;
unsigned long flags;
if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) {
dprintk(DEBUG_NORMAL, "%s: invalid args\n", __func__);
return -EINVAL;
}
dev = ep->dev;
if (unlikely (!dev->driver
|| dev->gadget.speed == USB_SPEED_UNKNOWN)) {
return -ESHUTDOWN;
}
local_irq_save (flags);
if (unlikely(!_req || !_req->complete
|| !_req->buf || !list_empty(&req->queue))) {
if (!_req)
dprintk(DEBUG_NORMAL, "%s: 1 X X X\n", __func__);
else {
dprintk(DEBUG_NORMAL, "%s: 0 %01d %01d %01d\n",
__func__, !_req->complete,!_req->buf,
!list_empty(&req->queue));
}
local_irq_restore(flags);
return -EINVAL;
}
_req->status = -EINPROGRESS;
_req->actual = 0;
dprintk(DEBUG_VERBOSE, "%s: ep%x len %d\n",
__func__, ep->bEndpointAddress, _req->length);
if (ep->bEndpointAddress) {
udc_write(ep->bEndpointAddress & 0x7F, S3C2410_UDC_INDEX_REG);
ep_csr = udc_read((ep->bEndpointAddress & USB_DIR_IN)
? S3C2410_UDC_IN_CSR1_REG
: S3C2410_UDC_OUT_CSR1_REG);
fifo_count = s3c2410_udc_fifo_count_out();
} else {
udc_write(0, S3C2410_UDC_INDEX_REG);
ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG);
fifo_count = s3c2410_udc_fifo_count_out();
}
/* kickstart this i/o queue? */
if (list_empty(&ep->queue) && !ep->halted) {
if (ep->bEndpointAddress == 0 /* ep0 */) {
switch (dev->ep0state) {
case EP0_IN_DATA_PHASE:
if (!(ep_csr&S3C2410_UDC_EP0_CSR_IPKRDY)
&& s3c2410_udc_write_fifo(ep,
req)) {
dev->ep0state = EP0_IDLE;
req = NULL;
}
break;
case EP0_OUT_DATA_PHASE:
if ((!_req->length)
|| ((ep_csr & S3C2410_UDC_OCSR1_PKTRDY)
&& s3c2410_udc_read_fifo(ep,
req))) {
dev->ep0state = EP0_IDLE;
req = NULL;
}
break;
default:
local_irq_restore(flags);
return -EL2HLT;
}
} else if ((ep->bEndpointAddress & USB_DIR_IN) != 0
&& (!(ep_csr&S3C2410_UDC_OCSR1_PKTRDY))
&& s3c2410_udc_write_fifo(ep, req)) {
req = NULL;
} else if ((ep_csr & S3C2410_UDC_OCSR1_PKTRDY)
&& fifo_count
&& s3c2410_udc_read_fifo(ep, req)) {
req = NULL;
}
}
/* pio or dma irq handler advances the queue. */
if (likely (req != 0))
list_add_tail(&req->queue, &ep->queue);
local_irq_restore(flags);
dprintk(DEBUG_VERBOSE, "%s ok\n", __func__);
return 0;
}
/*
* s3c2410_udc_dequeue
*/
static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req)
{
struct s3c2410_ep *ep = to_s3c2410_ep(_ep);
struct s3c2410_udc *udc;
int retval = -EINVAL;
unsigned long flags;
struct s3c2410_request *req = NULL;
dprintk(DEBUG_VERBOSE, "%s(%p,%p)\n", __func__, _ep, _req);
if (!the_controller->driver)
return -ESHUTDOWN;
if (!_ep || !_req)
return retval;
udc = to_s3c2410_udc(ep->gadget);
local_irq_save (flags);
list_for_each_entry (req, &ep->queue, queue) {
if (&req->req == _req) {
list_del_init (&req->queue);
_req->status = -ECONNRESET;
retval = 0;
break;
}
}
if (retval == 0) {
dprintk(DEBUG_VERBOSE,
"dequeued req %p from %s, len %d buf %p\n",
req, _ep->name, _req->length, _req->buf);
s3c2410_udc_done(ep, req, -ECONNRESET);
}
local_irq_restore (flags);
return retval;
}
/*
* s3c2410_udc_set_halt
*/
static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value)
{
struct s3c2410_ep *ep = to_s3c2410_ep(_ep);
u32 ep_csr = 0;
unsigned long flags;
u32 idx;
if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) {
dprintk(DEBUG_NORMAL, "%s: inval 2\n", __func__);
return -EINVAL;
}
local_irq_save (flags);
idx = ep->bEndpointAddress & 0x7F;
if (idx == 0) {
s3c2410_udc_set_ep0_ss(base_addr);
s3c2410_udc_set_ep0_de_out(base_addr);
} else {
udc_write(idx, S3C2410_UDC_INDEX_REG);
ep_csr = udc_read((ep->bEndpointAddress &USB_DIR_IN)
? S3C2410_UDC_IN_CSR1_REG
: S3C2410_UDC_OUT_CSR1_REG);
if ((ep->bEndpointAddress & USB_DIR_IN) != 0) {
if (value)
udc_write(ep_csr | S3C2410_UDC_ICSR1_SENDSTL,
S3C2410_UDC_IN_CSR1_REG);
else {
ep_csr &= ~S3C2410_UDC_ICSR1_SENDSTL;
udc_write(ep_csr, S3C2410_UDC_IN_CSR1_REG);
ep_csr |= S3C2410_UDC_ICSR1_CLRDT;
udc_write(ep_csr, S3C2410_UDC_IN_CSR1_REG);
}
} else {
if (value)
udc_write(ep_csr | S3C2410_UDC_OCSR1_SENDSTL,
S3C2410_UDC_OUT_CSR1_REG);
else {
ep_csr &= ~S3C2410_UDC_OCSR1_SENDSTL;
udc_write(ep_csr, S3C2410_UDC_OUT_CSR1_REG);
ep_csr |= S3C2410_UDC_OCSR1_CLRDT;
udc_write(ep_csr, S3C2410_UDC_OUT_CSR1_REG);
}
}
}
ep->halted = value ? 1 : 0;
local_irq_restore (flags);
return 0;
}
static const struct usb_ep_ops s3c2410_ep_ops = {
.enable = s3c2410_udc_ep_enable,
.disable = s3c2410_udc_ep_disable,
.alloc_request = s3c2410_udc_alloc_request,
.free_request = s3c2410_udc_free_request,
.queue = s3c2410_udc_queue,
.dequeue = s3c2410_udc_dequeue,
.set_halt = s3c2410_udc_set_halt,
};
/*------------------------- usb_gadget_ops ----------------------------------*/
/*
* s3c2410_udc_get_frame
*/
static int s3c2410_udc_get_frame(struct usb_gadget *_gadget)
{
int tmp;
dprintk(DEBUG_VERBOSE, "%s()\n", __func__);
tmp = udc_read(S3C2410_UDC_FRAME_NUM2_REG) << 8;
tmp |= udc_read(S3C2410_UDC_FRAME_NUM1_REG);
return tmp;
}
/*
* s3c2410_udc_wakeup
*/
static int s3c2410_udc_wakeup(struct usb_gadget *_gadget)
{
dprintk(DEBUG_NORMAL, "%s()\n", __func__);
return 0;
}
/*
* s3c2410_udc_set_selfpowered
*/
static int s3c2410_udc_set_selfpowered(struct usb_gadget *gadget, int value)
{
struct s3c2410_udc *udc = to_s3c2410_udc(gadget);
dprintk(DEBUG_NORMAL, "%s()\n", __func__);
if (value)
udc->devstatus |= (1 << USB_DEVICE_SELF_POWERED);
else
udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
return 0;
}
static void s3c2410_udc_disable(struct s3c2410_udc *dev);
static void s3c2410_udc_enable(struct s3c2410_udc *dev);
static int s3c2410_udc_set_pullup(struct s3c2410_udc *udc, int is_on)
{
dprintk(DEBUG_NORMAL, "%s()\n", __func__);
if (udc_info && (udc_info->udc_command ||
gpio_is_valid(udc_info->pullup_pin))) {
if (is_on)
s3c2410_udc_enable(udc);
else {
if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
if (udc->driver && udc->driver->disconnect)
udc->driver->disconnect(&udc->gadget);
}
s3c2410_udc_disable(udc);
}
}
else
return -EOPNOTSUPP;
return 0;
}
static int s3c2410_udc_vbus_session(struct usb_gadget *gadget, int is_active)
{
struct s3c2410_udc *udc = to_s3c2410_udc(gadget);
dprintk(DEBUG_NORMAL, "%s()\n", __func__);
udc->vbus = (is_active != 0);
s3c2410_udc_set_pullup(udc, is_active);
return 0;
}
static int s3c2410_udc_pullup(struct usb_gadget *gadget, int is_on)
{
struct s3c2410_udc *udc = to_s3c2410_udc(gadget);
dprintk(DEBUG_NORMAL, "%s()\n", __func__);
s3c2410_udc_set_pullup(udc, is_on ? 0 : 1);
return 0;
}
static irqreturn_t s3c2410_udc_vbus_irq(int irq, void *_dev)
{
struct s3c2410_udc *dev = _dev;
unsigned int value;
dprintk(DEBUG_NORMAL, "%s()\n", __func__);
value = gpio_get_value(udc_info->vbus_pin) ? 1 : 0;
if (udc_info->vbus_pin_inverted)
value = !value;
if (value != dev->vbus)
s3c2410_udc_vbus_session(&dev->gadget, value);
return IRQ_HANDLED;
}
static int s3c2410_vbus_draw(struct usb_gadget *_gadget, unsigned ma)
{
dprintk(DEBUG_NORMAL, "%s()\n", __func__);
if (udc_info && udc_info->vbus_draw) {
udc_info->vbus_draw(ma);
return 0;
}
return -ENOTSUPP;
}
static int s3c2410_udc_start(struct usb_gadget_driver *driver,
int (*bind)(struct usb_gadget *));
static int s3c2410_udc_stop(struct usb_gadget_driver *driver);
static const struct usb_gadget_ops s3c2410_ops = {
.get_frame = s3c2410_udc_get_frame,
.wakeup = s3c2410_udc_wakeup,
.set_selfpowered = s3c2410_udc_set_selfpowered,
.pullup = s3c2410_udc_pullup,
.vbus_session = s3c2410_udc_vbus_session,
.vbus_draw = s3c2410_vbus_draw,
.start = s3c2410_udc_start,
.stop = s3c2410_udc_stop,
};
static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd)
{
if (!udc_info)
return;
if (udc_info->udc_command) {
udc_info->udc_command(cmd);
} else if (gpio_is_valid(udc_info->pullup_pin)) {
int value;
switch (cmd) {
case S3C2410_UDC_P_ENABLE:
value = 1;
break;
case S3C2410_UDC_P_DISABLE:
value = 0;
break;
default:
return;
}
value ^= udc_info->pullup_pin_inverted;
gpio_set_value(udc_info->pullup_pin, value);
}
}
/*------------------------- gadget driver handling---------------------------*/
/*
* s3c2410_udc_disable
*/
static void s3c2410_udc_disable(struct s3c2410_udc *dev)
{
dprintk(DEBUG_NORMAL, "%s()\n", __func__);
/* Disable all interrupts */
udc_write(0x00, S3C2410_UDC_USB_INT_EN_REG);
udc_write(0x00, S3C2410_UDC_EP_INT_EN_REG);
/* Clear the interrupt registers */
udc_write(S3C2410_UDC_USBINT_RESET
| S3C2410_UDC_USBINT_RESUME
| S3C2410_UDC_USBINT_SUSPEND,
S3C2410_UDC_USB_INT_REG);
udc_write(0x1F, S3C2410_UDC_EP_INT_REG);
/* Good bye, cruel world */
s3c2410_udc_command(S3C2410_UDC_P_DISABLE);
/* Set speed to unknown */
dev->gadget.speed = USB_SPEED_UNKNOWN;
}
/*
* s3c2410_udc_reinit
*/
static void s3c2410_udc_reinit(struct s3c2410_udc *dev)
{
u32 i;
/* device/ep0 records init */
INIT_LIST_HEAD (&dev->gadget.ep_list);
INIT_LIST_HEAD (&dev->gadget.ep0->ep_list);
dev->ep0state = EP0_IDLE;
for (i = 0; i < S3C2410_ENDPOINTS; i++) {
struct s3c2410_ep *ep = &dev->ep[i];
if (i != 0)
list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
ep->dev = dev;
ep->desc = NULL;
ep->halted = 0;
INIT_LIST_HEAD (&ep->queue);
}
}
/*
* s3c2410_udc_enable
*/
static void s3c2410_udc_enable(struct s3c2410_udc *dev)
{
int i;
dprintk(DEBUG_NORMAL, "s3c2410_udc_enable called\n");
/* dev->gadget.speed = USB_SPEED_UNKNOWN; */
dev->gadget.speed = USB_SPEED_FULL;
/* Set MAXP for all endpoints */
for (i = 0; i < S3C2410_ENDPOINTS; i++) {
udc_write(i, S3C2410_UDC_INDEX_REG);
udc_write((dev->ep[i].ep.maxpacket & 0x7ff) >> 3,
S3C2410_UDC_MAXP_REG);
}
/* Set default power state */
udc_write(DEFAULT_POWER_STATE, S3C2410_UDC_PWR_REG);
/* Enable reset and suspend interrupt interrupts */
udc_write(S3C2410_UDC_USBINT_RESET | S3C2410_UDC_USBINT_SUSPEND,
S3C2410_UDC_USB_INT_EN_REG);
/* Enable ep0 interrupt */
udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_EN_REG);
/* time to say "hello, world" */
s3c2410_udc_command(S3C2410_UDC_P_ENABLE);
}
static int s3c2410_udc_start(struct usb_gadget_driver *driver,
int (*bind)(struct usb_gadget *))
{
struct s3c2410_udc *udc = the_controller;
int retval;
dprintk(DEBUG_NORMAL, "%s() '%s'\n", __func__, driver->driver.name);
/* Sanity checks */
if (!udc)
return -ENODEV;
if (udc->driver)
return -EBUSY;
if (!bind || !driver->setup || driver->max_speed < USB_SPEED_FULL) {
printk(KERN_ERR "Invalid driver: bind %p setup %p speed %d\n",
bind, driver->setup, driver->max_speed);
return -EINVAL;
}
#if defined(MODULE)
if (!driver->unbind) {
printk(KERN_ERR "Invalid driver: no unbind method\n");
return -EINVAL;
}
#endif
/* Hook the driver */
udc->driver = driver;
udc->gadget.dev.driver = &driver->driver;
/* Bind the driver */
if ((retval = device_add(&udc->gadget.dev)) != 0) {
printk(KERN_ERR "Error in device_add() : %d\n",retval);
goto register_error;
}
dprintk(DEBUG_NORMAL, "binding gadget driver '%s'\n",
driver->driver.name);
if ((retval = bind(&udc->gadget)) != 0) {
device_del(&udc->gadget.dev);
goto register_error;
}
/* Enable udc */
s3c2410_udc_enable(udc);
return 0;
register_error:
udc->driver = NULL;
udc->gadget.dev.driver = NULL;
return retval;
}
static int s3c2410_udc_stop(struct usb_gadget_driver *driver)
{
struct s3c2410_udc *udc = the_controller;
if (!udc)
return -ENODEV;
if (!driver || driver != udc->driver || !driver->unbind)
return -EINVAL;
dprintk(DEBUG_NORMAL, "usb_gadget_unregister_driver() '%s'\n",
driver->driver.name);
/* report disconnect */
if (driver->disconnect)
driver->disconnect(&udc->gadget);
driver->unbind(&udc->gadget);
device_del(&udc->gadget.dev);
udc->driver = NULL;
/* Disable udc */
s3c2410_udc_disable(udc);
return 0;
}
/*---------------------------------------------------------------------------*/
static struct s3c2410_udc memory = {
.gadget = {
.ops = &s3c2410_ops,
.ep0 = &memory.ep[0].ep,
.name = gadget_name,
.dev = {
.init_name = "gadget",
},
},
/* control endpoint */
.ep[0] = {
.num = 0,
.ep = {
.name = ep0name,
.ops = &s3c2410_ep_ops,
.maxpacket = EP0_FIFO_SIZE,
},
.dev = &memory,
},
/* first group of endpoints */
.ep[1] = {
.num = 1,
.ep = {
.name = "ep1-bulk",
.ops = &s3c2410_ep_ops,
.maxpacket = EP_FIFO_SIZE,
},
.dev = &memory,
.fifo_size = EP_FIFO_SIZE,
.bEndpointAddress = 1,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
},
.ep[2] = {
.num = 2,
.ep = {
.name = "ep2-bulk",
.ops = &s3c2410_ep_ops,
.maxpacket = EP_FIFO_SIZE,
},
.dev = &memory,
.fifo_size = EP_FIFO_SIZE,
.bEndpointAddress = 2,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
},
.ep[3] = {
.num = 3,
.ep = {
.name = "ep3-bulk",
.ops = &s3c2410_ep_ops,
.maxpacket = EP_FIFO_SIZE,
},
.dev = &memory,
.fifo_size = EP_FIFO_SIZE,
.bEndpointAddress = 3,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
},
.ep[4] = {
.num = 4,
.ep = {
.name = "ep4-bulk",
.ops = &s3c2410_ep_ops,
.maxpacket = EP_FIFO_SIZE,
},
.dev = &memory,
.fifo_size = EP_FIFO_SIZE,
.bEndpointAddress = 4,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
}
};
/*
* probe - binds to the platform device
*/
static int s3c2410_udc_probe(struct platform_device *pdev)
{
struct s3c2410_udc *udc = &memory;
struct device *dev = &pdev->dev;
int retval;
int irq;
dev_dbg(dev, "%s()\n", __func__);
usb_bus_clock = clk_get(NULL, "usb-bus-gadget");
if (IS_ERR(usb_bus_clock)) {
dev_err(dev, "failed to get usb bus clock source\n");
return PTR_ERR(usb_bus_clock);
}
clk_enable(usb_bus_clock);
udc_clock = clk_get(NULL, "usb-device");
if (IS_ERR(udc_clock)) {
dev_err(dev, "failed to get udc clock source\n");
return PTR_ERR(udc_clock);
}
clk_enable(udc_clock);
mdelay(10);
dev_dbg(dev, "got and enabled clocks\n");
if (strncmp(pdev->name, "s3c2440", 7) == 0) {
dev_info(dev, "S3C2440: increasing FIFO to 128 bytes\n");
memory.ep[1].fifo_size = S3C2440_EP_FIFO_SIZE;
memory.ep[2].fifo_size = S3C2440_EP_FIFO_SIZE;
memory.ep[3].fifo_size = S3C2440_EP_FIFO_SIZE;
memory.ep[4].fifo_size = S3C2440_EP_FIFO_SIZE;
}
spin_lock_init (&udc->lock);
udc_info = pdev->dev.platform_data;
rsrc_start = S3C2410_PA_USBDEV;
rsrc_len = S3C24XX_SZ_USBDEV;
if (!request_mem_region(rsrc_start, rsrc_len, gadget_name))
return -EBUSY;
base_addr = ioremap(rsrc_start, rsrc_len);
if (!base_addr) {
retval = -ENOMEM;
goto err_mem;
}
device_initialize(&udc->gadget.dev);
udc->gadget.dev.parent = &pdev->dev;
udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
the_controller = udc;
platform_set_drvdata(pdev, udc);
s3c2410_udc_disable(udc);
s3c2410_udc_reinit(udc);
/* irq setup after old hardware state is cleaned up */
retval = request_irq(IRQ_USBD, s3c2410_udc_irq,
0, gadget_name, udc);
if (retval != 0) {
dev_err(dev, "cannot get irq %i, err %d\n", IRQ_USBD, retval);
retval = -EBUSY;
goto err_map;
}
dev_dbg(dev, "got irq %i\n", IRQ_USBD);
if (udc_info && udc_info->vbus_pin > 0) {
retval = gpio_request(udc_info->vbus_pin, "udc vbus");
if (retval < 0) {
dev_err(dev, "cannot claim vbus pin\n");
goto err_int;
}
irq = gpio_to_irq(udc_info->vbus_pin);
if (irq < 0) {
dev_err(dev, "no irq for gpio vbus pin\n");
goto err_gpio_claim;
}
retval = request_irq(irq, s3c2410_udc_vbus_irq,
IRQF_TRIGGER_RISING
| IRQF_TRIGGER_FALLING | IRQF_SHARED,
gadget_name, udc);
if (retval != 0) {
dev_err(dev, "can't get vbus irq %d, err %d\n",
irq, retval);
retval = -EBUSY;
goto err_gpio_claim;
}
dev_dbg(dev, "got irq %i\n", irq);
} else {
udc->vbus = 1;
}
if (udc_info && !udc_info->udc_command &&
gpio_is_valid(udc_info->pullup_pin)) {
retval = gpio_request_one(udc_info->pullup_pin,
udc_info->vbus_pin_inverted ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
"udc pullup");
if (retval)
goto err_vbus_irq;
}
retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
if (retval)
goto err_add_udc;
if (s3c2410_udc_debugfs_root) {
udc->regs_info = debugfs_create_file("registers", S_IRUGO,
s3c2410_udc_debugfs_root,
udc, &s3c2410_udc_debugfs_fops);
if (!udc->regs_info)
dev_warn(dev, "debugfs file creation failed\n");
}
dev_dbg(dev, "probe ok\n");
return 0;
err_add_udc:
if (udc_info && !udc_info->udc_command &&
gpio_is_valid(udc_info->pullup_pin))
gpio_free(udc_info->pullup_pin);
err_vbus_irq:
if (udc_info && udc_info->vbus_pin > 0)
free_irq(gpio_to_irq(udc_info->vbus_pin), udc);
err_gpio_claim:
if (udc_info && udc_info->vbus_pin > 0)
gpio_free(udc_info->vbus_pin);
err_int:
free_irq(IRQ_USBD, udc);
err_map:
iounmap(base_addr);
err_mem:
release_mem_region(rsrc_start, rsrc_len);
return retval;
}
/*
* s3c2410_udc_remove
*/
static int s3c2410_udc_remove(struct platform_device *pdev)
{
struct s3c2410_udc *udc = platform_get_drvdata(pdev);
unsigned int irq;
dev_dbg(&pdev->dev, "%s()\n", __func__);
usb_del_gadget_udc(&udc->gadget);
if (udc->driver)
return -EBUSY;
debugfs_remove(udc->regs_info);
if (udc_info && !udc_info->udc_command &&
gpio_is_valid(udc_info->pullup_pin))
gpio_free(udc_info->pullup_pin);
if (udc_info && udc_info->vbus_pin > 0) {
irq = gpio_to_irq(udc_info->vbus_pin);
free_irq(irq, udc);
}
free_irq(IRQ_USBD, udc);
iounmap(base_addr);
release_mem_region(rsrc_start, rsrc_len);
platform_set_drvdata(pdev, NULL);
if (!IS_ERR(udc_clock) && udc_clock != NULL) {
clk_disable(udc_clock);
clk_put(udc_clock);
udc_clock = NULL;
}
if (!IS_ERR(usb_bus_clock) && usb_bus_clock != NULL) {
clk_disable(usb_bus_clock);
clk_put(usb_bus_clock);
usb_bus_clock = NULL;
}
dev_dbg(&pdev->dev, "%s: remove ok\n", __func__);
return 0;
}
#ifdef CONFIG_PM
static int s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message)
{
s3c2410_udc_command(S3C2410_UDC_P_DISABLE);
return 0;
}
static int s3c2410_udc_resume(struct platform_device *pdev)
{
s3c2410_udc_command(S3C2410_UDC_P_ENABLE);
return 0;
}
#else
#define s3c2410_udc_suspend NULL
#define s3c2410_udc_resume NULL
#endif
static const struct platform_device_id s3c_udc_ids[] = {
{ "s3c2410-usbgadget", },
{ "s3c2440-usbgadget", },
{ }
};
MODULE_DEVICE_TABLE(platform, s3c_udc_ids);
static struct platform_driver udc_driver_24x0 = {
.driver = {
.name = "s3c24x0-usbgadget",
.owner = THIS_MODULE,
},
.probe = s3c2410_udc_probe,
.remove = s3c2410_udc_remove,
.suspend = s3c2410_udc_suspend,
.resume = s3c2410_udc_resume,
.id_table = s3c_udc_ids,
};
static int __init udc_init(void)
{
int retval;
dprintk(DEBUG_NORMAL, "%s: version %s\n", gadget_name, DRIVER_VERSION);
s3c2410_udc_debugfs_root = debugfs_create_dir(gadget_name, NULL);
if (IS_ERR(s3c2410_udc_debugfs_root)) {
printk(KERN_ERR "%s: debugfs dir creation failed %ld\n",
gadget_name, PTR_ERR(s3c2410_udc_debugfs_root));
s3c2410_udc_debugfs_root = NULL;
}
retval = platform_driver_register(&udc_driver_24x0);
if (retval)
goto err;
return 0;
err:
debugfs_remove(s3c2410_udc_debugfs_root);
return retval;
}
static void __exit udc_exit(void)
{
platform_driver_unregister(&udc_driver_24x0);
debugfs_remove(s3c2410_udc_debugfs_root);
}
module_init(udc_init);
module_exit(udc_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");